Epson Stylus Pro 4900 + SpectroProofer UV инструкция обслуживания

User's Guide NPD4275-01 EN[...]

Copyrights and Trademarks No part of this publication may be reproduced, stored in a retr ieval system, or t ransmitted in an y form or by any means, electr onic, mechanical, photocopying, recording, or otherwise, with out the prior written permission of Seiko Epson Cor poratio n. The in formatio n conta in ed herein is designed only for use with t[...]

Contents Copyrights and Trademarks Introduction I m p o r t a n t S a f e t y I n s t r u c t i o n s ................ . 6 When choosing a place for this produc t. . . . . . . . 6 W h e n s e t t i n g u p t h i s p r o d u c t ............. .. 6 W h e n u s i n g t h i s p r o d u c t ....... ........... . 6 W h e n h a n d l i n g t h e i n k c a[...]

M u l t i - P a g e P r i n t i n g ............... ........ 7 6 Manual Double-Sided Printing(Windows only) ............... ............ ........... 7 8 Cautions when Performing Double-Sided P r i n t i n g .................. ............ 7 8 S e t t i n g P r o c e d u r e s f o r P r i n t i n g ............. 7 8 Poster Printing (Enlarge to cover[...]

H e l p f o r U s e r s i n E u r o p e .............. ... 1 6 6 H e l p f o r U s e r s i n T a i w a n ......... ........ 1 6 6 H e l p f o r U s e r s i n A u s t r a l i a ............... 1 6 7 H e l p f o r U s e r s i n S i n g a p o r e ........ ....... 1 6 7 H e l p f o r U s e r s i n T h a i l a n d ................ 1 6 8 H e l p f o r U [...]

Introduction Important Safety Instructions Read all of these instructio ns before using the printer. Also be sure to follow all warnings and instructions marked on the printer. When choosing a place for this product ❏ Place this product on a fl at, stable surface that i s larger than this product . This product will not operate pr operly if i t i[...]

❏ Always turn the product off using the Po wer button on the control panel. When this button is pressed, the Power light flashes brief l y t h e n g o e s o f f . D o n o t unplug the power c ord or turn off the produ ct until the Power light stops flashing. When handling the ink cartridges ❏ Keep ink cartridges out of the reach of children and[...]

Printer Parts Front section A Front cover Remove when replacing the built-in cu tter or installing the optional Sp ectroProofer. Normally installed when using the printer. B Cartridge cover (left) Open when replacing ink cartridges. U “Replacing Ink Cartridges” on p age 120 C Paper cassette Load cut sheets from 8 to 17 inches wide. U “Loading[...]

F Paper eject support Support smooth eje ction of the pr inted paper by rai sing th e suppor ts when printing on plain roll paper and when the optional SpectroProofer is installed. U “ Loading ro ll paper” on page 29 G Front manual feeder Feed paper into this slot whe n printing on cut sheets that are 0.8 mm thick or thicker. U “Loading and E[...]

Manually feed pape r into this slot when printing cut sheets one at a ti me. U “Loading Manually from the Rear” on page 39 P Paper support Raise this support when manu ally feeding paper to load the paper pr operly. Supports paper to prevent it from falling forward or backward. Q Edge gui de Move left and right depending on the size of the pa p[...]

Rear/Spindle A Rear unit Remove if the paper jams, and then clear the jammed paper. Norma lly installed when using the printer. B Roll paper holder unit connector Always use with the cable connected. C USB interface connector Connects the USB cable. D Airflow vents Vents the air used to cool the ins ide of the printer. E LAN connector Connects the [...]

On : Connected. Flashing : Receiving data. H AC inlet Connects the power cabl e. I Movable flange (black) Fixes the roll paper placed on the spindle. Remove and install wh en loading or removing roll paper on the spindle. J Spindle When you want to load roll paper into the printer, place the roll paper on the spindle. K Attachment Install when plac[...]

Control panel A P light (Power light) The printer's operational status is indicated by a lit or flashing light. On : The power is on. Flashing : Receiving d ata or performing processes such as turning off the power, head cleaning, auto nozzle check, or changing the type of black i nk. Off : The power is off. B P button (Power button) Turns the[...]

G r button (Menu button) ❏ If pressed in the ready status or when no paper is loaded, the Menu is displayed. U “Menu Operations” on page 99 ❏ If pressed while pri nting, the Printer Status menu from the Menu is displa yed directly. U “Print er S tatu s menu” on page 106 ❏ Goes to the next screen (Menu > Item > Parameter) if pres[...]

Displays the printer's stat us, operation, and error messages. U “When an Error Message is Displayed” on page 129 B Paper Source Settings The following icons indicate the paper source status set by the l button. You can also make the same settings from the printer driver. When printing from the printer driver, the printer driver settings a[...]

D SpectroProofer Usage Status The following icons indicate the installation status of the optional SpectroProofer. : Installed. No icon : Not ins talled, or it is not in stalled corre ctly. E Type of black ink Displays the selected type of black ink. F Maintenance Box Status The status of Maintenance Box 1 and 2 is indicated as follows. : There is [...]

: Narrow : Wide : Wider : Widest ❏ Indicates the selected number out of Custom Paper in the Menu. U “Paper Set up menu” on page 106 Printer Features This printer is a wide-format ink jet color printer supporting 17 i nch paper. The main features of this printer are described below. Realizing High Resolution By implemen ting Epson Ultr aChrome[...]

Realizing High Productivity Excellent color stability l eads to efficient printing The color stabilizes in a short time so i t can safely be used for pre-press workflow and color editing, i ncreasing work efficiency. Automatically switch roll paper and cut sheets for printing You can load roll paper in th e printer and load cut sheets in the paper [...]

Freely placing print da ta made by various applications using Layout Manager This function allows you to place multiple print data made by different applicatio ns freely on one sheet to create posters and display articles. U “Layout Manager(Window s only)” on page 89 Improved energy efficien cy with sleep mode and Power Management When no print[...]

❏ When using the printer, observe the operating temperature and humidity range described in the "Specifications Table". U “Specifications Table” on page 163 Even when the conditions above are met, you may not be able to print properly if the environmental conditions are not suitable for the paper. Be sure to use the printer in an en[...]

❏ Do not leave the printer without ink cartridges installed. If the print head (nozzles) d ries, you may not be able to print. Leave ink cartridges in all slots even while you do not use the printer. ❏ Because the green IC chip contains the cartridge's own information such as the remaining ink level, you can still reinstall and use t he in[...]

Tip: Typically, print outs and phot os fade over time (col or distortion) due to the effe cts of light and various constituents in the air. This also applies to Epson special media. Howev er, with the correct storage method, the degree of color di stortion can be minimiz ed. ❏ See the manuals supplied with Epson spec ial media for detailed inform[...]

Introducing the Supplied Software Contents of the Software Disc To use this printer, install the printer driver from the supplied software disc. Th e printer driver is already installed if you ran Easy Insta ll when setting up. As well as the printer driver, you can find the following software on the Software Disc supplied. Select from the Software[...]

Software Name Installed by Easy Install Summary ICC Profile (Adobe) - Install this when you need to enter a profile whe n performing color management. EPSON LFP Remote Panel 2 - With this software, you can update the printer's firmware and make custom paper settings from your computer. U “Using Epson Printer Utility 4” on page 58 EpsonNet [...]

Summary of the Printer Driver The main functions of the pr inter driver are described below. ❏ Converts print data receiv ed from applications into printable data and sends it to the printer. ❏ Allows the user to specify pr int settings such as the media type and paper size. Windows You can save these sett ings and easily import or export these[...]

Basic Operations Loading and Removing the Roll Paper We recommend setting Remaining Paper Setup before loading roll paper into the prin ter. See the following for more information on making settings. Also, when loading the Epson special media UltraSmooth Fine Art Paper, you need turn the Auto Roll Feeding setting to Off in advance. To turn the sett[...]

H Press the d / u buttons to select Roll Paper Length , and then press the r bu tton. I Press the d / u buttons to set the length of the roll paper, and then press the Z button. J Press the l button to return to the previous screen. K Press the d / u buttons to select Roll Length Alert , and then press the r button. L Press the d / u buttons to set[...]

Removing the attachment (when using two inch paper cores) A Remove the black flange and the attachment from the spindle. B Remove the attachment from both flanges. Press the hooks (two points) out to release the hooks, and then pull the attachment out of the flange. Installing the attachment (when using three inch paper cores) A Remove the black fl[...]

Removing the spacer A Remove the black flange from the spindle. B Remove the spacer. Hold the outer edge of the spacer and pull it straight off. Placing roll paper on the spindle Follow the steps below to set roll pape r on the spindle supplied with this printer. A Remove the black flange from the spindle. B Insert the spin dle into th e roll paper[...]

D Hold with the gray flange (fi xed) on the right, place both sides of the spindle into the spindle holder on the printer. Match the colors of the spindle hold er to the colors on the end of the spindle. Note: If the spindle is set in th e wrong direction, paper is not fed correctly. E Press the Y button on th e control panel. Insert paper until me[...]

J Slide out the output tray to the second and th ird extensions. Do not raise the flap. If the flap is raised while printing, the paper may not be ejected correc tly. Note: ❏ The output tray can only hold one sheet of roll paper at a time. Remove each sheet of roll paper as it is ejected without letting the sheets stack up on the output tray. Als[...]

Manual cut method If you set Off or Roll Paper / No Cut on the printer driver or control panel, you can cut the paper after printing using the following procedure. A While wa tching the inside of th e printer th rough the window in the printer cover, pres s the d button to feed the roll paper and adjust the cutting position to the mark on the insid[...]

Note: Always check that the roll paper is rewound before removing the spindle. If the roll paper is not rewound, the spindle may be locked. If you try to remove the sp indle when it is locked, the printer could be da maged. Tip: When removi ng the roll pape r, you can use the optional roll paper belt to prevent the roll paper from unwindin g. E Rem[...]

Loading Cut Sheets You can load cut sheets us ing the following three methods. Note: If the paper is wavy or cu rled, flatten the paper before loading it in the printe r, or use new paper. If wavy or curled paper is loaded, this printer may not be able to recognize the paper size, feed th e paper, or prin t correctly. We recommend that you return t[...]

Space at the rear When loading th ick paper or printin g from the paper cassette with the optional SpectroProof er installed, paper is ejected once fr om the rear of the pr inter before printing. Therefore, make s ure the following space is secured. If the printer is set up near a wall, make sure there is enough space at th e rear. Paper Size Rear [...]

C When loading super A3 or larger paper, extend the paper casset te to match the size of the paper. When loading A3 or small er paper, go to st ep 5 because the paper cassette does not need to be extended. Whether or not the paper cass ette is extended, the procedure for loading pape r after step 5 is the same. When extending the paper c assette, p[...]

Tip: ❏ You can lo ad up to 25 0 sheets (thickness 0.1 mm) of plain paper in the paper cassette. If paper is loaded above the ed ge guide mark ( d ), paper cannot be fed correctly. The maximum number of shee ts you can load in the paper cassette differs depending on the paper type. See the following for more information on the maximum number of sh[...]

For A4 Slide out the third extension of the output tray, raise the flap, and then pu sh the section back in. For A3 Pull out the third section of th e output tray, and then raise the flap. For super A3 or larger Slide out the second and third extens ions of the output tray, and then raise the flap. Make sure that you align the marks on the second e[...]

M Check the paper source settings. Check the paper source icon on the screen, and if it differs from the paper that you want to load, change the sett ing. : Prints on roll paper a nd cuts automatically after printing each page. : Prints on roll pap er but does no t cut after printing. : Prints on cut sheets. To change the setting, press t he l butt[...]

D Set the edge guide according to the width of the paper you want to load. E Insert the paper into the rear manual feede r with the printable side face up as shown in the illustration. Insert the pape r until it reaches the bottom. F Check that the leading edge of the pa per is inserted as far as the gray roller inside the printer. Press the d butt[...]

B Check the paper source settings. Check the paper source icon on the screen, and if it differs from the paper that you want to load, change the sett ing. : Prints on roll paper a nd cuts automatically after printing each page. : Prints on roll pap er but does no t cut after printing. : Prints on cut sheets. To change the setting, press t he l butt[...]

H Insert the paper and align its edge with the guide line on the output tray. I Feed the paper. When the paper is inserted, the scree n display changes to Press the Y button . Check that the screen display has changed, and then press the Y button t o automatically feed the paper to the start position. J Slide out the output tray to the second and t[...]

Basic Printing Methods (Windows) You can make pr int settings su ch as paper size and paper feed from the connected compu ter and then print. A Turn on the printer, and load the paper. U “Loading Cut Sheets” on page 34 U “Loading Roll Paper” on page 27 B When you have created the data, click Print from the File menu. C M a k e s u r e y o u[...]

Screen while printing The following screen is displayed when you start printing, and the Progress Bar (the computer's processing status) is displaye d. On this screen you can check the remaining ink level, product numbers for the ink cartridges, and so on. An error message is displayed if an error occurs or an ink cartri dge needs re plac ing [...]

Tip: When using Mac OS X 10.4, or if items on the Page Setup screen are not displayed on the Print scree n due to the appl ication bein g used in Mac OS X 10.7, 10.6, or 10.5 follow the steps below to display th e Page Setup screen. From the File menu of the application, click Page Setup . D Check that this printer is selected , and then set the pa[...]

Printable area This section describes t he printable areas for the prin ter. If the margin set in an application is larger than the following set ting values, sect ions beyond the specified margins are not printed. For example, if left and right margins are set to 15 mm in the Menu and an application attemp ts to print data to the full width, 15 mm[...]

* When printing with margins the default value is 14 mm. The default value for the bottom margin is 17 mm when printing borderless on the left and right. Changing the Type of Black Ink This printer allows you to set both photo black ink and matte black ink and switch between them depending on the paper type. Photo Black ink reduces the grainy feeli[...]

Changing from the printer driver Normally , the required type of black ink is specified from the printer's Ink Menu. However, when pr inting on paper that is compatible with both types of black ink, you can perform the following procedure to automatically switch the type of black ink from the printer driver. When printing on paper that is only[...]

Turning Off the Power Using Power Management This printer comes equippe d with the following two types of power saving settings. You can save power by transitioning into slee p mode or use the Power Management function to automaticall y turn off the power when the printer has no t been used for a certain period of time. ❏ Sleep mode The printer e[...]

Canceling Printing There are a few ways to stop printing operations depending on the situation. When the computer has fini shed sending data to the printer, you cannot cancel the print job from the computer. Cancel on th e printer. Canceling from the computer (Windows) When the Progress Bar is displayed Click Stop . When the Progress Bar is not dis[...]

Using the Printer Driver (Windows) Displaying the Settings Screen You can access the printer driver in the following ways: ❏ From Windows applications U “Basic Printing Methods(Windows)” on page 43 ❏ From the Printer icon From the Printer icon Follow the steps below when specifying common settings among applications or performi ng printer m[...]

Displaying Help You can access the printer dr iver help in the following ways: ❏ Click Help ❏ Right-click on th e item you want to check Click the Help Button to Display By displaying help, you can use the contents page or keyword search to read the help. Right-click on the item you want to check and display Right-click the it em, and then clic[...]

Customizing the Printer Driver You can save the s ettings or change the display items as you prefer. Saving various settings as your Select Settings You can save al l of the setting items in the print er driver. A Set each item for the Main screen and the Page Layout screen that you want to save as your Select Settings. B Click Save/Del. on the Mai[...]

C Enter any name in the Name box, and then cl ick Save . You can save up to 100 settings. You can choose a setting you have registered from the Media Type list box. Tip: You can save the settings as a file by clicking Export . You can share the settings by clicking Import to import the saved file on another computer. Rearranging display items To di[...]

Summary of the Utility Tab You can perform the following maintenance functions from the printe r driver's Utility tab . Nozzle Check This function prints a nozzle check pattern to check if the print head nozzles are cl ogged. If you see banding or gaps in the print outs, perform head clean ing to clear any clogged nozzles. U “Cleaning the pr[...]

Menu Arrangement You can arrange display items, Select Setting , Media Type , and Paper Size , for exampl e, you can reorder them by the frequency of your access. U “Rearranging display items” on page 54 Export or Import You can export o r import the printer d river settings. This function is useful when you want to make the same printer driver[...]

D Select the target printer icon, and then click OK . Tip: You can al so remove Epson Network Utility by clicking th e Utility tab and selecting the Epson Network Utility . However, if you are using other Epson printer(s), their pri nter driver(s) may al so be using the Epson Network Utility. If you are using other Epson printer(s), do not remove E[...]

Using the Printer Driver (Mac OS X) Displaying the Settings Screen The display meth od of the printer driver setting screen may differ depending on the application or the OS version. U “Basic Printing Methods(Mac OS X)” on page 44 Displaying Help Click in the printer driver setting screen to display Help. Using Epson Printer Utility 4 You can p[...]

EPSON Status Monitor You can check the printer's s tatus, such as the remaining ink level and error messages, from the computer's screen. Nozzle Check This function prints a nozzle check pattern to check if the print head nozzles are cl ogged. If you see banding or gaps in the print outs, perform head clean ing to clear any clogged nozzle[...]

G Double-click the Printer folder and then the Driver folder. Tip: If the fold er does not appear, do uble-click th e EPSON icon on the deskto p. H Double-click the ico n. I If the following screen is displayed, enter the password for the use r logged in to the Mac OS X, and then click OK . J If the license agreement scree n is displayed, confirm t[...]

Printing Varieties Auto Correct Color and Print Photos (PhotoEnhance) The printer driver for this printer comes with the Epson proprietary function PhotoEnhance that makes the most efficient use o f the color re production area, corrects image data to improve colors before printing. By using PhotoEnhance, you can correct photo colors to match the s[...]

C On the PhotoEnhan ce screen, you can set effects to apply to the print data. See the printer drive r help for more details on each item. D Check other settings, and then start printing. Correct color and print The printer driver automatical ly and internally corre cts colors to match the col or space. You can selec t from the following color corr[...]

In other applications, set No Color Management . Example of Adobe Photoshop CS4 Open the Print screen. Select Color Management and then Document . Select Printer Manages Colors as the Color Handling setting, and then click Print . B When the printer driver's Main screen is displaye d, select th e color correction mode. U “Basic Printing Meth[...]

Example of Adobe Photoshop CS4 Open the Print screen. Select Color Management and then Document . Select Printer Manages Colors as the Color Handling setting, and then click Print . B Display the Print screen. U “Basic Printing Methods(Mac OS X)” on page 44 C For Mac OS X 10.7, 10.6 and 10.5 select Color Matching from the list, and then click E[...]

E Make the necessary settings. See the printer drive r help for more details on each item. F Check other settings, and then start printing. Printing Black and White Photos You can print black and white photos with rich gradation by adjusting the image data color by the printer driver. The original data is not affected. You can correct image data wh[...]

Select Color Management and then Document . Select Printer Manages Colors or No Color Management as the Color Handling setting, and then click Print . B When the printer driver's Main screen is displayed, select Advance d B&W Photo as the Color . U “Basic Printing Methods(Windows)” on page 43 C Select Custom as the Mode setting, and th[...]

OS Color Management Settings Mac OS X 10.7, 10.6 and 10.5 Printer Manages Colors Mac OS X 10.4 No Color Management In other applications, set No Color Management . Example of Adobe Photoshop CS4 Open the Print screen. Select Color Management and then Document . Select Printer Manages Colors as the Color Handling setting, and then click Print . B Di[...]

D Make the necessary settings. See the printer drive r help for more details on each item. E Check other settings, and then start printing. Borderless printing You can print your data without margins on the paper. The types of borderless prin ting you can choose vary as shown below depending on the media type. Roll Paper: No margins for all edges *[...]

❏ Retain Size Create the print data larger than th e paper size in the applications to produce borderless output. The printer driver does not enlarge th e image data. Use settings such as Page Layout in the applicati ons to set the size of the image data as follows. - Create print data l arger than its actual print size by 3 mm on the left and ri[...]

About Roll Paper Cutting When performing borderless printing on ro ll paper, you can sp ecify whether it is left and right borderless printing or all edges borderless printing, and how to cut the paper in the printer driver's Roll Paper Option . The cutting operation for each value is shown in the fol lowing chart. Printer driver settings Norm[...]

Setting Procedures for Printing Making Settings in Windows A When the printer driver's Main screen is displayed, you can configure var ious settings required for printing such as Media Type , Source , Page Size . U “Basic Printing Methods(Windows)” on page 43 B Select Borderless , and then click Expansion . C Select Auto Expand or Retain S[...]

When using Mac OS X 10.4, or if items on the Page Setup scr een are no t displayed on the Print screen due to the application being used in Mac OS X 10.7, 10.6, or 10.5, display the Page Setup screen and make settings. B If Auto Expand is selected, set how much of the image goes beyond the edge of the pape r in the Expansion screen. Select Page Lay[...]

Enlarged/Reduced Printing You can enlarge or reduce the size of your data. There are three setting methods. ❏ Fit to Page printing Automatically enlarges or reduces the image size to fit the paper size. ❏ Fit to Roll Paper Width (Windows only) Automatically enlarges or reduces the image size to fit the roll p aper width. ❏ Custom You can spec[...]

B Select the size of the paper loaded in the printer from the Output Paper list. Fit to Page is selected as Reduce/Enlarge . C Check other settings, and then start printing. Making Settings for Mac OS X A Open the Print scr een, select Paper Handling from the list, and then check Scale to fit paper size . U “Basic Printing Methods(Mac OS X)” on[...]

B Select Reduce/Enlarge , and then click Fit to Roll Paper Width . C Select the width of the ro ll paper loaded in the printer from the Roll Width list. D Check other settings, and then start printing. Custom Scale Setting Making Settings in Windows A When the printer driver's Page Layout screen is displayed, set the same paper size as the dat[...]

B Set the scale in Scale . If Scale is not displ ayed on the Print screen, open the Page Setup screen , and then make the settings. You can now print as normal. Multi-Page Printing You can print multiple pages of your document on one sheet of paper. If you print continuous data prepar ed at A4 size, it is printed as shown below. Tip: ❏ In Windows[...]

Making Settings in Windows A When the printer driver's Page Layout screen is displayed, select th e Multi-Page che ck box, se lect N-up , and then click Settings . U “Basic Printing Methods(Windows)” on page 43 B In the Print Layout screen, specify the number of pages per sheet and the page order. If the Print page frames check box is sele[...]

Manual Double-Sided Printing (Windows only) You can easily print on bo th sides of the paper by printing out all even numbered pages and then flipping those pages over and reload ing them manually to print the odd numbered pages. Cautions when Performing Double-Sided Printing When performing double-sided printing, note the following points. ❏ Dep[...]

D When the odd pages have finished printing and the on-screen guide appears, reload the paper as instructed, and then click Resume . Poster Printing (Enlarge to cover several sheets and print - Windows only) The poster printing function aut omatically enlarges and divides the print data. You ca n join the printed sheets to create a large poster or [...]

Setting Procedures for Printing A Prepare th e print data using applications. The printer driver automatically enlarges the image data when printing. B When the printer driver's Page Layout screen is displayed, select th e Multi-Page che ck box, se lect Poster , and then click Settings . U “Basic Printing Methods(Windows)” on page 43 C In [...]

Tip: Regarding the size afte r joining together: When Borderless Poster Print is cleared and printing with margins is selected, the Pr int Cutting Guides items are displaye d. The finished size is the same whether or not Trim Lines is selected. However, if Overlapp ing Alignment Marks is selected, the finished size is smaller with an overlap. E Che[...]

B Lay the upper left sheet on to p of upper right sheet. Lineup the X marks as shown in the illustration below, and temporarily fasten them using an adhesive tape on the back. C While two pages are overlapping, cut the m along the alignment mark (vertical red line). D Join the left and right sheets toge ther. Use an adhesive tape to stick the backs[...]

J After joining all of the sheets together, cut the margins along the outer guide lines. Printing on custom paper You can also print on paper sizes that are not already available in the printer drive r. If you creat e and save a user-defined paper size using the steps below, you can select the saved pape r size from Page Setup in the application. I[...]

Making Settings in Windows A When the printer driver's Main screen is displaye d, click User Defined . U “Basic Printing Methods(Windows)” on page 43 Note: You cannot select User Defined if Paper Cassette or Manual Feed is selected as the Sourc e and Borderless is selected as Paper Setting s . B In the User Def ined Paper Size screen, set [...]

C Enter the Width , Height for the Paper Size , and enter the margins, and then click OK . You can set the page size and printer margins depending on the printing method. Page Settings Page Size Prin ter Margins Sheet Supported media sizes 3 mm for top, left, and right 14.2 mm for bottom Roll Paper Supported media sizes 3 mm for top, bottom, left, [...]

Banner printing (on roll paper) You can print banners and panoramic pictures if you create and set print data for banner printing in your application. There are two ways to print a banner. Printer Driver Source Supported Applications Roll paper Document preparation software, image editing software, and so on * Roll paper (Ban ner) Applicati ons tha[...]

C Click Roll Paper Option , and then sele ct Normal Cut or Off from the Auto Cut list. D Click User Defined and match the paper size to the size of the data if necessary. Tip: If you are using applications that support banner printing, you do not need to set User Defined Paper Size if you select Roll Paper (Banner) as the Source . E Click the Page [...]

Making Settings for Mac OS X A When the Print screen is displayed, select the size of the data creat ed with the application in Paper Size . When using Mac OS X 10.4, or if items on the Page Setup scr een are no t displayed on the Print screen due to the application being used in Mac OS X 10.7, 10.6, or 10.5, display the Page Setup screen and make [...]

Layout Manager (Windows only) The Layout Manager function allows you to place multiple pieces of print data creat ed in differen t applications on the paper freely and print them at once. You can create a poster or display material by placing multiple pieces of print data where you like. Also, Layout Manager allows you to use paper effectively. The[...]

Setting Procedures for Printing A Check that the printer is connected and ready t o print. B Open the file you want to print in your application. C In the printer driv er's Main screen, select Layout Manager , and select the size of the document made in the application as the Size . U “Basic Printing Methods(Windows)” on page 43 Tip: The S[...]

Saving and Calling Layout Manager Settings You can save the Layout Manager screen arrangement and setting contents to a file. If you need to close your application in the middle of a job, you can save it to a file and then open it later to continue your work. Saving A On the Layout Manager screen, click File menu and then Save as . B Enter the file[...]

Color Management Printing About Color Management Even when using the same image data, the original image and the displayed image may look different, and the printed results may look different to the image yo u see on the display. Th is occurs due to the difference in characteristics when input devices such as scanners and digital cameras capture co[...]

Setting profiles Settings for the inpu t profile, printer profile, and intent (matching method) vary betw een three types of color management printing since their color management engines are used differently. Th is is because color management usage differs between the engine s. Make settings in the printer driver or application as described in the[...]

C Set color management to off. For Windows In the Main screen, sele ct Custom as the Mode setting, and select Off (No Color Adjustment) . Tip: When using Wi ndows 7/ Windows Vista/Windows X P ( S e r v i c e P a c k 2 o r l a te r a n d . N E T 3 . 0 ) , Off (No Color Adjustment) is automatically selected. For Mac OS X Select Print Settings from th[...]

Select Color Management and then Document . Select Printer Manages Colors as the Color Handling setting, and then click Print . When using applications without a color management function, start from step 2 . B In the printer driver's Main screen, select Custom as the Mode , select ICM , and then click Advanced . U “Basic Printing Methods(Wi[...]

D Furthermore, in Mac OS X 10.5 select Print Settings from the list, and then select Off (No Color Adjustment) from Color Settings . For Mac OS X 10.4 A Disable the color managem ent functions in the application. Depending on the type of the application, make the settings following th e table below. Applications Color Management Settings Adobe Phot[...]

❏ Driver ICM (Basic) Specify one type of profile and intent for processing the entire image dat a. ❏ Driver ICM (Advanced) The printer driver distinguishes the image data into the Image , Graphics , and Text areas. Specify three types of profiles and intents for processing each area. When using applicatio ns featuring a color management functio[...]

Intent Explanation Perceptual Converts th e data so that a more visually natural image is produced. This feature is used when a wider gamut of color is used for image data. Relative Colorimetric Converts the data so that a set of color gamut and white point (or color temperature) coordinates in the original d ata match their corresponding print coo[...]

Using the Control Panel Menu Menu Operations Primarily, the following two menus c an be set from the control panel. ❏ Menu You can display or print environm enta l settings such as custom paper sett ings when using non-Epson special media, and the printer status. Norma lly, perform settings f or print ing in the p rinter dri ver or appl ication .[...]

The following section explains using the Menu as an example. Epson Stylus Pro 4900/4910 User's Guide Using the Control Panel Menu 100[...]

Menu List The following items and parameters can be set and executed in the Menu. See the refere nce pages for more details on each item. Menu Item Par ameter Printer Setup U “Printer Setup menu” on page 103 Platen Gap Narrow, Standard, Wide, Wider, Widest Page Line On, Off Roll Paper Margin Default, Top/Bottom 15mm, Top 35/Bottom 15mm, 3mm, 15[...]

Menu Item Par ameter Paper Setup U “Paper Setup menu” on page 106 Roll Paper Remaining Remaining Paper Setup, Roll Paper Length, Roll Length Alert Cut Sheet Remaining Sheet Num ber, Sheet Number Alert Paper Type Photo Paper, Pr oofing Paper, Fine Art Paper, Matte Paper, Plain Paper, -, Custom Paper, No Paper Selected Custom Paper Paper No. 1 to[...]

Details of the Menu Printer Setup menu The factory setting is . Item Pa rameter Explanation Platen Gap Narrow S elect the platen gap which is the distance between th e print head and the paper. Normally, select Standard . Select a wider setting if printed images are smeared. If, upon performing he ad align ment you feel that it is still not complet[...]

Item Pa rameter Explanation Paper Skew Check On This setting is effective for roll paper only. Select whether to di splay ( On ) or not to display ( Off ) an error message on the control panel's scree n and whether or not stop printing if the paper is not straight. We recommend using On , because if the paper is not fe d straight, a paper jam [...]

Item Pa rameter Explanation Auto Roll Feeding On When using the Epson special media UltraSmo oth Fine Art Paper you must set this to Off before loading the paper. If set to On for UltraSmooth Fine Art Paper, the roller of the paper presser may leave a mark on the surface of the paper. When using p aper other th an UltraSmooth Fin e Art Paper, set i[...]

Printer Status menu You can check the printer's current st atus as displayed on the screen. Item Display Explanati on Version xxxxxxx,x.xx,x xxx You can see t he firmware version. Ink Level (Ink color) [E ********** F] You can see the status of each ink cartridge. The asterisks (*) disappear one at a time for every 10 % of ink consumed. You ca[...]

Item Parameter Explanation Roll Paper Remaining Remaining Paper Setup Off Select whether to disp lay/record ( On ) or not to display/record ( Off ) the amount of remainin g roll paper. This settin g is displayed on ly when roll p aper is not lo aded in the printer. When set to On , the parameters Roll Paper Length and Roll Length Alert are availabl[...]

Item Parameter Explanation Custom Paper (1 to 10) Paper No. 1 to 10 When usin g non -Epson med ia, you can sa ve the custo m paper settings according to the media characte ristics of that paper which are P laten Gap, Paper Thi ckness, Paper Fee d Adjust, Drying Time, and Paper Suct ion. You can save up to 10 by assigning t hem to Paper No. 1 to Pap[...]

Item Pa rameter Explanation Paper Type Photo Paper You can selec t the media type tha t is the cl osest to t he paper you are using. Proofing Paper Fine Art Pa per Matte Pape r Plain Paper Platen Gap Narrow U “Printer Setup menu” on page 103 Stand ard Wide Wider Widest Thickness Pattern Print Print a pattern to detect the thickness of the loade[...]

Item Pa rameter Explanation Paper Feed Adjust B -0.70 % to +0.70 % A djusts the paper feed adjustment value for the 1 to 2 cm region at the bottom of the cut sheets (the b ottom area of the paper). This setting is ignored when printing on roll paper. Adjust this value if you notice an y banding in this region of the paper. Drying Time 0.0 sec to 10[...]

Network Setup menu You can make settings for the network connection. After se tting the items, press the l button to return to the pre vious screen, and then the network is reset and a network co nnec tion is available after 40 seconds. This setting is not displayed while resetting. The factory setting is . Item Pa rameter Explanation Network S ett[...]

Ink Menu Table The settings and executable actions that can be performed on the Ink Menu are as follows. Executing Cancel closes the Ink Menu. See the following for more details on head cle aning and nozzle check. U “Adjusting the Pr int Head” on page 113 Item Pa rameter Explanation Auto Cleaning No When Yes i s s e l e c t e d , A u t o N o z [...]

Maintenance Adjusting the Print Head You need to adjus t the print head if white lines appear in your print outs or if you notice the print quality has declined. You can perform the following printer maintenance functions for maintaining the print head in good condition to ensure the best print quality. Carry out appropriate maintenance depending o[...]

❏ From the printer You can select from the follo wing two types. Auto Nozzle Check Print Check Pattern Tip: ❏ You cannot perform a nozzle check w hen the H light is on. ❏ For Print Check Pattern , print with th e black ink currently selected in the printer, regardless of the type of paper loaded. When printing the pattern on glossy paper with[...]

If The following nozzle(s) are clogged. is displaye d, press th e [ button to start Auto Cleaning. Press the Z button to close the Ink Menu. When the Ink Menu is cl osed, the message informing you which nozzle(s) are clogged is removed. When performing Print Check Pattern Review the printed check pattern while referring to the following section. Ex[...]

❏ Power cleaning consumes more ink than normal head cleaning. Check th e remaining ink level in advance, and prepare a new ink cartridge before you start cleaning if the ink is low. ❏ If the nozzles are still clogged after perfo rming power cleaning, turn off the printer and leave it overnight or longer. When left for some time, the clogged ink[...]

Correcting Print Misalignment (Print Head Alignment) Because there is a s mall distance between the print head and paper, misalignment may occur due to humidity or temperature, th e inerti al force of the pri nt head's movements, or by moving the print head bidirectionally. As a resu lt, print results may appear grainy or out of focus. When th[...]

B Click Print Hea d Alignment from the Utility tab in the printer driver's Properties (or Pr int Settings ) screen. Follow the on-screen instructions to align the print head. The sensor reads the adju stment pattern while it is printing, and automatically register s the optimum adjustment value to the printer. From the printer To perform Head [...]

Aligning the print head automatically A When the Menu is displayed, select Head Alignment - Alignmen t , and then press the r button. B Press the d / u buttons to select Auto , and then press the r button. C Press the d / u buttons to select the type of alignment pattern, and then press the r button. If you have already performed Head Alignment fro[...]

Replacing Consumables Replacing Ink Cartridges If one of the installed ink cartridges is expended, printing cannot be performed. If an ink low warning is displayed, we recommend replacing the ink cartridge(s) as soon as possible. If an ink cartridge runs out while printing, you can continue printing after replacing the ink cartridge. However, when [...]

Note: Removed ink c artridges may have in k around the ink supply port, so be careful not to get any ink on the surrounding area wh en removing the cartridges. E Remove the ink cartridge fro m the bag. Shake the ink cartridge for 5 seconds 15 times horizontally in approximately 5 cm movements as shown in the illustration. Note: Do not touch th e gr[...]

A Open the right-hand side cartridge cover. Press the groove in the cartridge cov er to open the cover. B Pull Maintenance Box 1 out. Lifting Maintenance Box 1 up r eleases the lock, and you can si mply pull it straight out. C Place the used Maintenance Box 1 in the clear bag included with your new Maintenance Box 1, and make sure that the zipper i[...]

A Remove the output tray. Lift the edge of the o utput tray slightly to re move it. Also re move the op tional Spectr oProofer if installed. B Release the Maintenance Box 2 lock. C Pull Maintenance Box 2 o ut carefully so that it does not tilt. c Caution: If ink should spill out onto your skin or into your eyes, wash the affected area with water im[...]

F Set the lock. G Attach the output tray. Return optional SpectroProofer if it was installed. Replacing the Cutter Replace the cutter wh en it is not cu tting paper cleanly. Supported cutter U “Options and Consumable Products” on page 151 Use a cross-head sc rewdriver to replace the cutter. Make sure you have a cross-head screwdriver with you b[...]

Remove when the optional SpectroProofer is installed. E Open the cutte r cover. Pull the cover towards you while holding down the lock as shown in the figure to open the cover. F Remove the old cutter from the printer. Loosen the screw hold ing the cutter in place using a cross-head scre wdriver and pull the cutter straight out. c Caution: Do not s[...]

H Close the cover. Push in the cover until you hear the upper portion click into place. I Return the front cover. Re-insert the four screws that hold the cover in place and use a cross-head screwdriver to tighten them down. Th e shape of the screws differ for the top and the front. Use the screws that come with a washer for the front section (the c[...]

Cleaning the Printer To keep your pr inter i n optimu m operat ing con dition, clean it regularly (about once a month). Cleaning the outside A Remove any paper from the printer. B Make sure the printer is turned off and th e screen has turned off, and then unplug the power cable from the electrical outlet. C Use a soft, clean cloth to carefully rem[...]

C Open the printer cover and use a soft, clean cloth to carefully clean away any dust or dirt inside the printer. Wipe the pink part shown in the following illustration. To avoid spreading the dirt, wipe from the inside to th e outsid e. If there is a serious dirt problem, clean it usi ng a soft, clean cloth dampened with a mild detergent . Then, w[...]

Problem Solver When an Error Message is Displayed If an error should occur with the printer (it is not working pr operly), the alert lamp and/or control panel light will light up and a message is displayed on the screen informing you of the problem. The messages displayed are described in th e following section. If you encounter an error message, r[...]

Error messages What to do Cartridge Cover Open Close right and left cartridge covers. Close the left and right cartridge covers. U “Replacing Ink Cartridges” on page 120 Cartridge Cover Open Close right cartridge cover. Close the cartridge cover on the right. U “Replacing Ink Cartridges” on page 120 Cleaning Error Automatic head cleaning fa[...]

Error messages What to do Ink Cartridge Alert Please use genuine Epson ink cartridges. Replace th e ink cartridge with a g enuine Eps on ink cart ridge that ca n be used with this printer. U “Options and Consumable Products” on page 151 U “Replacing Ink Cartridges” on page 120 Ink Cartridge Alert Replace ink cartridge(s). ❏ Remove the ink[...]

Error messages What to do No Front Cover Attach front cover then restart printer. Turn off the printer, then install the front cove r. Reinstall the dev ice correctly and then turn on the prin ter. Insta lling the front cover U “Replacin g the Cutter” on page 124 No Ink Cartridges Install ink cartridge(s). Install ink cartridges. U “Replacing[...]

Error messages What to do Paper Jam Remove paper from printer. Power off and then on. Refer to the "Roll paper jam", "Cut sheets from the paper casset te have jammed while p r i n t i n g " , o r " C u t s h e e t s f r o m t h e f r o n t / r e a r m a n u a l f e e d e r h a v e j a m m e d " s e c t i o n s o n t h [...]

Error messages What to do Paper Sensor Error Loaded paper or print out has a problem. Refer to manual for details. If this error is displayed when performing automatic head alignment check the following items. ❏ Did you load paper that is not suppo rted for automatic head alignment? Automatic head alignment cann ot be performed with plain paper o[...]

Error messages What to do Paper Source Error Roll paper i s loaded. Remove it and change paper source to cut sheet. Press the Z button to clear the message, and then remove the roll paper from the printer and change the source in the Pa per Type menu. When Auto Roll Feeding is se t to Off from the Menu, yo u cannot change the paper type when roll p[...]

Error messages What to do SpectroProofer Error Refer to the manual to find out how to solve the problem. XX (The error number is displayed instead of XX) Check the error number and handle the problem as follows. ❏ If error number 01 is displaye d Turn off the printer, and then remove the SpectroProofer mounter. Tur n on the printer when the cover[...]

When a Maintenance Call/Servi ce Call Occurs Error messages What to do Call For Service Code XXXX Power off and then on. If this doesn't work, note the code and call for service. A call for service occurs when: ❏ The power cable is not connected securely ❏ An error that cannot be cleared occurs When a call for service has occu rred, the pr[...]

Troubleshooting You cannot print (because th e printer does not work) Symptom What to do The printer does not turn on. Is the power cable plugge d into the electrical outlet or the printer? Make sure the power cable is se curely plugged into the printer. Is there any problem wi th the elec trical outlet? Make sure yo ur outlet works b y connecting [...]

Symptom What to do The printer is not communicating with the computer. Is the cable plugged in properly? Make sure the printer's interface cable is secu rely plugged into th e co rrect terminal of the computer and the printer. Also, make sure the cable is not broken nor bent. If you hav e a spare cable, try connecting with the spare cable. Doe[...]

Symptom What to do The printer stops printing. Is the status of print queue Pause? (Windows) If you stop printing or the printer stops printi ng because of an error, the print queue enters a Pause status. You cannot print in this sta tus. Double-click the printer icon in the Printers folder, and select Pause Printing from the Printer menu to clear [...]

The printer sounds like it is printing, but nothing prints Symptom What to do The print head moves, but nothing prints. Confirm the printer operation Print a nozzle check pattern. Because a nozz le check pattern can be printed without connecting to a computer, you can check the op erations and print status for the printer. U “Nozzle Check” on p[...]

The prints are not what you expected Symptom What to do Print quality is poor, uneven, too light, or too dark. Are the print head nozzles clogged? If the nozzles are clogged, specific nozzles do not fire ink and the print quality declines. Print a nozzle check pattern. U “Nozzle Check” on page 113 Was Head Alignment performed? With bidirectiona[...]

Symptom What to do The color is not exactly the same as another printer. Colors vary depending on the printe r type due to each printer's characteristics. Because inks, printer drivers, and printer profiles are developed for each printer model, the colors printed b y different printer mod els are not exactly the s ame. You can achieve simila r[...]

Symptom What to do The printed surface is scuffed or soiled. Is the paper too thick or too thin? Check that the paper specifications are compatible w ith this printer. For information about the me dia types a nd appropriate settings for p rinting on pa per from other manufacturers or when using RIP software, s ee the manual supplied wi th the paper[...]

Symptom What to do Too much ink is fired. Are the Media Type settings correct? Make sure that the printer driver 's Media Type settings match the paper that you are using. The amount of ink to be fired is co ntrolled according to the media type. If the settings do not match the paper loaded, too much ink may be fired. Is the Color Density sett[...]

Feeding or ejecting problems Symptom What to do Unable to feed or eject paper. Is the paper loaded in the corr ect position? See the following for the correct paper loading positions. U “Loading Roll Pa per” on page 27 U “Loading Cut Sheets” on page 34 If the paper is loaded correctly, check the condition of the paper that you are using. Is[...]

Symptom What to do Roll paper jam To remove jammed paper, follow the steps below: (1) Open the roll paper cover and cut off the pape r at the slot of the ro ll paper feeder usin g a cutter sold at a store. (2) Hold both ends of the spindle and lift up from the spindle holder. (3) Remove the jammed paper from the roll paper feeder /front manual feed[...]

Symptom What to do Cut sheets from the paper cassette have jammed while printing. To remove jammed paper, follow the steps below: (1) Remove the output tray and the paper cassette. (2) Remove the jammed paper from where the cassette wa s inserted. Cut sheets from the paper cassette have jammed while printing. (Continuation) (3) If paper is jammed i[...]

Symptom What to do Cut sheets from the front/rear manual feeder have jammed. To remove jammed paper, follow the steps below: (1) Remove the jammed paper from the rear/front manual feeder. (2) Open the printer cover and remove any other jammed paper if necessary. Turn off the printer, and then turn it ba ck on. Reload the paper and restart printing.[...]

Symptom What to do The red light is on inside the printer. This is not a failure. The red light is a light inside the print er. The printer status may not be displayed correctly when using EPSON Status Monitor 3 or EPSON LFP Remote Panel 2 over a network. Epson Network Utility may not be installed.( Windows) Select Epson Network Utility from the So[...]

Appendix Options and Consumable Products The following options and consumable products are available for use with your printer. (As of July, 2010) For the latest information, see the Epson Web site. Name Product Code Explanat ion Epson special media See the following section for media. U “Epson Special Me dia Table” on page 153 Ink cartridges C[...]

Name Product Code Explanat ion 2/3" Dual Roll Feed Spindle C12C 811251 Same as the spindle supplied with the printer. Borderless Print Spacer C12C811201 Same as the Borderless Print Spacer supplied with the printer. Roll Paper Belt C12C890121 SpectroProofer Mounter 17" C12C890631 Automates the color management process when installed on th[...]

Supported Media We recommend yo u use the following Epso n special media for high-quality printing results. Tip: For information about the media types and appropriate settings for printing on paper other than Epson special med ia or when using raster image processing (RIP) softw are, see the manu al supplied with the paper, or contact the dealer of[...]

Name Size Thickness Core Borderless Black ink ICC Profile Premium Semima tte Pho to Paper (260) 406 mm/16" 0.27 mm 3" ✓ PK Epson Stylus Pro 4900_4910 PremiumSemimattePhotoPaper 260.icc Photo Paper Gloss 250 432 mm/17" 0.25 mm 3" ✓ PK Epson Stylus Pro 4900_4910 PhotoPaperGloss250.icc Premium Glossy Photo Paper (170) 420 mm (A[...]

PK: Photo Black/MK: Matte Black Name Size Thickness Border less Cassette Capacity Black ink ICC Profile Premium Glossy Photo Paper 8" x 10" 0.27 mm - ✓ 100 PK Epson Sty lus Pro 4900_4910 PremiumGlossyPhot oPaper.icc A4 ✓ Letter (8.5" x 11") -5 0 11" x 14" - 20 US B (11" x 17") - A3 ✓ Super A3/B (329 x 4[...]

Name Size Thickness Border less Cassette Capacity Black ink ICC Profile Archival Matte Paper/ Enhanced Matte Paper A4 0.26 mm ✓ * ✓ 100 MK Epson Sty lus Pro 4900_4910 ArchivalMattePaper_ MK.icc/ Epson Sty lus Pro 4900_4910 EnhancedMattePape r_MK.icc Letter (8.5" x 11") - A3 ✓ * 50 Super A3/B (329 x 483 mm) A2 - US C (17" x 22&q[...]

Name Size Thickness Border less Cassette Capacity Black ink ICC Profile Velvet Fine Art Paper Letter (8.5" x 11") 0.48 mm - -- P K / M K Epson Sty lus Pro 4900_4910 VelvetFineArtPaper_ PK.icc/ Epson Sty lus Pro 4900_4910 VelvetFineArtPaper_ MK.icc Super A3/B (329 x 483 mm) ✓ * A2 - US C (17" x 22") ✓ * * You can specify and [...]

Usable Commercially Available Paper Size This printer supports the fo llowing paper specifications for non-Epson media. Note: ❏ Do not use paper that is wrinkled, scuffed, torn, or dirty. ❏ Although plain paper and recycled paper manufactured by other companies can be loade d and fed in the printer as long as they meet the following specificati[...]

❏ Setting with Custom Paper in the Menu, or from EPSON LFP Remote Panel 2 and saving to thi s printer U “Paper Setup menu” on page 106 ❏ Setting with the printer drive r and saving to your computer Windows: Set Custom Settin gs items in the Main screen and then save. U “Saving media settings” on page 53 Mac OS X: Set in th e Paper Confi[...]

Maintenance Mode List The factory setting is . Item Parameter Explanation Language Japanese Select the language used on the control panel's screen. English Frenc h Italian German Portuguese Spani sh Dutch Korean Chinese Length Units Metric Select the unit of length which is displayed on the contro l panel's screen or printed on the p atte[...]

Item Parameter Explanation Cut Sheet Remaining Off Choose whether or not to sh ow ( On / Off ) Cut S heet Remaining in the Menu. When set to On , Cut Sheet Remaining is displayed in the Menu, from which you can set the number of pages to trigger a runnin g low warning and the number of pages loaded in the paper cassette. On Sleep Mode 5 minutes The[...]

Notes When Moving or Transporting the Printer Perform the foll owing op erations when moving or transportin g the printer. As shown below, always lift the printer by placing your hands in the indentations on the left and right sides. Note: ❏ Only hold the required area; otherwise, the printer may be damaged. ❏ Move and transport the prin ter wi[...]

System Requirements The following system requirements are necessary to install and use the software for this printer . Windows Operating system Windows XP/Windows XP x64 Windows Vista Windows 7 CPU Pentium® 4 2.0 GHz or higher Memory 1 GB or more Available hard disk space 32 GB or more Interface Hi-Speed USB-Compatible with the USB 2.0 Specificati[...]

Printer Specifications External size * (W) 863 x (D) 766 x (H) 405 mm Weight Approx. 52kg (without ink cartridges) * When the paper cassette and output tray are stored Ink Specifications Type Special ink cartridges Pigment ink Black: Photo Black, Matte Black, Light Black, Light Light Black Color: Green, Yellow, Orange, Cyan, Light Cyan, Vivid Magen[...]

Where To Get Help Technical Support Web Site Epson’s Technical Support Web Site provides help with problems that cannot be solved using the troubleshooting information in your product documentation. If you have a Web br owser and can connect to the Internet, access th e site at: http://support.epson.net/ If you need the latest drivers, FAQs, manu[...]

Help for Users in North America Epson provides the technical support services listed below. Internet Support Visit Epson’s support website at http://epson.com/ support and select your product for solutions to common problems. You can do wnload drivers and documentation, get FAQs an d troubleshooting advice, or e-mail Epson with your questions. Sp[...]

Telephone number Fax number Address 03-5325077 03-5320092 1F., No.9, Ln. 379, Sec. 1, Jingguo Rd., North Dist., Hsinchu City 300, Taiwan 04-23291388 04-23291338 3F., No.510, Yingcai Rd., West Dist., Taich ung City 403, Taiwan 04-23805000 04-23806000 No.530, Sec. 4, Henan Rd., Nantun Dist., Taichung City 408, Taiwan 05-2784222 05-2784555 No.463, Zho[...]

❏ Sales enquiries and product information ❏ Product usage questions or problems ❏ Enquiries on repair service and warranty Help for Users in Thailand Contacts for information, support, and services are: World Wide Web ( http://www.epson.co.th ) Information on product specifications, drivers for download, Frequently Asked Questions (FAQ), and [...]

Help for Users in Hong Kong To obtain technical support as well as other after-sales services, users are welcome to contact Epson Hong Kong Limited. Internet Home Page Epson Hong Kong has established a local home page in both Chinese and English on the Internet to pro vide users with the following information: ❏ Product in formatio n ❏ Answers [...]

Location Telephone number Fax number Pune 020-30286000 / 30286001 /30286002 020-30286000 Ahmedabad 079- 26407176 / 77 079-26407347 Helpline For Service, Product info or to order a cartridge - 18004250011 (9AM - 9PM) - This is a Toll-free number. For Service (CDMA & Mobile Users) - 3900 1600 (9AM - 6PM) Prefix local STD code Help for Users in th[...]

Software License Terms Open Source Software Licenses Bonjour This printer product includes the open sourc e software programs which apply the Apple Public Source License Version1.2 or its latest versio n ("Bonjour Programs"). We provide the sour ce code of the Bonjour Programs pursuant to the Apple Public Source License Version1.2 or its [...]

1.6 "Modifications" mean any additi on to, deletion from, and/or change to, the substance and/or structure of the Original Code, any previous Modificati ons, the combination of Original Code and any previous Modifications, and/ or any respective portions thereof. When code is released as a series of files, a Modification is: (a) any addit[...]

2.3 Distribution of Executable Versions. In addition, if You Externally Deploy Covered Code (Original Code and/or Modifications) in object cod e, executable form only, You must include a prominent notice, in the code itself as well as in related documentation, stating that Source Cod e of the Covered Code is available under the terms of this Licens[...]

8. NO WARRANTY OR SUPPORT. The Covere d Code may contain in whole or i n part pre-release, untested, or not fully tested works. The Covered Code may contain errors that could cause failu res or loss of data, and may be incomplete or contain inaccuracies. Yo u expressly acknow ledge and agree that use of the Cove red Code, or any portion thereof, is[...]

(c) automatically without notice from Ap p l e i f Y o u , a t a n y t i m e d u r i n g t h e t e r m o f t h i s L i c e n s e , c o m m e n c e a n a c t i o n for patent infringement against Apple; provided that Apple did not first comme nce an action for patent infringement against You in that instance. 12.2 Effect of Termination. Upon te rmin[...]

EXHIBIT A. "Portions Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved. This file contains Original Code and/or Modifications of Orig inal Code as defined in and that are subject to the Apple Public Source License Version 2.0 (the 'License'). You may not use this file except in compliance with the License. Please obtai[...]

3. Altered versions--including, but not limited t o, ports to ne w operati ng systems, e xisting port s with new graphical interfaces, versions with modified or ad ded fu nctionality, and dynamic, shared, or stat ic library versions not from Info-ZIP--must be pl ainly marke d as such and must not be mi srepresented as being the original source or, [...]