Fisher & Paykel HC90 инструкция обслуживания

V entSur face User guide HC90 and HI120 models NZ A U GB IE[...]

[...]

1 Contents Introduction 3 Safety and warnings 4 Using your V entSur face 5 Care and cleaning 9 T roubleshooting 12 W arranty and ser vice 13 Impor tant! SA VE THESE INSTRUCTIONS The models shown in this user guide may not be available in all markets and ar e subject to change at any time. F or current details about model and specification availabil[...]

[...]

3 Introducing your V entSur face Congratulations on your new pur chase. Y our F isher & Paykel VentSurface is the ultimate in extractor hoods, giving you different modes and extraction speeds to suit your changing needs . Y our VentSurface can also operate and turn off automatically and alerts you when it needs cleaning. Before using y our V en[...]

4 Safety and warnings W ARNING! Hot Sur face Hazard Make sure the elements or gas burners of the cooking surface always ha ve pans/pots on them and never heat the filter(s) of y our appliance directly . When frying, never leav e pans unattended as there is a risk of the oil overhea ting and catching fire . If reusing frying oil, the risk of fire is[...]

5 Using y our V entSur face 1 23 4 5 6 1 F an on/off (Stand-by) 2 Decreases fan speed 3 Mode, speed and cleaning alert display 4 Increases fan speed 5 Timer 6 Lamps on/off Using your V entSur face for the first time or after a long holiday 1 Make sure your cooker or cookt op is turned off and there are no draughts in the r oom. 2 Make sure your Ven[...]

6 Using y our V entSur face Choosing between normal and high pow er modes These two modes give y ou flexibilit y and optimum V entSur face performance to suit your changing cooking activities. Use normal mode for everyday cooking purposes, and high mode during longer periods of intensive cooking (eg holidays or family gatherings) f or more pow er f[...]

7 Using y our V entSur face Using your V entSur face in automatic mode When the VentSurface is in automatic mode, its sensor will automatically turn the fan on, adjust its speed and turn the fan off as needed. T o illuminate your cooking area, press the button. Note: your VentSurface will revert to the default manual mode setting whenever you pr es[...]

8 Using the timer (in manual mode only) When the timer is activated the VentSurface will run for 10 minutes and then turn off automatically . the selected fan speed will flash in the display while the timer is counting down. T o ac tivate the timer 1 Select a fan speed bet ween “1” and “5” . 2 Press the button briefly , until you hear a sho[...]

9 Car e and cleaning Impor tant! Always disc onnect the appliance from the mains electricity supply before carr ying out any servicing or maintenance. F ailure to do so may result in death or elec trical shock. Do not let grease deposits accumulate on your V entSur face, as these c ould create a fire hazard. Do not use harsh/abrasive cleaners, sc o[...]

10 T o replace the carbon filter 1 Stop/reset the carbon filter alert signal. I f “C” is flashing in the display alternately with the fan speed setting , turn the V entSur face off by pressing the button, then pr ess the and buttons simultaneously and hold do wn for five sec onds until you hear a beep . “8” will show in the display until th[...]

11 Car e and cleaning Cleaning the stainless steel surfaces Do not use abrasive cleaners, cloths or pads to clean y our V entSur face. Wipe the stainless steel sur faces often, using warm water and a mild household detergent. The stainless steel may also be cleaned with a suitable cleaner and polish. Note: if you choose to use a c ommercial stainle[...]

12 T roubleshooting T roubleshooting chart Problem Cause What to do “ A “ flashing alternately with the fan speed setting. The aluminium mesh filter needs cleaning (automatic alert). Clean the aluminium mesh filter following the instructions in ‘ Care and cleaning ’ . “ C ” flashing alternately with the fan speed setting. The carbon fil[...]

13 W arranty and ser vice Manufacturer ’ s warranty When you purchase an y new Fisher & P aykel rangehood you automatically rec eive a two year Manufacturer ’ s Warranty covering parts and labour for servicing. Fisher & P aykel undertakes to Repair or , at its option, replace without cost to the owner either f or material or labour any [...]

14 W arranty and ser vice Customer car e Check the things you can do yourself . Refer to your U ser Guide and check: 1 y our appliance is correctly installed 2 y ou are familiar with its normal operation If after check ing these points you still need assistance please ref er to the following: In New Zealand If you need assistance call ...* Call you[...]

15 W arranty and ser vice Product details F isher & P aykel Ltd Model Serial No. Date of Pur chase Purchaser Dealer Suburb T own Country[...]

[...]

[...]

Copyright © F isher & Paykel 2009. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at an y time. Y ou should therefore check with your Dealer to ensure this booklet correc[...]