Ergotron WM Low Profile Wall Mount, XL инструкция обслуживания

888-60-510-M-00 rev .B • 03/10 1 of 17 WM Large Display Low Pro le Wall Mount INSTRUCTIONS INSTRUCCIONES DE INSTALACIÓN NOTICE D’ASSEMBLAGE INSTRUÇÕES DE MONTAGEM Product Speci cations: W eight Capacity 79 kg (175 lbs) Mounting Options V erical Mount: W all plate attaches to vertical wall surfaces. Includes fasteners for w ood (16” o[...]

AB C 1 2 3 4 5 PENTA SCREW TOOL PENTA LOCKING SCREW M4x20mm M4x40mm M5x20mm M5x40mm M6x20mm M6x45mm M8x25mm 4x M8x50mm 4x 4x 4x 4x 4x 4x 4x M8x80mm 13mm 2 1 1x 1x 4x 4x 4x 1x 2x 2x v v MM MM 4x 4x 4x 8x 4x 5.1(ID) x 10(OD) x 6mm 5.1(ID) x 10(OD) x 18mm 8.1(ID) x 16(OD) x 24mm 5.3(ID) x 16(OD) x 1.0mm 6.3(ID[...]

888-60-510-M-00 rev .B • 03/10 3 of 17 Y ou don ’t like to r ead installation instructions? W e understand–but considering the major investment a lar ge display represents, this isn’ t the time to take shortcuts. At Er gotron we strive to provide high-quality products that are as quick and easy to install as possible–so please read throug[...]

a 1 888-60-510-M-00 rev .B • 03/10 4 of 17 * If a stand is already attached to your display , remove it acc ording to display manufacturer directions. Place the display on a clean,  at, padded sur face or , if you prefer , lean the display against a stable, vertical surface. Choosing Display Brack et Fasteners Notice that several sizes of scr [...]

v MM v MM b c Ø 888-60-510-M-00 rev .B • 03/10 5 of 17 TOP Arriba Haut Parte superior c Hole Depth Lay the display bracket ov er the display mounting holes and measure the depth of the display mounting holes with a slender stick. b Hole Diameter Four sets of displa y bracket screws have been pro vided, e[...]

a 2 b c 888-60-510-M-00 rev .B • 03/10 6 of 17 Compare this measur ement Compare this measurement to the recommended screw (based on display back type and diameter), taking into consideration the need for a minimum amount of thread engagement (the minimum thread engagement is the same as the diameter of the screw , for instance, the minimum threa[...]

3 MM MM MM 888-60-510-M-00 rev .B • 03/10 7 of 17 T est Fasteners It is impor tant that you t est the chosen fastener combination to be sure it is the right size for your displa y : par tially thread the screw into the display b y hand with the correct combination of washers and spacers (do not fully insert and do not tighten screw at th[...]

4 a b x 1 = y 2 x ≤ 800mm 888-60-510-M-00 rev .B • 03/10 8 of 17 b Tighten screws with at least six, full, 360° revolutions*, but do not ov er tighten; ov er tightening may cause damage to display and/or brackets. * Six full turns will ensure a minimum thread engagement roughly equal to the diameter of the screw . For instanc e, if the screw d[...]

5 10 Ø 3/8" (10 mm) Ø 3/16" (5 mm) 12 888-60-510-M-00 rev .B • 03/10 9 of 17 Wood Madera Bois Madeira Concrete Concreto Béton Betão W ALL PLA TE MOUNTING INSTRUCTIONS Ergotron provides fast eners for mounting the Tilting W all Mount to the f ollowing wall confi gurations: • Wall T ype I - Solid W ood Studs (2”x4”) 16” or 24[...]

a 6 b 888-60-510-M-00 rev .B • 03/10 10 of 17 Wood Madera Bois Madeira A T T ACH RAIL TO W ALL Solid W ood Studs W ARNING: Ensure that the wall structure is capable of supporting four times the total weight of mounted equipmen t. Mounting to wall surfaces that do not meet this criteria may result in an unstable, unsafe c ondition which could lead[...]

c d Ø 3/16" (5 mm) 14 888-60-510-M-00 rev .B • 03/10 11 of 17 c Hold rail against the wall to mark mounting holes. (Note rail orientation - front faces display , back faces wall - illustrated abov e.) Verify holes are lev el then drill pilot holes with 3/16” or 5mm W ood Drill Bit. d Hold Rail against wall and star t screws with washers. [...]

b 6 a 888-60-510-M-00 rev .B • 03/10 12 of 17 Concrete Concreto Béton Betão A T T ACH RAIL TO W ALL Solid Concrete * Before proceeding with this instal- lation, consult the manufacturer of your display for recommendations on choosing a mounting location that will ensure optimum performance. Loc ation considerations might include: mounting heigh[...]

c 3-1/8" (80 mm) Ø 3/8" (10 mm)   2x d 14 888-60-510-M-00 rev .B • 03/10 13 of 17 c Hold rail against wall to mark mounting holes. (Note rail orientation - front faces display , back faces wall - illustrated above .) Verify that the holes are level then drill pilot holes with pilot holes with 3/8” or 10mm Concrete Drill Bit. W [...]

    7 4x 4x a b 888-60-510-M-00 rev .B • 03/10 14 of 17 a Hold Rail against wall and star t screws with washers. b Tighten screws with 13mm socket head (power tool is rec ommended) in the following sequence: 1st-lower right; 2nd-upper left; 3rd-low er left; 4th-upper right. DO NOT OVERTIGHTEN SCREWS! For solid c oncrete applications, [...]

8 a b     888-60-510-M-00 rev .B • 03/10 15 of 17 Center of Displa y Located Over C enter of Stud - ALL OWED Centr o del monitor situado encima del centro de un larguero - PERMITIDO EPlatine centr ée sur les tasseaux mais écran ex centré sur la platine (les 2 étriers doivent être engagés) - A C CEPTE Centr o do Ecrã localizado [...]

9 LOCKING SCREW 2x SECURITY SCREW 2x ab   888-60-510-M-00 rev .B • 03/10 16 of 17 At the bottom of each of the display brackets, install and tighten either a Security Screws with Pentagon tool* b Locking Screws with Phillips screw- driver * The Pentagon tool has a special  ve- sided tip designed to deter theft - keep it in a safe place s[...]

888-60-510-M-00 rev .B • 03/10 17 of 17[...]