Идти на страницу of
Похожие руководства по эксплуатации
-
Car
Ford Fusion Energi (2014)
476 страниц -
Car
Ford Transit Connect - april 2009 - juli 2010
174 страниц 7.21 mb -
Car
Ford Focus 2005
186 страниц 2.5 mb -
Car
Ford Transit Connect (2013)
10 страниц 0.05 mb -
Car
Ford Mondeo - sept 2008 - feb 2009
2 страниц 1.32 mb -
Car
Ford TOURNEO CONNECT - mei 2011 - okt 2013
190 страниц 15.9 mb -
Car
Ford Fusion Hybrid (2015)
494 страниц -
Car
Ford Kuga (2011)
248 страниц
Хорошее руководство по эксплуатации
Законодательство обязывает продавца передать покупателю, вместе с товаром, руководство по эксплуатации Ford F-650 (2008). Отсутствие инструкции либо неправильная информация, переданная потребителю, составляют основание для рекламации в связи с несоответствием устройства с договором. В законодательстве допускается предоставлении руководства в другой, чем бумажная форме, что, в последнее время, часто используется, предоставляя графическую или электронную форму инструкции Ford F-650 (2008) или обучающее видео для пользователей. Условием остается четкая и понятная форма.
Что такое руководство?
Слово происходит от латинского "instructio", тоесть привести в порядок. Следовательно в инструкции Ford F-650 (2008) можно найти описание этапов поведения. Цель инструкции заключается в облегчении запуска, использования оборудования либо выполнения определенной деятельности. Инструкция является набором информации о предмете/услуге, подсказкой.
К сожалению немного пользователей находит время для чтения инструкций Ford F-650 (2008), и хорошая инструкция позволяет не только узнать ряд дополнительных функций приобретенного устройства, но и позволяет избежать возникновения большинства поломок.
Из чего должно состоять идеальное руководство по эксплуатации?
Прежде всего в инструкции Ford F-650 (2008) должна находится:
- информация относительно технических данных устройства Ford F-650 (2008)
- название производителя и год производства оборудования Ford F-650 (2008)
- правила обслуживания, настройки и ухода за оборудованием Ford F-650 (2008)
- знаки безопасности и сертификаты, подтверждающие соответствие стандартам
Почему мы не читаем инструкций?
Как правило из-за нехватки времени и уверенности в отдельных функциональностях приобретенных устройств. К сожалению само подсоединение и запуск Ford F-650 (2008) это слишком мало. Инструкция заключает ряд отдельных указаний, касающихся функциональности, принципов безопасности, способов ухода (даже то, какие средства стоит использовать), возможных поломок Ford F-650 (2008) и способов решения проблем, возникающих во время использования. И наконец то, в инструкции можно найти адресные данные сайта Ford, в случае отсутствия эффективности предлагаемых решений. Сейчас очень большой популярностью пользуются инструкции в форме интересных анимаций или видео материалов, которое лучше, чем брошюра воспринимаются пользователем. Такой вид инструкции позволяет пользователю просмотреть весь фильм, не пропуская спецификацию и сложные технические описания Ford F-650 (2008), как это часто бывает в случае бумажной версии.
Почему стоит читать инструкции?
Прежде всего здесь мы найдем ответы касательно конструкции, возможностей устройства Ford F-650 (2008), использования отдельных аксессуаров и ряд информации, позволяющей вполне использовать все функции и упрощения.
После удачной покупки оборудования/устройства стоит посвятить несколько минут для ознакомления с каждой частью инструкции Ford F-650 (2008). Сейчас их старательно готовят или переводят, чтобы они были не только понятными для пользователя, но и чтобы выполняли свою основную информационно-поддерживающую функцию.
Содержание руководства
-
Страница 1
Introduction 4 Safety and environment protection 5 V ehicle Inspection Guide 1 1 Instrument Cluster 21 W arning lights and chimes 21 Gauges 27 Entertainment Systems 32 AM/FM stereo 32 AM/FM stereo with in-dash six CD 38 Climate Controls 44 Heater only 44 Manual heating and air conditioning 45 Lights 47 Headlamps 47 T urn signal control 48 Interior [...]
-
Страница 2
Seating and Safety Restraints 62 Seating 62 Safety restraints 69 Child restraints 78 Driving 85 Starting 85 Brakes 92 Air suspension 113 T ransmission operation 115 V ehicle loading 128 Roadside Emergencies 134 Hazard flasher switch 135 Fuses and relays 135 Jump starting 142 W recker towing 146 Customer Assistance 150 Getting assistance outside the[...]
-
Страница 3
Scheduled Maintenance Guide 227 Index 262 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company . Ford may change the contents without notice a[...]
-
Страница 4
CALIFORNIA Proposition 65 W arning W ARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemic[...]
-
Страница 5
This Owner’ s Guide describes every option and model variant available and therefore some of the items covered may not apply to your particular vehicle. Furthermore, due to printing cycles it may describe options before they are generally available. Remember to pass on the Owner’ s Guide when reselling the vehicle. It is an integral part of the[...]
-
Страница 6
SPECIAL NOTICES Emission warranty The New T ruck Limited W arranty includes Basic Coverage, Corrosion Coverage, Frame Coverage, Federal Emissions Defect W arranty and California Defects W arranty . For a detailed description of what is covered and what is not covered, refer to the W arranty Guide that is provided to you along with your Owner’ s G[...]
-
Страница 7
T o access this information, special equipment must be directly connected to the recording modules. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent, unless pursuant to court order or where required by law enforcement, other government authorities or other third parties acting with lawful[...]
-
Страница 8
These are some of the symbols you may see on your vehicle. V ehicle Symbol Glossary Safety Alert See Owner’ s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat Lower Anchor Child Seat T ether Anchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid - Non-Petroleum Based Parking Aid System Stability Control System[...]
-
Страница 9
V ehicle Symbol Glossary Power W indows Front/Rear Power W indow Lockout Child Safety Door Lock/Unlock Interior Luggage Compartment Release Panic Alarm Engine Oil Engine Coolant Engine Coolant T emperature Do Not Open When Hot Battery A void Smoking, Flames, or Sparks Battery Acid Explosive Gas Fan W arning Power Steering Fluid Maintain Correct Flu[...]
-
Страница 10
FEDERAL HIGHWAY ADMINISTRATION REGULATION Regulations such as those issued by the Federal Highway Administration or issued pursuant to the Occupational Safety and Health Act (OSHA), and/or state and local laws and regulations may require additional equipment for the way you intend to use the vehicle. It is the responsibility of the registered owner[...]
-
Страница 11
T o be sure your vehicle is ready to operate, conduct a pre-trip inspection at the beginning of each work period. Follow the steps listed in this section to ensure a proper vehicle inspection procedure. The pages in this section may be produced locally and used on a regular basis. V EHICLE INSPECTION INFORMATION Note: Always make sure the parking b[...]
-
Страница 12
Engine compartment (with engine stopped) Any leaks: Check for signs of fluid puddles, dripping fluid on the ground under the engine or the underside of the engine. HV AC air inlet: Check for debris, leaves, etc. that may have collected on the HV AC air inlet grille or inside the exterior module as this may cause reduced system performance. Exercise[...]
-
Страница 13
Engine starting (parking brake applied) Starting the engine: V erify the parking brake is set. Depress the clutch (if equipped with a manual transmission) and verify the transmission is in neutral. V ehicles equipped with an automatic transmission should be in N (Neutral) or P (Park) if equipped with a Park position. When the W AIT TO ST ART indica[...]
-
Страница 14
Engine starting (parking brake applied) Parking brake: Check that the parking brake will hold the vehicle by gently trying to pull forward with the parking brake applied. Air brake check: Check the air brakes in the following manner (Chock the wheels, if necessary . Push in the parking brake and on tractors, also push in the tractor parking brake k[...]
-
Страница 15
Front of vehicle Lights: Make sure all lights illuminate and are clean. Make sure headlights function on both high and low beams. Make sure reflectors are clean and unbroken and of proper color (red on rear , amber elsewhere). Make sure the running lights are also clean and unbroken. Steering gear: Look for missing or loose fasteners, power steerin[...]
-
Страница 16
Front brakes Hoses: Check for cracked, worn or frayed hoses. Make sure all couplings are secured. Chambers: Make sure brake chambers are not cracked or dented and that they are securely mounted. Slack adjuster: Check for broken, loose or missing parts; the angle between the push rod and adjuster arm should be approximately 90° when the brakes are [...]
-
Страница 17
If a wheel must be changed, obtain expert tire service help. Mounting and un-mounting of tires should only be performed by a qualified technician using necessary safety procedures and equipment, otherwise the result could be property damage, personal injury or death. Driver/Fuel area Fuel tank: Make sure the fuel tank and caps are secure. Make sure[...]
-
Страница 18
Rear of vehicle Air/Electric lines: Make sure that air hoses are not cut, cracked, chafed or worn. Listen for audible air leaks, Make sure air and electrical lines are not tangled, crimped or pinched or being dragged against any truck parts. Electrical line insulation should not be cut, cracked, chafed or worn. None of the air or electrical line sh[...]
-
Страница 19
T ractor - coupling system Kingpin/Apron: Make sure kingpin is not bent or worn. Also make sure that the apron lies flat on the fifth wheel skid plate and that the visible part of the apron is not bent, worn, cracked or broken. Rear springs Springs: Check for broken or shifted leaves or leaves that are in contact, or nearly contacting a tire, rim, [...]
-
Страница 20
Rear brakes Drum: Make sure there are no cracks, dents or holes and no loose or missing bolts. Make sure brake linings are not worn or dangerously thin or contaminated by lubricant. Rear wheels Spacers: Make sure dual wheels are evenly separated and that tires are not touching one another . Rims: Check for damaged or bent rims. Rims should not have[...]
-
Страница 21
W ARNING LIGHTS AND CHIMES W arning lights and gauges can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’ s functions. Many lights will illuminate when you start your vehicle to make sure the bulb works. If any light remains [...]
-
Страница 22
Stop engine: This light is used in conjunction with the electronic engine control. When illuminated, the STOP ENGINE lamp indicates the need to stop the engine as soon as it can be safely done. If the STOP ENGINE lamp begins flashing automatic engine shutdown may take place in as little as 20 seconds. In the event of engine shutdown, make sure the [...]
-
Страница 23
Brake system warning light: To confirm the brake system warning light is functional, this light will momentarily illuminate when the ignition is turned to the ON position when the engine is not running. If the brake system warning light does not illuminate at this time, seek service immediately from your dealership. Illumination after starting the [...]
-
Страница 24
W ater in fuel: During refueling, it is possible for water -contaminated diesel fuel to be pumped into your tank. Y our vehicle fuel system is equipped with a fuel filter/water separator to remove water from the fuel. The W A TER IN FUEL light will illuminate when the fuel filter/water separator has a significant quantity of water in it. If the lig[...]
-
Страница 25
T railer ABS brake system: Illuminates briefly when the engine is powered-up and only when a PLC trailer or a PLC diagnostic tool is connected. If the light remains on after the vehicle is started, continues to flash or fails to illuminate, have the system serviced immediately . Anti-lock brake system: If the ABS light stays illuminated or continue[...]
-
Страница 26
Charging system: Illuminates when the battery is not charging properly . Diesel particulate filter (Cummins engines only): Illuminates if the soot in the DPF has reached a level where it requires operator assistance. Refer to Diesel Particulate Filter in the Maintenance and Specifications chapter and your engine operator’ s manual, for more detai[...]
-
Страница 27
GAUGES Some of the gauges shown are optional based on vehicle equipment; your vehicle may not have some of the gauges shown in this section. Speedometer: Indicates the current vehicle speed. T achometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scale may damage the eng[...]
-
Страница 28
T rip odometer: Registers the miles (kilometers) of individual journeys. T o reset, depress the control. Fuel gauge: Indicates approximately how much fuel is left in the fuel tank (when the ignition is in the on position). If your vehicle is equipped with dual fuel tanks, the engine will draw fuel from the passenger -side fuel tank only . W ith dua[...]
-
Страница 29
Engine oil pressure gauge: Indicates engine oil pressure. The needle should stay in the normal operating range (as indicated by the arrows). If the needle falls below the normal range, stop the vehicle, turn off the engine and check the engine oil level. Add oil if needed. If the oil level is correct, have your vehicle checked at your dealership or[...]
-
Страница 30
Hourmeter (if equipped): Registers the hours the engine has been operating. Air filter restriction gauge: Measures the vacuum inside the air cleaner . The more the air cleaner is restricted (dirty , clogged), the higher the vacuum reading. Change the air filter when the gauge reads 25 inches. After installation of the new filter element, reset the [...]
-
Страница 31
Air pressure gauge: All vehicles equipped with air brakes have a dual-pointer air gauge to indicate the pressure in each brake circuit. The green pointer indicates the air pressure in the primary system and the red pointer indicates the air pressure in the secondary system. When the pressure is too low for normal brake operation (less than 60 psi [[...]
-
Страница 32
AUDIO SYSTEMS AM/FM stereo (if equipped) 1. SEEK: Press / to find the next strong station down/up the frequency band. 2. TUNE: Press / to manually change radio frequency down/up. 3. AM/FM: Press to choose a frequency band in radio mode. 4. Memory preset buttons: T o set a station: Select frequency band AM/FM; tune to a station, press and hold a pre[...]
-
Страница 33
5. Power/V olume: Press to turn ON/OFF; turn to increase or decrease volume levels. 6. TONE: Press TONE until the desired level — Bass, T reble, Fade appears on the display . T urn the volume control to raise/lower the levels, or to move the audio sound from the right to left or the front to back (if equipped). 7. CLK (Clock): T o set the hour , [...]
-
Страница 34
Satellite Compatible AM/FM Stereo In-Dash Single CD/MP3 Radio (if equipped) 1. SEEK: Press and release SEEK / for previous/next strong station or track. 2. TEXT : The filename (Fi), song title (So), artist text (Ar) or album text (AL) may be viewed while playing an MP3 selection. When MP3 selection text is shown on the message display , its corresp[...]
-
Страница 35
3. AUX: This function is not operational. 4. MUTE: Press to MUTE playing media; press again to return to playing media. 5. EJ: Press to eject a CD. 6. Bass: Press BASS; then press SEL / to decrease/increase the bass output. T reble: Press TREB; then press SEL / to decrease/increase the treble output. 7. Select: Use with Bass, T reble, Balance, Fade[...]
-
Страница 36
Folder/T rack mode: In MP3 mode, press MENU until MODE appears in the display . Use SEL to toggle between FOLDER (only tracks within selected folder are accessible) or TRACK (all tracks on disc are accessible) MODE. 10. REPEA T : Repeats the current CD/MP3 track when active (ON). Press to show repeat status. Press again to toggle status. 11. SHUFFL[...]
-
Страница 37
19. Power/volume: Press to turn ON/OFF; turn to increase or decrease volume levels. 20. CD: Press to enter CD mode. CD units are designed to play commercially pressed 4.75 in (12 cm) audio compact discs only . Due to technical incompatibility , certain recordable and re-recordable compact discs may not function correctly when used in Ford CD player[...]
-
Страница 38
Premium Satellite Compatible AM/FM Stereo In-Dash Six CD/MP3 Radio (if equipped) 1. SEEK: Press and release SEEK / for previous/next strong station or track. 2. TEXT : The filename (Fi), song title (So), artist text (Ar) or album text (AL) may be viewed while playing an MP3 selection. When MP3 selection text is shown on the message display , its co[...]
-
Страница 39
3. AUX: Press to toggle between the current playing media and DVD (if equipped). 4. MUTE: Press to MUTE playing media; press again to return to playing media 5. EJ: Press to eject a CD. Press EJ and a memory preset to eject a specific disc. Press and hold to eject all loaded discs. 6. Bass: Press BASS; then press SEL / to decrease/increase the bass[...]
-
Страница 40
9. Menu: Press to access the following functions: Compression: Brings soft and loud CD passages together for a more consistent listening level when in CD mode. Press MENU until compression status is displayed. Press the SEL control to enable the compression feature when COMPRESS OFF is displayed. Press the SEL control again to disable the feature w[...]
-
Страница 41
15. REW (Rewind): In CD/MP3 mode, press until desired selection is reached. 16. SA T (if equipped): Y our radio comes equipped with Satellite Ready capability . The kit to enable the Satellite reception is available through your dealer . Detailed satellite instructions are included with the dealer installed kit. Dealer installed satellite kit only [...]
-
Страница 42
22. Scan: Press SCAN to hear a brief sampling of radio stations or CD/MP3 tracks. Press again to stop. 23. Disc/T une: Press or to manually tune down/up the radio frequency band, or to listen to the previous/next CD. CA T (Category): CA T is only available when equipped with Satellite Radio. Y our Audiophile radio comes equipped with Satellite read[...]
-
Страница 43
CD/CD player care Do: • Handle discs by their edges only . Never touch the playing surface. • Inspect discs before playing. Clean only with an approved CD cleaner and wipe from the center out. Don’t: • Expose discs to direct sunlight or heat sources for extended periods of time. • Insert more than one disc into each slot of the CD changer[...]
-
Страница 44
HEATER ONLY SYSTEM (IF EQUIPPED) 1. Fan speed adjustment: Controls the volume of air circulated in the vehicle. 2. T emperature selection: Controls the temperature of the airflow in the vehicle. 3. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief description on each control. : Distributes outs[...]
-
Страница 45
T o aid in side window defogging/demisting in cold weather: 1. Select 2. Set the temperature control to full heat 3. Set the fan speed to its highest speed 4. Direct the outer instrument panel vents towards the side windows T o increase airflow to the outer instrument panel vents, close the vents located in the middle of the instrument panel. Do no[...]
-
Страница 46
Operating tips • T o reduce fog build up on the windshield during humid weather , place the air flow selector in the position. • T o reduce humidity build up inside the vehicle: do not drive with the air flow selector in the OFF or MAX A/C position. • Under normal weather conditions, do not leave the air flow selector in MAX A/C or OFF when t[...]
-
Страница 47
HEADLAMP CONTROL T urns the lamps off. T urns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. T urns the headlamps on. High beams/Flash-to-pass Push the lever toward the instrument panel to activate the high beams. Pull the lever towards you to deactivate. Pull toward you slightly to activate flash-to-pass. Release[...]
-
Страница 48
PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel and all applicable switches in the vehicle during headlamp and parklamp operation. Rotate the control to the full up position, past the detent, to turn on the interior lamps. Rotate the control to the full down position, past the detent, to prevent the interior lights from il[...]
-
Страница 49
INTERIOR LAMPS Map lamps (if equipped) T o turn on the map lamps, press the control next to each lamp. EXTERIOR BULBS Bulb inspection It is a good safety practice to check operation of headlamps, parking lamps, turn signals, clearance and marker lamps, instrument panel and control lamps each day . Using the right bulbs Function Number of bulbs T ra[...]
-
Страница 50
Bulb replacement Replacing headlamp bulbs T o remove the headlamp bulbs: 1. Make sure the headlamp control is in the position. 2. Remove the four screws and move the parking lamp assembly away from the headlamp bulb. 3. Remove the four screws and the retaining bracket from the headlamp bulb. 4. Pull the headlamp bulb out of the housing, disconnect [...]
-
Страница 51
2. Remove the four screws from the lamp assembly . 3. Carefully lower the lamp assembly and pull the bulb socket straight out of the lamp assembly . 4. Carefully pull the bulb straight out of the socket and push in the new bulb. 5. T o complete installation, follow the removal procedure in reverse order . Replacing front clearance and identificatio[...]
-
Страница 52
MULTI-FUNCTION LEVER Windshield wiper/washer controls Rotate the windshield wiper control to the desired interval, low or high speed position. The bars of varying length are for intermittent wipers. When in this position rotate the control upward for fast intervals and downward for slow intervals. Push the control on the end of the stalk to activat[...]
-
Страница 53
Never adjust the steering wheel when the vehicle is moving. AUXILIARY POWER POINT The auxiliary power point is located on the instrument panel. Note: Do not use the power point for operating the cigarette lighter element (if equipped). Note: T o prevent the fuse from being blown, do not use the power point(s) over the vehicle capacity of 12 VDC/180[...]
-
Страница 54
• Press the top portion of the rocker switch to close. • Press the bottom portion of the rocker switch to open. One touch down • Press AUTO completely down and release quickly . The driver’ s window will open fully . Depress again to stop window operation. AUTO AUTO AUTO 2008 F-650/750 (f67) Supplement USA (fus) Driver Controls 54[...]
-
Страница 55
Window lock The window lock feature allows only the driver to operate the power windows. T o lock out all the window controls except for the driver’ s press the left side of the control. Press the right side to restore the window controls. EXTERIOR MIRRORS W ith the doors closed and the seat adjusted for proper comfort, move the mirrors to maximi[...]
-
Страница 56
Power side view mirrors (if equipped) The ignition can be in any position to adjust the power side view mirrors. T o adjust your mirrors: 1. Select L to adjust the left mirror or R to adjust the right mirror . 2. Move the control in the direction you wish to tilt the mirror . 3. Return to the center position to lock mirrors in place. 4. If your veh[...]
-
Страница 57
The spotter mirror (if equipped) is not heated. Fold-away mirrors The mirrors can be manually folded forward or backwards for narrow spaces like driving through an automatic car wash or backing out of a garage with the trailer tow mirror . The telescoping feature (if equipped) allows the mirror to extend approximately three inches (76 mm). This fea[...]
-
Страница 58
T o turn speed control off Press OFF or turn off the ignition. Once speed control is switched off, the previously programmed engine RPM will be erased. Do not use the speed control in heavy traffic or on roads that are winding, slippery , or unpaved. T o set a speed Press SET +. If the vehicle is moving, this will set the vehicle speed. If the vehi[...]
-
Страница 59
T o set a higher set speed Press and hold SET +. If the vehicle is moving, this will increase vehicle speed; if the vehicle is stationary , this will increase engine RPM. Release the control when the desired vehicle speed/engine RPM is reached. Press and release SET + to operate the tap-up function. Each press will increase the set speed by 1 mph ([...]
-
Страница 60
T o disengage speed control • Depress the brake pedal or • Depress the clutch pedal (if equipped). Disengaging the speed control will not erase the previously programmed set speed or engine RPM. Pressing OFF will erase the previously programmed engine RPM. CR UISE RPM OFF 2008 F-650/750 (f67) Supplement USA (fus) Driver Controls 60[...]
-
Страница 61
T o return to a previously set speed Press RESUME -. For RESUME - to operate, the vehicle speed must be above 30 mph (48 km/h) or engine speed must be above 1,000 RPM. KEYS The key operates all locks on your vehicle. In case of loss, replacement keys are available from your dealer . Y ou should always carry a second key with you in a safe place in [...]
-
Страница 62
SEATING Notes: Reclining the seatback can cause an occupant to slide under the seat’ s safety belt, resulting in severe personal injuries in the event of a collision. Do not pile cargo higher than the seatbacks to reduce the risk of injury in a collision or sudden stop. 40/20/40 split bench seat (if equipped) • Lift the track release bar to mov[...]
-
Страница 63
Rotate control to adjust seatback. Using the manual lumbar support For more lumbar support, turn the lumbar support control toward the front of the vehicle. For less lumbar support, turn the lumbar support control toward the rear of the vehicle. Easy-Aire seat (if equipped) Move handle to the left to move seat forward or backward. 2008 F-650/750 (f[...]
-
Страница 64
Pull handle out to move the seat cushion forward or backward. Rotate control to adjust seatback. Pump handle to raise seat height. Push handle full down to lower . T o reduce the risk of excess slack in the belt system, always adjust the seat height before fastening the seat belt. 2008 F-650/750 (f67) Supplement USA (fus) Seating and Safety Restrai[...]
-
Страница 65
Adjusting the front power seat (if equipped) The control is located on the outboard side of the seat cushion. Press to raise or lower the front portion of the seat cushion. Press to raise or lower the rear portion of the seat cushion. Press the control to move the seat forward, backward, up or down. 2008 F-650/750 (f67) Supplement USA (fus) Seating[...]
-
Страница 66
Air-Ride seat without self-contained pump (if equipped) Move handle to the left to move seat forward or backward. Push up on the switch to raise the seat height. Press down on the switch to lower the seat height. T o reduce the risk of excess slack in the belt system, always adjust the seat height before fastening the seat belt. Press up on the swi[...]
-
Страница 67
Press down on the switch to reduce the firmness (lumbar support) of the seatback. Air-Ride seat with self-contained pump (if equipped) 1. Chugger option: Dampens road vibrations and allows the seat to move with the driver when unlocked. T o unlock, sit in the seat and slide the tab away from the seat (to the right) T o lock, sit in the seat and sli[...]
-
Страница 68
Press the top of the rear control to inflate the upper lumbar support; press the bottom of the rear control to deflate the upper lumbar support. 5. Recline: Lift the handle to adjust the angle of the seatback. Heated seats (if equipped) T o operate the heated seats: • Push control to activate. • Push again to deactivate. REAR FLIP-UP SEAT (IF E[...]
-
Страница 69
SAFETY RESTRAINTS Safety restraints precautions Always drive and ride with your seatback upright and the lap belt snug and low across the hips. T o reduce the risk of injury , make sure children sit where they can be properly restrained. All occupants of the vehicle, including the driver , should always properly wear their safety belts. Never let a[...]
-
Страница 70
Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. 2. T o unfasten, push the release button and remove the tongue from the buckle. The front and rear outbo[...]
-
Страница 71
Shorten and fasten the belt when not in use. V ehicle sensitive mode The vehicle sensitive retractor allows free shoulder belt length adjustment to your movements and locks in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply , or the vehicle receives an impact of approximately 5 mph (8 km/h) or more[...]
-
Страница 72
• SuperCab • Crew Cab 2008 F-650/750 (f67) Supplement USA (fus) Seating and Safety Restraints 72[...]
-
Страница 73
T o lower the shoulder belt height, push the button and slide the height adjuster down. T o raise the height of the shoulder belt, slide the height adjuster up. Pull down on the height adjuster to make sure it is locked in place. Position the safety belt height adjusters so that the belt rests across the middle of your shoulder . Failure to adjust [...]
-
Страница 74
Failure to inspect and if necessary replace the safety belt assembly under the above conditions could result in severe personal injuries in the event of a collision. Refer to Interior in the Cleaning chapter . Safety belt warning light and indicator chime The safety belt warning light illuminates in the instrument cluster and a chime sounds to remi[...]
-
Страница 75
If... Then... The driver’ s safety belt is not buckled before the vehicle has reached at least 3 mph (5 km/h) and 1-2 minutes have elapsed since the ignition switch has been turned to ON... The Belt-Minder 威 feature is activated - the safety belt warning light illuminates and the warning chime sounds for 6 seconds every 30 seconds, repeating fo[...]
-
Страница 76
Reasons given... Consider ... “T raffic is light” Nearly 1 of 2 deaths occur in single-vehicle crashes, many when no other vehicles are around. “Belts wrinkle my clothes” Possibly , but a serious crash can do much more than wrinkle your clothes, particularly if you are unbelted. “The people I’m with don’t wear belts” Set the example[...]
-
Страница 77
• The driver’ s safety belt is unbuckled. • The headlamp control is in the position. While the design allows you to deactivate your Belt-Minder 威 ,t h i s system is designed to improve your chances of being safely belted and surviving an accident. W e recommend you leave the Belt-Minder 威 system activated for yourself and others who may u[...]
-
Страница 78
9. After receiving confirmation, the deactivation/activation procedure is complete. SAFETY RESTRAINTS FOR CHILDREN Important child restraint precautions Y ou are required by law to use safety restraints for children in the U.S. and Canada. If small children (generally children who are four years old or younger and who weigh 40 lb. [18 kg] or less) [...]
-
Страница 79
Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check seat covers and buckles before you place a child anywhere near them. Child booster seats Children outgrow a typical convertible or toddler seat when they weigh 40 lb. (18 kg) and are around 4 years of age. Although the l[...]
-
Страница 80
T ypes of booster seats There are two types of belt-positioning booster seats: • Those that are backless. If your backless booster seat has a removable shield, remove the shield and use the lap/shoulder belt. If a seating position has a low seat back and no head restraint, a backless booster seat may place your child’ s head (top of ear level) [...]
-
Страница 81
Follow all instructions provided by the manufacturer of the booster seat. Never put the shoulder belt under a child’ s arm or behind the back because it eliminates the protection for the upper part of the body and may increase the risk of injury or death in a collision. Never use pillows, books, or towels to boost a child. They can slide around a[...]
-
Страница 82
Ford recommends the use of a child safety seat having a top tether strap. Install the child safety seat in a seating position with a tether anchor . For more information on top tether straps and anchors, refer to Attaching safety seats with tether straps. Carefully follow all of the manufacturer’ s instructions included with the safety seat you p[...]
-
Страница 83
3. Buckle the seat belt. Push down on the child seat and pull on the shoulder portion of the belt to snug the lap belt. Hold the lap and shoulder belts next to the tongue and unbuckle the belt. 4. Install a locking clip over both lap and shoulder belt portions next to the sliding tongue. Rebuckle the belt. Obtain the locking clip kit (part number F[...]
-
Страница 84
Attaching safety seats with tether straps Most forward-facing child safety seats include a tether strap which goes over the back of the seat and hooks to an anchoring point. The F-650/750 vehicles are not equipped with an anchoring point. T ether straps are available as an accessory for many older safety seats. Contact the manufacturer of your chil[...]
-
Страница 85
STARTING Positions of the ignition 1. ACCESSORY , allows the electrical accessories such as the radio to operate while the engine is not running. 2. LOCK, locks the steering wheel, automatic transmission gearshift lever and allows key removal. 3. OFF , shuts off the engine and all accessories without locking the steering wheel. 4. ON, all electrica[...]
-
Страница 86
Note: When starting the engine, do not press the accelerator as engine damage may result. 1. Ensure headlamps and all accessories are turned off, the parking brake is applied and the transmission is in the neutral position (or P [Park] for Allison 2200 transmissions). 2. T urn the key to ON, but do not start the engine. In cooler weather , the air [...]
-
Страница 87
• Do not increase engine speed until the oil pressure gauge indicates normal pressure; this should be indicated on the gauge within 15 seconds after starting. • Idle the engine for three to five minutes before operating with a full load. • T ry to limit engine idle to 10 minutes. Excessive idling reduces fuel economy . • When starting a col[...]
-
Страница 88
a buildup of heavy deposits of carbon and rust on valve stems causing them to stick which, in turn, can cause valvetrain damage. Winter fronts The use of winter fronts, or other air -restrictive devices mounted in front of the radiator on vehicles with chassis-mounted charge air coolers, are not recommended unless extremely cold weather conditions [...]
-
Страница 89
GENERAL OPERATING INSTRUCTIONS • A void extended and unnecessary idling. • Start the vehicle in motion by using the highest gear speed in the transmission that will let the engine easily start the load without slipping the clutch. • Accelerate smoothly and evenly; rapid acceleration increases fuel consumption without increasing engine perform[...]
-
Страница 90
get out of the vehicle and visually check the intended path is clear; back-up slowly as to allow others time to move, if necessary . If an electrical back-up alarm is installed, it should be connected to the back-up lamp circuit. Parking your vehicle Always use the parking brake. When parking on a grade, block the wheels and turn the front wheels t[...]
-
Страница 91
If the engine shuts down, it can be restarted and operated for 30 seconds at a time or until the problem is corrected. Do not attempt to use this restarting feature to drive the vehicle very far as serious engine damage could result. In the event of engine shutdown, make sure the vehicle is safely off the road and the problem is remedied prior to r[...]
-
Страница 92
If brakes do not grip well • If you have been driving through deep water , gently apply the brakes several times while the vehicle is moving slowly . • Let the brakes cool if you have been using them excessively , as in mountain driving or after several fast, high speed stops. • Check brake adjustment. • Check brake linings for excessive we[...]
-
Страница 93
If the yellow BRAKE RESERVE (E-motor) warning light remains on while the engine is running, this indicates inadequate hydraulic booster pressure or reserve pump system failure. Stop the vehicle safely as soon as possible and seek service immediately . Parking brake Apply the parking brake whenever the vehicle is parked. T o set the parking brake, p[...]
-
Страница 94
The parking BRAKE warning lamp in the instrument cluster illuminates and will remain illuminated (when the ignition is turned on) until the parking brake is released. Push the palm release lever on the parking brake handle and push down as far as possible to release the brake. Driving with the parking brake on will cause the brakes to wear out quic[...]
-
Страница 95
Applying the parking brake T o apply the parking brake, pull the yellow , dash-mounted parking brake knob. A red light on the dash panel should illuminate indicating that the parking brake has been successfully set. Note: If the park brake indicator light blinks and a warning chime sounds when the control knob is pulled, the parking brake is not fu[...]
-
Страница 96
If the parking brake is applied due to low air pressure, immediate service is required to the parking brake system. Parking brake warning system If the park brake light blinks and a chime sounds when pulling the yellow control knob out, this indicates the parking brake is not functioning properly; seek service for the parking brake immediately . Th[...]
-
Страница 97
Loosen the jam nut (1) and un-thread the adjustment rod (2) from the chamber to reduce tension on the cable (3). Continue to un-thread the adjustment rod all the way and remove it from the chamber . The nut and shaft are metric. AIR BRAKES (IF EQUIPPED) General air brake information After starting the engine, give the air compressor time to build u[...]
-
Страница 98
Periodically check the air pressure gauge while driving. Pressure should range between approximately 100–125 psi (690–862 kPa). The air compressor governor cut-in and cut-out pressure settings are preset at the factory and are not adjustable. When air pressure is insufficient (below 60 psi [414 kPa]), a warning light illuminates and a buzzer so[...]
-
Страница 99
Cam brakes - automatic slack adjusters Standard air brakes (cam) are equipped with automatic brake adjusters. Automatic adjustment occurs during brake applications. Inspect brakes for proper adjustment at the intervals listed in the Scheduled Maintenance Guide chapter . Do not manually adjust the automatic slack adjusters to correct excessive pushr[...]
-
Страница 100
Drain all the air brake reservoirs daily , completely to 0 psi/kPa, by opening the draincock at the ends of the tanks (where accessible. Pull-chains are used when the drains are undercab or otherwise inaccessible). Close draincock after complete draining. Air tanks equipped with automatic moisture ejector valves may also be drained manually as requ[...]
-
Страница 101
Parking brake control (knob) Pull the yellow parking brake knob out to apply the parking brake. Push the knob in to release the parking brake. This control is used for parking only . Do not leave the vehicle unattended after setting the parking brake without placing the transmission in R (Reverse) for manual transmission, N (Neutral) for automatic [...]
-
Страница 102
Releasing spring brake manually Do not attempt to disassemble the parking brake chamber under any circumstances. The high spring load may cause serious injury if the chamber clamps are removed. If air pressure is released from the spring brake chamber the power spring applies the brake and, unless air pressure can be re-established, the spring brak[...]
-
Страница 103
4. T urn the release stud one-quarter turn to engage the stud tangs with the slot in the pressure plate. Keep the stud engaged and install the nut on the release stud. 5. T ighten the nut until the spring is fully caged and the brakes are released. Do not loosen or remove the release stud and nut unless the brake chamber is completely assembled and[...]
-
Страница 104
Operation Push the rocker switch up to turn the exhaust brake on. The switch will illuminate in the ON position. Push the switch down to turn the brake off. Starting engine Before starting the engine, make sure that the exhaust brake switch is in the OFF position. Do not turn the exhaust brake on until the engine has reached normal operating temper[...]
-
Страница 105
Note: Engine speed has a major influence of retarding performance. When engine speed is maintained at the maximum allowable level, the exhaust brake will operate at peak performance. The exhaust brake is not recommended for use on slippery or low traction road surfaces. Under these conditions a loss of vehicle control could occur . Exhaust brake op[...]
-
Страница 106
Note: Installing an exhaust or auxiliary brake does not necessarily protect the engine from exceeding maximum governed speed. The primary brakes should be used to never allow the engine to exceed maximum governed speed under any conditions. T RAILER BRAKE HAND CONTROL (IF EQUIPPED) The hand control, located on the right-hand side of the instrument [...]
-
Страница 107
T RAILER AIR SUPPLY AND PARKING BRAKE MODULAR CONTROLS (IF EQUIPPED) The trailer air supply valve delivers air to the trailer supply and will automatically pop out, shutting off the trailer supply if pressure is decreased to approximately 35 psi (249 kPa). The parking brake controls the spring brakes on the tractor . When the knob is pulled out it [...]
-
Страница 108
The parking brake (2–yellow knob) can now be pushed in and supply air to the tractor spring brakes, releasing them. Normal driving position W ith both knobs pushed in, air is then supplied to both trailer and tractor spring brakes, and all brakes are released. 1 2 1 2 2008 F-650/750 (f67) Supplement USA (fus) Driving 108[...]
-
Страница 109
System park W ith both knobs pushed in (normal driving position), the parking brakes for both the tractor and trailer can be applied by pulling the parking brake knob (2) out, exhausting air from the tractor spring brakes, simultaneously causing the trailer air supply valve to pop out, applying the trailer brakes. T railer charge If both knobs are [...]
-
Страница 110
Automatic application If both knobs are pushed in and the brake system air pressure is reduced to approximately 35 psi (249 kPa), the trailer air supply (1) knob will automatically pop out applying the emergency or parking brakes on the trailer . If the trailer air supply (1) knob is manually held in and the air pressure is reduced to approximately[...]
-
Страница 111
ANTI-LOCK BRAKE SYSTEM (ABS) A noise from the hydraulic pump motor and pulsation in the pedal may be observed during ABS braking events. Pedal pulsation coupled with noise while braking under panic conditions or on loose gravel, bumps, wet or snowy roads is normal and indicates proper functioning of the vehicle’ s ABS. If the vehicle has continuo[...]
-
Страница 112
• W e recommend that you familiarize yourself with this braking technique. However , avoid taking any unnecessary risks. T RACTION CONTROL 姟 (IF EQUIPPED) Y our vehicle may be equipped with a T raction Control 娂 system. This system helps you maintain the stability and steerability of your vehicle, especially on slippery road surfaces such as [...]
-
Страница 113
Aggressive driving in any road conditions can cause you to lose control of your vehicle increasing the risk of severe personal injury or property damage. The occurrence of a T raction Control 娂 event is an indication that at least some of the tires have exceeded their ability to grip the road; this may lead to an increased risk of loss of vehicle[...]
-
Страница 114
T ractor-trailer connections T o reduce the risk of personal injury , use extreme caution when making brake and light connections. Inclement weather and accumulated road contamination deposits on handhold and stepping surfaces require extra care to avoid slip and falls. Provide adequate lighting of working areas. Do not climb on the back of the tra[...]
-
Страница 115
AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED) Main transmission, auxiliary transmission, transfer case and power take-off (PTO) control shift patterns can be found on a placard or decal on the driver’ s sun visor , on the instrument panel or on the shift control itself. The main transmission control is used to select the various gear ratios or s[...]
-
Страница 116
Allison 2500 This transmission is available with a column-mounted gearshift lever . The gear positions are displayed on the RNDL in the instrument cluster . T o avoid sudden, unexpected vehicle movement and possible personal injury or death: 1. Bring the vehicle to a complete stop. 2. Shift the transmission into N (Neutral). 3. Apply the parking br[...]
-
Страница 117
Allison 3000 series push-button shifter T o shift the transmission into R (Reverse) or D (Drive), depress the brake pedal, then press R or D, then release the brake pedal. T o select a lower range when in D (Drive), press the down-arrow button. T o select a higher range when in D (Drive), press the up-arrow button. T o place the transmission in N ([...]
-
Страница 118
• Never engage the clutch while coasting. Re-engaging the clutch after coasting may not only cause a great shock to the clutch, but the whole drivetrain. Internal engine damage and/or clutch and flywheel failure can result from this. If your vehicle’ s transmission is equipped with a ceramic clutch, you must start the vehicle moving in first ge[...]
-
Страница 119
MANUAL TRANSMISSION OPERATION (IF EQUIPPED) Note: Continued use of a damaged or worn clutch, prolonged clutch slippage or downshifting at excessive speeds can result in a failure of the engine, transmission or clutch components. Note: T o avoid premature clutch wear and failure, do not drive with your foot resting on the clutch pedal or use it to h[...]
-
Страница 120
Shifting with a synchronized transmission W ith the clutch pedal depressed, use 2 (Second) gear synchronizer to stop the clutch disc rotation; this allows smooth engagement of 1 (First) or R (Reverse) T o complete the gear engagement, it may be necessary to apply light pressure to the gearshift lever during initial engagement of the clutch. It take[...]
-
Страница 121
Operating the Eaton FS–5406A, FS–5406N, FS–6406A and FSO–6406A 6-speed transmissions These 6-speed transmissions are equipped with six forward gears and one reverse. All the forward gears are synchronized. The shift pattern is embossed on the gear shift knob. Do not shift the transmission into 1 (First) or R (Reverse) while the vehicle is m[...]
-
Страница 122
T o go forward W ith the engine idling, depress the clutch pedal and shift into 1 (First). Engage the clutch while pressing the accelerator to start forward. Operate the clutch and upshift as required by driving conditions. T o go backward Reverse is obtained by putting the gearshift lever in R (Reverse) and engaging the clutch while pressing light[...]
-
Страница 123
PTO operation while vehicle is moving After the PTO is engaged for driven vehicle operation, shift to the desired range and drive the vehicle. The speed of the PTO, during this period of operation, will always maintain direct relation to vehicle speed. PTO speed will decrease in relation to vehicle (transmission output) speed as shifts to a higher [...]
-
Страница 124
and seals, requiring axle lubrication changes to become more frequent to preserve the axle. Extreme Pressure (EP) lubricants should not be run consistently above 230°F (110°C). Gross axle weight Y our truck has gross axle weight, gross vehicle weight and gross combination weight ratings. Do not exceed these ratings. Exceeding these ratings by ove[...]
-
Страница 125
Some Dana/Spicer drive axles have a driver -controlled differential lock. The differential lock can lock or unlock the differential when the vehicle is moving or stopped. When extra traction is required, the differential lock will provide full power to both axles. When the differential is locked, the vehicle’ s turning radius will increase (vehic[...]
-
Страница 126
These ranges can also be used to provide additional steps between transmission shifts when driving on steep grades and/or fuel economy may be factors. Note: Do not shift between ranges when the speed control is on. Never shift a two-speed axle when descending a steep grade as this may cause loss of vehicle control and result in personal injury . Ax[...]
-
Страница 127
Shifting the axle from HI to LO range - vehicle stopped Place the transmission in N (Neutral), then press the upper part of the switch. Note: Do not shift the axle to LO range with the vehicle in motion. Split-shifting (combined axle and transmission shift - manual transmissions only) Split-shift sequence Ratio combination 1234567891 0 1 1 T ransmi[...]
-
Страница 128
MAXIMUM VEHICLE LOADING Every vehicle manufactured by Ford Motor Company is supplied with information on the Safety Compliance Certification Label, located on either the B-pillar or the driver’ s door edge, listing the maximum loading for the vehicle (GVWR), and its axle systems (GA WR) at the tire to ground interface. Under no circumstances shou[...]
-
Страница 129
When operating empty or lightly loaded, sudden or hard braking may induce wheel lockup with loss of vehicle control and the possibility of accident and serious injury , especially on wet or slippery road surfaces. T RAILER TOWING T owing a trailer places an additional load on your vehicle’ s engine, transmission, axle, brakes, tires and suspensio[...]
-
Страница 130
Safety chains Always connect the trailer’ s safety chains to the frame or hook retainers of the vehicle hitch. T o connect the trailer’ s safety chains, cross the chains under the trailer tongue and allow slack for turning corners. If you use a rental trailer , follow the instructions that the rental agency gives to you. Do not attach safety ch[...]
-
Страница 131
T railer towing tips • Practice turning, stopping and backing up before starting on a trip to get the feel of the vehicle trailer combination. When turning, make wider turns so the trailer wheels will clear curbs and other obstacles. • Allow more distance for stopping with a trailer attached. • If you are driving down a long or steep hill, sh[...]
-
Страница 132
Before hook-up, make sure: • The fifth wheel jaws are fully opened. • The fifth wheel is fully tilted back to prevent body damage when the tractor is backed under a trailer . • The trailer wheels are blocked and the trailer spring brakes are adjusted and applied. Never chase a trailer . • The brake hoses and light cords are clear of the fif[...]
-
Страница 133
5. Disconnect the brake hoses and light cords. Be sure hoses and cords are clear . 6. Pull coupler release lever to disengage the fifth wheel jaws. 7. Release the tractor parking brakes. 8. Pull out from the trailer slowly , allowing the landing gear to take the load gradually . 2008 F-650/750 (f67) Supplement USA (fus) Driving 133[...]
-
Страница 134
GETTING ROADSIDE ASSISTANCE T o fully assist you should you have a vehicle concern, Ford offers a complimentary roadside assistance program. This program is separate from the New V ehicle Limited W arranty and is not applicable to vehicles sold in Canada. The service is available: • 24–hours, seven days a week • for the New V ehicle Limited W[...]
-
Страница 135
HAZARD FLASHER The hazard flasher control is located on the steering column, just behind the steering wheel. The hazard flashers will operate when the ignition is off. Push in the flasher control and all front and rear direction signals will flash. Press the flasher control again to turn them off. Use it when your vehicle is disabled and is creatin[...]
-
Страница 136
Passenger compartment fuse panel Fuse/Relay Location Fuse Amp Rating Fuse Description 1 20A Horn relay 2 15A Flasher 3 20A Cigar lighter 4 10A Diagnostics, Parking brake warning 5 15A Blend door actuator , Climate mode, Back-up lamps, DRL signal, Heated seats, T railer ABS, Exhaust brakes 6 — Not used 7 — Not used 8 5A Radio, GEM 4 9 5A Power w[...]
-
Страница 137
Fuse/Relay Location Fuse Amp Rating Fuse Description 15 10A Interior lamp relay , GEM, V anity mirrors 16 15A High beams, Indicator 17 — Not used 18 5A Headlamp switch interior lighting 19 15A Engine control 20 5A Starting system 21 10A DRL resistor 22 15A Air horn, Air suspension dump, T wo-speed axle, Driver -controlled locking differential 23 [...]
-
Страница 138
T o reduce risk of electrical shock, always replace the cover to the Power Distribution Box before reconnecting the battery or refilling fluid reservoirs. Fuse/Relay Location Fuse Amp Rating Fuse Description 1 15A* Main light switch 2 30A* Power seat (driver) 3 30A* Power seat (passenger) 4 15A* W asher pump relay , W asher pump motor 5 — Not use[...]
-
Страница 139
Fuse/Relay Location Fuse Amp Rating Fuse Description 12 20A* Daytime Running Lamps (DRL), Blend door actuator , Climate mode, Back-up, Heated seats, T railer ABS, Exhaust brake 13 — Not used 14 — Not used 15 7.5A* Body builder - trailer adapter stoplamps 16 5A* Bendix Air ABS (Air brake vehicles only) W ABCO ABS (Hydraulic brake vehicles only) [...]
-
Страница 140
Fuse/Relay Location Fuse Amp Rating Fuse Description 111 30A** Park lamps relay , Park lamps 112 40A** Blower motor relay , Blower motor 113 30A** Heated seats 114 25A** Hydraulic ABS ECU power 115 20A** Ignition switch, Central Junction Box fuses 8, 9, 10 and 11, Starter motor relay 116 30A** Left/Right turn relays, Back-up lamp relay 117 20A** St[...]
-
Страница 141
T railer tow relays (if equipped) Fuse/Relay Location Fuse Amp Rating Description 1 30A* T railer tow ABS feed 2 30A* T railer tow park/marker lamps 3 30A* T railer tow stop lamps 4 30A* T railer tow turn/stop lamps (combined) T railer tow turn lamps (separate) 5 — Not used R1 — T railer tow ABS relay R2 — T railer tow marker lamp relay R3 ?[...]
-
Страница 142
for the engine control module. Refer to Automatic transmission operation in the Driving chapter and Battery in the Maintenance and Specifications chapter for more information. JUMP STARTING The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicle damage. Batteries conta[...]
-
Страница 143
Connecting the jumper cables 1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery . Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery . 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery . 3. Connect the [...]
-
Страница 144
4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle’ s engine, away from the battery and the carburetor/fuel injection system. Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. Do not connect the end of the second cable to the negative (-) terminal of the bat[...]
-
Страница 145
Removing the jumper cables Remove the jumper cables in the reverse order that they were connected. 1. Remove the jumper cable from the ground metal surface. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery . 2. Remove the jumper cable on the negative (-) connection of the booster vehicle’ s batter[...]
-
Страница 146
4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’ s battery . After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions. WRECKER TOWING INSTRUCTIONS Before moving the towed vehicle, check for adequate road [...]
-
Страница 147
Note: T o avoid transmission damage, vehicles should not be towed even a short distance without suspending rear wheels or removing the axle shaft or driveshaft. Note: In the event the chassis is equipped with a tandem axle and the vehicle is to be towed from the front, the forward rear axle may be raised to clear the road surface and secured to the[...]
-
Страница 148
2. Remove the capscrews and washers or stud nuts and washers from flanges of both axle shafts. 3. Loosen the tapered dowels in the flanges of both axle shafts by holding a 1 1 ⁄ 2 inch diameter brass drift or hammer against the axle shaft center and hitting it with a five or six pound hammer . Note: Do not use a chisel or wedge to loosen the axle[...]
-
Страница 149
T owing the vehicle with the rear wheels suspended Note: T o avoid damage to the cab roof or air deflector when towing the vehicle backward (rear wheels suspended) the air deflector must be removed. Whenever possible, it is preferable to tow a disabled vehicle from the rear by raising the rear of the chassis. When towing a vehicle with the rear of [...]
-
Страница 150
GETTING THE SERVICES YOU NEED At home Ford Motor Company and Ford of Canada have authorized dealerships to service your vehicle. It is preferred that you return to the authorized dealer where your vehicle was purchased when warranty repairs are needed. However , you may also take your vehicle to another Ford Motor Company or Ford of Canada dealersh[...]
-
Страница 151
In order to help you service your Ford vehicle, please have the following information available when contacting the Commercial V ehicle Hotline: • Y our telephone number (home and business) • The name of the dealer and the city where the dealership is located • The year and make of your vehicle • The date of vehicle purchase • The current[...]
-
Страница 152
In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126 GETTING ASSISTANCE OUTSIDE THE U.S AND CANADA Before exporting your vehicle to a foreign country , contact the appropr[...]
-
Страница 153
ORDERING ADDITIONAL OWNER ’ S LITERATURE T o order the publications in this portfolio, contact Helm, Incorporated at: HELM, INCORPORA TED P .O. Box 07150 Detroit, Michigan 48207 Or call: For a free publication catalog, order toll free: 1-800-782-4356 Monday-Friday 8:00 a.m. - 6:00 p.m. EST Helm, Incorporated can also be reached by their website: [...]
-
Страница 154
REPORTING SAFETY DEFECTS (CANADA ONLY) If your believe your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform T ransport Canada, using their toll-free number: 1–800–333–0510. 2008 F-650/750 (f67) Supplement USA (fus) Customer Assistance 154[...]
-
Страница 155
W ASHING THE EXTERIOR W ash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, such as Motorcraft Detail W ash (ZC-3–A), which is available from your dealer . • Never use strong household detergents or soap, such as dish washing or laundry liquid. These products can discolor and spot painted surfaces. • Never wash a [...]
-
Страница 156
PAINT CHIPS Y our dealer has touch-up paint and sprays to match your vehicle’ s color . T ake your color code (printed on a sticker in the driver’ s door jam) to your dealer to ensure you get the correct color . • Remove particles such as bird droppings, tree sap, insect deposits, tar spots, road salt and industrial fallout before repairing p[...]
-
Страница 157
• For routine cleaning, use Motorcraft Detail W ash (ZC-3–A). • If tar or grease spots are present, use Motorcraft Bug and T ar Remover (ZC-42). WINDOWS AND WIPER BLADES The windshield, rear and side windows and the wiper blades should be cleaned regularly . If the wipers do not wipe properly , substances on the vehicle’ s glass or the wipe[...]
-
Страница 158
• If grease or tar is present on the material, spot-clean the area first with Motorcraft Spot and Stain Remover (ZC-14). • Never saturate the seat covers with cleaning solution. • Do not use household cleaning products or glass cleaners, which can stain and discolor the fabric and affect the flame retardant abilities of the seat materials. Do[...]
-
Страница 159
Motorcraft Custom Clear Coat Polish (ZC–8–A) Motorcraft Custom Vinyl Protectant (U.S. only) (ZC-40-A) Motorcraft Dash and Vinyl Cleaner (ZC-38–A) Motorcraft Deluxe Leather and Vinyl Cleaner (U.S. only) (ZC-11–A) Motorcraft Detail W ash (ZC-3–A) Motorcraft Dusting Cloth (ZC-24) Motorcraft Engine Shampoo and Degreaser (U.S only) (ZC-20) Mot[...]
-
Страница 160
GENERAL SERVICING GUIDELINES AND PRECAUTIONS As with any machine, care should be taken to avoid being injured when performing maintenance, repairs or system checks. Improper or incomplete service could result in the vehicle not working properly which, in turn, may result in personal injury or damage to the vehicle or equipment. It is the operator?[...]
-
Страница 161
vehicle at least once a year . Remember that regular maintenance and replacement of worn components will usually prevent serious problems from developing later . Making modifications to various parts, components and systems of the vehicle, such as brake and steering systems can adversely affect the quality , reliability and operation of your vehicl[...]
-
Страница 162
Check to make sure that the axle mounting U-bolt nuts, attaching or mounting bolts and nuts are securely tightened. Regularly check front axle for damage, binding, worn parts and adequate lubrication. At regular intervals, or during other scheduled maintenance, (tire rotation/service, wheel bearing service, alignment, etc.) the kingpins should be c[...]
-
Страница 163
non-asbestos, fiberglass, mineral wool, aramid or carbon) may be a potentially serious health hazard. Note: Persons handling brake linings should follow all precautions listed below: 1. Always wear a respirator approved by the National Institute of Occupational Studies of Health (NIOSH) or Mine Safety and Appliance (MSA) during all brake service pr[...]
-
Страница 164
on original equipment chambers now incorporate a stroke indicator to aid in adjustment checks; an orange paint marker near the base of the push rod. If the push rod is clean and the brakes are out of adjustment, the orange marker can be seen protruding from the chamber when the brakes are applied. Do not manually adjust the automatic slack adjuster[...]
-
Страница 165
Air brakes - air dryer Performance of desiccant or after -cooler type air dryers is dependent on climatic conditions in which your vehicle is operating. Maintenance schedules must be established for each specific operation. The use of an air dryer on a vehicle does not eliminate the need to periodically drain the air reservoirs. Air brakes - desicc[...]
-
Страница 166
Note: If brake fluid requires attention to maintain a proper master cylinder level, this is an indication of either severe operation (pad wear) or fluid system leakage. A more frequent and thorough brake inspection will be required. Hydraulic brakes - fluid precautions The HydroMax brake system consists of two completely separate hydraulic systems [...]
-
Страница 167
functioning of the catalytic converter . Also, take precautions not to damage the catalytic converter when servicing your engine or storing your vehicle. Note: If your vehicle is equipped with a catalytic converter/muffler , do not blend waste oil with Diesel fuel. Operate only on ultra low sulfur (less than 15 parts per million sulfur) diesel fuel[...]
-
Страница 168
• Maintain proper steering gear and power steering pump lubricant levels. • Regularly inspect steering column joint bolts and steering linkage, particularly for body-to-chassis clearance. Note: Have any steering problems corrected at once by a qualified service technician. Failure to maintain the steering system in proper condition can cause re[...]
-
Страница 169
T o open the hood: 1. Set the parking brake, shift into N (Neutral) (automatic transmission) or 1 (First) (manual transmission) and turn the engine off. 2. Lift upward on the bottom of each latch. 3. Pull the bottom of each latch away from the fender . 4. T ilt the hood forward until stopped by the retaining cables. 2008 F-650/750 (f67) Supplement [...]
-
Страница 170
T o lower the hood: 1. Push the hood rearward at the top center of the hood above the grille until closed. 2. Engage the latch on each fender . 3. Push down on the bottom of each latch until locked. WINDSHIELD WASHER FLUID The reservoir capacity is 4.0 quarts (3.8L); use windshield washer fluid that meets the Ford specification listed. Refer to Lub[...]
-
Страница 171
CHANGING THE WIPER BLADES T o replace the wiper blades: 1. Pull the wiper arm away from the windshield and lock into the service position. 2. T urn the blade at an angle from the wiper arm. Push the lock pin manually to release the blade and pull the wiper blade down toward the windshield to remove it from the arm. 3. Attach the new wiper to the wi[...]
-
Страница 172
• Battery tray with cover removed. Maintenance-free batteries do not normally require adding additional water . Make sure the battery cover/shield is reinstalled after the battery has been cleaned or replaced. For longer , trouble-free operation, keep the top of the batteries clean and dry . Also, make certain the battery cables are always tightl[...]
-
Страница 173
Keep batteries out of reach of children. Batteries contain sulfuric acid. A void contact with skin, eyes or clothing. Shield your eyes when working near the battery to protect against possible splashing of acid solution. In case of acid contact with skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attent[...]
-
Страница 174
If you drive in extremely hot climates: • It is still necessary to maintain the coolant concentration above 40%. • NEVER decrease the coolant concentration below 40%. • Engine coolant concentrations below 40% will decrease the corrosion protection characteristics of the engine coolant and may cause engine damage. • Engine coolant concentrat[...]
-
Страница 175
FUEL INFORMATION Important safety precautions Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. The fuel system may be under pressure. If the fuel cap is venting vapor or if you hear a hissing sound, wait until it stops before completely removing the cap. Automotive fuels can cause [...]
-
Страница 176
If you must replace the fuel filler cap, replace it with a genuine Ford or Motorcraft part. The customer warranty may be void for any damage to the fuel tank or fuel system if a genuine Ford or Motorcraft fuel filler cap is not used. If you do not use the proper fuel filler cap, excessive pressure or vacuum in the fuel tank may damage the fuel syst[...]
-
Страница 177
Using low sulfur (16-500 ppm) or high sulfur (greater than 500 ppm) diesel fuel in a diesel engine designed to use only Ultra Low Sulfur Diesel fuel increases the likelihood of engine oil dilution with fuel which may lead to major engine damage. Using low sulfur (16-500 ppm) or high sulfur (greater than 500 ppm) diesel fuel in a diesel engine desig[...]
-
Страница 178
Running out of fuel A void running out of fuel as this will allow air to enter the fuel system, which will make restarting the vehicle difficult. If you have run out of fuel: • If your vehicle is equipped with dual fuel tanks, add at least 4–5 gallons (15–19 liters) of fuel to each tank before attempting to restart the engine. • The fuel sy[...]
-
Страница 179
Essentials of good fuel economy Measuring techniques Y our best source of information about actual fuel economy is you, the driver . Y ou must gather information as accurately and consistently as possible. Fuel expense, frequency of fill-ups or fuel gauge readings are NOT accurate as a measure of fuel economy . W e do not recommend taking fuel econ[...]
-
Страница 180
Calculating fuel economy 1. Fill the fuel tank(s) completely and record the initial odometer reading (in miles or kilometers). 2. Each time you fill the tank(s), record the amount of fuel added (in gallons or liters). 3. After at least three to five tank fill-ups, fill the fuel tank(s) and record the current odometer reading. 4. Subtract your initi[...]
-
Страница 181
Conditions • Carrying unnecessary weight may reduce fuel economy . • Fuel economy may decrease with lower temperatures during the first 8–10 miles (12–16 km) of driving. • Flat terrain driving improves fuel economy over hilly roads. • T ransmissions give their best fuel economy when operated in the top cruise gear and with steady pressu[...]
-
Страница 182
Diesel particulate filter regeneration (Cummins engine only) Under most operating conditions, DPF regeneration will be transparent to the operator . A small increase in engine/turbo sound-level is normal during filter regeneration. If, however , your engine is operated for extended periods of time under one of the following conditions, operator ass[...]
-
Страница 183
Instrument cluster lamp(s) will illuminate and/or flash when operator assistance is required. In addition, engine performance will become increasingly limited above Level 1. At Levels 1 and 2, two courses of action may be taken by the operator to facilitate filter regeneration: 1. The vehicle may be driven on the highway at highway speeds, 2. The o[...]
-
Страница 184
When these steps are performed successfully in the order outlined above, the DPF lamp will begin flashing at a rate of once every 10 seconds. The engine speed may also increase slightly . T o allow parked regeneration to continue uninterrupted: 1. The vehicle must remain parked 2. The transmission must remain in P (Park) or N (Neutral) (as previous[...]
-
Страница 185
The exhaust outlet assembly on your vehicle is a uniquely functioning device that accompanies the DPF assembly . It is designed to help control the temperature of the exhaust during the DPF regeneration process. Do not modify or remove this device. Modification of the system and/or additions of aftermarket devices can reduce the effectiveness of th[...]
-
Страница 186
• Check for proper operation of radiator shutters, if equipped. The shutters should be open during normal operating temperatures. Engine and Driveline System • T ransmission Enclosure: inspect for cracks, holes, and tears. Clean any deposits such as oil, dirt, and stones. • Engine valve covers and block covers are made to damp out engine mech[...]
-
Страница 187
• If the fluid temperature is at approximately 68°-120°F (20°-49°C) ( fluid cool or warm to the touch ), check the COLD side of the dipstick. The fluid level should be within the FULL range • If the fluid level is below the ADD line, add fluid in small amounts, continuously checking the level until it reaches the proper level. • If the fl[...]
-
Страница 188
BRAKE FLUID Check and refill the HydroMax brake fluid reservoir using the following procedure. Refer to the Scheduled Maintenance Guide chapter for the service interval. 1. Clean the reservoir caps before removal to prevent dirt or water from entering the reservoir . 2. Visually inspect the fluid level; the level should be at the bottom of the fill[...]
-
Страница 189
Use only a DOT 3 brake fluid designed to meet manufacturer specifications. Refer to Lubricant specifications in this chapter . Carefully read cautionary information on product label. For MEDICAL EMERGENCY INFORMA TION, contact a physician or Poison Control Center immediately; on Ford-Motorcraft products call: 1-800-959-3673 (FORD). Failure to follo[...]
-
Страница 190
• T ransmission and clutch removed for clarity . 3. W ith a grease gun, lubricate the clutch release bearing (at one location) and the clutch release shaft (at two locations) using the grease fittings provided. 4. Lubricate clutch release wear pads at the two locations where they contact the clutch release bearing using a brush or similar tool. 5[...]
-
Страница 191
3. W ith the parking brake engaged and your foot on the brake pedal, start the engine and move the gearshift lever through all of the gear ranges. Allow sufficient time for each gear to engage. 4. Place the gearshift lever in N (Neutral) or P (Park) and leave the engine running. 5. Remove the dipstick, wiping it clean with a clean, dry lint free ra[...]
-
Страница 192
Drain and refill your transmission fluid using the following procedure: 1. Drain the transmission while the fluid is warm. 2. Park the vehicle on level ground. 3. Set the parking brake and shift into 1 (First) and turn the engine off. 4. Clean any dirt from around the filler and drain plugs. 5. Remove the filler and drain plugs and drain the fluid [...]
-
Страница 193
such as the fuel sender , cranking motor , alternator and feed-through studs should be cleaned and re-coated with a lubricant sealing grease such as Motorcraft Silicone Brake Caliper Grease and Dielectic Compound XG-3, or equivalent. This should include the ground cable connector for batteries, engine and cab as well as the jump starting stud. Acce[...]
-
Страница 194
Supporting your vehicle for service When performing service repairs on your vehicle, first prepare the vehicle by doing the following: 1. Park the vehicle on a level concrete floor . 2. Set the parking brake and block the wheels to prevent the vehicle from moving. 3. Select a jack with a rated capacity sufficient to lift and hold up the vehicle. 4.[...]
-
Страница 195
Air suspension U-bolt checks and re-torquing procedures 1. Inspect the threads of the U-bolt and nut for rust and debris. Clean the threads if contaminated. 2. Using a torque wrench, determine if any nuts can be turned with a force below the specified torque. 3. Using the lowest discovered torqued nut as a starting point, retighten the nuts using t[...]
-
Страница 196
Y our rear axle may be filled with an optional synthetic lubricant which allows the use of extended service intervals. A tag on the filler plug will identify the use of the synthetic lubricant. Use only a lubricant that meets manufacturer specifications (refer to Lubricant specifications in this chapter). Use of a non-approved rear axle lubricant m[...]
-
Страница 197
When installing wheel balance weights, they must be mounted on the dome-side of the wheel only . Failure to do so may result in loss of wheel weight and/or damage to brakes or wheels. Important: Remember to replace the wheel air valves when the road tires are replaced at the end of their useful life. Oil lubricated front wheel bearings During norma[...]
-
Страница 198
Use the following installation procedure: 1. Slide inner rear or front tire and wheel in position over studs and push it back as far as possible. Use care so that the threads on studs are not damaged. Disc wheel with flange nuts (hub-piloted) Front wheel mounting of flange nut system 1. Flange nut 2. Wheel(s) 3. Brake drum 4. Wheel stud (22 mm) 5. [...]
-
Страница 199
Aluminum rear disc wheel with flange nuts (hub-piloted) 1. Flange nut 2. Wheel(s) 3. Brake drum 4. Wheel stud (22 mm) 5. Wheel hub 6. Wheel locator pad Note for aluminum wheels: Prior to re-installing rear aluminum hub-piloted wheels, clean each wheel locator pad on the hub from all dirt, rust and foreign material. Apply a light coat of chassis gre[...]
-
Страница 200
Wheel tightening sequence: 8–lug wheel 10–lug wheel 5. Continue tightening the nuts to the torque specifications in the torque chart using the same crisscross sequence shown. 6. After operating the vehicle approximately 50 miles (80 km), check the nuts for tightness. Some natural seating of parts may be encountered and the torque on the nuts wi[...]
-
Страница 201
Use only the same type and style wheels and mounting hardware to replace original parts. Failure to do so may result in an assembly that looks fine, but does not fit together properly . This could possibly cause wheel or fastener failures which could result in property damage, personal injury or death. Note: Do not attempt to mix stud-piloted wheel[...]
-
Страница 202
T o avoid personal injury or death, always follow these instructions when mounting radial tires on wheels: • Only personnel that have had proper training and experience should mount or remove tires from rims or wheels. • Use only heavy-duty rims or approved rims for radial tires. It may be necessary to contact your wheel and rim distributor to [...]
-
Страница 203
All tires with Steel Carcass Plies (if equipped): This type of tire utilizes steel cords in the sidewalls. As such, they cannot be treated like normal light truck tires. T ire service, including adjusting the air pressure, must be performed by personnel trained, supervised and equipped according to Federal Occupational Safety and Health Administrat[...]
-
Страница 204
Stay out of the trajectory (1) as indicated in the illustration. Do not mount tube type tires on tubeless wheels or tubeless tires on tube type wheels. T o do so could result in tire or wheel failure and cause property damage, personal injury or death. Preserving proper inflation pressure is a very important maintenance practice to insure safe vehi[...]
-
Страница 205
T ires should be properly inflated to manufacturers recommended pressure for the size and service load in which the vehicle is being used. Refer to the tire manufacturer in which your vehicle is equipped for the latest information concerning service load and inflation pressure. It is particularly important to keep moisture from the inside of tires,[...]
-
Страница 206
Loads Loading tires beyond their rated capacity decreases tire life requiring more frequent replacement of tires. Overloading creates an unsafe condition that may result in sudden air loss from a tire failure resulting in an accident that could cause property damage, personal injury or death. Note: Y our GA W/GVW rating is correct at the time of yo[...]
-
Страница 207
If rib tire is used on front axle and lug or off-road type on rear axle positions: 1. Front (Steering) Axle: Replace tires at front wheels when tread is worn to 4/32 inch (3 mm) or less. 2. Rear Axles: T ires must be removed when the tread is worn to 2/32 inch (2 mm) or less. T ires identified with the word “re-groovable” molded on the sidewall[...]
-
Страница 208
Rotating tires from one wheel position to another is a way often used to even out many types of irregular wear or to avoid it altogether . Some of the more effective tire rotation programs are: • Steer tires that have developed some type of irregular wear pattern can be rotated to drive axles if rib tires are being used on all wheel positions. Ap[...]
-
Страница 209
LUBRICANT SPECIFICATIONS Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Non-driving front axle Eaton-Spicer axle (generic) - front axle wheel bearing oil Multipurpose EP gear lube of API GL-5 quality meeting MIL-PRF-2105E specifications including synthetic lubricants. Do not mix conventional a[...]
-
Страница 210
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Spicer axle - front axle wheel bearing oil Multipurpose EP gear lube of API GL-5 quality meeting MIL-PRF-2105E specifications including synthetic lubricants. Do not mix conventional and synthetic lubricants. SAE 75W : –40°F to 32°F (–40°C t[...]
-
Страница 211
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Eaton-Spicer axle, Spicer axle - Front axle wheel bearing grease, tie rod ends, drag link, kingpin and bushing EP2 Lithium complex-based moly grease (or equivalent) GC/LB NLGI #2 multi-purpose lithium complex grease Note: Eaton-Spicer and Meritor [...]
-
Страница 212
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Steering column U-joints / slip joint GC/LB NLGI #2 lithium complex-based moly grease or multi-purpose lithium complex grease — Motorcraft Premium Long Life Grease / XG-1-C Driveshaft U-joint GC/LB NLGI #2 lithium complex-based moly grease or mu[...]
-
Страница 213
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Cooling system Engine coolant Refer to engine operator’ s manual W indshield washer W asher fluid WSB-M8B16-A2 — Motorcraft Premium W indshield W asher Concentrate / ZC-32-A T ransmission Eaton-Fuller Petroleum oil: Engine oil API-SL or API-CF[...]
-
Страница 214
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Spicer (non- synchronized) (lubricants are listed in order of preference) Petroleum oil: Engine oil API-SL or API-CF (MIL-L-2104E or MIL-L-46152E) SAE 50: above 0°F (–18°C) — SAE 40: below 0°F (–18°C) — Mineral gear oil: API-GL-1 (rust[...]
-
Страница 215
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Spicer (synchronized) (lubricants are listed in order of preference) Petroleum oil: Engine oil API-SL or API-CF (MIL-L-2104E or MIL-L-46152E) SAE 50: above 10°F (–12°C) — SAE 40: below 10°F (–12°C) — Mineral gear oil: API-GL-1 (rust an[...]
-
Страница 216
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Meritor Petroleum oil: Heavy Duty Engine Oil MIL-L-2104E or API-SL or API-CF (previous API designations acceptable) SAE 50: above 10°F (–12°C) — SAE 40: above 10°F (–12°C) — SAE 30: below 10°F (–12°C) Motorcraft SAE 30 Super Duty M[...]
-
Страница 217
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Allison Refer to transmission operator’ s manual Rear axle Eaton-Spicer - two-speed axle RHEOLUBE 362 (or equivalent) (Eaton part number 113741) —— 2008 F-650/750 (f67) Supplement USA (fus) Maintenance and Specifications 217[...]
-
Страница 218
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Eaton - single-speed axle Generic lubricant SAE 75W : –40°F to –15°F (–40°C to –26°C) Motorcraft SAE 75W -140 Motorcraft Synthetic Rear Axle Lubricant / XY–75W140–QL SAE 75W -80: –40°F to 80°F (–40°C to 27°C) SAE 75W -140: [...]
-
Страница 219
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Spicer - single-speed axle Multipurpose EP gear lube of API GL-5 quality meeting MIL-PRF-2105E specifications including synthetic lubricants SAE 75W : –40°F to 32°F (–40°C to 0°C) Motorcraft SAE 75W -140 Motorcraft Synthetic Rear Axle Lubr[...]
-
Страница 220
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Meritor - single-speed axle Fill at the factory with Synthetic SAE 75W -140, will have a tag attached to fill plug that reads as follows: “Filled with synthetic lube. Do not mix.” —— Multipurpose EP gear lube of API GL-5 quality meeting MI[...]
-
Страница 221
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Cab components Hydraulic lift pump fluid Dexron III — Motorcraft MERCON 威 Multi-Purpose (A TF) T ransmission Fluid / XT -2-QDX Cab latch and lock levers Mobile SHC 32 Low T emperature Lubricant (or equivalent) —— Cab latch pivots; Door che[...]
-
Страница 222
Component Lubrication type V iscosity / Ambient temperature / Notes Equivalent Ford part name / number Door window regulators NGLI #2 multipurpose lithium complex grease — Motorcraft Multi-Purpose Grease Spray / XL-5 or Motorcraft Multi-Purpose Grease / XG-4 W eatherstripping Silicone lubricant — Motorcraft Silicone Spray / XL-6 Engine oil Refe[...]
-
Страница 223
Axle code W eight capacity - lb. (kg) Description Fluid capacity - pints (liters) 1,2 17060S 17500 (7938) Single rear axle, single reduction 28.0 (13.2) 19055T 17500 (7938) Single rear axle, two-speed 28.0 (13.2) M190T 19000 (8618) Single rear axle, two-speed 35.0 (17.0) 19060S 19000 (8618) Single rear axle, single reduction 28.0 (13.2) 21060S 2100[...]
-
Страница 224
Engine coolant and oil Engine type Engine coolant (approximate capacity) * Engine oil (approximate capacity) Caterpillar 57.0 pints (27.0L) Refer to engine operator’ s manual. Cummins 52.0 pints (24.6L) * Add the coolant type originally equipped in your vehicle. Power steering system Steering gear Power steering fluid volume T AS40 17.6 pints T A[...]
-
Страница 225
Fuel tanks Standard tanks are listed as such; all other tanks available for your vehicle are optional equipment. V ehicle T ank type Gallons (Liters) F-650 Low Profile (standard), F-650 Dock Height Single, steel rectangular 35 (132) F-650 Low Profile, F-650 Dock Height (standard), F-750 Pick-up and Delivery (standard), F-750 Severe Service (standar[...]
-
Страница 226
V ehicle T ank type Gallons (Liters) F-650 Low Profile, F-650 Dock Height, F-750 Pick-up and Delivery , F-750 Severe Service Dual, steel rectangular 45(RH)/65(LH) (170[RH]/246[LH]) F-650 Low Profile, F-650 Dock Height, F-750 Pick-up and Delivery , F-750 Severe Service Dual, steel rectangular 65/65 (246/246) F-650 Dock Height, F-750 Pick-up and Deli[...]
-
Страница 227
GENERAL MAINTENANCE INFORMATION The general maintenance services listed in this section are required because they are considered essential to the life and performance of your vehicle. Refer to the “Daily Owner Checks” chart for important maintenance items. Ford Motor Company recommends you perform the owner maintenance services listed in this s[...]
-
Страница 228
remanufactured parts are used for maintenance replacements (or for the service) of components effecting the emission control, the owner should be ensured that such parts are warranted by their manufacturer to be equivalent to genuine Ford Motor Company Parts in performance and durability . Please consult your warranty information booklet for comple[...]
-
Страница 229
FACTORY AUTHORIZED SYSTEMS CHECKS In the event that your vehicle experiences a component related concern, please contact your Ford dealership. The Ford Motor Company T rained T echnicians who work at Ford dealerships are specifically trained to understand your vehicle. A proper repair begins with a thorough system check. A Factory Authorized System[...]
-
Страница 230
A void driving your vehicle if it does not operate properly . If the engine diesels (more than five seconds of engine run-on after shut-off), misfires, surges, stalls or backfires, see your dealer . Be alert for fluid leakage, odor , smoke, loss of oil pressure, or charge indicator or over temperature warning. Do NOT use diesel fuel blended with wa[...]
-
Страница 231
Among those acts presumed to constitute tampering are the following acts listed: V ehicle System Acts Acoustical Shielding Removal of noise shields, hood blanket, tunnel liner or acoustical absorptive material. Engine Removal or rendering inoperative the engine speed governor so as to allow engine speed to exceed manufacturer specifications. Remova[...]
-
Страница 232
MAINTENANCE Instructions for maintenance and service of the noise control system have been included in the required maintenance services and in the general maintenance section. T o further help minimize noise emissions degradation throughout the life of the vehicle, Ford Motor Company recommends that this vehicle should be operated in the manner de[...]
-
Страница 233
AIR BRAKE ADJUSTMENT Failure to maintain proper air brake adjustment can result in reduction or loss of braking ability . Air brake inspection and adjustment or repairs should be performed by a qualified service technician in accordance with the instructions in the service manual. Cam brakes - automatic slack adjusters Inspect standard air brakes e[...]
-
Страница 234
SCHEDULED MAINTENANCE GUIDE MAINTENANCE SERVICES AND RECORD RETENTION The maintenance record form which follows is for your convenience. In addition to recording the services performed, you should retain copies of your receipts for the services. You also should keep records of any emission control systems maintenance services performed on your vehi[...]
-
Страница 235
Daily owner checks Engine Check the air filter restriction gauge. Check the engine oil. Inspect the coolant level Brake system Check the air brake system reservoir automatic drain valve operation. Drain the air brake system reservoir - manual valve. T ransmission system Visually check the automatic transmission for fluid leakage. Steering system Ch[...]
-
Страница 236
Check every oil change Engine system Check the engine cooling system - hoses, clamps and protection*. Inspect the drive belts. Exhaust system Inspect the entire exhaust system (including the inlet pipe(s), muffler(s), outlet pipe(s), clamps and fasteners) for holes, leakage, breakage, corrosive damage and separation from other components. Adjust, s[...]
-
Страница 237
Check every oil change Steering system Lubricate the steering shaft(s), U-joints and splines when equipped with grease fittings. Lubricate the front axle spindle pins. Lubricate the steering linkage when equipped with grease fittings. Grease the power steering gear output shaft. * Coolant protection checks should be made just prior to the onset of [...]
-
Страница 238
Maintenance Operation Frequency - Observation Check the engine performance and the engine governor Excessive engine noise. Inspect the fan, the fan shroud, and the fan clutch Engine overheats, fan runs at high speed constantly , excessive fan noise, or fan wobble due to worn bearings. Check for operation of ABS warning lamp At each engine start up.[...]
-
Страница 239
Maintenance Operation Frequency - Observation Check the battery terminals for corrosion Whenever electrical power supply has diminished. T ighten the wheel mounting nuts to the specified torque. Refer to Wheels in the Maintenance and Specifications chapter Required initially at 500 and 1000 miles (800 and 1600 km). Perform again at 500 and 1000 mil[...]
-
Страница 240
ON-HIGHW A Y - 60,000 MILES (96,000 KM) OR MORE ANNUALL Y (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 15 30 45 60 75 90 105 120 135 150 Kilometers (x 1000) 24 48 72 96 120 144 168 192 216 240 Months 3 6 9 12 15 18 21 24 27 30 Non-driving front axle Wheel bearing - oil type - check level •••••••••• Wheel[...]
-
Страница 241
ON-HIGHW A Y - 60,000 MILES (96,000 KM) OR MORE ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 15 30 45 60 75 90 105 120 135 150 Kilometers (x 1000) 24 48 72 96 120 144 168 192 216 240 Months 3 6 9 12 15 18 21 24 27 30 Driveshaft SPL U-joint - lubricate Every 100,000 miles (160,000 km) or six months, whi[...]
-
Страница 242
ON-HIGHW A Y - 60,000 MILES (96,000 KM) OR MORE ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 15 30 45 60 75 90 105 120 135 150 Kilometers (x 1000) 24 48 72 96 120 144 168 192 216 240 Months 3 6 9 12 15 18 21 24 27 30 Eaton-Fuller manual transmission - synthetic oil change Factory fill w/synthetic at 50[...]
-
Страница 243
ON-HIGHW A Y - 60,000 MILES (96,000 KM) OR MORE ANNUALL Y (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 165 180 195 210 225 240 255 270 285 300 Kilometers (x 1000) 264 288 312 336 360 384 408 432 456 480 Months 33 36 39 42 45 48 51 54 57 60 Non-driving front axle Wheel bearing - oil type - check level •••••••?[...]
-
Страница 244
ON-HIGHW A Y - 60,000 MILES (96,000 KM) OR MORE ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 165 180 195 210 225 240 255 270 285 300 Kilometers (x 1000) 264 288 312 336 360 384 408 432 456 480 Months 33 36 39 42 45 48 51 54 57 60 Driveshaft SPL U-joint - lubricate Every 100,000 miles (160,000 km) or si[...]
-
Страница 245
ON-HIGHW A Y - 60,000 MILES (96,000 KM) OR MORE ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 165 180 195 210 225 240 255 270 285 300 Kilometers (x 1000) 264 288 312 336 360 384 408 432 456 480 Months 33 36 39 42 45 48 51 54 57 60 Eaton-Fuller manual transmission - synthetic oil change Factory fill w/sy[...]
-
Страница 246
CITY - 60,000 MILES (96,000 KM) OR LESS ANNUALL Y (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 10 20 30 40 50 60 70 80 90 100 Kilometers (x 1000) 16 32 48 64 80 96 112 128 144 160 Months 3 6 9 12 15 18 21 24 27 30 Non-driving front axle Wheel bearing - oil type - check level •••••••••• Wheel bearing - oi[...]
-
Страница 247
CITY - 60,000 MILES (96,000 KM) OR LESS ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 10 20 30 40 50 60 70 80 90 100 Kilometers (x 1000) 16 32 48 64 80 96 112 128 144 160 Months 3 6 9 12 15 18 21 24 27 30 Driveshaft SPL U-joint - lubricate Every 25,000 miles (40,000 km) or six months, whichever comes fi[...]
-
Страница 248
CITY - 60,000 MILES (96,000 KM) OR LESS ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 10 20 30 40 50 60 70 80 90 100 Kilometers (x 1000) 16 32 48 64 80 96 112 128 144 160 Months 3 6 9 12 15 18 21 24 27 30 Rear axle Fluid level - check •••••••••• Eaton / Dana / Spicer petroleum oil - [...]
-
Страница 249
CITY - 60,000 MILES (96,000 KM) OR LESS ANNUALL Y (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 110 120 130 140 150 160 170 180 190 200 Kilometers (x 1000) 176 192 208 224 240 256 272 288 304 320 Months 33 36 39 42 45 48 51 54 57 60 Non-driving front axle Wheel bearing - oil type - check level •••••••••• [...]
-
Страница 250
CITY - 60,000 MILES (96,000 KM) OR LESS ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 110 120 130 140 150 160 170 180 190 200 Kilometers (x 1000) 176 192 208 224 240 256 272 288 304 320 Months 33 36 39 42 45 48 51 54 57 60 Driveshaft SPL U-joint - lubricate Every 25,000 miles (40,000 km) or six months, [...]
-
Страница 251
CITY - 60,000 MILES (96,000 KM) OR LESS ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 110 120 130 140 150 160 170 180 190 200 Kilometers (x 1000) 176 192 208 224 240 256 272 288 304 320 Months 33 36 39 42 45 48 51 54 57 60 Eaton-Fuller manual transmission - synthetic oil change • Rear axle Fluid level[...]
-
Страница 252
SEVERE SER VICE - ON/OFF ROAD IN DIR TY CONDITIONS OR 20,000 MILES (32,000 KM) OR LESS ANNUALL Y (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 5 10 15 20 25 30 35 40 45 50 Kilometers (x 1000) 8 16 24 32 40 48 56 64 72 80 Months 3 6 9 12 15 18 21 24 27 30 Non-driving front axle Wheel bearing - oil type - check level •••[...]
-
Страница 253
SEVERE SER VICE - ON/OFF ROAD IN DIR TY CONDITIONS OR 20,000 MILES (32,000 KM) OR LESS ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 5 10 15 20 25 30 35 40 45 50 Kilometers (x 1000) 8 16 24 32 40 48 56 64 72 80 Months 3 6 9 12 15 18 21 24 27 30 Driveshaft - SPL Slip joint - inspect boot Every 25,000 mil[...]
-
Страница 254
SEVERE SER VICE - ON/OFF ROAD IN DIR TY CONDITIONS OR 20,000 MILES (32,000 KM) OR LESS ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 5 10 15 20 25 30 35 40 45 50 Kilometers (x 1000) 8 16 24 32 40 48 56 64 72 80 Months 3 6 9 12 15 18 21 24 27 30 Rear axle Fluid level - check •••••••••?[...]
-
Страница 255
SEVERE SER VICE - ON/OFF ROAD IN DIR TY CONDITIONS OR 20,000 MILES (32,000 KM) OR LESS ANNUALL Y (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 55 60 65 70 75 80 85 90 95 100 Kilometers (x 1000) 88 96 104 112 120 128 136 144 152 160 Months 33 36 39 42 45 48 51 54 57 60 Non-driving front axle Wheel bearing - oil type - check l[...]
-
Страница 256
SEVERE SER VICE - ON/OFF ROAD IN DIR TY CONDITIONS OR 20,000 MILES (32,000 KM) OR LESS ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 55 60 65 70 75 80 85 90 95 100 Kilometers (x 1000) 88 96 104 112 120 128 136 144 152 160 Months 33 36 39 42 45 48 51 54 57 60 Driveshaft SPL Slip joint - inspect boot Ever[...]
-
Страница 257
SEVERE SER VICE - ON/OFF ROAD IN DIR TY CONDITIONS OR 20,000 MILES (32,000 KM) OR LESS ANNUALL Y (Continued) (Miles, kilometers or months - whichever occurs first) Miles (x 1000) 55 60 65 70 75 80 85 90 95 100 Kilometers (x 1000) 88 96 104 112 120 128 136 144 152 160 Months 33 36 39 42 45 48 51 54 57 60 Eaton-Fuller manual transmission - synthetic [...]
-
Страница 258
Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: 2008 F-650/750 (f67) Supplement USA (fus) Scheduled Maintenanc[...]
-
Страница 259
Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: 2008 F-650/750 (f67) Supplement USA (fus) Scheduled Maintenanc[...]
-
Страница 260
Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: 2008 F-650/750 (f67) Supplement USA (fus) Scheduled Maintenanc[...]
-
Страница 261
Date: Odometer reading: R.O.# Dealer’s Stamp: Date: Odometer reading: R.O.# Dealer’s Stamp: 2008 F-650/750 (f67) Supplement USA (fus) Scheduled Maintenance Guide 261[...]
-
Страница 262
A Air conditioning ..........................45 manual heating and air conditioning system ................. 45 Air suspension ........................... 113 Anti-lock brake system (see Brakes) .............................. 111 Audio system (see Radio) ......................32, 34, 38 Automatic transmission ............115 fluid, adding .........[...]
-
Страница 263
temperature gauge ................... 27 Cruise control (see Speed control) .................... 57 Customer Assistance ........134, 150 Ford accessories for your vehicle ..................................... 158 Getting assistance outside the U.S. and Canada ......150, 152 Getting roadside assistance ... 134 Getting the service you need ..........[...]
-
Страница 264
speedometer ............................. 27 tachometer ................................ 27 trip odometer ............................ 27 H Hazard flashers ......................... 135 Headlamps ................................... 47 aiming ........................................48 daytime running lights .............47 high beam ................[...]
-
Страница 265
Parking brake ...................... 93, 100 warning light ............................. 21 Power door locks ........................61 Power mirrors .............................56 Power point .................................53 Power steering ..........................168 fluid, checking and adding .... 186 fluid, refill capacity ................[...]
-
Страница 266
fluid, refill capacities ..............224 lubricant specifications .......... 209 manual operation ....................119 T urn signal .................................. 48 V V ehicle loading .......................... 128 V oltmeter (see Battery voltage gauge) ...... 27 W W arning chimes ...........................21 W arning lights (see Lights)[...]
-
Страница 267
267[...]
-
Страница 268
268[...]
-
Страница 269
269[...]
-
Страница 270
270[...]
-
Страница 271
271[...]
-
Страница 272
272[...]