Fisher PLC-XP46 инструкция обслуживания

Owner’ s Man ual PLC-XP46 Multimedia Pr ojector MODEL PLC-XP46L (Lensless)[...]

2[...]

3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions [...]

4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the pl[...]

5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER MODE 22 VIDEO MODE 30 SETTING 35 APPENDIX 37 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 POSITIONING PROJECTOR 9 LENS INSTALLATION 9 ADJUSTABLE FEET 10 MOVING PROJECTOR 10 CONNECTING PR OJECT OR 11 TERMINALS OF PROJECTOR [...]

6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and comput[...]

7 PREP ARA TION[...]

NO TE ON PO WER CORD AC Power Cord must meet requirement of country where you use a projector. Confirm an AC plug type with chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. SETTING-UP PR OJECT OR 8 PREP ARA TION To POWER CORD CONNECTOR on your projector. Pr ojecto[...]

9 PREP ARA TION POSITIONING PR OJECT OR ● This projector is designed to project on a flat projection surface. ● Projector can be focused from 4.6 ’ (1.4m) ~ 48.3 ’ (14.7m). ● Refer to figure below to adjust screen size. Screen Size Distance 40 ” 31 ” 4.6 ’ (1.4m) 40 ” 4.6 ’ (1.4m) 11.8 ’ (3.6m) 24.0 ’ (7.3m) 36.1 ’ (11.0m)[...]

10 PREP ARA TION CA UTION IN CARR YING OR TRANSPOR TING A PROJECT OR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a proj[...]

S – VIDEO R – AUD IO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK G B R H/V V ( MONO ) 11 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal comput[...]

[...]

13 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQ UIPMENT S – VIDEO R – AUDIO – L VIDEO/Y Cb/Pb Cr/Pr VIDEO/Y Cb/Pb Cr/Pr RESET CONTROL PORT USB AUDIO 1 AUDIO 2 ANALOG DIGIT AL(DVI-D) INPUT 1 INPUT 2 INPUT 3 R/C JACK G B R H/V V ( MONO ) Video Source (example) Video Cassette Recorder Video Disc Player S-VIDEO Cable ✽ Terminals of a Projecto[...]

14 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM D.ZOOM MENU MUTE LASER KEYST ONE NO SHO W FREEZE A UT O PC ADJ. IMA GE P-TIMER LOCK INPUT LENS SHIFT OPERA TION OF REMO TE CONTR OL ON ALL OFF ALL-OFF SWITCH Left Side When using Remote Control Unit, turn this switch to “ ON. ” And turn it to “ ALL OFF ” when it is not used. This Remote Control[...]

15 BEFORE OPERA TION To insure safe operation, please observe following precautions : ●[...]

16 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS Used to open or close MENU operation. (P17, 18) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAMP INDICATOR POINT (VOLUME + / – ) BUTTONS LAMP REPLACE INDICATOR Used to select image level. (P27, 32) Lights green when a proje[...]

17 HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT RIGHT / LEFT buttons. Adjust ITEM DATA by pressing POINT RIGHT / LEFT buttons. Refer to followin[...]

18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22, 23) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / White Balance (R/G/B) / Gamma] (Refer to P28) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35,-37) SOUND MENU Used to adjust volume [...]

19 BEFORE OPERA TION TURNING ON PR OJECT OR Connect a projector's AC Power Cord into an AC outlet. LAMP Indicator lights RED, and READY Indicator lights GREEN. Press POWER ON-OFF button on Top Control or on Remote Control Unit to ON. LAMP Indicator dims, and Cooling Fans start to operate. Preparation Display appears on a screen and count-down [...]

20 B ASIC OPERA TION ADJUSTING SCREEN Message disappears after 4 seconds. Message disappears after 4 seconds. Zoom Focus ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM ▲ / ▼ button on Remote Control Unit. Message “ Zoom ” is displayed. 2 Press ZOOM ▲ button or POINT UP button to make image larger, and press ZO[...]

21 B ASIC OPERA TION Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button except POINT / SELECT / RIGHT CLICK / LASER button. Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press NO SHOW button again or press any [...]

22 COMPUTER INPUT SELECTING INPUT SOURCE DIRECT OPERA TION Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). INPUT button Input 1 Input 2 Input 3 Press MENU button and ON-SCREEN MENU will appear. Press POINT L[...]

23 COMPUTER INPUT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “ COMPATIBLE COMPUTER SPECIFICATION ” on page 26). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting [...]

24 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a p[...]

25 COMPUTER INPUT NOTE : Display area (H/V) and Full screen cannot be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected on PC SYSTEM Menu (P23). Selects area displayed with this projector. Select resolution at Display area dialog box. Display area Adjustment of horizontal area displayed with this projector. Press POINT LEFT/RIG[...]

26 COMPUTER INPUT COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less than 160 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 40[...]

27 COMPUTER INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to level that you want to set and then press SELECT button. Move a red frame icon to le[...]

28 COMPUTER INPUT Press POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to previous figure. Reset Store Closes IMAGE MENU. Quit Other icons operates as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2[...]

29 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. When Digital zoom + is selected, ON-SCREEN MENU disappears and message[...]

30 VIDEO INPUT When video input signal is connected to Y-Pb/Cb- Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. Y,Pb/Cb,Pr/Cr SELECTING INPUT SOURCE Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. 1 Move a pointer to source and press SELECT button. Source Select Menu (VIDEO) Move [...]

31 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to AV SYSTEM Menu icon. Press POINT DOWN button to move a red arrow pointer to system that you want to select and then press SELECT butt[...]

32 VIDEO INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to level that you want to set and then press SELECT button. Move red frame pointer to leve[...]

33 VIDEO INPUT Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed[...]

34 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. Press POINT DOWN button and move a red frame pointer to function that you[...]

35 SETTING Ceiling When this function is “ On, ” picture is top / bottom and left / right reversed. This function is used to project image from a ceiling mounted projector. Rear When this function is “ On, ” picture is left / right reversed. This function is used to project image to a rear projection screen. Ceiling function Rear function K[...]

36 SETTING Remote control This projector has two different remote control codes; factory-set normal code (Code 1) and secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together. When operating projector in “ Code 2, ” both projector and Remote Co[...]

37 SETTING/APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most Personal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation. This Wireless Mouse function is available only when PC mouse pointer is displ[...]

38 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When a projector is not in use, replace Lens Cover. 1 3 Lightly wipe a cleaning cloth over Projection Lens. 2 Follow t[...]

39 APPENDIX LAMP REPLA CEMENT When life of Projection Lamp of this projector draws to an end, LAMP REPLACEMENT indicator lights yellow. When a projected image becomes dark or color of an image becomes unnatural, replacement of Projection Lamp is required. Turn off a projector and disconnect AC plug. Allow a projector to cool for at least 45 minutes[...]

40 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 11 ~ 13. 2. Check cable connection. Verify that all computer, video and power cor[...]

41 APPENDIX Remote Control Unit does not work. ● Check batteries. ● Check ALL-OFF switch on Remote Control Unit is set to “ ON ” . ● Make sure nothing is between Infrared Remote Receiver and Remote Control Unit. ● Make sure you are not too far from a projector when using Remote Control Unit. Maximum operating range is 16.4 ’ (5m). ●[...]

42 APPENDIX Multi-media Projector Accessories ● Specifications are subject to change without notice. TECHNICAL SPECIFICA TIONS 1.3" TFT Active Matrix type, 3 panels 18.5 lbs (8.4 kg) 12.6" x 6.6" x 18.5" (319 mm x 168 mm x 470 mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N Up [...]

43 APPENDIX CONFIGURA TIONS OF TERMINALS COMPUTER INPUT-1 TERMINAL (ANALOG) Terminal : HDB15-PIN Connect display output terminal of computer to this terminal with VGA Cable (supplied). When connecting Macintosh computer, MAC Adapter (supplied) is required. 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue I[...]

Printed in Japan Part No. 610 297 8247 (1AA6P1P3130-- MA8AA) SANY O Electric Co., Ltd[...]