Fostex MR-8HD/CD инструкция обслуживания

8588 086 000 (449478) MR-8HD/CD Supplementary manual Ho w to use the CD-R/R W drive This manual is supplement of the MR-8HD/CD owner's manual. It describes how to use the CD-R/RW drive built in the MR-8HD/CD, as well as an external CD-R/RW drive connected to the [USB HOST] port of the MR-8HD/CD. Before you use a CD-R/RW drive, read this supple[...]

MR-8HD/CD Supplementary manual T able of contents Please read bef ore using ..........................................................................................3 Usable discs .....................................................................................................3 Handling of discs ................................................[...]

MR-8HD/CD Supplementary manual Before using the internal CD-R/RW drive of the MR-8HD/CD (or an external CD-R/RW drive), read the following. Usable discs Only discs with any of the following logos can be used with the internal CD-R/RW drive of the MR-8HD/CD (or an external CD-R/RW drive connected to the MR-8HD/CD [USB HOST] port). Recordable ReWrita[...]

MR-8HD/CD Supplementary manual T rac k data whic h can be recorded to a CD-R/R W disc You can record a stereo WAV file converted from two mono files on tracks 7 and 8 (final mixed-down files) to a CD-R/RW disc in the CD-DA format. Mixed-down files on tracks 7 and 8 can be created by in either of the following track bouncing methods. (1) Bouncing tr[...]

MR-8HD/CD Supplementary manual Bef ore creating an audio CD (playing bac k a stereo W A V file) The unit provides the " 2 MIX file playbac k mode ". In this mode, you can playback a stereo WAV file converted for creating an audio CD in the CD-DA format. You can not only check the file but also set CUE points for track division. <Note&g[...]

MR-8HD/CD Supplementary manual Pla ying bac k a stereo W A V file While the Home screen of the " 2 MIX file playbac k mode " is shown, pressing the [PLAY] key plays back the stereo WAV file. The L and R channels of the stereo WAV file are assigned to tracks 1 and 2 respectively. The L and R playback levels of the stereo WAV file are contr[...]

MR-8HD/CD Supplementary manual 1) While the unit is stopped, press the [ST ORE] key . The display now shows the CUE list screen. <Note>: The distance between two adjacent CUE points must be over four seconds. If you attempt to set a new CUE point within four sec- onds after or before another existing CUE point, "Error Overlap Position!&q[...]

MR-8HD/CD Supplementary manual You can edit a CUE position (time) by fol- lowing the procedure below, which is simi- lar to the procedure for entering a CUE la- bel as described above. The following as- sumes that the CUE list screen is shown. 1) Use the [MENU/ENTER] knob to select the CUE you want to edit and press the [MENU/ENTER] knob. 2) Use th[...]

MR-8HD/CD Supplementary manual Creating an audio CD using the internal CD-R/R W drive Using the internal CD-R/RW drive, you can burn a stereo WAV file in the " 2 MIX folder " to a CD-R/RW disc for creating an audio CD in the CD-DA format. By finalizing a burned disc, you can play it back by a common CD player. MIN MAX 10 0 LR 10 0 LR 10 0[...]

MR-8HD/CD Supplementary manual About "T rac k at once" and "Disk at once" The MR-8HD/CD provides two burning modes for creating an audio CD in the CD-DA format. "T rack at once" The unit burns a stereo WAV file to a CD-R/RW disc as a track. You can burn an additional track at a later time until the disc is finalized. E[...]

MR-8HD/CD Supplementary manual <Note>: When more than one stereo WA V file is stored in the "2 MIX folder" (as shown in the example below), you can use the [MENU/EN- TER] knob to select a desired file for "CD Burn" (The maximum number of displayed files in the list is ten). 6) Use the [MENU/ENTER] knob to select the desire[...]

MR-8HD/CD Supplementary manual 9) Use the [MENU/ENTER] knob to select “[EXECUTE]” and press the [MENU/ENTER] knob. The display now shows the status of finalizing. When finalizing is completed, " Completed! " is shown and the disc is automatically ejected from the CD-R/RW drive. <Note>: Once you finalize a disc written in the &qu[...]

MR-8HD/CD Supplementary manual Viewing the T OC inf ormation You can view the TOC information of a burned disc both before finalizing and after finalizing (for a disc burned by " Disk at once ", you can view the TOC only after finalizing, of course). It is recommended to check the remaining time (the recordable time left) from the TOC inf[...]

MR-8HD/CD Supplementary manual Vie wing the T OC information after finalizing The following assumes that a disc automatically finalized after " Disk at once " writing or a disc finalized after " T rack at once " writing is ejected from the internal CD-R/RW drive, while the display shows the CD-RW menu screen where " CD Fina[...]

MR-8HD/CD Supplementary manual Impor ting trac k data on a CD-D A disc You can import (copy) track data on a CD-DA (audio CD) disc (including a commercially available audio CD) to a stereo track pair (1/2, 3/4, 5/6 or 7/8) of the currently loaded song. When importing track data, data is converted to a pair of mono WAV files. In the following descri[...]

MR-8HD/CD Supplementary manual 4) Use the [MENU/ENTER] knob to select "Source CD TNO=**" and press the [MENU/ENTER] knob. You can now select the desired track number of the CD-DA disc. 5) Use the [MENU/ENTER] knob to select the desired track number and press the [MENU/ENTER] knob. The display now highlights " Source CD TNO=** ".[...]

MR-8HD/CD Supplementary manual MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC REC SELECT 01 0 1 2 3 4 5/6 MASTER MAX MAX MIN MIN 7/8 LOCATE REC END A-B PLAY LOCATE ABS ZERO PLAY STOP RECORD REWIND F FWD GUIDE RHYTHM CONTRAST 1-8 > SONG NEW 1-6 > 7/8 1-4 > 5/6 STEREO WAV FILE BOUNCE POWERFUL MASTERING B / OU[...]

MR-8HD/CD Supplementary manual 3) Use the [MENU/ENTER] knob to select "Song Export " and press the [MENU/ENTER] knob. The display now shows the screen for setting the start time, end time and exported tracks. The display now highlights “ [EXECUTE] ”. By default, these items are set as follows. • Start time: The beginning of a song ([...]

MR-8HD/CD Supplementary manual MIN MAX 10 0 LR 10 0 LR 10 0 LR R L MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC REC SELECT 01 0 1 2 3 4 5/6 MASTER MAX MAX MIN MIN 7/8 LOCATE REC END A-B PLAY LOCATE ABS ZERO PLAY ST OP RECORD REWIND F FWD GUIDE RHYTHM CONTRAST 1-8 > SONG NEW 1-6 > 7/8 1-4 > 5/6 STEREO WAV FILE BOUNCE POWERFUL MASTERING B / O[...]

MR-8HD/CD Supplementary manual 1) While the unit is stopped, press the [MENU/ENTER] knob to enter the MENU mode. The display now shows the first page of the menu selection screen. 2) Use the [MENU/ENTER] knob to select "CD-R W " on the second page and press the [MENU/ENTER] knob. The display now shows the CD-RW menu screen. 3) Use the [ME[...]

MR-8HD/CD Supplementary manual The following procedure shows how to set a file to be imported to " TR06 ". To set a file to " TR07 " or " TR08 ", follow the similar procedure. 1) Use the [MENU/ENTER] knob to select "TR06" and press the [MENU/ENTER] knob. The display now shows the screen for selecting a file t[...]

MR-8HD/CD Supplementary manual INPUT A SEL USB USB HOST AC-IN DIGITAL OUT FOOT SW MIDI OUT GTR CLEAN MIC/LINE GTR DIST Impor tant! CD-R/R W drives whic h can be connected to the MR-8HD/CD You can connect the MR-8HD/CD [USB HOST] port to any CD-R/RW drive which has a [USB] port and can be powered by AC main or batteries. The MR-8HD/CD does not provi[...]

MR-8HD/CD Supplementary manual 1) Connect the MR-8HD/CD to the CD-R/R W drive using a USB cable. 2) While the MR-8HD/CD is stopped, press the [MENU/ENTER] knob to enter the MENU mode. The display now shows the first page of the menu selection screen. 3) Use the [MENU/ENTER] knob to select "USB HOST " on the second page and press the [MENU[...]

MR-8HD/CD Supplementary manual 6) Use the [MENU/ENTER] knob to select the desired W A V file and press the [MENU/ENTER] knob. The unit starts writing the file to the CD-R/RW disc. Depending on the selected burning mode, either of the following screens is shown. While the unit is writing data to the disc, " Writing... " is popped up and &q[...]

MR-8HD/CD Supplementary manual 10) Press the [MENU/ENTER] knob. The display returns to the USB HOST menu screen, where " CD Finalize " is highlighted. 9) Use the [MENU/ENTER] knob to select "[EXECUTE]" and press the [MENU/ENTER] knob. The display now shows the status of finalizing. When finalizing is completed, " Completed [...]

MR-8HD/CD Supplementary manual Viewing the T OC inf ormation You can view the TOC information of a burned disc both before finalizing and after finalizing (for a disc burned by " Disk at once ", you can view the TOC only after finalizing, of course). It is recommended to check the remaining time (the recordable time left) from the TOC inf[...]

MR-8HD/CD Supplementary manual Vie wing the T OC information after finalizing The following assumes that a disc automatically finalized after " Disk at once " writing or a disc finalized after " T rack at once " writing is ejected from an external CD-R/RW drive, while the display shows the CD-RW menu screen where " CD Final[...]

MR-8HD/CD Supplementary manual FOSTEX CO . 3-2-35 Musashino, Akishima-shi, T okyo, Japan 196-0021 FOSTEX AMERICA 13701 Cimarron Avenue, Gardena, CA 90249 U.S.A. © PRINTED IN CHINA AUGUST 2006 8588 086 000 (449478)[...]