Fujioh BUF-03R инструкция обслуживания

1U030981 READ AND SA VE THESE INSTR UCTIONS. K eep this manual in a con venient place f or future ref erence. FUJI INDUSTRIAL CO ., L TD . T ABLE OF CONTENTS Saf ety Instr uctions .................................................................................................. 2 Name of P ar ts .....................................................[...]

2 SAFETY INSTR UCTIONS Bef ore installation and operation, read these instr uctions carefully and use this product only in the manner described by the manuf acturer in the operation manual. The instruction shown below are used to aler t y ou to potential personal injur y and proper ty damage hazards. There are three hazard classifications based on [...]

3 CA UTION : means prohibition. It indicates actions , if any , that mustn’t be done .  : means f orcib le e xecution. It indicates actions, if any , that must be done . NO TE : The saf ety instr uctions are e xplained with the follo wing pictogr aphic symbols. 3. Read specification label on this product f or fur ther inf or mation and require[...]

4 NAME OF P AR TS SIZE & DIMENSIONS - Accessories - - Accessories - - Accessories - - Accessories - - Accessories - (Unit : inch) Screw M5 × 30 F our (4) pieces Nut with plate F our (4) pieces[...]

5 1 The range hood m ust be installed just abov e the cooktop. 2 The minimum distance from the cooking surf ace to the bottom of the range hood must be 24". 3 The total weight of the B UF-03R range hood unit is: BUF-03R -------- 18 lbs. (8 kg) 4 P ower requirements are: A C120 V , 60 Hz, 1.8 Amp RANGE HOOD LOCA TION CA UTION • Chec k that th[...]

6 1. PREP ARA TION W ARNING • If the range hood is not installed properly , it could become detached and f all off. • Ensure that the metal duct does not touch other metal housing materials, otherwise fire or electric shock could result. 1 This range hood can discharge upw ard or bac kward. According to the conditions where the hood is installe[...]

7 3 Run house wiring between ser vice panel and hood location. 4 Prepare the range hood unit.      In case of V er tical Dischar ge (1) The range hood is supplied with the e xhaust pipe fix ed on its top plate. (2) Pro vide a transition duct (not supplied) to connect the e xhaust pipe and e xter nal duct. For the siz e of transition [...]

8 INST ALLA TION (continued)      In case of Horizontal Dischar g e (1) Ref err ing to Fig. at r ight, pro vide a rectangular hole in the wall f or passing through the e xhaust pipe. (2) Remov e the e xhaust pipe from the top of the range hood. NO TE K eep 4 screws (M4 × 8) f or fixing the e xhaust pipe later . (3) Detach the cov er[...]

9 2. RANGE HOOD MOUNTING 1 Hold up the range hood unit and inser t it into the opening of the liner . When the 4 securing plates on both sides hav e passed through the top of the liner , tur n them outward to secure the r ange hood on the liner temporar ily . Make sure that the top of the e xhaust pipe is inser ted into the bottom of the transition[...]

10 INST ALLA TION (continued) 3 Disconnect the wire connector between the push s witch assemb ly and wire bo x, then detach the front cov er b y disengaging its hinge par t. NO TE Be careful not to damage the hinge par t . 4 Align 4 scre w holes of the liner and range hood unit, then fix securely using the supplied scre ws (M5 × 30) and nuts . NO [...]

11 3. CONNECTING PO WER SUPPL Y WIRES W ARNING • Electrical wir ing should be done by a qualified person(s) in accordance with all- applicab le codes and standards, including fire-r ated constr uction. An unqualified person doing the work could result in fire, electric shoc k or injur y . • This range hood uses 120V A C . Do not connect to othe[...]

12 INST ALLA TION (continued) 4 Connect the electrical wires as follo ws: Connect wires tightly and securely using wire connectors (not supplied). • Blac k to Black • White to White • Green to Green 5 Replace the wire cov er with the scre w remov ed pre viously . Make sure that all wires are connected properly and enclosed inside of the wir i[...]

13 4. FINAL ASSEMBL Y AND CHECK One 40 W light b ulb (not supplied) can be mounted to this range hood. Prior to final assembly , install a light bulb (ordinary type, in the base diameter 17 mm), rated 120 V -40 W or below . 1 Assembl y (1) Hang the front cov er on the hinge par t. (2) Connect the wire connector and replace the front cov er with 4 s[...]

14 5. EXPLANA TION T O THE END USER (1) Ref er to the Operation Manual, e xplain the operation of this range hood to end users. (2) The Installation Manual and Oper ation Manual should be giv en to the end user . INST ALLA TION (continued) CIRCUIT DIA GRAM Motor Connector Connector T er minal Capacitor Red Red Red White White Orange Brown Blue Whit[...]

Fuji Industrial USA, Inc. 16300 Christensen Rd., Ste-212 Seattle , W A 98188-3403 T elephone: 1-888-547-9880[...]