Extron electronic DVI 104 Tx/Rx инструкция обслуживания

User ’s Guide Fiber Optic T ransmitter and Receiver DVI 104 Tx/Rx 68-1549-01 Rev . B 08 08[...]

Pr ecautions This symbol is intended to alert the user of important opera ting and mainte nance (servici ng) inst ruction s in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock. Caution Read[...]

安全须知 • 中文 这个符号提示用户该设备用户手册中 有重要的操作和维护说明。 这个符号警告用户该设备机壳内有暴 露的危险电压，有触电危险。 注意 阅读说明书 • 用户使用该设备前必须阅读并理 解所有安全和使用说明。 保存说明书 • 用户应保存安全说明[...]

[...]

DVI 104 Tx/Rx • User’ s Guide 1 Description The DVI 104 Tx and DVI 104 Rx are ber optic transmitter/ receiver units that extend DVI signals up to 1,640' (500 m) using four multi-mode ber optics cables. The transmitter plugs directly into the sour ce device and the receiver plugs dir ectly into the display device. The transmitter/rece[...]

DVI 104 Tx/Rx • User’ s Guide DVI 104 Tx/Rx, cont’d 2 Features Power Supply — Separate power supplies are pr ovided for both the transmitter and receiver . Power LEDs — The LEDs are on the top and bottom panels of both the receiver and transmitter . They illuminate blue when the unit is receiving power . No mounting hardware required — [...]

DVI 104 Tx/Rx • User’ s Guide 3 b LC Jacks — Four ber optic cables connect the transmitter to the receiver . The cables connect to the four female LC jacks in each of the units. A label on the top panel identies the unit as the transmitter or receiver and identies the ber optic port numbers and the power input. N For the transmitt[...]

DVI 104 Tx/Rx • User’ s Guide DVI 104 Tx/Rx, cont’d 4 Rear panel features Male Connector 13 68 17 19 22 24 9 3 c A single-link DVI-D male connector is used to connect the transmitter to the source and the r eceiver to the output device. Pin Signal Pin Signal Pin Signal 1 TMDS Data 2- 9 TMDS data 1- 17 TMDS data 0- 2 TMDS Data 2+ 10 TMDS data [...]

DVI 104 Tx/Rx • User’ s Guide 5 f Label — a label on the top panel identies the unit as the transmitter or receiver and also identies the ber optic port numbers and the power input. Bottom panel features The bottom panels of both the transmitter and receiver have a label that identies the unit’s serial number and a second power [...]

DVI 104 Tx/Rx • User’ s Guide DVI 104 Tx/Rx, cont’d 6 Setup and Operation By default, the transmitter/receiver pair ar e set to extend video signals with a resolution of 1600 x 1200 @ 60 Hz. For display devices that support this resolution and r efresh rate, pr oceed to step 7 . Otherwise, it is necessary for the transmitter to capture and st[...]

DVI 104 Tx/Rx • User’ s Guide 7 7 . Apply power to the receiver by inserting the cable fr om the external power supply into the input jack. The LED should illuminate a solid blue. 8. Ensure that the display device is still power ed on, connect the receiver dir ectly to the DVI input, and tighten the thumbscrews. 9. Ensure that the PC or sour ce[...]

DVI 104 Tx/Rx • User’ s Guide DVI 104 Tx/Rx, cont’d 8 T rouble Shooting Display does not show an image Ensure that all plugs and jacks used by the external power • supplies are rmly connected. If the cable is loose or slips out of the slot easily , move the release catch fr om its normal position above the locking catch, to the adjusted [...]

DVI 104 Tx/Rx • User’ s Guide 9 Screen is distorted or displays noise Ensure that the cable length does not exceed • 1,640' (500 m). Ensure • that the cables are high quality Multi Mode cable and are terminated with secur ely tting plugs. Ensure that the graphic r esolution is correctly set (see • “Setup and Operation”). V iew[...]

DVI 104 Tx/Rx • User’ s Guide DVI 104 Tx/Rx, cont’d 10 Specifications N The DVI 104 TX/RX consists of a transmitter (DVI 104 TX) and a receiver (DVI 104 RX) with fiber optic cables linking the two units. N These transceivers ar e Class 1 laser products. They meet the safety regulations of IEC-60825, F AD 21, CFR 1040.10, and FDA 21 CFR 1040[...]

DVI 104 Tx/Rx • User’ s Guide 11 Cooling ........................................... Convection, no vents Mounting Rack mount ........................ No Furniture mount ................ No Enclosure type .............................. Plastic Enclosure dimensions .................. 0.6" H x 1.5" W x 2.3" D (1.5 cm H x 3.9 cm W x[...]

DVI 104 Tx/Rx • User’ s Guide DVI 104 Tx/Rx, cont’d 12 Parts Included parts Included Parts Replacement part number DVI 104 Tx/Rx 60-977-01 (2) 5 VDC Power Supply DVI 104 Tx/Rx User ’ s Guide Fiber optic cables Accessories Part number 4-ber MM LC-LC - 10 m (32.8') 26-652-01 4-ber MM LC-LC - 20 m (65.6') 26-652-02 4-ber MM [...]

Extron’ s W arranty Extron Electr onics warrants this product against defects in materials and workmanship for a period of three years fr om the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electr onics will, at its option, repair or replace said pr o[...]

© 2008 Extron Electronics. All rights reserved. Ex tron US A - We st Headquar te rs + 80 0.6 33 .9 876 Inside U SA / Ca nada O nly +1 .7 1 4.4 91 .1 50 0 +1 .7 1 4.4 91 .1 51 7 FA X Ex tron US A - Eas t + 80 0.6 33 .9 876 Inside U S A / C anad a O nly +1 .9 19 .8 63 .1 79 4 +1 .9 19 .8 63 .1 79 7 FA X Ex tron Europ e + 800 .3 98 7. 66 73 Inside E [...]