EverFocus EDH5240 инструкция обслуживания

2 Megapixel Full HDcctv Indoor IR Dome Camer a Operation Instructions Model No. EDH5240 Please read this manual first for correct installation and operation. This manual should be retaine d for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improv e its products. All sp[...]

- 1 - T ABLE OF CONTENTS 1. PRODUCT OVERVIE W .. .. ... .. .. .. ... .. .. ... .. .. .. ... .. .. ... .. .. .. ... .. .. .. ... .. .. ... .. .. .. .. ... .. .. .. .. ... .. .. .. .. ... .. .. .. .. .. 2 1.1 Main Features ....................................................... ................................................ ........................[...]

- 2 - 1. PRODUCT OVERVIEW The EDH52 40 is an HDcctv 3-axis indoor dome camera with true Day /Night capability plus IR illumination, in a housin g which can be surface or flush mounted. Based on a 2 meg apixel progre ssive scan sensor for your choice of 1080 or 720 resolution HD 100% digital images, it delive rs vastly super ior video qu ality compa[...]

- 3 -  4 shor t s cre ws to attach flush-moun ting clips  Rubber plug for side hole in outer base.  Mounting template  Power supply pigtail  Video test cable Accessory pack # 2 containing tw o flush mounting cli ps Please Note: If an item appears to have been da maged in shipment, rep lace i t pr operly in its c arton and no tify the[...]

- 4 - Certifications FCC/CE 1.4 Dimensions 2. MAJOR PARTS: NAMES AND FUNCTIONS Front View 2. IR LEDs 4. Light sensor 1. Outer Base 3. Lens 5. Cover[...]

- 5 - Side View Back View 1. Base The camera u nit s ets in the do me base, wh en it is shipp ed from the factor y . This base is used for surface mounting, and is discarded for flush mounting. 6. Focus Adjust 8. HDCC-TV Vi deo Output 9. Power Input 7. Zoom Adjust 10. Video T est Output 1 1. OSD menu joystick[...]

- 6 - 2. IR LEDs 3. Lens The include d vari-focal, DC iris lens a llows man ual adjus tment of the field of view (z oom & focus). 4. Light Sensor Light sens or is used to detect the lighting level the env ironme nt. (The light senso r is “dow n” when the interna l camera module is proper ly positioned). 5. Camera Co ver This cover will prot[...]

- 7 - 3. 3-AXIS GIMBAL BRACKET The 3- axis gimbal e nables installers to ea sily moun t the camera on a w all or ceiling a nd then using the built in t ilt an d du al ax is 18 0° twist, to adjus t th e v iewing angle to the desired direction. With this unique 3-ax is po sitioning system, installers can cap ture ima ges from vir tually any angle, w[...]

- 8 - 4. INSTALLATION An EDH5 240 camera may be mounted in two wa ys: surface mount and flush mount. Select the one that meets your need s. Installation - Surfac e Mount 1. Paste the drilling template on the ceiling or wall. Please refer to the drilling template below . 2. Use the appropr iate tool to drill the INNER holes, and a clear ance hole fo[...]

- 9 - 5. Pull the cable s to be con nected to pow er and vide o cables into the outer ba se from the ceiling or wall. Attach power supply pigtail adapter to powe r wire if needed. 6. T ake a long Phillips pan head scre w with a washer and tighten it into a plastic anchor . Repeat the same step until all the 4 screws are fixed to the wall. 7. Attach[...]

- 10 - 8. I n sert inner b ase int o outer base a nd secure using the 4 Phillips r emoved in the ear lier step. Prepos ition camera so it is facing approx imately in the desired direction. 9. A ttach video test cable to tes t point o n r ear of camer a module. Aim and focu s the c amera . Remove test cable.[...]

- 11 - 10. On ce the c amera view is as desire d, attach the c over to outer base w ith t he captive hex h ead screws. Installation - Flush Mount 1. Paste the drilling template on the ceiling or wall. Please refer to the drilling template below . 2. Use the appropria te tool to drill the OUTER holes; carefully cut along the dash ed circle to create[...]

- 12 - 4. Remove dome cover (hex, captive screws) 5. U nscrew the 4 Philips screws (r etain for futur e use) to de tach the inn er base fro m the outer base. Set aside the outer ba se. 6. Scre w the 2 sp ring tabs in the or ientation sho wn to the slots a t both sides o f the inner base using the 4 Philips head screw s provided. Attach the screw s [...]

- 13 - 7. At tach pow er and video ca bles fro m sourc e to cable s from ca mera and pu sh e xcess wire back in to hole. Fold the spring tabs up. 8. Prepo sition camera so it is facing approximately in the desired direc tion. 9. Push the entire inner base into ceiling while holdin g the spring tabs with both hands.[...]

- 14 - 10. The spring tabs will open automatically to support the camera ag ainst the ceiling. 1 1. U se the long Phill ips p an hea d s crews (x4) p rovided to screw the b ase to the ceiling. Do N OT use washers.[...]

- 15 - 12. Attach video test cable t o test p oint o n rear of came ra module. Aim and focus the c amera. Remove test cable. 13. Screw the cover back to the base with captive hex head screws. 4. OSD Menu & Configuration Access the user setup menu scr een: I. Pres s inward on the end of the joystick The menu screen will app ear on the monitor . [...]

- 16 - Menu T ree[...]

- 17 - Press Set but ton to ente r SETUP Menu. In SETUP menu, use t he joystick to ma ke settings. User can do camera settings including Exposure, White balance, D ay/Night, Special and Image adjust. Please s elect the item by moving t he joystick UP or DOWN the n press SET to enter the set tings. Move the joystick to the last option which is “Re[...]

- 18 - 4.1.2 Shutter Select the shutter mode by moving the joystick LEFT or R IGHT . Select from Auto,1/50,1/60, 1/100,1/120,1/250,1/500 ,1/700,1/1000,1/160 0,1/2500,1/5000 and 1/8000 . 4.1.3 AGC (Auto Gain Cont rol – basic low light signal amp lification) Select the le vel you would l ike to choo se by mov ing the joystick LEFT o r R IGHT . The [...]

- 19 - Select “Return ” to return to the pre vious menu. 4.3 Day/Night These settings control the operation of the camera when t h e illumination le vel changes. Choices ar e Color at all times; B/W at all times ; or color when illumination is bright, switching to B/W in low light. Please se lect one o f the 3 modes below by movin g the joy sti[...]

- 20 - 4.4.3 D-Effec t In this se ction, user can do camer a s ettings including Mir ror , Gamma a nd Neg_Image. P lease select the item by moving the joys tick UP or DOWN. Select “Return” to return to the previous menu. 4.4.3.1 Mirror Select one of the 4 mode s below by moving the joystick LEFT or RIGHT . -Off: Disable the effec ts. -H-MIR: Se[...]

- 21 - 4.4.6 Default Select “Y es” to load system settings to default factory value s. Or select “No” to disregard this option . 4.5 Image Adjust In this section, user can adjust Sharpness, Brigh tness and Contrast of the image. Please selec t the item by moving the joystick UP or DOWN . Select “Return” to return to the previous menu. 4[...]

- 22 - EverFocu s Electronics Corp. EverFocus T aiwa n: 12F , No.79, Sec. 1, Shin- T ai Wu Road, Hsi-Chih, T aipei, T aiwan TEL: +886 2 2698 2334 F AX: +886 2 26 98 2380 www .everfocus.com.tw marke ting@everfocus.com.tw EverFocus E urope - Germany: Albert-Einstein-Strasse 1, D-4644 6 Emmerich, Ger many TEL: +49 2822 9394 0 F AX: +49 2822 939495 www[...]