Epson DFX-8500 инструкция обслуживания

[...]

[...]

9-Pin D ot Matrix Printer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in an y form or by any means, mechanical, photocopying, recording, or otherwise, without the prior w ritten permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect t o the use of the i[...]

FCC Compliance Stateme nt For United States Us ers This equipment has been tested and foun d to comply with the limits for a Class B d igital device, pursuant to Part 15 of the FCC R ules. These limits are designed t o provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can ra[...]

Declara tion of Conformity Acco rding t o I SO/ IEC Guid e 22 and EN 45 014 Man ufact urer : SEIK O EPSO N COR PORA TION Address: 3-5, Ow a 3-cho me, Suwa-sh i, Nagano-ken 392-8502 Japan Repre senta tive: EPSON EURO PE B.V. Add ress : Pro f. J. H. Bavi nckl aan 5 11 83 AT Amstelve en The Ne ther lands Declar es th at the Pro duct: Produc t Nam e: D[...]

Safety I nformation Impo rtant Safet y Inst ructi ons Before using the printer, read all of these instructions to make sure you use the printer safely and effective ly. Follow all warnings and instructions marke d on the printer. T Do not place the prin ter on a n unstable surfac e or near a radiator or h eat sourc e. T Place the printer on a flat [...]

T Unplug the printer and refer servicing to qualified service personnel under the f ollowing conditions: If t he po wer cord or pl ug is dam age d; if liq uid has ente red the p rinter; if t he pr inter ha s be en drop ped or the cabi net damaged; if the pr inter does not oper ate normally or exhibits a distinct change in performance. Adjust only t[...]

For United Kingdom Users Use of o ptions Epson (UK) Limited shall not be lia ble against any dam ages or problems arising from the use o f any optio ns or consumable products other than those designated as Original E PSON Products or EPSO N Approv ed Products by Epson (U K) Limite d. Safety in for mation w Warning: This appliance must be earthed. R[...]

Contents Introduction Feature s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-1 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-2 How to U se T hi s Ma nua l . . . . . . . . . . . . . . . . . . . . . . 0-2 Warnings, Ca utions, and Notes . . . . . . . . . . . . . . . . . . 0-3 If Yo u Ne ed H el p . . . [...]

For Windows NT 4.0 Users . . . . . . . . . . . . . . . . . . . . . 2-12 Inst alli ng t he p ri nter dr iver . . . . . . . . . . . . . . . . . . . 2-12 Acc essi ng the pr int er dri ver . . . . . . . . . . . . . . . . . . . 2-1 3 Chan ging the pri nt er d ri ver s ett ings . . . . . . . . . . . . . . 2-15 For Windows NT 3.5 x Users . . . . . . . . .[...]

Chapter 4 Using the Pri nter Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Li ghts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Other c ontrol pan el feat ures . . . . . . . . . . . . . . . . . . 4-8 Usin g DIP Swi tch es . . . .[...]

Chapter 6 Using Printer Options Usin g the Pu ll T ract or . . . . . . . . . . . . . . . . . . . . . . . . 6- 2 Inst alli ng t he p ul l tr acto r . . . . . . . . . . . . . . . . . . . . 6-2 Usin g the pu ll tr act or wit h the fro nt t ract or . . . . . . . . . . 6-5 Usin g the pu ll tr act or wit h the re ar tra ctor . . . . . . . . . . 6-9 Remo [...]

Chapter 8 Troubles hooting Usin g the E rro r Indic ato rs . . . . . . . . . . . . . . . . . . . . . 8-3 Prin ting a S elf Tes t . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Usin g th e He x D ump Mod e . . . . . . . . . . . . . . . . . . . . 8-6 Proble ms and Sol utions . . . . . . . . . . . . . . . . . . . . . . . 8-7 Power supply . . . [...]

Appendi x C Contacting Cust omer Support For Unit ed State s and Can ada Users . . . . . . . . . . . . . . . . C-2 For Unit ed Kingdom an d the Republic of Ir eland User s . . . . . C-4 Enquiry Desk . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4 Cus tom er S up por t . . . . . . . . . . . . . . . . . . . . . . . . C-4 Faxon EPSON . . . .[...]

Printer Par ts Proof Sign-off: Yano _______ Tavet ian _______ _______ paper sup port s* * sprockets** ** rear tractor unit parts prin t head rib bon c art rid ge top co ver paper b ail top cont rol pa nel power swit ch * front tractor unit parts spro cke ts* paper sup por ts* front cover front1 serial inte rface parallel inte rface rear cov er pap [...]

Intr oduction The EPSON DFX-8500 printer is an advanced dot matrix printer designed for busine ss applications. The printer combines high performance and r eliability with a wide r ange of features, including high speed printing and automa tic paper handling. Features T High speed draft mode printing of up to 1120 characte rs per seco nd (cps ) at [...]

Opt i on s The following options are available for your pr inter: T The Pull tractor (#8309) improves the handling of heavy multi-part forms and labels. It also enhances printing alignment on preprinted f orms. T The Perforation cutter (C81507 @ ) and Paper cutter (C81500 @ ) make it easier to handle continuous paper by cutting off printe d docu me[...]

Chapter 6 explains how to use optional acc essories with your printer. Chapter 7 provides printer maintenance and transportation guidelines. Chapter 8 cont ains troublesho oting tips. If the printer does n ot operate properly or the printed results are not what you e xpect, see this chapter for a list of problems and solutions. Appendix A gives the[...]

If You N eed Hel p If you need assistance in setting up or using your printer, see Appendix C for guid elines on how to get c ustomer support. L Peony Rev.C A5 size Introduction 98/01/ 07 pass 2 4 In troduc tion[...]

Chap ter 1 Setting Up the Printer Proof Sign-off: Yano _______ Tavet ian _______ Unpacking the P rinter . . . . . . . . . . . . . . . . . . . . . . . 1-2 Cho osi ng a Pla ce f or the Pr inte r . . . . . . . . . . . . . . . . . . 1 -4 Installi ng the Ribbon C artridge . . . . . . . . . . . . . . . . . . 1-6 Plu gg ing in t he Pri nt er . . . . . . .[...]

Unpacking the Printer Becau se th e prin ter we ighs ap proxi mately 29 kg (64 lbs), yo u shou ld n ot lift or carr y it alone . Two people sh ould c arry it by the bottom, as shown here: D-1-2 L Peony Rev.C A5 size Chapter 1 98/0 1/07 Pas s 4 1-2 Setting Up the Printer[...]

In addi tion to this guide, you r prin ter bo x sho uld in clude tw o EPSO N pri nter dri ver d iskette s, two St atus Moni tor soft ware disk ettes, a No tice Sheet , and the fol lowing items: Note: Dependin g on your pr inter model , the power cord may be permane ntly attached to the printer. Also the sh ape of the powe r cord plu g varies depe n[...]

You must remove al l protec tive mat erials pa cked aro und and insi de you r prin ter b efo re you set it up an d turn on th e powe r. Follo w the dire ctions on the Not ice Shee t to remo ve these mate rials. A sc rewdri ver has been in cluded for remov ing the trans porta tion scre w. Save al l packin g and prot ecti ve mater ials, includi ng th[...]

T Avoid el ectric al o utlets co ntro lled by w all swi tches or automa tic timers. An in terr uption of p ower can e rase info rmation in the memory o f you r prin ter or c omputer . T Avoid outlets on the same circ uit as larg e motor s or other ap plia nces that can caus e voltag e fluctu ations. T Keep the ent ire compu ter system aw ay from po[...]

Install ing the Ribbon Cart ridge Befo re i nstal ling t he r ibbo n ca rtri dge, make sure tha t th e protecti ve packin g materials ha ve been removed and th at the power cord is no t plug ged in to an el ectr ical out let. Remov e the ribbon cartri dge fro m the bo x and p lastic bag. Then follow these st eps: 1. Open th e top co ver as shown be[...]

2. Sl ide the pr int he ad to the op en sect ion of the pa per bail as shown be low. 3. Remo ve the sep arator from the m iddl e of the ribbon cartri dge and disca rd it. The n detach the ribbo n guide from th e cart ridge (but not from th e ribbon ) and tur n the rib bon -tigh teni ng knob in the di rect ion of th e arro w to take up any slack in [...]

4. Ho ld t he r ibbo n ca rtridg e wi th bo th h ands and lowe r it into t he p rinter as sh own below. Pull ing th e ca rtridg e towar d you, slide th e notc hes ne are st you ove r th e two corresp ondi ng pin s in the pr inter. Then push th e cartri dge down int o positio n until th e other tw o slots snap in to place over the mounti ng pin s in[...]

6. Insert the ribbon guid e ove r the metal pin s on each si de of the prin t head as shown bel ow. The smal ler en d of the guid e should be o n top, with its ang led edge fa cing back towa rd the pla ten. Tur n th e rib bon -tigh teni ng kn ob a gain to remo ve any s lack in th e rib bon. 7. Sl ide the pr int he ad from sid e to side to see that [...]

8. Clo se the to p cover . Plugging in the Pr inter 1. Make sur e the printe r is turned off. (The “  ” s ymbo l on the power switch locat ed on th e lowe r righ t side of th e prin ter should be pressed dow n.) 2. Ch eck th e lab el on th e bac k of the pr inte r to make sure the volt age mat ches that of y our el ectr ical o utle t. c Caut[...]

Connectin g the Printer to Your Computer Your pr inte r ha s two se para te i nterf ace connec tion s: a Centro nics ® c ompat ible parall el i nter face and an RS-23 2C- comp atible serial interfa ce. If y ou are not su re whi ch one i s require d by your c omputer , ch eck your comput er manu al. Note: Your printer has an auto interface mode fun[...]

Follo w the ste ps below to conn ect a pa rall el or seria l interfa ce cable to th e printe r. 1. Mak e sure both the pr inte r and com puter ar e turn ed off. 2. Open th e rear cover by grasp ing it on ea ch side and pulli ng down. 3. Plug th e cable conne ctor secure ly into th e printe r’s parall el or se rial int erfac e co nnecto r. rear co[...]

4. If you are co nnec ting the paralle l inte rface , squeez e the wire clip s togeth er until they lo ck in pl ace on eit her side of th e connec tor. If your cabl e has a gro und wi re, conn ect it to the printe r’s grou nd c onne ctor as s how n bel ow. If you ar e co nnecti ng the seri al int erface, faste n th e scr ews on the cable conn ect[...]

5. Open th e plastic clamp to the right or le ft of the interfa ce connec tors by pull ing out it s top tab. Inser t the cable in the plasti c clamp and clos e the clamp , as shown belo w. 6. C lose the rear cover. c Caut ion: Always cl ose the rear cove r befor e using the printe r. D-1-2 3-A D-1-2 3Bn L Peony Rev.C A5 size Chapter 1 98/0 1/07 Pas[...]

7. Plug the othe r end of th e cable int o the compu ter. (If th ere is a ground wire at the comp uter e nd o f the cabl e, a ttac h it to the groun d conn ecto r at t he ba ck of t he c omputer.) Before using the pr inter’s ser ial inte rface, you ne ed to sel ect serial commu nica tion by chang ing th e pr inter’s DIP swit ch settin gs. You m[...]

L Peony Rev.C A5 size Chapter 1 98/0 1/07 Pas s 4 1-16 Setting Up the Printer[...]

Chap ter 2 Setting Up Your Software Proof Sign-off: Yano _______ Tavet ian _______ _______ _______ For W ind ows 95 Us ers . . . . . . . . . . . . . . . . . . . . . . . 2 -2 Install ing th e printe r drive r using My Co mpu ter . . . . . . 2- 3 Install ing th e printe r drive r using plu g-and -play . . . . . . 2 -4 Accessing the pri nter driver . [...]

The EPSO N printe r software that com es with your pr inter includ es the pr inter dr iver softwa re, plus a sta tus moni tor utilit y and pa per memo ry utili ty for use wit h Wind ows 95. A printe r driv er is s oftwa re tha t allo ws your comput er to contro l th e pr inter. You ne ed t o insta ll t he p rinter dri ver so your softw are appl ica[...]

Installing the pri nter driver using My Comput er 1. Mak e sur e Wind ows 95 is runn ing an d the pr inte r is off . 2. Insert Disk 1 of your printe r driver soft ware in a disk dr ive. Doubl e-c lick t he My Computer icon, and th en dou ble-cl ick the dr ive in whic h you in ser ted th e disk. 3. Doubl e-click the Se tup .ex e icon , th en se le c[...]

Installing t he printer driver usi ng plug-and-pl ay If your c omputer has an I EEE-12 84 c ompatibl e, b idire ctio nal parall el por t, you can instal l the pr inter dr iver using the Windows 95 plug-and-p lay feature. See your computer docum entati on for more infor matio n. 1. Mak e sure the pr inter is co nnecte d to your co mpu ter as describ[...]

8. You ca n ty pe a uniq ue n ame fo r th e pr inte r in the pri nter name box in the Add Printe r Wiza rd dialo g box. We recommen d th at you k eep the model name as sh own. To use the pr inter as th e default print er for Wind ows 95 applic atio ns, se lect Yes . ( No is the defau lt setting. ) 9. Cl ick the Finish bu tton. The progra m cop ies [...]

Acc essi ng the print er driv er from Wi ndows appl icati ons To access the prin ter drive r from your Wi ndows app licati on, select Print Setup or Prin t fr om th e Fi le me nu. Th e Pr inte r or Print Setup dialo g box appe ars. From th e Prin t dialog box, choo se Printer , Setup , Properties , or Options , depending on the op tion s avai lable[...]

Paper me nu T Pa p er si z e Select the size of the paper loaded in the printer. If you don’t see your paper size, use the scroll bar to scroll through the list. If your paper size is not included in the list, click Custom and enter the correct paper size in the dialog box that appears. T Orie ntatio n Sel ect Portra it or Land scape . T Pape r s[...]

For Windows 3.1 Users If you a re us ing Wi ndow s 3.1, fol low the in structi ons belo w to install and access the prin ter driver. Installing t he printer driver 1. Make sure Windows 3. 1 is runn ing an d th e Progra m Mana ger wi ndow is ope n. 2. Inse rt Dis k 1 of you r prin ter dr ive r soft ware in a dis k drive . 3. Choos e Run from the Fi [...]

5. Sele ct you r printe r and clic k OK . Th e insta llatio n prog ram begins co pying th e printer dr iver files. Aft er a few moments, th e insta llatio n progra m creat es the EPSO N progr am grou p in Win dows. 6. When the i nstal lati on is comp lete, clic k OK to exit . Window s will now use the EPS ON DFX-8 500 pr inte r as its defaul t prin[...]

Acc essi ng the print er driv er from Wi ndows appl icati ons To access the pr inter dr iver from your wind ows app licati on, select Print Setup or Pri nt fr om the File menu . If you c hoose Print Setu p , you see you r appl icatio n’s Pr int Se tup di alog bo x, whe re y ou c an make se ttin gs f or pap er si ze, pape r sou rce, a nd orien tat[...]

Changing the printer driver set tings Before printin g, check tha t the prin ter drive r setting s are approp riate f or the kind of do cument yo u want to prin t, and change the settin gs as need ed. When you a re fini shed making chan ges, clic k OK to apply the sett ings, or cl ick Cancel to cancel your chan ges. If you acce sse d the pr inte r [...]

To acc ess the followi ng sett ings from y our ap plicat ion, y ou may ne ed to click Printer , Setup , Op tions , or some combin ation of th ese button s. If you accessed the dr iver fro m the Cont rol Pa nel, click Options to acce ss thes e sett ings . T Dither ing You can leave this opt ion set to Fine , which is the de fault sett ing, or sel ec[...]

3. Doubl e-click the Se tup .ex e icon , th en se le ct you r pr inte r icon in the EP SON Pr inte r Driv er Se tup di alog box show n below. Click OK and follow the on-screen instructions. Before you start pr inting , you sho uld mak e sure that the pri nter dri ver settin gs match you r docum ent requi remen ts. Whi le many W indows ap plicat ion[...]

Acc essi ng the print er driv er from Wi ndows appl icati ons To access the prin ter drive r from your Wi ndows app licati on, select Print Setup or Prin t fr om the File menu . If y ou cho ose Print Setu p , you see you r appl icatio n’s Pr int Se tup di alog bo x. If yo u choose Pri nt , yo u see you r appl icatio n’s Pr int di alog bo x. To [...]

Changing the printer driver set tings Before printin g, check tha t the prin ter drive r setting s on the Page Setup and Ad vance d men us ar e appr opriat e for the kind of d ocume nt y ou wan t to p rint , and chan ge sett ings as need ed. When you are finished making ch ange s, click OK to appl y the settin gs, or click Cancel to re turn the se [...]

T Docum ent Dou ble-cl ick Halftone Col or Adjus tment to Optio ns open this di alog box. Click Print Qualit y and select Lette r Qua lity or Draft Quality . Clic k Print Text a s Grap hics or Met afile Sp ooling and sele ct On or Off in each list bo x. After yo u’ve checked your prin ter drive r setti ngs, you ar e rea dy to prin t. If yo u hav [...]

4. In the co mman d line box, type A:SET UP , and click OK . If you inser ted th e driver di sk in a dri ve othe r than “A ”, substitu te the a ppropr iate l etter. 5. Sele ct you r printe r icon in th e EPSON Pr inte r Driver Se tup dialog box a s show n be low. Clic k OK a nd follow the on-scree n instr uctions . Before you start pr inting ,[...]

Acc essi ng the print er driv er from Wi ndows appl icati ons To access the prin ter drive r from your Wi ndows app licati on, select Print Setup or Prin t fr om th e File menu . Th e Pr int or Pri nt Setup di alog box appears. Mak e sure that your prin ter is sele cted a nd the n cl ick Prin ter , Setup , Proper ties , or Options . You may ne ed t[...]

3. Cl ick the De ta ils button , th en c lick J ob D efaul t . You see the Docu ment Pr operti es dialog box, wh ich in clud es the Form an d Orient atio n setti ngs des crib ed belo w. If you w ant to access the for m sour ce sett ings, c lick t he Set Up button inst ead of th e De ta ils bu tton. You see the Printe r Setu p dialog box, whic h inc[...]

Doc ument Pr operties dialog box T Form Selec t the kind of form lo aded in the pr inter. If you don’t see your form , select it fro m the Form li st. T Orient atio n Sel ect Portra it or Lands cape . The diag ram on th e sc reen cha nges ac cordin g to the orie ntatio n you sel ect. Adv anced D ocumen t Proper ties d ialog box T Graph ics Click [...]

For DOS Program Users If y ou are us ing DOS pr ogra ms (n ot Win dows appl icat ions), follo w the in str ucti ons be low to inst all th e prin ter dr ive r. Installing the pri nter driver To inst all a pr inte r driv er in most DO S applic atio ns, you mu st select the p rinter you a re us ing du ring the i nstalla tion o r set up proced ure. Cho[...]

L Peony Rev.C A5 size Chapter 2 98/0 1/07 Pas s 4 2-22 Setting Up Your Software[...]

Chap ter 3 Paper Handling Proof Sign-off: Yano _______ Tavet ian _______ Usi ng the Two -Tr acto r Sy ste m . . . . . . . . . . . . . . . . . . . 3- 2 Pos iti onin g the pa per s upp ly . . . . . . . . . . . . . . . . . 3- 2 Wha t pape r ty pes you can us e . . . . . . . . . . . . . . . . . 3 -3 Loa di ng Pap er ont o the Fr ont Tr actor . . . . . [...]

Using the Two-Tractor System Your pr inter’s pape r hand ling system consist s of a fron t push tract or and a rear pu sh trac tor. Both trac tors are ea sy to loa d and ope rate , and b oth ac commod ate a wide vari ety of pa per types, in clud ing label s and mult i-par t forms. The pr inter automa tica lly adj usts to the th ickn ess of yo ur [...]

The foll owing il lustrat ion shows th ree ways to positi on your pri nter a nd p aper: with the fr ont tracto r lo aded , wi th the rear tracto r lo aded , and with bo th t ractor s loa ded. Note: Mak e sure th at your stack of pr inted pa ges does not inte rfere wit h the re ar trac tor ’s pape r supp ly. What paper types you can use You can us[...]

Loading Pa per onto the Front Tra ctor Follow thes e steps to l oad pa per onto t he front trac tor: 1. Turn o ff t he p rint er, then ope n th e pr inte r’s front cov er by lifti ng up the mid dle of it s bottom ed ge until it locks in plac e, as show n bel ow. 2. Release the sprocket lock lever s on both the ri ght and le ft sprocke ts by pulli[...]

3. Position t he left sprock et so t hat th e spr ocket pins are to the le ft of the ar row mark on the scal e. Lock it into plac e by push ing up the sprock et l ock le ver. 4. Now slide th e righ t sproc ket to approx imate ly match th e wid th of your pape r. (Do not lock it in pla ce yet .) arrow mark on the s cale D-1- 13-A D-1- 13-B 3 R Peony[...]

5. Slide the tw o pa per support s so t hat th ey a re sp aced e ven ly betwee n the tw o sprocke ts. 6. Open bo th sp rock et cov ers. paper sup port s D-1-1 4-A sprocket cover D-1-1 4-B L Peony Rev.C A5 size Chapter 3 98/0 1/07 Pas s 4 3-6 P aper Handling[...]

7. Be su re you r pape r ha s a cle an, strai ght edge, and then fi t the first five holes in the pa per over th e sprocke t pins as shown bel ow. The sid e of the pa per that you want to print on shou ld be fa cing you. Now cl ose t he spro cket c overs. 8. Sl ide the ri ght sprocke t so that t he p aper i s stra ight and has no wrin kles. Loc k t[...]

9. Pull th e printe r’s front cover ou t slightl y and lo wer it unt il it is closed. c Caution: T Do not push the front co ver direc tly down; always pull it out slightly before closing. T Before turning on the printer, be absolutely sure you have removed all protective materi als. (Se e the No tice Sheet for instructions.) Turning on the printe[...]

11. Check t he Tractor Select indica tor to see whic h trac tor is selected: T If the fron t trac tor ar row li ght is re d, press the LF/FF Load but ton to load the paper. T If the rea r trac tor arro w ligh t is re d, pre ss the Front/Rear button to switc h to the fron t tr acto r. When the pri nter swit ches trac tors, it al so load s the pape r[...]

Loading Paper onto the Rear Tractor Follow the st eps be low to load pape r onto the r ear tr actor. (You do not need to remo ve th e pape r from the fr ont tr acto r firs t.) 1. Turn off th e printe r. 2. Open th e printe r’s top cover as shown below . 3. Open th e rear flap at the bac k of the top co ver. 1-62. ep s rear flap D-2-4 -Bn L Peony [...]

4. Relea se the spr ocket lock levers on the rea r tracto r’s right and l eft sp rocket s by p ushing each l ever bac k. c Cauti on: Do not try to pull on or remove the elastic cord from the tractor. 5. Position t he left sprock et so t hat th e spr ocket pins are to the le ft of the ar row mark on the scal e. Lock it in place b y pullin g th e s[...]

6. Now slid e the ri ght spr ocket to appro xima tely ma tch the widt h of your paper . (Do not lock it in plac e yet.) 7. Slide th e two pape r suppo rts so they ar e space d evenl y betwee n the tw o sprocke ts. D-2-6 -A paper sup port s D-2-6 -B L Peony Rev.C A5 size Chapter 3 98/0 1/07 Pas s 4 3-12 Paper Handling[...]

8. Op en both sprock et c overs. 9. Make sure y our pa per has a c lean, str aight edge . Wi th the side of th e pape r you wa nt to prin t on facing down, insert your pa per th rough th e open ing at the rear of the pr inter. Note: You may find it easier to loa d the paper by standing to the side. That way y ou can fe ed the pape r with one ha nd [...]

10. Fit the first five hole s in the paper ove r the spr ocket pins as shown bel ow. Now cl ose the sprocket cove rs. 11. Slide the ri ght spr ocke t to remo ve any s lack in the pape r. Make su re t he pap er i s stra ight and h as no wrink les. Pull the spr ocke t lock leve r forwa rd t o lo ck t he spro cket in place. After you lock the ri ght s[...]

12. Close t he top cover and the re ar flap . Th e pape r is now loaded in the sta ndby po sitio n. 13. Turn on the printe r. The pri nt head move s to the left and the Power an d Paper O ut li ghts co me on. Also , either the fron t or rear tr acto r arrow on the Tractor Se lect indicato r lig hts u p, d ependi ng on whic h trac tor was sele cted [...]

14. Che ck t he Trac tor Selec t indi cato r to see which tr acto r is sele cted: T If the rear trac tor arro w ligh t is red, press the LF/FF Load but ton to load th e pape r. T If the front trac tor ar row ligh t is red, press the Fron t/R ear button t o swi tch to the r ear tracto r. W hen the pri nter swit ches trac tors, it al so loads the pap[...]

Adjusting the Paper Position You can adjust the top-of-form position as well as the printing positi on at any po int on the page by using the TOF and Micro Feed button s. Th e prin ter then r ememb ers the new top-of-form positio n. When you use the optional pull tractor, you can adjust th e paper po sition as descr ibed below . Note: The printing [...]

You can set the top-of-form position from 2.6 mm (0.1 inch) to 33. 9 mm (1.33 inch ) below the top ed ge o f the paper . The factory settin g is 5.8 m m (0.2 i nch). Follow the st eps be low to reset (perma nently chang e) the top-of-form p osition. c Caution: To adjust the top-o f-form position when la bels are loaded in the pr inter, use the for [...]

4. U se the Micro Feed button s to fee d the pa per to the desired top-o f-form position. The red line on the ribbon protec tor s hows yo u wher e the bot tom e dge of yo ur first line of text wi ll print . This positio n is based on the first pri ntable line o f text . If you r soft ware i nserts a top m argin of fi ve line s, yo ur text will actu[...]

Adjusting the print ing positi on You may need to adjus t the prin ting positi on in th e middle of a page, or to adjust the top-of-form position when using labels. When y ou mo ve th e prin ting posi tion, you tempo rari ly c hange the top-of-form positi on by the same amount. For example, if you adjust the pri nting in t he mi ddle of t he pag e [...]

Tearin g Off the Printed Pa ges After yo u finis h print ing, you can use the te ar- off fea ture to advan ce c onti nuou s pap er o n th e pus h tr acto r to the tea r-off edge of th e printe r. You can then easily tea r off printe d sheets. When you r esu me prin ting , th e pr inte r au tomatic ally feed s paper back to the lo ading po sitio n. [...]

Follow these steps to select tear-off m ode: 1. Make sur e the printe r is turned off. 2. Tur n DIP swit ch 3- 1 on . 3. Tur n the prin ter on. When tear- off mode is on and you print on contin uous pa per on the push t ractor , the printe r ad vances t he fina l pr inted page to the t ear-off p osition . Then you can tear off all printe d page s. [...]

Using the Tear Off button Wheth er or not th e printe r is in tear-off mo de, you ca n use the Tear Off button to advanc e cont inuous pa per to the tea r-off positi on by follow ing th e ste ps below . 1. Make sure printing has finished. Then press the Tear Off button . The pr inter ad vances the paper to the tear -off edge and th e Tear Off light[...]

3. Press the Tear O ff button to en ter the te ar-off mod e. The Tear Off ligh t come s on an d the pr inte r fee ds the pa pe r’s perfora tion to th e printe r’s tear-off ed ge. 4. If the pape r is not alig ned wi th the tear-o ff edge, press the Micro Feed butt ons to fee d the pa per f orwa rd or backwa rd in 1/216- inch inc remen ts. (You c[...]

5. Tear off th e page usin g the te ar-of f edge on the pr inte r’s top co ver. 6. Press the Tear Off button to f eed th e pape r back to the top-of-form posit ion. You are now ready to print your next docu ment. c Caution: Alwa ys te ar off th e pr inted docum ent b efore y ou fe ed th e pa per back to the top-of-form position. Never feed paper [...]

Switching Between Front and Rear Tractors You can easily switch betwee n pape r load ed on th e front tracto r and pa per load ed on th e rear tra ctor . The instr uction s belo w ex plain how to switc h fro m th e fr ont trac tor to the re ar tracto r, but you ca n follow th e same step s to switch from the rea r tracto r to the fron t tracto r. ([...]

2. If you ha ve a pr inte d docu men t or exce ss paper st ill in the printe r, use the te ar-of f fea ture descri bed in th e prev ious sect ion to tear off the docu ment or exce ss pap er. c Caution: Alwa ys te ar off th e pr inted docum ent a nd a ny exc ess paper befor e switchin g tractors . Nev er fe ed more than one pa ge bac kward th rough [...]

Changi ng th e Pa per This secti on descri bes how to chang e paper on the front trac tor, but you ca n follow th e same steps whe n you chan ge the paper on the rear trac tor. Before yo u start, mak e sure the pr inter is turn ed on and th e fron t trac tor is se lec ted. (I f you ar e chan ging the paper on the rea r trac tor, the rea r trac to r[...]

2. Press the Front/Rear button to switc h to the rea r tr acto r. T he front-l oaded paper au tomatic ally feeds back to the sta ndby posit ion . 3. Open th e pr inte r’s fro nt c over. (T o ch ange the rea r-loa ded pape r, ope n th e prin ter’s top co ver and the rear f lap. ) 2-21-22 D-2- 23-A D-2- 23Bn 3 R Peony Rev.C A5 size Chapter 3 98/0[...]

4. Open t he s prock et c ove rs an d re move the paper from the tracto r. 5. Load th e ne w pap er as descri bed i n ste ps 2 th roug h 11 on page 3-4 (or for rear-lo aded paper, steps 4 th rough 14 begi nnin g on pag e 3-11) . sprocket cover D-2-2 3-C L Peony Rev.C A5 size Chapter 3 98/0 1/07 Pas s 4 3-30 Paper Handling[...]

Print ing o n Mul ti -P art F orms a nd La bel s Your prin ter can print on b oth sing le-s heet and c onti nuou s mult i-part for ms, as well as on label s. You can pr int on vari ous typ es of paper, inclu ding multi-p art forms an d label s. Your pr inter ca n also ha ndle a vari ety of pape r thic knes ses , fro m thin pa per to sev en sh eets [...]

Using multi -part forms You can use multi-part (carbonless) forms with up to six sheets, includ ing th e orig inal, on the rear tr actor. On the front tract or, you ca n use forms with u p to seven shee ts. You loa d co ntinuo us mul ti-pa rt fo rms the same w ay y ou loa d any othe r type of continu ous pap er. Befor e load ing mul ti-pa rt forms,[...]

Using labels When select ing la bel s for prin ting , alwa ys choo se th e type mounted on contin uous pa per wi th sprock et holes for use with a tr acto r. Load la bels in the front tractor only, followin g the in struc tion s for load ing co ntin uous pa per. See “Loadin g Paper Onto the Fr ont Tr actor” on page 3- 4. c Caution: Ne ver us e [...]

L Peony Rev.C A5 size Chapter 3 98/0 1/07 Pas s 4 3-34 Paper Handling[...]

Chap ter 4 Using the Printer Proof Sign-off: Yano _______ Tavet ian _______ Con tro l P anel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Li ght s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -2 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Other co ntrol pa nel fea tures . . . . . . . .[...]

Control Panel The cont rol pane l consi sts of indica tor li ghts and but tons, and gives you ac cess to several po werful fea tures. Lights Powe r On when th e power swi tch is on and power is s uppli ed t o th e prin ter. Pape r Out On when the pr inter is ou t of paper. Comes on whe n there is no pap er position ed be hind the print head, even i[...]

Font The font se lectio n sta tus i s disp layed by two font lig hts o n th e co ntro l pane l: o o Supe r Draft o n Draft n o Roman n n Sans serif n =On, o =Off Pitch The pitch sele ction statu s is d isplaye d by thre e pitc h lights on the contr ol panel : o o n 10 cpi o n o 12 cpi o n n 15 cpi n o o 17 cpi n o n 20 cpi n n o PS (P ropo rtio nal[...]

Tractor Se lect Front On wh en the front tr acto r is sel ecte d. The light is gr een wh en paper is loade d (even if the pape r is in the standby positi on), and red w hen th e trac tor is out of pa per. Tractor Se lect Rear On whe n th e rear tra ctor is select ed. The light is gr een wh en paper is loade d (even if the pape r is in the standby p[...]

Pitch Selects the char acters per in ch for prin ting . Press th e but ton un til the li ght ap pear s next to t he d esire d pi tch. (Yo ur so ftwar e settin g overrid es this setting .) Copy Lets yo u prin t the do cumen t dark er. Th is button is a vaila ble in SuperD raft and Dr aft mode onl y and is disabl ed if you use the statu s moni tor ut[...]

This butto n can also be use d to run the printe r’s NLQ sel f test. Se e “Print ing a Se lf Test” in Ch apter 8. c Caution: Neve r pres s the Tear Off button when labels are load ed in the pr inter. Use the LF/FF Loa d button to feed the printe d labels to a point wh ere they can be torn off. LF/FF Lo ad LF advanc es pape r one line at a tim[...]

To reset the tear-off positi on, press the Tear Off button to ente r tear-off m ode and fee d the pape r to the tea r-o ff posi tion . Then use the Mic ro Feed buttons to move the pa per to the des ire d posit ion. See “Adjust ing th e tear -off po sition ” in Chapte r 3. To a djust the prin ting p ositi on, press either Micr o Feed butt on t o[...]

Other control panel features Self test By hold ing do wn the LF/FF Lo ad or Tear Off but ton whil e you tu rn on the printe r, you can st art th e pr inter’s self test. The self te st prints th e charac ters in the prin ter’s ROM (Read Onl y Memory). See “Pri ntin g a Self Test” in C h ap t e r 8 . Hex du mp By ho ldin g do wn b oth the LF/[...]

Using DIP Switches Your pri nter has five sets of DIP switches wh ich cont rol prin ter functi ons such as p age le ngth a nd p rintin g speed . DIP sw itch settin gs are shown in the DIP switch tables start ing on pag e 4-11. Desc riptio ns of al l the DI P swit ch func tion s are pro vided beginn ing on pag e 4-16. Beca use the factor y (def ault[...]

4. Open the DIP swit ch cove r. 5. Use a pointe d instrume nt, suc h as the ti p of a ballpoin t pen, to turn th e switc h either on or off. A DIP swi tch is on when it is up, an d off wh en it is do wn. Note: Alw ays mak e su re t hat the prin ter is t urn ed off befo re c han gin g any DIP switc hes. 6. Clos e the DIP swit ch cover an d replac e [...]

DIP switch tables The fo llowin g ta bles list the se ttings for e ach DIP sw itch . For more info rma tion abou t ea ch feat ure, see the expl anati ons follow ing the ta bles. DIP swit ch 1 Switch De script ion ON OFF 1-1 Ch aracter table Se e Tables A-1 an d Table A-2 1-2 1-3 1-4 1-5 1-6 1-7 Sk ip over perforation Active Inactive 1-8 Prin t d ir[...]

DIP switch 3 Swit ch Descr iptio n ON OFF 3-1 Auto tear off Activ e In act ive 3-2 Zero sl ash Acti ve Inact ive 3-3 Auto line feed Acti ve I nact ive 3-4 Buzz er ( be ep ) In act ive Active 3-5 Auto C R (I BM 2381 Pl us) Act ive Ina cti ve 3-6 IBM ch aracter table Table 1 Tab le 2 3-7 A uto cu t mode Active I nactive 3-8 Soft wa re IBM 2381 Plu s [...]

Table A-1 Character tabl e (standard model) Character table SW 1-1 SW 1-2 SW 1-3 S W 1-4 SW 1-5 SW 1-6 PC 437 ( US, Sta nda rd Eu rope ) OFF OFF OFF OFF OFF O FF PC850 (Multilingual) OFF OFF OFF OFF OFF O N PC860 (Por tuguese) OFF OFF OFF OFF ON OFF PC 861 ( Ice land ic ) OFF OF F OF F OFF O N ON PC 863 (Canad ian-Fren ch) OFF OFF OFF ON OFF OFF PC[...]

Character table SW 1-1 SW 1-2 SW 1-3 SW 1-4 SW 1-5 S W 1-6 PC855 (Cyrillic) OFF OFF OFF ON OFF ON PC857 ( Turkish) OFF OFF OFF ON ON OFF PC866 ( Russian) OFF OFF OFF ON ON ON PC869 (Gre ek) OFF OFF ON OFF OFF OFF MAZOWIA (Poland) OFF OFF ON OFF OFF ON Code MJK (CSFR ) O FF O FF ON OFF ON OFF ISO 8859 -7 (Latin /Greek) OFF OF F ON O FF ON O N ISO La[...]

Table B Page length fo r front tract or Page length for fro nt tr act or S W 2-1 SW 2-2 SW 2-3 SW 2- 4 11 inches OFF OFF OFF OFF 4 inches OFF OFF ON ON 5.5 inches OFF ON OFF OFF 6 inches OFF O N OFF ON 7 i n c h e s O F F O NO NO F F 8 i n c h e s O F F O NO NO N 8.5 inches ON OFF OFF OFF 70/6 inch es ON OFF OFF ON 12 inches ON OFF ON OFF 14 inches[...]

Table D I/F (interface) mode I/F mode SW 4- 3 SW 4-4 Auto OFF OFF Parallel I/F OFF ON Serial I/F ON OFF Opti on al I /F ON ON Tabl e E Seri al p arity Serial parity SW 4-5 SW 4-6 None OFF OFF Odd OF F ON Even ON OFF Ignore O N ON Table F Serial baud rate Serial baud rate SW 4-7 SW 4-8 19200 OF F OFF 0 96 00 OFF ON 0 4800 O N OFF 0 24 00 ON ON DIP s[...]

Skip over p erforatio n Whe n DIP switch 1-7 is on, the pr inter in serts a on e-inch marg in betw een the la st li ne pr inted on one pa ge a nd the first line printed on the next page. By adjust ing your top-of-form posi tion, yo u can ge t half the m argin at the bottom of one page and half at the to p of the next pa ge. Se e “Adjust ing th e [...]

Auto li ne feed When DIP sw itch 3- 3 is on, th e prin ter ad ds a line feed (L F) comm and to ever y ca rriage ret urn (CR) code sent by the appl icatio n progra m softwar e. When the swi tch is off, line feeds o ccur onl y when the so ftware sends li ne feed commands to th e prin ter. Sinc e mos t compu ters and ap plic ation pr ogra ms autom ati[...]

Auto cut mode This fun ctio n is ava ilabl e only wh en th e option al per forat ion cutter (C8150 7 @ ) is install ed in the pr inter. W hen DIP switch 3 -7 i s on , the perforation cutter cuts each page at the p e rf o ra t i on autom ati cally. Note the fol lowi ng when yo u turn on th is function: T Mak e sure the pape r is at lea st 4 inches l[...]

Auto I/F (interfa ce) wait time Whe n the pr inte r is in the aut o inte rfa ce mode and it rece ive s no da ta from th e curr ently s elec ted in terfa ce fo r the amo unt of time specifie d wi th thi s settin g, it dete rmines which i nterf ace is rec eiv ing da ta and switch es to that in terf ace . You can specify 10 seconds when DIP switch 4-2[...]

Serial baud rate If your com put er is set up for serial co mmun icat ion you m ay need t o ch ange the se rial b it (also know n as bau d) ra te se ttin g. The seri al baud rate is the ra te at whic h the pr inter re ceives data from the co mpute r. DIP swit ches 4-7 and 4-8 cont rol th e serial bau d rate. Ta ble F (page 4-16) lists th e DIP sw i[...]

Using the Paper Memory Feature When y ou use mul ti-pa rt form s that over lap, o r form s with label s on them, you can use th e paper m emory feature for better pr int qua lity. It au tomat ically adjusts the ga p between the prin t head and the plate n based upon the type of pape r set in memo ry. This sho uld gi ve you bette r print q uality . [...]

Saving paper memory settings This pr ocedur e requi res settin g seve ral DI P swit ches . See the sectio n on c hangin g DIP sw itch se ttings earl ier in this chapt er. 1. Make sure the prin ter is turn ed off. 2. Turn DIP swit ch 5-4 of f to save your sett ings for memory a or on for memory b. 3. Selec t the pa ge len gth by tu rnin g DIP switch[...]

4. Sele ct the paper type by turn ing DI P swit ches 5- 1, 5-2 , an d 5-3 on or off as shown belo w. Overlapping multi -part forms SW 5-1 Inactive OFF Active ON Mult i-p art form s with lab els SW 5-2 Inactive OFF Active ON Skip over binding SW 5-3 Inactive OFF Active ON 5. For o verla ppin g mul ti- part fo rms withou t la bels, hold dow n the Pap[...]

6. Open the pr inte r cov er. w Warning: If you ha ve been us ing the pr inter, th e print head may be hot; let it cool for a few minutes before tou ching it. 7. Move th e poin ter (the poin t wher e the two li nes int ersect) to the labe l’s upper le ft corn er. Us e the Micro Feed buttons to move th e paper up or down and manu ally move the pr [...]

10. Press the TOF button . Th e pr inte r b eeps twic e. I f the sett ings ar e not co rrec t, the print er beep s five ti mes. If th is happ ens, repe at step 9. 11. Close th e printe r cover. The pr inter save s the continu ous forms wit h labels info rmati on in the memo ry area yo u sele cted. The memo ry numbe r you selec ted is displayed and [...]

Chap ter 5 Using EPSON Status Monitor 2 Proof Sign-off: Yano _______ Tavet ian _______ Installi ng EPSON S tatus M onitor 2 . . . . . . . . . . . . . . . . 5-2 Accessing EPSON Sta tus Monitor 2 . . . . . . . . . . . . . . . . 5-3 Checki ng the Printer Status . . . . . . . . . . . . . . . . . . . . 5-4 Usi ng the E PSON S tatu s M on itor 2 win do w[...]

EPSON St atus Mo nitor 2 is a ut ilit y that come s with your printe r for use wi th Win dows 95 . It allo ws you to mo nitor yo ur printe r’s sta tus, aler ts you when pri nter e rror s occur , and prov ides trou bles hootin g instr ucti ons whe n ne eded. Th is chapte r tell s you how t o use t he Statu s Mon itor t o get prin ter status in for[...]

4. T ype A:SETUP (if you inserted the disk in a drive ot her than “A”, sub stitu te t he a ppropr iate let ter) and clic k OK . 5. Follow the o n-screen i nstruct ions, t hen cl ick FINISH to comp lete t he i nstalla tion pro cedure . After you insta ll E PSON S tatu s Mon itor 2 a nd res tart your comp uter , the Stat us Moni tor star ts aut [...]

Checking the Printer Status This secti on descri bes how to use th e Stat us Monito r menus to get general and detai led printe r statu s info rmati on. Fo r detai led prin te r statu s informa tion , see “Using th e Prin ter Stat us wind ow” on page 5-8 . Using the EPSON Status Monit or 2 window The main feat ures of th e EPSO N Stat us Monito[...]

The Statu s column displa ys brief messages descri bing th e current status of th e prin ter. The Job Count column displa ys the numbe r of jobs waitin g to pri nt. Note: You can rearrange the order of the printers in the list by clicking the Printer Name, Status, or Job Count. Printer menu Thi s menu all ows y ou to get detail ed i nform ation on [...]

View menu This menu le ts you co ntrol th e appe arance and conte nt of the EPSO N Stat us Moni tor 2 wind ow a nd t he In stall ed Pri nters list . Click the View menu on the EP SON Stat us Monito r 2 wind ow to access the fol lowing settings: T Tool bar/St atus bar Displays or hides the to olbar and status bar in the E PSON St atus Monito r 2 win[...]

Click the Sett ings men u on the EPSON Sta tus M onit or 2 windo w to access the follo wing settings: T Monito ring Prefer ence s Opens th e Moni tori ng Pre feren ces dialog box, wh ere you ca n adjust the monitor ing in terv al and ch ange the backgr ound mo nitori ng se ttings for t he select ed pri nter . For more in format ion, see “T urni n[...]

Help m enu Choo se He lp Top ics from this m enu to get online he lp abou t the Epso n Status Mo nito r 2. Click About to view the St atus Monit or’s versi on numbe r and co pyri ght in form ation. Toolbar Many of th e commands ava ilable on the EPSON Statu s Monitor 2 window menus ca n be accessed directly by clic king the but tons on thi s tool[...]

You ca n als o acces s the Pri nter Statu s windo w by cl icking the Deta ils bu tton in a Stat us Aler t d ialo g box. (For inf orma tion on th e Stat us Ale rt d ialo g box, see “Set ti ng Mon itor ing Pre feren ces” on pag e 5-10. ) To op en the menu s in the Prin ter St atus wind ow, cl ick th e tabs along th e top. Curr ent Status menu Thi[...]

Setting Monitoring Preferences In the Moni tori ng Pre feren ce d ialo g box, y ou can adju st the monito ring i nterval and t urn on back ground mo nito ring. The mon itorin g interva l is the pe riod of time betw een statu s inform ation up dates for th e selecte d printe r. You can set the interva l wh en you tur n on ba ckgr ound pri nting, as [...]

2. Selec t the prin te r you want to monit or from th e Inst alle d Prin ters li st, and the n clic k Monitoring Prefere nces on the Se ttin gs menu. You see this dia log box : 3. Use th e slide r to adjust th e monitor ing inte rval, if necessa ry. Note: Setting a s hort monitor ing i nter val ma y caus e so me ap plic ations to run more slo wly. [...]

Using the background monitori ng icon A prin ter-sh aped ba ckgr ound mo nitori ng i con appear s on the taskbar wh enever th e Stat us Moni tor is acti ve. Double-c lickin g the backg round m onitor ing icon opens the EPSO N Status Moni tor 2 wi ndow . Right -clic king this i con opens a po p-up men u where yo u can ch oose wh ethe r the Stat us A[...]

Accessing the paper memory util ity To a ccess th is ut ility, fo llow the se ste ps: 1. If pape r is load ed in the pr inte r, first ej ect th e pape r. The n select th e memory numbe r 0 by pressing the Paper Sele ct button . Ma ke sure t he p rinter is r eady t o prin t. If th e printe r is in pause sta tus, pr ess th e Pause bu tton to re turn [...]

2. Click the memory n umbe r to r egist er a n ew p aper o r an existi ng o ne, an d then cli ck Modi fy . You se e the Modi fy Paper Me mory di alog box : 3. Ent er (or chec k) the appr opri ate in format ion for each setti ng below: T Paper Name You can type a uni que n ame fo r th e paper. If the printer ha s informa tion on memo ry a o r memory[...]

T Load ing Stat us Selec t whethe r the pape r is load ed or not. T Print Intensi ty S elect th e print in tensi ty. Sele ct Dark if you w ant to pr int a t a dark er int ensit y. 4. When you are finished register ing or maki ng cha nges, click OK . The Pa per Me mor y List wi ndow app ears ag ain. If yo u want to print th ese settin gs, click Prin[...]

L Peony Rev.C A5 size Chapter 5 98/01/ 07 pass 4 5-16 Using EPSON St atus Monitor 2[...]

Chap ter 6 Using Printer Options Proof Sign-off: Yano _______ Tavet ian _______ Using the Pu ll Tract or . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Instal ling the pull tracto r . . . . . . . . . . . . . . . . . . . . 6-2 Usi ng t he p ull tracto r wi th t he fr ont tracto r . . . . . . . . . 6-5 Using th e pull trac tor with th e rear tra[...]

Using the Pull Tractor The opti onal pull tr actor (#8 309) pr ovide s optim um conti nuou s paper hand ling . The pull tra ctor i s e speci ally u sefu l with contin uous mul ti-pa rt forms an d labels . For best result s, use the pull trac to r with eithe r the pr inte r’s f ront or rear buil t-in tracto r, as descri bed i n this section . Note[...]

2. Us e a cross-hea d screwd river to remove th e two scr ews securi ng t he pap er separa tor to the pri nter. Th en lift the paper separator off th e printer. 3. Usin g the two scr ews you just re moved from the print er’s origin al p aper se para tor, ins tall the pape r separ ator tha t comes with the pull trac tor. D-4- 3-A D-4- 3-B 6 R Peon[...]

4. Close the pap er s epa rato r co ver and ope n th e pr inte r’s top cover . 5. Holdi ng the pul l tracto r with its gears to the le ft, fit the tracto r’s front notches over th e mounting sha ft of the printe r. D-4-4 -A D-4-4 -B L Peony Rev.C A5 size Chapter 6 98/0 1/07 Pas s 4 6-4 U sing Printer Options[...]

6. Open the p aper ba il u sing th e ta b on it s rig ht side . Then tilt the pul l tracto r back unti l its rear la tches cli ck into pl ace over th e prin ter’ s rear mounti ng pins . 7. Gent ly clo se the pape r bail (do not apply ex cess pressur e), and th en clo se the pr inte r’s to p cove r. Using the pull tract or with the front t racto[...]

2. Make sure paper is l oade d on the fron t tr acto r to the top-of-form p osition. If p aper is a lready loaded on the tracto r but it is in t he standby posi tion, press the Front/Rear or LF /FF L oad butt on (dep ending o n wh ich tractor is selected) to load the paper to the top-of-form posi tion. ( If no pa per is loaded on the fro nt tra cto[...]

6. Sl ide th e two pape r sup port s so the y are sp aced ev enly betwee n the two spr ockets. 7. Fit th e spr ocket hole s of t he pap er o ver t he spro cket pins . If there is sla ck in the pa per or if the holes in the paper do not alig n prop erly wit h the spr ocke t pins, pull the pa per sligh tly an d use the pul l trac tor kn ob to adj us [...]

8. Close the spr ocke t cover s. 9. Adjus t the tw o sproc ke ts unti l the pa per is strai ght an d smooth , and then loc k the sproc kets into place. c Caut ion: Be sure the spro ckets are not too far apar t. Your pape r could jam if th ey pull the paper to o tightly or tear the edge s of the p aper ho les. To rem ove an y exce ss tens ion in you[...]

Using the pull tract or with the rear tract or If you are usi ng labels or multi-p art for ms with more th an six sheets (in clud ing the or igin al), do not use the re ar tract or; use the front tr actor as de scribed in the pre vious secti on. You c an sw itch b etw een the front a nd r ear tr acto rs at any time when you ar e using the pull tr a[...]

3. Tilt th e tracto r forwa rd so that it s pins rest on the m etal frame of th e printe r. 4. Load pa per onto the rear tr actor as de scribed beg inning on page 3-10 , steps 3 thro ugh 11 . 5. Open th e paper bai l by lifti ng the tab on its ri ght side. The n tilt the pull tr acto r back un til th e rear latch es clic k into pl ace ov er th e pr[...]

Removing the pull tract or To remove t he p ull tracto r yo u’ll need a cro ss-head screwd river and t he pap er sepa rator that was or iginal ly i nstalle d on the prin ter. 1. Remo ve any pape r install ed on the tr actor and tu rn off the prin ter. 2. Op en the top c over and lo cate t he l evers th at l ock th e pu ll tracto r in pla ce on th[...]

4. Use a cross-head scr ewdrive r to remove th e two scr ews securin g the pape r separat or to the pr inter. The n remove the pape r separ ator tha t came wi th the pul l trac tor. 5. Usi ng the t wo scre ws, rei nstall the origin al p aper se parato r and cl ose t he pap er separa tor cover. Using the Perforation Cutter The op tion al p erf orati[...]

The foll owing il lustrat ion shows a wa y to positi on your pa per with t he r ear trac tor load ed. Installing the perforat ion cutter The step s below show yo u how to inst all the pe rforati on cutte r. You will need a cro ss-head sc rewdri ver. Note: If you plan to use the perfo ration cutter with the built-in rear tractor, you need to load p [...]

2. Use a cross-head scr ewdrive r to remove th e two scr ews securin g the pape r separat or to the pr inter. The n lift off the pape r se para tor. S tore the pap er se para to r an d scr ews for later use . 3. Close the paper se para tor co ver and ope n th e re ar fl ap an d remove it by li fting up to pull th e pegs on the rea r flap out of the[...]

5. Ho ld t he per for atio n cutt er by its hand le w ith the co nnec tor faci ng to the ri ght. The n lower th e perfora tion cutter in to the spa ce at th e bac k of the pr inte r, fitt ing th e pins on the sides o f the per forat ion cu tter int o the notc hes in the printe r. 6. Afte r the perfo ration cutter is in place, push bac k the perfo r[...]

Attaching the perforat ed paper output att achment and output tray The perfor ation cu tter comes wit h the pe rfo rate d paper ou tput attach ment and th e perfora ted pape r outp ut tray for stacking printed sheets. You can stack up to 200 sheets of pa per or 100 m ulti -part form s on the o utpu t tr ay. Note: T Stacke d page s may be turne d ov[...]

2. Close th e pape r separ ator c over an d pos ition th e outp ut tray on the ou tput attac hment to acco mmod ate th e page length of pape r you use : You are no w read y to use the pe rforati on cutte r as describe d in the next sec tion. c Cauti on: T You canno t ope n the to p co ver while the perfo rated paper output attachment a nd the outpu[...]

Paper handling This secti on descri bes how to use th e perfora tion cut ter with contin uous paper. Befo re pri ntin g wi th the perf orat ion cu tter inst alle d, se t th e pa ge l engt h to matc h yo ur pap er u sing your software or th e prin ter’s DIP switch s (as descri bed i n Chapte r 4). Note: T EPSON rec ommends that th e pe rfora tion [...]

T Tur n on aut o cut mod e with DIP swi tch 3-7 ; the perf orat ion cutt er wil l cut of f each page au tom atic all y. See “U si ng DIP Swit ches” in Chap ter 4. T Select the pr inter’s te ar-off mode as fol lows: 1. Make sure printing has finished. Open the paper separato r cover. You see the perforation cutter’s tear-off edge. 2. Press t[...]

Removing the perforation cut ter To remo ve th e perfo rati on cutte r, foll ow t he step s below. A fter you re move t he p erfor ation cutt er, store i t in its origin al bo x and pack ing mat erials. 1. Cut off any pri nted document in the prin ter as descr ibed in the pr evi ous s ectio n. 2. Turn off th e printe r and open the paper sepa rator[...]

3. Unp lug th e paper cu tter ’s connector from the pr inte r. 4. Op en the top c over. G rasp the hand le on the perfora tion cutter and l ift the per forat ion cu tter up an d out of th e prin ter. 6-14-Bn 6-5 6 R Peony Rev.C A5 size Chapter 6 98/0 1/07 Pas s 4 Using Printer O ptions 6-21[...]

5. Clos e the top co ver and open the pa per sep arator cover. 6. Reatta ch the paper separa tor usi ng t he two screws that y ou removed before. 5-30- B D-4-1 3-C L Peony Rev.C A5 size Chapter 6 98/0 1/07 Pas s 4 6-22 Using Printer Options[...]

7. Close the p aper se parato r co ver. 8. To reatta ch the rear f lap, fi t the pe gs on the rear f lap into the notc hes at th e bac k of the pr inte r. The n clos e the rear fla p. 5-31-B 5-22-29n 6 R Peony Rev.C A5 size Chapter 6 98/0 1/07 Pas s 4 Using Printer O ptions 6-23[...]

Using the Paper Cutter The op tion al p aper cut ter (C815 00 @ ) makes u sing cont inuo us paper ea sier by cutt ing off your print ed docume nts for you. When you use the pa per cutt er, be sur e to set the pa ge lengt h to ma tch yo ur p aper usin g eith er y our software or the pr inte r’s DIP swit chs (d escribed in Chapte r 4). c Caut ion: [...]

1. Turn off the pr inte r and op en the paper sepa rato r cov er. 2. Us e a cross-hea d screwd river to remove th e two scr ews securi ng t he pap er separa tor to the pri nter. Th en lift off t he paper separato r. Sto re the p aper sepa rator and screws fo r late r use. 3. Cl ose the paper sepa rator cover and open the top co ver. 5-20-A 5-20-B 6[...]

4. Hol d the pape r cutt er by its hand le wit h the conn ecto r faci ng to the ri ght. The n lowe r it into th e spa ce at th e back of the prin ter, fi tting the pi ns on the si des of t he pap er cutter into th e notche s in the prin ter. 5. After th e pape r cutt er is in pl ace, tilt the pa per cu tter handle forwa rd. Th en clo se the to p co[...]

6. Open the rear flap an d remove it by li fting up to pull th e pegs on the rear fla p out of th e notc hes at the bac k of the pr inte r. Then plug the pape r cu tter’ s con ne ctor se cure ly i nto the conn ecto r inside the prin te r. 7. To repl ace the rear flap , fit the peg s on the rear flap int o th e notc hes at th e bac k of the pr int[...]

Paper handling This secti on descri bes how to use the pa per cutt er wit h conti nuou s paper . When you use the pape r cutt er, you ne ed to set the page l engt h to m atch your pap er. Cutting of f a prin ted docu ment To cu t off a prin te d docu ment, foll ow the step s belo w: 1. Be sure tha t the pr inte r is turn ed on an d th at it is in p[...]

3. If you lo aded new paper onto the cu rren t trac tor sin ce the last time yo u cut off a documen t, you may need to ad just the cu ttin g posit ion. Open the pa per se parat or co ver an d use th e Micro Feed buttons to adjust th e cutt ing posit ion with th e cutt ing line . Then clo se the pa per sep arator cover. Note: You can set the cutting[...]

5. Press the Paus e button to turn off t he P ause mode s o th e printe r is ready to print . Note: The next printing pos ition after th e paper is cut depends on the cutting position and th e top-of-form position, as described below. T When the cutting position is above the top-of-form posi tion, the printer sta rts printing a t the top-of-form po[...]

Switching trac tors To sw itch trac tors w he n th e pa per cutter is i nst alled, fo llow the steps below: 1. Make sure the prin ter is turn ed on. If you ar e in the middle of printi ng a doc ument , wa it fo r th e pr inte r to fini sh pr inti ng before you swi tch trac tors. 2. If no pape r is load ed in the tr acto r you want to use, load pape[...]

Removing the paper cutter To remo ve the pape r cutt er, follo w the ste ps below. A fter yo u remo ve the pape r cutt er, store it in i ts or igin al bo x and pac king mate rials . 1. Cut off any pri nted document in the prin ter as descr ibed in the pr evi ous s ectio n. 2. Turn off th e printe r. 3. Open the rear fl ap a nd r emove it by lift in[...]

4. To replac e the re ar flap , fit the pegs on the fla p into the notc hes at th e bac k of the pr inte r. The n clos e the flap. 5. Op en the top c over. G rasp the hand le on the paper cutt er and li ft the pa per cu tter up and ou t of th e prin ter. 5-22-29n 5-30-A 6 R Peony Rev.C A5 size Chapter 6 98/0 1/07 Pas s 4 Using Printer O ptions 6-33[...]

6. Clos e the top co ver and open the pa per sep arator cover. 7. Reatta ch the paper separa tor usi ng t he two screws that y ou removed ea rlier. 8. Close the paper se para tor co ver . 5-30- B D-4-1 3-C 5-31- B L Peony Rev.C A5 size Chapter 6 98/0 1/07 Pas s 4 6-34 Using Printer Options[...]

Interf ace Ca rds You can use optional in terface cards to supplement yo ur prin ter’s b uilt- in se rial an d par alle l in terf ace s. The EPSO N inte rfac e c ards bel ow a re c ompat ibl e wi th y our pr inte r. (Not al l of these inter faces ar e ava ilabl e worldw ide. ) Number Name C823 05 @ /C82306 @ Serial interface C823 07 @ /C82308 @ 3[...]

Installing an i nterface card Follow the st eps be low to instal l an optio nal interface card. Note: If you install an optional interfac e card, mak e sure your pr inter’s DIP switches are set for automatic or optional interfa ce. See Chapter 4 for infor mation on setting DIP switche s. 1. Turn o ff b oth your prin ter and your comp uter. Then r[...]

5. Use a sc rewd riv er to remov e t he sc re ws se curin g th e inte rfac e sh ie ld pla te; re move the sh ield pla te. 6. Slid e the in terface car d into the gro oves in the inte rface slot . Push i t in firml y to make sure i t co nnec ts to t he p rinter ’s inte rnal sock et. 7. Secur e the in terfa ce with the s crew s provid ed with the c[...]

9. Plug th e othe r end of the ca ble into yo ur comp uter . 10. Close th e interfa ce cover. 11. Plu g the powe r co rd i nto your pri nter a nd a n el ectr ical out let. Using a serial int erface card (C82305 @ or C82306 @ ) To use a se rial inter face card (C82 305 @ or C823 06 @ ), se e the section s below to set the corr ect bau d rate, ha nds[...]

Chap ter 7 Maintenance and Tran spor tation Proof Sign-off: Yano _______ Tavet ian _______ Replacing t he Ribbon Cartridge . . . . . . . . . . . . . . . . . . 7-2 Cleaning the P rinter . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Tra nsp or ting th e P rint er . . . . . . . . . . . . . . . . . . . . . . 7-5 Maintenance 7 R Peony Rev.C A5 s[...]

Replacing the Ribbon Cartridg e When prin ting becomes to o faint, yo u need to replac e the ribbon. Use the #87 66 EPS ON repla cemen t cart ridge only. w Warning: If the printer has bee n used r ecently, the print head may be hot. Let it cool befo re a ttempting to r eplace the ribbon. To rep lace t he ribbo n cart ridg e, foll ow t hese ste ps: [...]

4. Pull up on the sid e of the ri bbon cartridge as shown b elow to rele ase it from the pr inte r’s mou ntin g pins. Remove the cartr idge by l iftin g it up and aw ay fr om yo u. c Caution: Make sure you don’t pull on the flat gold cable beneath th e ribbon cartridg e. To inst all th e new ca rtridg e, se e “In stall ing th e Ribbo n Cartri[...]

Cleaning the Printer To ke ep your pr inte r operat ing at its best , you sho uld cl ean it tho roughl y seve ral ti mes a ye ar. Foll ow the se ste ps: 1. Tur n off the prin ter and cl ose all of its cover s. Then remove any pa per as well as t he pap er gui de. If y ou have instal led the op tion al p ull trac tor, per forat ion cutt er, or pap e[...]

Tran sportin g the Prin ter If you need to tran sport your prin ter some distan ce, care fully repac k it u sing the or igin al box a nd p acking materi als a s des crib e d bel ow . w Warning: Eve n whe n you n eed to carry the pri nte r only a sh ort dista nce, do not carr y it by yourse lf. The printe r should alwa ys be carried by two p eople h[...]

L Peony Rev.C A5 size Chapter 7 98/0 1/07 Pas s 3 7-6 M aintenance and Transport ation[...]

Chap ter 8 Troubleshooting Proof Sign-off: Yano _______ Tavet ian _______ _______ Usi ng the Err or Indi cato rs . . . . . . . . . . . . . . . . . . . . . 8- 3 Printi ng a S elf Test . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 Using the He x Dump Mode . . . . . . . . . . . . . . . . . . . . 8-6 Pro ble ms a nd Sol ut ion s . . . . . . . .[...]

This chap ter descr ibes what you ca n do if you are having problem s printi ng. It is di vided into these sect ions: T Using th e Error Ind icat ors. This sec tion desc ribes how to use th e contro l pane l lights as er ror in dicato rs so you ca n diagno se an d fix pr inte r prob lems . T Printi ng a Self Test. This secti on expl ains how to run[...]

Using the Error Indicators You can id enti fy many co mmon print er prob lems wit h the lig hts o n the cont rol pa nel. If your pri nter st ops w orki ng and the lights ar e on o r f lashi ng, us e t he f ollow ing tab le o f pan el light patt erns to d iagn ose t he p roble m, th en f oll ow the reco mmended co rrecti ve meas ures. State of pane [...]

State of panel light Beep patt ern Problem and solut ion n Pause ••• The p rin ter to p cove r is op en . Close th e cover and pr ess the Pa use but ton. The paper sel ected do es not match t he paper loaded in the printer. Load th e correct pa per or select t he appr opri ate pa per s etti ng. The printer fail s to swi tch to and f eed the p[...]

Printing a Self Test Runnin g the printe r’s sel f test h elps you de termi ne wheth er the prob lem com es from the printe r or t he com puter : T If the self t est resu lts are sati sfactory , the prin ter is work ing prope rly an d the pr oblem is proba bly c aused by your printe r drive r setti ngs, ap plicat ion set ting s, comp uter, or int[...]

3. To end the self test, press the Pause bu tton to sto p pr inting . Tea r off the pa ge if neces sary , and th en turn off th e printe r. c Caut ion: Do not turn off the printer while it is printing. Always pres s the Paus e button to stop printing and then turn off the printer. Using the Hex Dump Mode The prin ter can pr int da ta in hex dum p m[...]

By com par ing th e char acte rs prin ted in the rig ht col umn with the printou t of the he xadecima l codes, yo u can ch eck the co des be ing re ceiv ed by th e prin ter. If char acte rs are pri ntable, they ap pear in th e right co lumn as A SCII chara cters . Nonp rintab le code s, such as contro l code s, are re prese nted by d ots. 4. To t u[...]

Power supply The lights come on briefly but then go off and stay off. Cause What to do The pri nter’ s volt age ra ting may not m atch the voltage o f your electrical outlet. Check the printer and the outlet volt age rati ngs. I f th e vol tag es do not match, unplug the pr inter immediately and contact your dealer. w Warning: Do not reconnect th[...]

Paper handling The printer does not feed continuous paper properly. Cause What to d o The wrong tractor may be selected. Check if the c orrect tractor arrow is lit on th e Tractor Sele ct indicator. If the wrong tractor is selected, be sure paper is loaded to the standby position on the tractor you want to use. Then press the Front/Rear button to s[...]

The paper is not mounted on the sprockets correc tly. Check the pape r on the sprocke ts to be sure the pape r’s sprocke t holes fit corr ectly over the spr ocket pins . The hol es o n the s ides of the pa per may not be a ligned with each other. Reposition the pape r on the spro cket pins. The s pro ckets are not positioned fo r the width of you[...]

Skip over perforation does not work. Cause What to d o You have turned on DIP switch 1-7 when the printer was on. To make any new DIP switch settings effective , turn off the printer and then turn it back on. Your application software may cancel the skip over perforation set by DIP switch 1-7. Check that your application software’s settings are c[...]

When you s witch betwee n front and rea r tractors, the paper jams or the printer does not feed the paper back to the standby position. Cause What to do The printer may have reverse fed too ma ny pa ges. Use the tear off featur e to tear off the printed document or any excess paper so that the printer ne eds to reve rse feed o nly one page . Th en [...]

Operation The Pause light is off but the printer does not print. Cause What to d o The i nterf ace cabl e is not plugged in securely. Confirm that both ends of the cable between the printer and the computer are fastene d secure ly. If the cable is connected co rrectly, run a self test as descri bed on pag e 8-5 . You r int erfac e ca ble does not m[...]

The printer sounds like it is printing, but not hing prints. Cause What to do The ri bbo n cart ridge is no t installed properly. Instal l t he rib bo n cart ridge as describe d in Cha pter 1. The ri bbo n is w orn o ut. Re place the ol d ri bbon cartr idge wi th a new one as descri bed in Cha pter 7. The printer m akes a strange noise , and the pr[...]

Printout Part of the printout is miss ing, or dots are m issing in random positions. Cause What to d o The ribbon cartrid ge is no t installed properly. Re-i nstall the ribbo n car tridge as desc ribe d in Cha pter 1. There is too much slack in the ribbon or the ribbon has come lo ose. Remove any slack from the ribbon or replace the ribbon car trid[...]

Inco rrect ch aract ers ar e pri nted. Cause What to do Your printer and the computer ma y not be communicating correctly. Make sure that you use the corr ect interf ace ca ble and that the communications pro tocol is correct. The wro ng charac ter tabl e is selected in your software. Select the correc t character table using your software or DIP s[...]

All the text is printed on the same line. Cause What to d o No line feed command is sent at the end o f each line of text. Make sure that auto line feed is set to ON using DIP switch 3 -3 so that the printer automatically adds a line -feed code to e ach c arriage re turn. S ee “Using DIP Switchs” in Chapter 4. The text is printed with extra bla[...]

Printing starts lower on the page than you expected, or the bottom of a page is printed at the top of the next page. Cause What to do The top and bottom margin settings in your application software may be in correc t. Adjust them in your application software. Options The perfora tion cutter is installed and t he printer does not feed continuous pap[...]

Paper jam s, does not feed smoothly. Cause What to d o The perforation cutter is not correctly installed. Remove the perforation cutter and then reinstall it, making sure the mounting notches and pins fit togethe r properly. See “Installing the perforation cutter” in Chapter 6. You ma y not be using paper within specifications. Be sure you’re[...]

L Peony Rev.C A5 size Chapter 8 98/0 1/07 DR , pa ss 4 8-20 Troubleshooting[...]

Appendix A Specifications Proof Sign-off: Yano _______ Tavet ian _______ _______ Printe r Specifi cation s . . . . . . . . . . . . . . . . . . . . . . . . A-2 Printi ng . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Pap er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A -4 Mechan ical . . . . . . . . . . . . . . . .[...]

Printer Specifications Printing Printin g method: 9-pi n impac t dot matrix Printing spe ed: Characters per inc h Quality Characters/second/ line 10 cpi High-s pee d draf t 1120 10 cpi Norma l draft 840 10 cpi Nea r letter qu ality 210 12 cp i Draf t 1008 12 cpi Nea r letter qu ality 252 Printing dire ction: Bi dire ctio nal log ic seek ing f or te[...]

Printable column s: Characters per inc h Maximum printed charact ers per colum n 10 cpi 136 12 cpi 163 15 cpi 204 17 cpi 233 20 cpi 272 Buffer: 128 KB o r 0 KB (DIP sw itch sele cta ble) Character fonts: Characters per inch a vaila ble Font Availabl e pitches (cpi) EPSON Super Draft 10 EPSON Draft 10, 12, 15 EPSO N Ro man (N LQ) 10, 12, 15, propo r[...]

Paper Note: Use recycled paper, labels, envelopes, postc ards, overlapping forms, and continuous forms with l abels only under normal temperature and humidity conditi ons a s foll ows: Temperature 15° to 25°C (59° to 77°F) Humidity 20% to 60% RH Continuous paper (including continuous multi-part forms) R The sprocket h ole must be a circle or no[...]

R If you use contin uous paper whose page l ength (A in the ill ustra tion) is unde r 10 1.6 mm (4 inc hes ), make sur e th at the len gth be twee n fold s (B) is over 10 1.6 mm (4 inch es) . For continuous multi-part forms: R The f orm sh eets of cont inu ous mu lti-p art for ms sho uld be secure ly join ed to gether alon g the lef t and ri ght ed[...]

R The b indi ng a re a sh ould be fla t an d sh ould have no crea ses. R The sprocke t holes of all sheets in th e form should be al igned properly. R The bind ing positi on should be outside the pri ntable area. Widt h 101 to 40 6 mm (4 to 16 inche s) Len gth/ page 101 to 43 1 mm (4 to 17 in che s) Number of copie s Front 7 sheets (1 orig inal + 6[...]

Labels R Labe ls sho uld be sec ur ely at tac hed to the ba cki ng she et and the label su rfac e shoul d be flat . R Lab els sho uld no t peel o ff the ir bac kin g sheet u nder the cond ition s belo w. R When us ing la bels who se ba cki ng s heet i s en tirely cov ered, make sure the cuts around the edges of the labels are pe rforated . R When u[...]

Labels Size 63 .5 mm W × 23.8 m m H (2 .5 i nches W × 15/1 6 inch H ) 101 mm W × 23 .8 mm H (4 inches W × 15/1 6 inc h H) 101 mm W × 27 .0 mm H (4 inches W × 17/1 6 inc h H) Total thickness 0 .19 mm (0 .0075 inch) maximum The di ff eren ce in th ickn ess mu st be le ss than 0.12 mm (0 .004 7 in ch). Qualit y Plai n paper o r the sa me qual it[...]

Area measurements Printa ble area Area measurements label printable area on a la bel B C G F G F E E D D A A A 1 3 mm (0 .51 inch) B 2.6 mm (0.1 inch) or more C 4.2 mm (0.165 inch) or more D 12.5 mm (0 .49 inch) or more E 65 mm (2.56 inches) or more F 2 mm (0.08 inch) or mor e G 5 mm (0.2 inch) or more A 1 3 mm (0 .51 inch) B 55 mm (2.1 7 in ches) [...]

Over lapp ing mult i-par t for ms Same as continuous paper (mul ti-part) except for the following: Area measurements Prin tabl e ar ea A B A D E C perforatio n the bo ttom edge of overlapping form the top of overlapping form the bo ttom ed ge of th e glue po int area backing sheet (side view) A1 3 ± 3 mm (0.5 1 ± 0.12 inch ) B 13.3 mm (0 .52 in c[...]

Area measurements Overlapping multi-part forms with labels Same as labe ls exc ept for th e followi ng: The label on y our form sh ould be placed within the sh aded a rea above, but no t on the v erti cal or hori zon tal pe rfora tio n. Area measurements label B A E F D C A1 3 ± 3 mm (0.5 1 ± 0.12 inch ) B 80 mm (3.1 5 in che s) C 4.2 mm (0.165 i[...]

Prin tabl e ar ea Area measurements: Pre-pr inted pa per Pre-prin ted paper is paper with white space in the midd le and rule d li nes, lett ers, o r f igur es pr inte d in t he t op and bott om marg ins. The mar gins are printe d th e first time t he paper is loa ded in the printe r, a nd a d ocument is prin ted in t he w hite spac e t he s econ d[...]

Before prin ting on p re-pr inte d sh eets , v erify that the area your docum ent will print on does not overlap the pre-printed area by printing separate samp le sh eets and comp ari ng t heir p rin ted ar ea s. Mechanical Paper feed meth ods: Push tracto r (fron t and rear ) Push-pull fe ed wit h optional pull tra ctor Total print volume: 2 6 mil[...]

Electrical 120 V model: Rate d volt age AC 12 0 V Inp ut v oltag e ra nge AC 99 t o 132 V Rate d freq uen cy rang e 5 0 to 60 Hz Inp ut fre quen cy ra nge 49.5 to 60 .5 Hz Rate d cu rren t 3.5 A (m ax. 7.5 A ) Power cons umption Approx. 16 0 W (ISO/I EC 10561 Letter Patter n) Ener gy St ar co mpl iant 220-2 40 V mode l: Rate d volt age AC 22 0 to 2[...]

Safety approvals 120 V m odel: Safet y stan dards UL195 0 with D3 CSA C22.2 No. 95 0 with D3 EMI FCC p art 1 5 sub part B cla ss B CSA C108.8 class B 230 V m odel: Safet y standa rds EN 60950 (V DE, NEMKO) EMI EN 55022 (C ISPR pub. 22) clas s B AS/NZS 35 48 clas s B Acoustic noise: Appro x. 58 d B (A ) (IS O 77 79 p atte rn) CE marking 230 V m odel[...]

Parallel Interfa ce Specifications The prin ter co mes wit h a bi directi onal, 8-bit, para llel int erface a nd a Type-B opt ional int erface s lot. Forward channel Transmis sion mode: 8-bit pa rallel , IEE E-128 4 compatib ility mode Adapta ble conn ector: 57-3036 0 (Am phenol ) or e quiv alent Synch ron izat ion : STROBE pulse Handsh aking: BUSY[...]

Serial Interface Specifications The D FX-85 00 bu ilt-i n se rial i nter face is an RS -232 C asy nch ronou s inter face wit h the fo llowi ng charact eristi cs. Data fo rmat: 1 start bi t Data wor d le ngth : 8 bits Odd, eve n, no parity, or ig nore 1 or more stop bit Signal level: Mark logic al “1” ( − 3 V to − 25 V) Space lo gical “0 ?[...]

Envir onmen tal : Tem per atu re Op era tio n: 5° to 35°C (41° to 95 °F) Storag e: − 30° to 60°C ( − 22° to 140°F ) Humidity (without condensation) Oper ation : 10% to 80% RH Sto rage : 5% to 85% RH Dimens ions an d weig ht Hei ght: 130 mm (5. 1 inche s) Widt h: 510 mm (20.1 in che s) Depth: 110 mm (4.3 inches ) Weight : 6.4 kg (2.9 l b[...]

Appendix B Printer Command s and C har acter Tables Proof Sign-off: Yano _______ Tavet ian _______ EPS ON ESC /P Cont rol Code s . . . . . . . . . . . . . . . . . . . B-2 Bar co de c omm and s . . . . . . . . . . . . . . . . . . . . . . . B -3 IBM 2381 Plu s E mul atio n Co ntro l Co des . . . . . . . . . . . . . B- 6 Cha rac ter Ta bles . . . . . [...]

EPSO N ESC/P Control Codes Select ing EP SON ESC/P prin ter in yo ur so ftwa re a llows yo u to use the most adva nced f ont a nd g raphi cs ha ndling av ailabl e. See the ESC/P Reference Manual for de tails. Gene ral oper ation: ESC@, ESC U, ESC EM Paper feeding: FF, LF, ESC 0, ESC 1, ESC 2, ESC 3, ESC A, CR Page for mat: ESC ( C, E SC C, ES C C 0[...]

Barcode commands Your pr inter has powe rful b arc ode pr inti ng ca pab ilitie s and inclu des t he fol lowin g reside nt bar code fonts : EAN-1 3, EAN- 8, Inte rleav ed 2 of 5, UPC-A, UPC-E, Code 3 9, Code 12 8, and POSTNE T. See the B arcode comma nds be low: ESC ( B Sele ct Barcod e Printin g Format : ASCII code: E SC ( B m n Decimal: 27 40 66 [...]

c : Co ntrol flag Bit 0 = Che ck di git 0: The printer does n ot add A check digit. 1: The pr inter ad ds A chec k digit. Bit 1 = Huma n read able ch aracter (HRC) 0: The printer adds the H RC. 1: T he print er d oes not add the HRC . Bit 2 = P osi tion of fl ag c har act er (f or E AN- 13 a nd U PC-A onl y) 0: Ce nter 1: U nde r Bits 3 − 7 = No [...]

The vali d data of eac h barcod e type is des cri bed be low. If inv alid da ta is included in the barcode data str ing, the barcode is not printed. Barcode type Barcode data EAN13 EAN-8 UPC-A UPC-E Interleave d 2 of 5 POS TNET Code 39 Code 128 0-9 (Hex 30 -39) 0-9 (Hex 30 -39) 0-9 (Hex 30 -39) 0-9 (Hex 30 -39) 0-9 (Hex 30 -39) 0-9 (Hex 30 -39) 0-9[...]

IBM 2381 Plus Emulati on Cont rol Codes This pr inter emulates t he IBM Pr oprinter with th e followi ng command s. For deta iled inf ormat ion, see IBM ’ s 2381 Pl us refer en ce m anual . Gene ral oper ation: NUL, D C3, ESC j, BEL, CAN, DC1 , ESC Q , ESC [ K, ES C U, ESC [ F Paper feeding: FF, LF, ESC 5, E SC A, ES C 0, ESC 1, E SC 2, ESC 3, CR[...]

Char acter Tables Thes e cha rac ter ta bl es are select ed wit h th e DIP sw itch es or by usi ng a software comm and . Note: Characters for hex codes 00 through 7F for most tables are the same as those for PC437. Therefore, some tables may only list characters for h ex cod es 80 through FF. Table s wi th a n as teri sk (* ) aft er t he t able nam[...]

PC437 (USA, standar d Europ e) PC850 (Multilingual) PC 860 (Portugue se) B-1 B-2, B- 3 L Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 B-8 P rinter Commands and Character Tables[...]

PC861 (Icelandic) PC863 (Canadian-French) PC865 (Nord ic) Ab icomp B-4, B- 5 B R Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 Printer Commands and C haracter Tables B- 9[...]

Roman 8 BRAS CII IS O La tin 1 B-8, B- 9 L Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 B-10 Printer Commands and Character Tables[...]

PC437 Greek PC852 (East Europe)* PC853 (Turkish)* PC855 (Cyrillic)* B-12, B-13 B R Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 Printer Commands and Character Tables B-11[...]

PC857 (Tur kish)* PC866 (Russian) * PC869 (Gr eek)* MAZOW IA (Poland)* B-14, B-15 B-16, B-17 L Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 B-12 Printer Commands and Character Tables[...]

Code MJK (C SFR)* ISO 8859-7 (Latin/Greek)* ISO La tin 1T ( Turkis h)* Bulgar ia (Bul gari an)* B-18, B-19 B-20 B R Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 Printer Commands and Character Tables B-13[...]

Estonia (Eston ia)* PC774 ( LST 1283 : 1993) * ISO 8859-2* PC866 LAT. (Latvian)* L Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 B-14 Printer Commands and Character Tables[...]

PC866UKR * PC APTEC (Arabic)* PC708 (Arabic)* PC720 (Arabic)* B-21 B R Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 Printer Commands and Character Tables B-15[...]

PC AR864 ( Arabic)* I talic No char acter is availab le for he x code 15 in the italic cha racte r table. L Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 B-16 Printer Commands and Character Tables[...]

Interna tio nal c haract er se ts You can select one of the following inter national chara cter sets with the DIP switches or by sendin g the ESC R comma nd. For exa mple, wh en you sele ct “It alic Franc e,” th e cha racte rs i n the “F rance ” row on the table below are us ed in th e ital ic c harac ter ta ble. The fol lowin g ei ght inte[...]

Symbo l set Chara cters defi ned in the fol lowin g sy mbol set c an be pr inted using the ESC (ch aracters) or ESC ^ (one character) s oftware command. This i s avai lable in the IBM e mulation mode. L Peony Rev.C A5 si ze App end ix B 98/0 1/07 Pas s 3 B-18 Printer Commands and Character Tables[...]

Appendix C Contac ting Custom er Suppo rt Proof Sign-off: Yano _______ Tavet ian _______ _______ For Un it ed S ta tes and Ca nad a U ser s . . . . . . . . . . . . . . . C- 2 For Unite d Kingdom and the Republic of I reland Users . . . . C-4 Enquiry Desk . . . . . . . . . . . . . . . . . . . . . . . . . . C-4 Customer Support . . . . . . . . . . . [...]

If your printe r is not oper ating prope rly and you c annot solve the prob lem usin g the tr oubl eshoo tin g info rmati on in this guide , cont act cust omer suppo rt ser vices f or assi stan ce. We will be able to h elp you much more quickly if you give us t he followin g informati on: Serial numb er of your prin ter. (The se rial n umber la bel[...]

Automated t elephon e servic es Servi ce Acces s EPSO N So und Adv ice  For pr e-recor ded answers to comm only ask ed questions ab out EPSON products 24 hours a day, seven days a week, call (800 ) 4 42-21 10 . EPSON FaxAdvice  Acce ss EP SON ’s tec hnical info rmatio n library by calling (800 ) 442 -21 10 . You must pro vide a return fax n[...]

For Unit ed K ingdom and th e Rep ubli c o f Irel and Users If y ou pu rcha sed your prin ter in t he UK or the Rep ublic of I relan d, Epso n (UK) Li mit ed pro vides a range of cust om er serv ices an d techn ical support. Note: For customers in the Republic of Ireland, please use the c orrect dialing codes when dialing the UK telephone numbers l[...]

Faxon EPSON Contact Faxon EP SON Fa xback Servi ce for: T Lite ratur e and spe cifi catio ns on th e late st EPS ON produc ts T Suppo rt in form ati on inclu ding tr oubl eshoo tin g tips, switch setti ngs and dr iver in form ati on To use Faxon EPS ON, cal l 01 442 2273 32 us ing a tou ch -ton e phon e. You will be asked to follow a simple routine[...]

For Australi an Users EPSON Aust rali a wi shes t o p rov ide yo u wi th a hig h le vel of Cu stom er Service . As well as th is User’s Guide , we pr ovid e the fo llow ing so urce s for obta ining informa tion: EPSON FAXBACK EPSON FAXB ACK wi ll fa x yo u th e la test s peci ficat ions and prici ng fo r most EPSO N pr oduc ts o ffer ed i n Aust [...]

EPSON Helpdesk EPSO N Help desk is p rov ided a s a fina l ba ckup to make sure our clie nts have acce ss to advi ce. Ope rators on th e Hel pde sk ca n aid you in diag nosin g hardwa re and softwar e proble ms. They can al so advis e you on the late st EPS ON products and wher e the neares t deal er or s ervice agent is located . Many types of que[...]

Internet home page EPS ON Hon g Kong ha s esta blis he d a local ho me pa ge in bot h Chi nese and E nglish on the In ternet t o provid e users with th e followi ng info rmati on: T Product information T Answer s to Frequent ly As ked Questions (FAQs) T Latest vers ion s of EPSON prin ter drivers Users can access our Worl d Wide Web home page at: h[...]

Glos sary Thes e de finit ion s app ly sp ecif ical ly t o pr inte rs. application A sof twa re pr ogr am th at h elps you carry out a pa rtic ular tas k such as word pro cessi ng or fi nancial plan ning . ASCII Americ an S tandard Code for In formati on Int ercha nge. A stan dard ized coding sys tem for assig ning numeric al c odes to le tters and[...]

continuous form s with labels A kind of continuous paper that has one labe l on each page. This is diff erent f rom la bel pap er, whi ch cons ists ent irel y of lab els. Wh en prin ting on cont inuous fo rms with la bels, th e printer must ad just the heig ht of th e prin t he ads for th e e xtr a thic kne ss o f th e la bels . Be fore prin ting o[...]

hex dump A tro ubl esho otin g fea tur e that hel ps adva nced user s detec t th e caus e of communication problems between the prin ter and computer. When the prin ter is in hex du mp m ode, it pr ints each cod e that it receiv es in hexadecimal nota tion and ASCII code. Also called data dump. high-speed draf t One of th ree print qua lities avai [...]

overlappin g multi-par t forms A kind of continuous paper that provides you with multi-part forms. The page len gth of the mu lti -part forms i s lon ger than that of t he bac kin g conti nuou s pa per . So whe n ex tend ed, one page ’s m ulti -par t form s ov erl ap the next page ’s multi -par t forms . The thi cknes s of t his over lapp ing a[...]

push tractor A devi ce th at fe eds c ontin uous p aper th roug h the pri nter . Both th e fron t and re ar buil t-i n tract ors are push tr act ors; th ey pus h the paper th roug h the printe r to the print head. RAM Random Access Memor y. The portion of the print er’s memory that is used as a buff er and fo r sto ring user -defin ed charact ers[...]

L Peony Rev.C A5 size Glossary 98/0 1/07 Pas s 2 GL-6 Glossary[...]

Index A Adjust ing th e paper position, 3-17–20 printing position, 3-20 tear -off p osi tion , 3-2 3–25 top-of-form position , 3-17–19 Aut o CR (carri age re turn) se tting, 4-18 Auto cut mode setti ng, 4-19 Auto I/F wai t time settin g, 4-20 Auto lin e fee d se tting, 4-18 Auto te ar of f se tting, 4- 17 B Barco de co mman ds, B- 3– 5 Bee [...]

F Feat ures, pr inte r, 1 Font button , 4-4 lights , 4-3 Front/ Rear butto n, 4-7 H Hex dum p, 4- 8, 8-6–7 I IBM chara cte r tabl e settin g, 4 -18 IBM emulation mode, 4-19, B-6 I/F mo de settin g, 4 -20 Input buffe r settin g, 4-19 Inte nsity sett ing, 2-7, 2-12 Inte rfac e ca ble , c onne cti ng, 1-11– 15 Inte rface sp ecif icat ions, A-16–[...]

Pape r s ize sett ing, 2-7, 2-11 , 2-1 5 Paper sour ce se ttin g, 2- 7, 2 -11, 2-1 5 Paral lel inte rfac e specif icat ion, A -16 Pause button , 4-7 ligh t, 4- 3, 8 -3–4 Perforatio n cutter attac hi ng t he ou tp ut at tac hme nt and ou tput tra y, 6-16–1 7 instal ling , 6-13–15 remo vin g, 6 -20–2 3 paper ha ndli ng, 6-1 8–19 Perforated [...]

T Tear Off butt on, 4-5– 6 light, 4- 3 Tear-off mod e, 3 -21 –22 posi tion, adj ustin g, 3 -23–2 5 Tear ing of f prin ted pag es, 3-2 1–25 TOF button , 4-5 light, 4- 3 Top-of-form posi tion, adjust ing th e, 3-17 –19 Trac tors, swi tch ing, 3- 26–27, 6- 19, 6-31 Tracto rs, usin g, 3 -2–33 Tractor Sele ct button , 4-7 lights , 4-4 Tran[...]