Fine Digital 400 инструкция обслуживания

User’s Guide 2005[...]

003 F400 002 C O N T E N T S 1. INTRODUCTION 2. HOME SCREEN MENU 3. TECHNICAL SUPPORT 4. APPENDIX[...]

005 F400 004 driver and passenger seats. Make sure the windshield is clean and dry to ensure a tight grip. (1) When the suction on the vehicle mount is placed into position, (2) press and hold the center button while you firmly flip the latch down. This will lock the holder in place. 2. Connect the GPS Receiver Locate the input/output area on the b[...]

007 F400 006 the message and proceed by tapping the "OK" button. Finedrive 400 will power itself on and off each time your car is turned on and off. If the power plug in your car is always on, like in some recent SUV models, we recommend turning the navigation device off manually so that it doesn°Øt discharge your car battery. Each time[...]

009 F400 008 Navigation: Activates mapping applications and routing functions. MP3 Player: Activates the MP3 player and FM Transmitter functions. Setup: Configure the system settings of the device (brightness, volume, etc.) Shut Down: Turn device off manually. Note : If your Finedrive 400 is turned off while in use, the device will automatically re[...]

011 F400 010 2.2.2. Operating Navigation When you start the navigation system, a map will be displayed as shown below. If your GPS device receives a satellite signal, it will provide an expanded view of your current location. If you are not receiving a signal, the default map is shown. The varying colors of the vehicle icon indicate the number of s[...]

013 F400 012 2.2.4. The Main Menu 2.2.5. The Main Menu 1. To display a map in the Map View, tap the Menu button > Return to Map icon. The Map View Tap on the locator bar at the bottom of the map. Tap on the map location and select Info from the Pop Up menu. 2.2.3. Moving Around the Map Tap the pointer on the map and drag it in the direction you [...]

015 F400 014 2.2.7. Route Options Also accessible from the Main Menu, the Route Option enables you to use the navigation system in a number of different ways for determining your optimal route. “Method” allows you to choose how your route is determined: Quickest Route calculates a route with minimum travel time Shortest Route calculates a route[...]

017 F400 016 a dialog box with the location address displays, tap the Set Destination option. The Set Destination screen is shown: 2.2.10.1. Entering an Address 1. Tap Address on the Set Destination screen. The Input Method screen will appear. 2. Select an Input Method as follows: 2.2.8. Using the Navigation System 2.2.9. Entering a Start Location [...]

019 F400 018 6. Tap one of the following buttons at the bottom of the screen to proceed: Nav to calculate the route and center in on the map location. Fav to add this location to your list of favorite locations. Map to set this location as the starting route point for your trip. Tap Address First to enter a street address, including the house numbe[...]

021 F400 020 3. To select an entry, do one of the followings: Scroll through the list using the scroll keys at the right of the list. Tap characters using the keypad at the bottom of the screen. 4. Tap OK after each entry 5. Select your destination address from the list 6. Tap one of the following buttons at the bottom of the screen: Nav to calcula[...]

023 F400 022 2.2.10.4. Selecting an Alphabetical POI 1. Tap Alphabetical POI options on the screen. The Enter POI Name screen displays. 2. Select an entry, as follows: Scroll through the list by using the scroll keys at the right of the list. Tap in characters using the keypad on the screen. 3. Tap OK. The POI Select screen displays. 4. Tap one of [...]

025 F400 024 2. Select a city, as follows: Scroll through the list using the scroll keys at the right of the list. Tap in characters using the keypad at the bottom of the screen. 3. Tap OK. The Enter POI Name screen displays. 4. Select a POI as follows: Scroll through the list by using the scroll keys at the right of the list. Tap in characters usi[...]

027 F400 026 map location. Map to set this location as the starting route point for your destination. 2.2.10.8. Setting a Destination from the Recent Destinations List 1. Tap Recent on the Set destinations screen. The Recent Destinations screen displays. 2. Tap one of the following buttons at the bottom of the screen: Fav to add this location to yo[...]

029 F400 028 Nav to calculate the route and center in on the map location. Map to set this location as the starting route point for your destination. 2.2.10.9. Managing the Destination and Route The navigation system calculates the route after a destination is entered. To manage your destination and route, do one of the following: Tap the Menu butt[...]

031 F400 030 2. Tap on a Stopover Category. 3. Enter the Stopover information. 2.2.10.12. Clearing a Selected Destination To cancel a selected destination, do one of the following: 1. Tap on the Menu button > Destinations option. 2. Tap on the Clear button on the Destination Options screen. The screen displays in Map View mode. Refer to the Ente[...]

033 F400 032 Night Mode to set the screen color for nighttime driving conditions. If you receive a GPS signal, the navigation system will automatically switch between views at the appropriate time of day. 2.2.10.15. Viewing the Route List You can view the route instructions for your destination at anytime. To see route instructions, tap any street [...]

035 F400 034 2.3.1. Preparing MP3 Files for Y our Device 1. Copy MP3 files from your computer to a SD card. Note : We recommend first creating a mp3 folder on the SD Card, then copying all of the MP3 files into that folder. (Optional) 2. Inset the SD card into your device. 3. Power up the unit, then select MP3 Player mode. 4. The program will searc[...]

037 F400 036 2.3.2. MP3 Playback Control When you restart the MP3 Player, Play mode will return to its default settings. 2.3.3. Switching between Navigation and MP3 Player For your safety, the MP3 player functions and navigation functions cannot be operated simultaneously. If you choose to change the function either from navigation to MP3 player or[...]

039 F400 038 Tap the Exit Navigation icon at the right upper corner of the device. Insert a SD card that contains MP3 files into the SD card slot. Tap the OK icon on the Caution screen. Tap the MP3 Player icon on the Home screen. The Play list is displayed on the screen as soon as the MP3 Player reads files. Select MP3 to be played 2.3.3.2. How to [...]

041 F400 040 Park your vehicle at a safe place Select the Setting icon on the Home Screen Select the Volume & Backlight Adjust volume and brightness of the device as preference Tap the OK icon to store the adjusted values Note : T e rminate the Navigation before modifying the volume and backlight to avoid an error message. 2.4.2. Setting FM T r[...]

043 F400 042 Park your vehicle at a safe place free of obstructions Select the Setting on the Home Screen. Select the GPS Reset icon. Tap the GPS Reset icon. Allow up to 5 minutes for the Finedrive 400 to locate a GPS signal Contact Technical Support if your current position is repeatedly not detectable Note : If the GPS resetting is done while dri[...]

045 F400 044 Park the vehicle at a safe location Tap the Setting icon on the Home Screen. Select the Touch Calibration icon Follow the instructions on the screen Check the device after resetting the Touch calibration If your device still doesn°Øt perform properly, please contact our Technical Support. 2.4.5. Setting Language Option Select the mai[...]

047 F400 046 4.1. FCC Compliance The in-car GPS navigation complies with Part 15 of the FCC interference limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to provide more reasonable protection against harmful interference in a residential installation, and are more stringent than outdoor requirements. Operation of[...]

049 F400 048 result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. 4.2. System Specifications OS : Microsoft Windows CE.NET 4.2. CPU : Samsung ARM9-200MHz Main Memory : 64 MB NAND Flash : 128MB(64 MB available for MAP DB) SD card for external storage. GPS : Frequency[...]