EverFocus EQH5200 инструкция обслуживания

2 Megapixel Full HD-CCTV Camera Operation Instructions Model No. EQH5200 Please read this manual first for correct installation and operation. This manual sh ould be retained for future reference. The information in this manual was current when published. The manufac turer reserves the right to revise and improve its products. All specifications ar[...]

- 1 - T ABLE OF CONTENTS 1. PRODUCT OVER VIEW ............................................................................................................... 2 1.1 Main Features ............................................................................................................................................... 2 1.2 Package Contents .....[...]

- 2 - 1. PRODUCT OVERVIEW Deliver 2 megapixel full HD 1080i qua lity digital images over standard c oaxial cable with the EQH5200! Wire new megapixel systems with familiar and easy to install coax and BNC connectors, or reuse the existing coax cable infrastructure to effi ciently upgrade analog system s to megapixel digital performance without the [...]

1.3 Specifications Pickup Device 1/2.5" 2 megapixel CMOS sensor Sensitivity 0.02lux/F=1.2(AGC ON) S/N Ratio Greater than 50dB (AGC off) Video Format Main Output HD-SDI/HD-CCTV Resolution Main Output 1920x1080/2 Megapixel/1080i or 1280x 720/1 Megapixel/720p Video Mode Main Output Fi eld select 1080i or 720p Main Output Connector BNC-F Video For[...]

2. NAMES AND FUNCTIONS OF PARTS 2.1 Front panel Light Sensor T AKE CARE NOT TO OBSTRCUT THIS OPENING WITH THE BODY OF THE LENS! The light sensor is for optional control of D/N switching levels in some applications. See section 5.6 for details. 2.2 T op/Bottom Mounting Using the two phillips head screws provided, the mounting bracket may be mounted [...]

2.3 Back panel and connections ○ 1 ○ 2 ○ 3 ○ 6 - 5 - ○ 5 ○ 7 ○ 4 ○ 1 OSD Menu joystick: Use the joystick to move the cursor Upwards/Downwar ds. This is used to select the item to be set. T ilt t he stick to the right or left. This is used to select or adjust the parameters of the selected it em. Press in on the stick to enter the se[...]

○ 6 Power LED: The power LED lights up when power is ON. ○ 7 DC Auto Iris Lens Connector: This connector is used to connect with the DC type auto iris lens using a standard 4 pin male connector P i n 1 P i n 2 P i n 3 P i n 4 3 1 4 2 Direct Drive Cnt- Cnt+ Drv+ D r v - 3. INSTALLATION 1. Unscrew/remove the cover cap from the lens mount. 2. If C[...]

4. OSD Menu & Configuration Access the user setup menu screen: I. Press inward on the end of the joystick The menu screen will appear on the monitor . II. Navigating with the joystick Angle the joystick  or  t o m ov e t h e cu rs o r u p or down. Angle the joystick  or  to adjust the mode or value of a setting. III. Switching to su[...]

Menu T ree - 8 - Lens — Manual ; DC Shutter — Aut o ; 1/50 ; 1/60 ; 1/100 ; 1/ 120 ; 1/250 ; 1/500 ; 1/700 ; 1/1000 ; 1/1600 ; 1/2500 ; 1/50 00 ; 1/8000 Iris — 0.0EV ; +0.5EV ; +1.0EV ; +1.5EV ; +2.0EV ; -0.5EV ; Exposure -1.0EV ; -1.5EV ; -2.0EV AGC — High ; Middle ; Low ; Off BLC — On ; Off Anti-Flicker — Auto ; 50Hz ; 60Hz R e t u r [...]

- 9 - Neg_Image — On ; Off R e t u r n TV Out — NTSC ; PAL ; Return English G e r m a n R u s s i a n Language French S p a n i s h T r a d . C h i n e s e S i m p . C h i n e s e J a p a n e s e R e t u r n Default — Yes ; No R e t u r n Sharpness — 1~5 Image Adjust Brightness — 1~31 Contrast — 1~31 Return[...]

Press Set button to enter SETUP Menu. In SETUP menu, use the joystick to make settings. User can do camera settings including Exposure, White ba lance, Day/Night, Special and Image adjust. Please select the item by moving th e joystick UP or DOWN then press SET to enter the settings. Move the joystick to the last option which is “Return” to ret[...]

- 11 - 4.1.6 Anti-Flicker Selections are Auto, 50Hz and 60Hz. Camera will auto adj ust the shutter to reduce the flicker caused by fluorescent light when manual lens is used. 4.2 White Balance Control The screen color can be adjusted by us ing the White Balance function. Please select one of the 5 modes below by moving t he joystick UP or DOWN t he[...]

NOTE: AGC selection must be set as middle or high in order to employ the aut o switching function. 4.4 Special In this section, user can do special settings incl uding Resolution, Camera Title, D-Ef fect, TV -Out, Language and Default. Please select the item by movi ng the joystick UP or DOWN then press SET to enter the settings. Select “Return?[...]

- 13 - 4.4.3 .3 NEG_IMAGE Select Neg_Image On or Off by moving the joystick LEFT or RIGHT . Allows user to create a negative of the original image. A negative image is a tonal inversion of a positive image, in which light areas appear dark and vice versa. A negative color image is additionally color reversed , with red areas appearing cyan, greens [...]

Headquarter Office 12F , No.79 Sec.1 Shin-T ai Wu Road, Hsi-Chi, T aipei, T aiwan T el: +886-2-26982334 Fax: +886-2-26982380 Beijing office Room 609,T echnology T rade Building. Shangdi Information Industry Base, Haidian District,Beijing Chi na T el: +86-10-62971096 Fax: +86-10-62971423 European Office Albert-Einstein-S trasse 1, D-46446 Emmerich, [...]