EverFocus EDSR-1600 инструкция обслуживания

INSTRUCTION MANUAL EDSR - 900 9 Channel Duplex Digital Video Recorder V1.09 EDSR - 1600 16 Channel Duplex Digital Video Recorder[...]

Refer all work related to the installation of this product to qu alified service personnel or system installers. Do not block the ventilation opening or slots on the cover. Do not drop metallic parts through slots.This could permanently damage the appliance. Turn the power off immediately and contact q ualified service personnel for service. Do not[...]

The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance(servicing)instructions in the literature accompanying the appliance. Safety Precautions Warning : To prevent fire or shock hazard, do not expose units not specifically designed for outdoor use to rain or moisture. Th[...]

Important Safeguards Read Instruction --- All the safety and operating instructions should be read before the init is operated Retain Instructions --- The safety and operating instructions should be retained for fut ure reference. Heed Warnings — All warnings on the unit and in the operating instructions shoul d be adhered to. Follow Instructions[...]

Table of Contents 1. Product Overview …………………………………… . ……………… .. … .. … .. ............ Page 1 1.1 Main features ………………………………………………………………… ..... … .. ……… 1 1.2 Specifications ……………………………………………………………… [...]

1. Product Overview The EDSR - 900 / EDSR1600 Duplex Digital Video Recorder (DVR) a full - featured DVR designed specifically for use in security industry. The DVR incorporates all the benefits of digital video recording , is simple to install, and operates just like a VCR. Highly efficient compression technology and superior resolution of recorded[...]

Specifications 2 1.2 Specifications 9 ( EDSR900) / 16 (EDSR1600) camera inputs (BNC),1Vp - p/75ohm 430 mm (W) x 88mm (H) x 300 (D) Dimension AC100~240V Power Source 40 W max. Power Consumption Video Input M - JPEG Video Compression 0 ° C ~ 40 ° C Environ. Temperature 2 x RJ45 Socket RS485 9 - pin female D - Sub RS - 232 Yes Watch Dog Timer Built [...]

Back Panel Connections 2. Back Panel Connections 1 ON/OFF: Main on/off switch. 2 AC100~240V power socket . 3 VIDEO IN: BNC - sockets for composite signal video inputs, automatic 75 Ohm termination (EDSR - 900: 1 ~ 9, EDSR - 1600: 1 ~ 16). 4 VIDEO OUT: Loop through video outputs for each input channel. (EDSR - 900: 1 ~ 9, EDSR - 1600: 1 ~ 16) Matrix[...]

4 10 ALM - OUTPUT : Two - way contact relay alarm output. In normal condition, this N.C. c ontact shorted to ALM - COM. In alarm status, it is open between ALM - NC and ALM - COM, N.O. is shorted to ALM - COM. ALM - INPUT : Normally Open (N.O) or Normally Close (N.C) type alarm sensor in put. The Alarm Input can be selected as N.O or N.C input in t[...]

System Connection 5 3. System Connection The installations described below should be made by qualified service personnel or system installers. Before Installation Please refer to the following diagram for the system connections . Matrix Outputs 4 CALL Monitors (Optional) EDSR 900: Camera 1~9 / EDSR - 1600: Camera 1 ~ 16 ~ CALL Monitor Audio Input ([...]

Front Panel Keypads 4. Front Panel Keypads SHUTTLE : In Playback mode, turn the shuttle ring to fast forward/rewind the picture (600X maximum). In Pause mode, turn the shuttle dial to slo w forward/rewind the picture (1/32 maximum). JOG : In Pause mode, turn the jog dial to step forward/rewind the Pict ure. In Menu mode turn the jog dial to select [...]

LEDs: LEDs for HDD1, HDD2 , ALARM and LAN access (from left to right) . IR Remote Controller receiver 7 Display: Press this key to switch ON/OFF for camera title, date/time and HDD status. Hold this key longer than 2 seconds for displayin g the event log list. 9 10 Compact Flash Card Slot: Insert a Compact Flash Card for archiving video. Hard Disk [...]

Operation 8 (1) Insert a HDD (IDE) for Video Storage (2) Connect cable for video/audio input and video/audio out, The detail connection is described in SYSTEM CONNECTION . (3) Switch Power On (4) Press MENU key to enter SET UP MENU. Once inside the main menu you will find there are 17 set up page s as below: Selected item will be surrounded by a wh[...]

MENU flow 6. MENU FLOW CLOCK ( See page 11 ) : 2005/04/15 FRI : 13:01:02 CLOCK SETTING MENU DATE TIME MENU LANGUAGE: ENGLISH VIDEO SYSTEM: NTSC VERSION: 1.09 2005/01/20 TIMER SETTING MENU WEEK START STOP SPEED SET SUN 00:00 23:59 60 IPS OFF SUN 00:00 23:59 60 IPS OFF SUN 00:00 23:59 60 IPS OFF SUN 00:00 23:59 60 IPS OFF SUN 00:00 23:59 60 IPS OFF T[...]

CONTROL ( See page 24) CONTROL SETTING MENU BAUD RATE STOP BIT PARITY DATA BIT BAUD RATE STOP BIT PARITY DATA BIT RS232/RS485 ID : 9600 BPS : 1 : NONE : 8 : 9600 BPS : 1 : NONE : 8 : 1 BUZZER ( See page 25 ) BUZZER SETTING MENU BUZZER : ENABLE RECORD - IN : ON ALARM - IN : ON MOTION - IN : ON DISK FULL : ON VIDEO LOSS: ON TIMER : ON ARCHIVE ( See p[...]

MENU 11 In CLOCK/LANGUAGE SETTING MENU , we define: (1) DATE : Current date, format: YYYY/MM/DD Year: 2000 ~ 2099, Month: 01~ 12, Date: 01~31, Week: Sunday~Saturday (2) TIME : Current time, format: HH:MM:SS Hour: 00 ~ 23, Minute : 00 ~ 59, Second: 00 ~ 59 (3) MENU LANGUAGE: ENGLISH (4) VIDEO SYSTEM : Factory default setting depend on machine “ NT[...]

MENU 12 This menu provides automatically switching to Daylight Saving Ti me and back to Normal Time. Standard start and end times in Middle Europe: Last Sunday in March - change from 02:00 + 1 hour Last Sunday in October - change from 03:00 - 1 hour Settings: START TIME: Set date and time for switching from Normal to Daylight Saving T ime END TIME:[...]

MENU 6.3 TIMER SETTING MENU 13 Timer records can be defined for 16 individual start and end tim es. (1) WEEK: Select the week day for the timer to record on schedule. DLY means daily record. (2) START: Enter the start time for timer recording. (3) STOP: Enter the end time for timer recording. NOTE: The recorder records until the end of the minute w[...]

MENU (1) CH (Channel): Input channels. 1~9 for EDSR - 900, 1~16 for EDSR - 1600. (2) OP (Operation): ON includes the camera in the sequence, OFF skips the camera in the sequence. (3) DWELL (DWELL TIME) : Dwell Time is individually adjustable for each channel. The dwel ling time for the sequencer can be set between 0 - 99 seconds. Note: Sequences fo[...]

MENU 15 6.5 TITLE SETTING MENU In the TITLE SETTING MENU we define: The Title Setting Menu allows you to assign a title to each came ra input. Title with up to 12 characters is supported for each channel. The available alphanumeric characters are: 0,1,2,3,4,5,6,7,8,9, A,B,C,D, … X,Y,Z. ( ) . , + - / “ space ” Default setting is CH01~CH09 for [...]

6.6 COVERT SETTING MENU COVERT SETTING MENU CH OP 1 OFF 2 OFF 3 OFF 4 OFF 5 OFF 6 OFF 7 OFF 8 OFF 9 OFF 10 OFF 11 OFF 12 OFF 13 OFF 14 OFF 15 OFF 16 OFF In the COVERT SETTING MENU we define: The covert setting menu allows you to hide the requested camera on the display in a blue background. Change setting to “ ON ” for covering camera. Camera i[...]

In ALARM RECORDING MENU, we define (1) CH (Alarm input) : Select alarm input or RST for alarm reset input. (2) OP (OPERATION) : ON : Records when alarm occurs. OFF : No reaction when alarm occurs. (3) TYPE : Select alarm type: N.C. : Normally Closed with time out function counting from alarm start (set in DURATION) N.C. + TRANS : Normal Closed, ala[...]

MENU (1) CH (Channel): video input channel (2) OP (Operation): Default: OFF ON: The device will respond recording when motion occurs. OFF: The device will not respond recording when motion occurs . (3) SEN (Sensitivity): HIGH, MIDDLE or LOW adjustable. Default: MIDDLE. (4) DURATION: Duration time for motion record and Alarm Out relay. 0~99 seconds [...]

MENU (5) HIT 1 - 9/16 TO MANUAL EDIT: Use the number keys (1~9 for EDSR - 900 / 1~16 for EDSR - 1600) to select a camera for setting the detection areas. The selected camera appears with a 16 x 12 grid (detection zones ): PRESS MODE TO SWITCH ALL ON/OFF PRESS ENTER TO SELECT NODE USE JOG TO TOGGLE ON/OFF HIT MENU TO EXIT MODE switches all detection[...]

MENU 20 In NORMAL RECORDING MENU we define (1) NORMAL RECORD: SPEED : Choose the normal recording speed. Maximum 60 (NTSC) / 50 (PAL) . QUALITY: Define the video picture ’ s quality by selecting a compression rate. There are six quality levels for recording LOWER : 15 KB LOW : 19 KB BASIC : 23 KB STANDARD : 27 KB HIGH : 31 KB SUPERIOR : 35 KB DIS[...]

MENU 21 (3) PRE - ALARM RECORD: (with Alarm In and Motion) Pre - alarm duration is depending on recording quality (about 8 - 15 seconds). OP (Operation): Select ON to activate or OFF to deactivate pre - alarm recording. (4) PERMANENT RECORDING: This recording mode is used for continuous recording in the qual ity of NORMAL RECORD settings. Permanent[...]

6.10 NETWORK SETTING MENU IP ADDRESS NET MASK ADDRESS GATEWAY ADDRESS MAC ADDRESS USER - NAME PASSWORD LEVEL NETWORK SETTING MENU : 192.168.010.005 : 255.255.255.000 : 192.168.010.001 : 00:5 A:56:A3:87:1A GUEST --- GUEST --- GUEST --- GENERAL - GENERAL - GENERAL - ADMNI --- ADMNI --- ADMNI --- HTTP PORT: 0080 CTRL PORT: 6666 DATA PORT: 1111 2222 33[...]

23 MENU Turn the JOG dial clockwise or counter - clockwise to select the options. Press MENU key to return to Main Menu, press again to leave Set up Menu. MENU Press ENTER key to confirm the option and move to next column. ENTER The Login name and password are used to establish a network conn ection to the unit. The PASSWORD setup allows the admini[...]

MENU (1) RS232 BAUD RATE: There are 6 different speeds that can be used to transmit inst ruction or information through the RS232 port on the device, 1200 baud,2400 baud,4800 baud,9600 baud, 19200 baud,and 38400 baud. The default setting from the factory is 9600 baud. (2) RS232 STOP BIT: Select stop bit: 1 or 2 (3) RS232 PARITY: Select parity mode:[...]

In BUZZER SETTING MENU, we define the buzzer ON/OFF for follow ing event: RECORD - IN, ALARM - IN, MOTION - IN, DISK FULL, VIDEO LOSS AND TIMER. Please select ON or OFF MENU 25 6.12 BUZZER SETTING MENU BUZZER SETTING MENU BUZZER : ENABLE RECORD - IN : ON ALARM - IN : ON MOTION - IN : ON DISK FULL : ON VIDEO LOSS : ON TIMER : ON Turn the JOG dial cl[...]

MENU 6.13 ARCHIVE SETTING MENU (1) PICTURE SIZE : Selects picture size for copying image to CF card: Big size:720x480 / 720x576 for NTSC / PAL. Small size:352x240 / 352x288 for NTSC / PAL. (2) TIME STAMP : ON : Shows the time stamp on the picture when copying image to CF c ard. OFF : This erases the time stamp on the picture when copying image t o [...]

6.14 MATRIX SETTING MENU 27 CH DWELL EVENT 1 07 SECS NONE 2 07 SECS NONE 3 07 SECS NONE 4 07 SECS NONE 5 07 SECS NONE 6 07 SECS NONE 7 07 SECS NONE 8 07 SECS NONE 9 07 SECS NONE ………… MONITOR - 0 SETTING MENU In the MATRIX SETTING MENU, we define the standard sequences for each matrix monitor and event, which override these sequences. Users [...]

MENU 6.15 DISK MENU DISK SETTING MENU DISK USAGE HDD - 1 HDD - 2 SIZE (GB) 120 120 RECORD POS *78,2% 0% PLAY POS *39,5% 0% DISK RENEW NO NO In the DISK menu, the Hard Disks ’ capacity and status are displayed. Additionally, the Hard Disks ’ indexes can be deleted. SIZE (GB): Display of Hard Disk capacity in GB for HDD1 (upper Slot) and HD D2 (l[...]

MENU 29 6.16 PTZ SETTING MENU The EDSR600/900/1600 Recorder from FW 1.09 provides telemetry c ontrol over network. Local device telemetry control at the EDSR recorder is not possi ble. Telemetry bus may be connected to RS - 232 or RS - 485. In the PTZ SETTING MENU , we define PTZ ENABLE: ON activates telemetry function / OFF disable telemetry funct[...]

MENU 30 1 2 3 4 5 6 7 8 ON OFF ON OFF 1 2 3 4 5 6 7 8 SW501 Example: Connection ED - 2250 Dome to EDSR600/900/1600 Control of EverFocus ED2250 speed dome is possible with setting PELCO - D or PELCO - P protocol. Functionality is limited compared to keyboard control with origi nal protocol, available are PTZ and preset functions (no ED2250 setup men[...]

MENU 31 RS - 232 - Connection ED2250 Dome[...]

MENU 32 6.17 SYSTEM SETTING MENU (1) PLAY WITH AUDIO: AUDIO - 1, AUDIO - 2 ON/OFF: Playback with or without audio. (2) PLAY SPEED: Set the playback speed. Maximum 60 (NTSC) / 50 (PAL). (3) PASSWORD ENABLE: Enable/Disable the password protection. (4) PASSWORD LEVEL 2: Set password with 6 digits, default setting: 222222 (5) PASSWORD LEVEL 3: Set pass[...]

7.1 INSTANT RECORDING Press REC key to start continuous recording with setting of “ NORMAL RECORD ” . The recording rate and recording quality are set in the RECORD S ETTING MENU. The LCD screen on the front panel of DVR will display as follows : Recording REC Press STOP key to stop recording. Since the DVR had Duplex feature, STOP key can be a[...]

Recording 7.3 PERMANENT RECORDING No manual operation is required, the automatic permanent recordi ng is defined and activated in the RECORD menu. 7.4 TIMER RECORDING No manual operation is required, the settings for TIMER recordin g is defined in the TIMER menu. 34[...]

8.1 NORMAL PLAYBACK Press the PLAY key to start playing back the stored video/audio from the last SEGMENT. (1) Playback (2) Fast Forward/Reverse Playback During playing back, turn the SHUTTLE ring clockwise to start fast forward playing back. The speed will be shown on the screen at the bottom of the scree n. >> 2X, 4X, 8X, 16X, 32X, 600X Tur[...]

8.2 SEARCH PLAYBACK Press SEARCH key to enter the SEARCH MENU dialog. Search Playback SEARCH 36 SEGMENT SEARCH 0001 A01 0002 M02 0003 M03 2005/04 /24 19:03:29 HDD1 2005/04/25 12;30:30 HDD1 2005/04/27 12:00:00 HDD2 SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Turn the JOG dial to select BY SEGMENT LIST and press ENTER key. A segment is a r[...]

(2) Alarm List search playback 37 A01 : Alarm recording by Alarm - in 1. M03: Motion recording by camera 3. T : Timer recording. PL: automatic record restart after end of power loss : to next page : to previous page. Notice: Shuttle can change whole page. Press SEARCH key to enter the SEARCH MENU dialog. SEARCH SEARCH MENU BY SEGMENT LIST BY ALARM [...]

(3) Date/Time Search Playback DATE/TIME SEARCH YYYY/MM/DD HH:MM:SS HDD 2003 /01 /01 21: 33: 26 1 PRESS SEARCH TO START SEARCH PRESS MENU TO EXIT 38 Notice: If there is no image stored in the date/time specified then the machine will start playing back from the nearest set time automatically. Press SEARCH key to enter the SEARCH MENU dialog. SEARCH [...]

DATA EXPORT Insert a Compact Flash card into the Compact Flash slot on the f ront panel of DVR. When inserting the Compact Flash card, make sure that insert dir ection is correct. NOTE: COPY function will interrupt the recording for the duration of copy procedure. The MAIN monitor displays the message: "WARNING: RECORD STOPS FOR COPY FUNCTION [...]

COPY Press COPY key and then the copy menu and instruction appears. The main monitor switches to full screen display with following OSD: 40 Press the PLAY key to start playing back. PLAY 9.2 COPY TO MOVIE FILE CH01 COPY TO MOVIE FILE USE JOG TO SELECT PICTURE PRESS COPY TO START COPY PRESS PAUSE TO PAUSE COPY PRESS STOP TO CLOSE FILE PRESS MENU TO [...]

9.3 EXPORT EVENT LOG LIST DATA EXPORT This function allows to export the event log list to CompactFlas h – Card. The generated text file in in *.txt format. DISPLAY Press „ DISPLAY “ key and hold the key for over 2 seconds. EVENT LOG TYPE ID TIME MOTION 2 2004/01/02 12:12:54 VL 1 2004/01/02 12:12:54 VL 3 2003/12/29 12:12:54 VL 1 2003/12/28 12[...]

MONITOR VIEWS / OPERATION 10. MONITOR VIEWS / OPERATION 10.1. MAIN MONITOR The EDSR900/1600 digital recorders provide 1 main monitor and 5 matrix monitors (include 1 call monitor). These monitors have different functionalities: Main monitor: - Full screen and multi screen display: EDSR - 900: Full, 4, 6, 7, 8, 9, PIP, and 2x zoom EDSR - 1600: Full,[...]

Press CALL to change settings for CALL / MATRIX monitors. The Main monitor shows following dialogue: MONITOR VIEWS / OPERATION 10.2. CALL / MATRIX MONITORS 43 CALL MATRIX NORMAL STATE SETTING MENU PRESS CALL TO SET CALL MONITOR PRESS 1 - 4 TO SELECT MATRIX Select the monitor by pressing CALL or the numeric keys 1~4. The Main monitor shows following[...]

RJ45 (RS - 485) pin assignment 11. REMOTE CONTROL 11.1 RS - 485 REMOTE CONTROL The new standard EverFocus EDSR remote control protocol allows s ophisticated installations with DVR remote control at different installation sites. EDSR remote control is supported by the keyboards KS KBJ (with 3 - axis joystick and 2 additional RS - 485 ports for telem[...]

REMOTE CONTROL / OPERATION Wiring diagram single EDSR control Wiring diagram multiple EDSR control Wiring diagram multiple keyboard control RS485B /yellow RS485B /black RS485A /yellow RS485A /white RS485A /white RS485A /white RS485B /yellow RS485B /yellow RS485B /yellow RS485A /white RS485A /white RS485B /yellow RS485B /black RS485B /black RS485B /[...]

IR REMOTE CONTROLLER / OPERATION The remote controller (RC - 200, Figure 1) is an accessory to enhance the handy operations o f the DVR. You can perform all the settings and operations by the rem ote controller. The effective distance is up to 10 meters without any obstacle. The keypad fun ctions are same as the front panel key button of the DVR. T[...]

12. View From Internet/Intranet Basic Operations and Login Display: Before you start: Please make sure the service ports 0080, 1111, 2222, 3333, 4444, and 6666 all enable in both of two end point and LAN(control PC and been cont rolled DVR). Please enable the “ ActiveX ” for java plug - in (Please refer to Microsoft IE manual ). Please set the [...]

Main Screen Above diagram is the main screen display. The icons on the lower corner of the screen are mainly for contr ol and Configuration, those on the right corner are for status indication. If any icon is grayed, it means that the specific function is no t accessible in the current mode. The followings are a brief description for each of the ic[...]

10. The system allows up to 3 ways playback video, by SEGMENT, ALARM LIST and DATE TIME . ( Playback by SEGMENT LIST, click Refresh to show segment list) ( Playback by Date time; please enter the date and time you like t o play) 49 ( Playback by ALARM LIST, click Refresh to show alarm list) View From Internet/Intranet[...]

11. All available segments are shown in the list. Click to select an d highlight. 12. Click to playback selected video segment. 13. Press this icon to show the segment or list. 14. Current connection and playback status is shown along with date and time. 15. Full screen view. 16. Quad screen view. 17. Nine split screen view. 18. Sixteen split scree[...]

MENU 51 PTZ - CONTROL WITH WEB BROWSER (from FW 1.09 only) If the checkbox "PTZ CONTROL" is activated in the Web ’ s applet of the EDSR600/900/1600, the screen shows the telemetry control functions. Please consider the time delay in video network transmission at manual PTZ control! PTZ network control is not recommended for ISDN or anal[...]

The EDSR 900/1600 provides 3 levels with different user rights i n operating, if password protection is activated in SYSTEM menu. USER RIGHTS: LEVEL 1: Active after start up, user is allowed to switch live views, no access to record, search, playback and menu functions. No password for this level. LEVEL 2: Access to record, playback, search functio[...]

Appendix - A LAN Functional Specification Specifications: Network Interface: 10Mbits/s Ethernet (10Base T) LAN controller Chip: RealTek 8019 LAN Connector: RJ - 45 Protocol: HTTP,TCP/IP.ICMP,ARP Remote Access: Standard browser such as inte rnet Explorer / Netsca pe with JAVA support Image Compression: JPEG Used Ports: 80, 1111, 2222, 3333, 4444, 66[...]

Appendix - B ? When Recording with 160GB HDD 54 Lower Low Basic Standard High Superior : 15 kB : 19 kB : 23 kB : 27 kB : 31 kB : 35 kB ( Estimated with typical image - low noise level) Time Lapse Mode Recording Time Table Reference:24H=1 day.168H=1 week, 720H=1 month,8760H=1 year NTSC Unit: Hour system storage(GB): 160 Recording Speed LOWER LOW BAS[...]

? When Recording with 320GB HDD Lower Low Basic Standard High Superior : 15 kB : 19 kB : 23 kB : 27 kB : 31 kB : 35 kB Appendix - B 55 ( Estimated with typical image - low noise level) Reference:24H=1 day.168H=1 week, 720H=1 month,8760H=1 year NTSC Unit: Hour system storage(GB): 320 Recording Speed LOWER LOW BASIC STANDARD HIGH SUPERIOR (fps) 15 19[...]

Appendix C: Serial Interface Specifications 2. Transmission setting PIN # NAME PIN # NAME 1 NOT CONNECTED 1 NOT CONNECTED 2 TXD 2 RXD 3 RXD 3 TXD 4 NOT CONNECTED 4 NOT CONNECTED 5 GROUND 5 GROUND 6 NOT CONNECTED 6 NOT CONNECTED 7 NOT CONNECTED 7 NOT CONNECTED 8 NOT CONNECTED 8 NOT CONNECTED 9 NOT CONNECTED 9 NOT CONNECTED DVR HOST 1 5 3 9 2 8 4 7 6[...]

3. Remote Control Protocol A computer or a terminal can be used to control the unit by send ing the packet as following. 57 1 - 1. Sample control code packets Example1 : A packet that send "REC" key to DVR (ID=5) 0x85 (length) 0x00 (Receiver ID high byte) 0x05 (Receiver ID low byte) 0x4B (OPcode = key ) 0x08 (DATA1 = "Rec" keyco[...]

58 2 - 1. The format of message packet is as follows: Length Byte (Prefix: 0x86, 0x87, or 0 x88 ..... ) Receiver ID high byte Receiver ID low byte Opcode Byte Data Byte1 Data Byte2 Data Byte3 Checksum Byte 2 - 2. Length Byte This Length Byte is also a prefix. Bit7 must be 1. EX: 0x87 ==> this packets has 7 bytes length. ( not include d Length by[...]

59 2 - 3. Receiver ID 2 - 3. Receiver ID 1). Individual receiver ID Decimal 14bit binary value Hbyte Lbyte Receiver ID (EDSR) 0 0000000 0000000 00 00 ID = 0 1 0000000 0000001 00 01 ID = 1 2 0000000 0000010 00 02 ID = 2 .... 126 0000000 1111110 00 7e ID = 126 127 0000000 1111111 00 7f ID = 127 128 0000001 0000000 01 00 ID = 128 129 0000001 0000001 0[...]

60 2 - 4. Opcode Byte & Data bytes 2 - 4 - 1. OPcode OPcode Data1 Function 0x4B Keycode A remote key pressed 0x4D command Matrix command 2 - 4 - 2. Remote keys (OPcode=0x4B) ---------------------------------------------------------------- ------------------------------------ Data1 Key Data1 Key 0x00 CH1 0x01 CH2 0x02 CH3 0x03 CH4 0x04 MODE 0x05[...]

2 - 4 - 3. Matrix command (OPcode=0x4D) Data1 Matrix function 0x00 Matrix monitor0 - ch01 spot 0x01 Matrix monitor0 - ch02 spot 0x02 Matrix monitor0 - ch03 spot 0x03 Matrix monitor0 - ch04 spot 0x04 Matrix monitor0 - ch05 spot 0x05 Matrix monitor0 - ch06 spot 0x06 Matrix monitor0 - ch07 spot 0x07 Matrix monitor0 - ch08 spot 0x08 Matrix monitor0 - c[...]

Appendix - D 62 Alarm I/O pin assignment T he alarm connector, Figure 1 , is used to provide one sensor alarm input for each camera inpu t. For easy operation, an alarm extension board, Figure 2 , is provided to connect to the alarm connector. Each alarm input requires two wires, one wire connects to the de sired alarm input pin, the second wire co[...]

EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin - Tai Wu Road, Hsi - Chih, Taipei, Taiwan www.everfocus.com.tw USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A. www.everfocus.com European Office: Albert - Einstein - Strasse 1 D - 46446 Emmerich, German www.everfocus.de China Office: Room 609, Technology Trade Building,[...]