Fujitsu FI-5530C2 инструкция обслуживания

Operator's Guide fi-5530C2 Image Scanner P3PC-1922-05ENZ0[...]

fi-5530C2 Image Scanner Operator’s Guide i CONTENTS ■ Regulatory Informatio n .......................... ............................... v ■ Note of Liability ........ ........................................................... vii ■ Safety Precautions ... .................................... ........................ xi Chapter 1 BASIC SCAN[...]

ii 2.8 Scanning the Image Br ighter .............. ............................. 55 2.9 Detecting Multifeeds .................................. ....................... 57 2.10 Correcting Skew .... .................................... ....................... 62 2.11 To Output Multi-Im ages ...................... ............................. 64 2.12[...]

fi-5530C2 Image Scanner Operator’s Guide iii 5.4 Items to check before co ntacting the agent where you bought the scanner ..... .............................. ..................... 117 5.5 Checking Labels on th e Scanner ....... ........................... 120 Chapter 6 DOCUMENT SPECIFICATIONS FOR ADF ........ 121 6.1 Document Size ....... ......[...]

iv[...]

fi-5530C2 Image Scanner Operator’s Guide v INTRODUCTION Thank you for purchasing the fi -5530C2 Duplex Color Scanner. This document describe s how to han dle the fi-5530C2 and basic operatio ns. Before you start usin g the fi- 5530C2, be sure to read th is manual thoroughly to ensure correct use. This document describe s the basic operation metho[...]

vi Canadian DOC Regulations This digital apparatus does not exceed the Class B limit for radi o noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Le présent appareil numérique n'émet pas de pa rasi[...]

fi-5530C2 Image Scanner Operator’s Guide vii ■ Note of Liability READ ALL OF THIS MANUAL CAREFULL Y BEFORE USING THIS PRODUCT . IF THIS PRODUCT IS NOT USED CORRECTL Y , UNEXPECTED INJUR Y MA Y BE CAUSED TO USERS OR BYST ANDERS. Also, keep this manual in a safe place so that it can be easily refe rred to during use of this product. While all eff[...]

viii ABBYY™ FineReader™ Engine © 201 1 ABBYY . OCR by ABBYY ABBYY and FineReader are trademarks of ABBYY . Other company names and product names are the registered trademarks or trademarks of the respective companies. How T rademarks Are Indicated in This Manual Operating systems (OS) are indicated as follows: Where there is no distinction bet[...]

fi-5530C2 Image Scanner Operator’s Guide ix About Maintenance The user must not perform repairs on this scanner . Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner servic e provider to make repairs to this product. W arning Indications Used in This Manual Symbols Used In This Manual This indication alert s o[...]

x W arning Label Screen Examples In This Manual The screen examples in this manual are subject to change without notice in th e interest of product improvement. If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while re ferring to the User's Manual of the scanner ap[...]

fi-5530C2 Image Scanner Operator’s Guide xi ■ Safety Precautions In the following warnings, "power cable" may refe r to the AC cable connecte d to the AC adapter collectively . Do not damage the A C cable. Use only specified A C ca bles and connector cabl es Use this scanner only at the in dicated po wer v oltage . Do not connect to m[...]

xii Do not install the de vice in loca tions that has oil smoke, steam, humidity , and dust. T urn the scanner OFF if it is damaged. Do not put liquids inside the sc anner . Do not touch the inside of the scanner unless necessary . Do not use the scanner if there is a strange odor . Do not use aer osol spra ys near the scanner . Do not install the [...]

fi-5530C2 Image Scanner Operator’s Guide xiii Do not install the scanne r on unstable surfaces. Do not bloc k the ventilation por ts. Do not place heavy objects or stand on top of the scanner . Firmly i nser t the power plug. A v oid an y contact when scanner is in use. Do not use the scanner immediatel y after mo ving it from a cold place into a[...]

xiv Bef ore mo ving the scanner , disconnect the power plug fr om the power out let. Pr otect the scanner fr om static electricity . Disconnect the power plug fr om th e power outl et when the scanner is not used f or a long period of time . Do not install the scanner in the direct sunlight. Do not move the scanner with the power an d interface cab[...]

1 fi-5530C2 Image Scanner Operator’s Guide 1 Chapter 1 BASIC SCANNER OPERA TIONS This chapter describes the basic operations of the scanner. In this chapter, Windows XP sc reenshots are used as examples. The screens and operations may differ slightly if the operating system (OS) you are using is not Windows XP. In addition, when TWAIN is update d[...]

2 1.1 Turning the Scanner ON 1. Press the power button on the opera tor panel. The scanner is turned on, and the green LED on the operator panel illuminates. During the initialization, the indication of the Function Number Disp lay changes as follows: 8 D P D 0 D 1 A number "1" indicat ed on the operator panel sh ows that the scanner is i[...]

1.1 Turning the Scanner ON fi-5530C2 Image Scanner Operator’s Guide 3 BASIC SCANNER OPERA TIONS 1 3) In the [Printers and Other Hardware] win dow, double click the [Scanners and Cameras] icon. ⇒ The [Scanners and Cameras] window appears. 4) In Windows XP and Win dows Server 2003, rig ht-click on the [fi-5530C2dj] icon , and then select [Propert[...]

4 ⇒ The dialog box shown below appears. 2. Click the [Power Control] button ⇒ The dialog box shown below appears. 3. In this dialog box, do the following: • To power on/off the scanner by pressing the Power button : ⇒ Select [Enable power switch]. • To power on/off the scanner by conn ecting/disconnecting the AC cable: ⇒ Select [Disable[...]

1.1 Turning the Scanner ON fi-5530C2 Image Scanner Operator’s Guide 5 BASIC SCANNER OPERA TIONS 1 ■ Power Save Mode The Power Save mode keeps the sc anner in a low-po wered state if no operation is performed on the scanner for 15 minutes after it has been turned on . The scanner is automatically switched to the Power Save mode. In the Power Sav[...]

6 1.2 Placing Documents on the ADF 1. Align the edges of sh eets in the document. 1) Confirm that all sheets have the same width. 2) Check the number of the sheets in the document stack. The standard number of shee ts that can be loaded on the scanner is as follows: • A4-size paper or smaller that makes a documen t stack of 10 mm or less (100 she[...]

1.2 Placing Docum ents on the ADF fi-5530C2 Image Scanner Operator’s Guide 7 BASIC SCANNER OPERA TIONS 1 4. Place the document on the ADF paper chute. Set the document face-down in the ADF paper c hute (so that the side to be scanned faces toward the ADF paper chute). ATTENTION This scanner can scan ID card s through the ADF with the following pr[...]

8 HINT Before placing the document, pull out the ADF pap er chute extension depending on the lengths of the docu ment. HINT Place the document so that the height of the document will not surpass the line mark located at the side guide. For A4-size p aper or sma ller, place th e document so that the height of the document will not surpass the [Lette[...]

1.2 Placing Docum ents on the ADF fi-5530C2 Image Scanner Operator’s Guide 9 BASIC SCANNER OPERA TIONS 1 5. Adjust the side guides to the width of t he document. Move the side guides so that they touch both sid es of the docu ment. If there is any clearance between the si de guid es and the edges of the document, the scanned image may be skew ed.[...]

10 1.3 Scanning Documents This section explains how to sca n documents with this scanner. The following is a basic procedure for scanning documents: 1. Place a document on the scanner. 2. Launch an application you want to use for scanning . 3. Select a scanner to use. A ScandAll PRO ISIS TWAIN[...]

1.3 Scanning Documents fi-5530C2 Image Scanner Operator’s Guide 11 BASIC SCANNER OPERA TIONS 1 4. In the application, invoke a scanner d river. 5. In the driver setup dialog box , con figure settings for scanning. 6. Scan the document. 7. Save the scanned document image files. HINT • In this section, screenshots t aken in ScandAll PRO are used [...]

12 1.4 How to Use Scanner Drivers To scan documents with the scanne r, a scanner driver and applic a tion supported by the driver are prerequisites. This scanner is accompanied with two drivers; one is a TWAIN-compliant driver, TWAIN Scanner Driver, and the other is an ISIS- c ompliant driver, ISIS Scanner Driver; and an application named ScandAll [...]

1.4 How to Use Scanner Drivers fi-5530C2 Image Scanner Operator’s Guide 13 BASIC SCANNER OPERA TIONS 1 Resolution You can specify the reso lution for scanning images. Default values are selectable from the drop-d own list, and a [custom] value (can be specified in increments of 1 dpi from 50 to 60 0 dpi) can also be selected by clicking a pair of[...]

14 [About] Button Clicking this button opens an information window about the TWAIN Scanner Driver's version. [Option] Button You can set options in th e dialog box below. [Rotation] Tab Select this tab when config uring settings for the image rotation, document size and skew detection, overscan, hole punc h removal, and split image . [Job/Cach[...]

1.4 How to Use Scanner Drivers fi-5530C2 Image Scanner Operator’s Guide 15 BASIC SCANNER OPERA TIONS 1 [Advance] Button Click this button for settings of the advanced image processing. You can set Edge Extract, Gamma Patte rn, Dropout Color, Reverse, etc. [Config] Button Click this button for conf iguring the Setting Files. You can save the chang[...]

16 ■ ISIS Scanner Driver ISIS Scanner Driver is a driver software used to scan documents with a scanner from an ISIS- compliant application. Usually, you configure settings for scanning in the setup dialog box of the scanner dri ver, which is invoked from an applicati on. (Depending on the ap plication setting, the set up dialog box may not be di[...]

1.4 How to Use Scanner Drivers fi-5530C2 Image Scanner Operator’s Guide 17 BASIC SCANNER OPERA TIONS 1 Mode You can select a color mode to use from the menu. [Setup IPC] Button Click this button when configuring settings for scan ning with Image P rocessing Software Option. HINT If you select Color or Grayscale mode fo r a side (Front Image #1 or[...]

18 Resolution You can specify the number of pixels (dots) per inch. Select a preset resolution from the list or type in any value (from 50 to 600, or 1200) in the box. (If you enter a number from 601 to 1199, the resolution is automatically set to 300 dpi.) The higher the resolution, th e more memory is required. Halftone You can select a halftone [...]

1.4 How to Use Scanner Drivers fi-5530C2 Image Scanner Operator’s Guide 19 BASIC SCANNER OPERA TIONS 1 [Layout] Tab Page Orient ation You can select the page orientatio n (Portrait or Landscape). Page Size You can specify the paper size of documents to be scanned. Sele ct a size from the drop- down list. Split Image You can split a scanned image [...]

20 [Image Processing] Tab Quick Set Some image-processing-rela ted settings, which are comm only used, are readily available. Select a setting pattern, and you do not have to configur e settings one by one. The following setting patterns ar e available (Selectable only when [Black and White] is selected under [Mode]): DTC Variance You can select a [...]

1.4 How to Use Scanner Drivers fi-5530C2 Image Scanner Operator’s Guide 21 BASIC SCANNER OPERA TIONS 1 Edge Processing You can select a setting depend ing on how sharp you want to make the image. Hole Punch Removal When scanning pu nched documents that ha ve punch holes o n them, their images are output with punch holes remo ved. When scanning a [...]

22 [Paper Handling] Tab Pre-pick Pre-picking is a function that prepares the next document for scanning, feeding it to the position at which the scanning starts beforehand. You can specify whether you want to enable Pre-picking or not from this drop-down li st. Backing You can specify th e background col or, white or black. Multifeed Detecti on Mul[...]

1.4 How to Use Scanner Drivers fi-5530C2 Image Scanner Operator’s Guide 23 BASIC SCANNER OPERA TIONS 1 [Gamma] Tab Pattern Specifies how to correct Gamma. You can select a pattern from [Normal], [Soft], [Sharp], [Custom], [Download] and [Bright]. Custom Properties You can specify custom properties (Gam ma, Brightness, Contrast, Shadow, and Highli[...]

24 [Color Dropout] Tab Color Dropout Any of three primary colo rs (red-green-blue) can be dropped out from document images. For example, when scanning text in black with the red frame, selecting red color scans only text in black. This setting is available only when Blac k and White or a Grayscale setting is selected.[...]

1.4 How to Use Scanner Drivers fi-5530C2 Image Scanner Operator’s Guide 25 BASIC SCANNER OPERA TIONS 1 [Compression] Tab JPEG Quality You can specify compression levels and image quality fo r scanning in Color or Grayscale mode.[...]

26 [Imprinter] Tab You can configure settings for using the impr inter option (to be pu rchased separately). This tab is not displayed unless th e imprinter option i s installed. [ON] Checkbox Marking this checkbox enab les the imprinter function. Format Template Characters typed in this box are printe d on docu ments. You can use the following cha[...]

1.4 How to Use Scanner Drivers fi-5530C2 Image Scanner Operator’s Guide 27 BASIC SCANNER OPERA TIONS 1 Date You can specify how to indicate the date format. Counter You can specify the rule to display the counter. Top Margin You can set the distance between the top of th e page and the top of the first line printed on the page with a numeric. Uni[...]

28 [About] Tab On this tab, you can view the informati on about the ISIS driver and the scanner connected to your person al computer.[...]

1.5 Image Scanning Application fi-5530C2 Image Scanner Operator’s Guide 29 BASIC SCANNER OPERA TIONS 1 1.5 Image Scanning Application This section explains about the bundled “ScandAll PRO” image scanning ap plication, which is used as an example to explain the procedures in this manual. ScandAll PRO supports both TWAIN and ISIS drivers. By de[...]

30 1.6 Centralized Management of Scanners This section explains about managi ng a large number of scanners in a unified manner by providing the following capabilities. • Simultaneously update settings for mu ltiple scanners and their drivers. Because there is no need to update each scan ner one by one, a sign ificant reduction is achieved in the [...]

1.6 Centralized Manage ment of Scanners fi-5530C2 Image Scanner Operator’s Guide 31 BASIC SCANNER OPERA TIONS 1 To enable the abov e functions , "Scanner Central Admin" is required which consists of four applications bundled with this product: • Scanner Central Admin Server Install this application in the main computer that is used fo[...]

32[...]

2 fi-5530C2 Image Scanner Operator’s Guide 33 Chapter 2 SCANNING V ARIOUS TYPES OF DOCUMENTS This chapter describes how to scan various types of documents, us ing the combination of ScandAll PRO and TWAIN Scanner Driver as an example. In this chapter, Windows XP sc reenshots are used as examples. The screens and operations provid ed herein may be[...]

34 2.10 Correcting Skew.......................................................................... ........................ 62 2.11 To Output Multi-Images ................................................................................... ... 64 2.12 Color/Monochrome Auto Detection ..................... .......................................... ...[...]

2.1 Scanning Double -Sided Documents fi-5530C2 Image Scanner Operator’s Guide 35 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.1 Scanning Double-Sided Documents 1. Place the document on the ADF paper chute. For details on how to place documents, refer to "1.2 Placin g Documents on the ADF" on page 6 . 2. Launch ScandAll PRO. From the [Start][...]

36 2.2 Scanning Documents of Different Widths When you scan documents of different widths at one time from the ADF, some documents that are small in paper size may be skewed or may not be fe d into the scanner. It is recommended that only documents of the same widt h be scanne d at one time. In the case where you have to scan documents of different[...]

2.3 Scanning Thin Documents fi-5530C2 Image Scanner Operator’s Guide 37 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.3 Scanning Thin Documents When you scan a batch of thin documents (whi ch a re out of specifica tions with under 52 g/m ² of thickness), document jams (Mult ifeed) and mis-pi ck ing may occur. If you have to scan such docu- ments, swi[...]

38 2.4 Scanning Documents Longer Than A3 Size 1. Place the document on the ADF. For details, refer to "1.2 Placing Documents on the ADF" (page 6) . 2. Launch ScandAll PRO. From the [Start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [ScandAll PRO] in the order presented. ScandAll PRO starts up. 3. From the ScandAll PRO window, [...]

2.4 Scanning Document s Longer Than A3 Size fi-5530C2 Image Scanner Operator’s Guide 39 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 6. Click the [OK] button in the setup dia log box of TWAIN. ⇒ Changes made in thi s dialog box are saved and the setup dialog box closes. 7. Scan the document with ScandAll PRO. For information about how to scan documen[...]

40 2.5 Saving Scanned Images in PDF Format You can create PDF files from the scanne d document images by either of the following two ways: 1. From ScandAll PRO ( page 42 ) Recommended for scanning in color or grayscale mode. You can: • Reduce the size of PDF files. • Create PDF files with facility. 2. From Adobe Acrobat ( p age 46 ) Recommended[...]

2.5 Saving Scanned Images in PDF Format fi-5530C2 Image Scanner Operator’s Guide 41 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 ATTENTION Notes on the use of Adobe Acrobat • Acrobat's default settings overrides th e previous settings such as [Resolution], [Scan T y pe], and [Image Mode]. • The following functions canno t be used: - [256 Col[...]

42 ■ From ScandAll PRO 1. Place the document on the ADF paper chute. For details about how to scan documents, refer to section "1.2 Placing Documents on the ADF" on page 6 . 2. Start up ScandAll PRO. From the [Start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [ScandAll PRO] in the order presented. Then, ScandAll PRO starts u[...]

2.5 Saving Scanned Images in PDF Format fi-5530C2 Image Scanner Operator’s Guide 43 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 4. To configure PDF-related settings, click the [PDF Option ] button ( ). ⇒ The [Output PDF file] dialog bo x appears. In this dialog box, you can change the compression rate , turn on the OCR function (to make searchable P[...]

44 [OCR] Tab You can configure settings so that PDF files ar e converted into searc hable text when they are created from scanned document images. Unless OCR (optical character recognition) is turned on, scanned document ima ges are saved as PDF files in a format that computers ca nnot recognize, or in other word s they are not made searchable. Thr[...]

2.5 Saving Scanned Images in PDF Format fi-5530C2 Image Scanner Operator’s Guide 45 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 [Add a Document Open Password to created PDF files] Checkbox You can set a "Document Open" password to PDF files. Up to 16 characters (half- width) can be used for a password. This checkbox is available only for Ado[...]

46 ■ Using Adobe Acrobat 1. Place the document on the ADF paper chute. 2. Launch Adobe Acrobat From the [Start] menu, select [All Programs] - [Adobe Acroba t] in the order presented. Then, Adobe Acrobat starts up. 3. From the [File] menu, select [Create PDF], an d then select [From Scanner]. ⇒ The [Acrobat Scan] dialog box appears. 4. Select [F[...]

2.5 Saving Scanned Images in PDF Format fi-5530C2 Image Scanner Operator’s Guide 47 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 5. Click the [Scanner Options] button. ⇒ The [Scanner Options] dial og box appears. 6. If you want to change settings in the [TWAIN driver] d ialog box as described in step 9 , select [Show Scanner’s Native Inter face] fr[...]

48 9. Configure settings such as the scan resolution and document size, and then click th e [Scan] button. ⇒ The document is scan ned and another [Acrobat Scan] dialog box appears. 10. To finish scanning, slect t he [Scanning complete] radio button, and then click the [OK] button. ⇒ The scanned doucument image is saved to file and the image is [...]

2.5 Saving Scanned Images in PDF Format fi-5530C2 Image Scanner Operator’s Guide 49 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 HINT If you save scanned document imag es as described above, the file size may increase greatly. To reduce the file size, save images following the procedure below. (It ma y take time than you save as describe d above.) 1. S[...]

50 6. Click the [OK] button. 7. Click the [OK] button in the [Print] di alog box. 8. Enter a file name, and then click the [Save] button in the [Save PDF File As] dialog box.[...]

2.6 Excluding a Color from Images (Dropout Color) fi-5530C2 Image Scanner Operator’s Guide 51 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.6 Excluding a Color from Images (Dropout Color) You can select a color from primary colors (red, green, and blue) to re move (drop out) from a scanned do cument image. For example, when you scan a document contain[...]

52 3. Select a color you want to remove, from the [Dropout Color] drop-d own list under [More]. For example, when you want to obtain only black text image from a document containing black text outlined in green, select [Green] from the list. If you want no color to be dropped out, select [None]. 4. Click the [OK] button. ⇒ You are returned to the[...]

2.7 Skipping Blank Pages fi-5530C2 Image Scanner Operator’s Guide 53 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.7 Skipping Blank Pages Blank pages in a document are detected and re moved automatically. For example, when scanning both double-sided and single-sided documents together in d uplex mode, you can ob tain the scanned document images with o[...]

54 If this checkbox is marked, cache mode is automatically changed to [Ram cache]. 5. With the slider control under [Blank Pa g e Skip], specify the Blank Page Skip degree. <In Binary/Halftone mode> For white pages, use the [Black Dots Ratio] slider bar to specify a degree of accuracy needed to skip blank pages. For black p ages, use th e [Wh[...]

2.8 Scanning the Image Brighter fi-5530C2 Image Scanner Operator’s Guide 55 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.8 Scanning the Image Brighter The brightness of the scanned image can be in creased for scanning in grayscale or color. The following shows the procedure to change settin gs in the setup dialog box of TWAIN Scanner Driver. 1. From [...]

56 ⇒ The [Advance] dialog box appears. 4. Click the [Color] tab, and then select [ Bright] in [Preset Gamma]. 5. Click the [OK] button. ⇒ You are returned to the [TWAIN Driver] dialog box. 6. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAl[...]

2.9 Detecting Multifeeds fi-5530C2 Image Scanner Operator’s Guide 57 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.9 Detecting Multifeeds "Multifeed" is an error that occu rs when two or more sheets are accidentally fed into the ADF at the same time. By changing a setting, you can receive an error messa ge when the sc anner detects a multife[...]

58 4. Select how to detect multifeeds from th e [Multifeed Detection] drop-down list u nder [ADF Option]. The following are how to detect multifeeds: For more information on mult ifeed detection, refer to "6.5 Specifying How to Detect Multifeed" on page 129 . 5. Click the [OK] button. ⇒ You are returned to the [TWAIN Driver] dialog box.[...]

2.9 Detecting Multifeeds fi-5530C2 Image Scanner Operator’s Guide 59 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 ■ To Specify the Area for Multifeed Detection Normally, the multifeed detection function monito rs paper overlaps at the central part of sheets (width: 35mm). Therefore, some types of documents, such as the resume and postcard, on which a[...]

60 4) Right-click on the [fi-55 30C2dj] icon (in Wind ows XP/Windows Server 2003), or double-click on it (in Windows 20 00/Windows Vista), and then select [Properties] from the pop-up menu. ⇒ The [fi-5530C2dj Properties] dialog box appears. 5) Select the [Device Set] tab. ⇒ The following dialog box appears.[...]

2.9 Detecting Multifeeds fi-5530C2 Image Scanner Operator’s Guide 61 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2. Click the [Multifeed] button. ⇒ The following dialog box appears. 3. Configure settings in the [Specify Area for Multifeed Detection ] dialog box. 1) Mark the [Enable] check box. 2) Select whether you want to specify an ar ea to enable[...]

62 2.10 Correcting Skew The skew of documents can be detected and co rrected automatically by enabling the automatic deskew function. Change the setting in th e setup dialog box of the scanner driver. The following shows the procedure to change se ttings in the setup dialog box of TWAIN Scanner Driver. 1. From ScandAll PRO, display the setup dialog[...]

2.10 Correcting Skew fi-5530C2 Image Scanner Operator’s Guide 63 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 4. Select [Automatic Page Size Detecti on] from the [Automatic Size and Skew Detection] drop-down list. 5. Click the [OK] button. ⇒ You are returned to the [TWAIN Driver] dialog box. 6. In the [TWAIN Driver] dialog box, click the [OK] button.[...]

64 2.11 To Output Multi-Images You can obtain both color/grayscale and blac k-and-white images at a scan (Multi Image Output). * Depending on t he application to use, this function may not work properly. Configure Multi Image settings using t he scanner driver. The following shows the procedure to change settings in the setup dialog box of TWAIN Sc[...]

2.11 To Output Multi-Images fi-5530C2 Image Scanner Operator’s Guide 65 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 ⇒ The [Multi Imag e] dialog box appears. 3. Select [Multi Image Output] un der [Output mode]. 4. Select the order to output multi-images und er [Order (for Multi Image Output)]. Primary: Color/Grayscale - Secondary: Binary First, a Col[...]

66 6. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to "ScandAll PRO V2.0 User's Guide".[...]

2.12 Color/Monochrome Auto Detection fi-5530C2 Image Scanner Operator’s Guide 67 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.12 Color/Monochrome Auto Detection This scanner features automatic detection of color or black-and-w hite document scans (the term "scan," in this case, refers to a produced image by scanning). Scanning color documen[...]

68 ⇒ The [Multi Imag e] dialog box appears. 3. Select [Auto Color Detection] under [Output mode]. 4. Under [Select Current Image Setting], select a side, and then configure settings for each side in the [TWAIN Driver] dialog box. 5. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog b[...]

2.13 Splitting a Page in Two Pages fi-5530C2 Image Scanner Operator’s Guide 69 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.13 Splitting a Page in Two Pages You can obtain two images by hori zontally splitting a scanned page image. * Depending on t he application to use, this function may not work properly. Enable the Split Image func tion in the set[...]

70 4. Mark the [Split Image] checkbox. 5. Click the [OK] button. ⇒ You are returned to the [TWAIN Driver] dialog box. 6. In the [TWAIN Driver] dialog box, click the [OK] button. ⇒ Changes made are saved and the [TWAIN Driver] dialog box closes. Continue scanning in ScandAll PRO. For information about how to scan documents, refer to "ScandA[...]

2.14 Removing Punch Holes from Images fi-5530C2 Image Scanner Operator’s Guide 71 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 2.14 Removing Punch Holes from Images You can remove (obscure) punch holes (black dots) from scanned do cument images when scanning punc hed documents. Configure the Hole Pun ch Removal setting s using the scanner driver. The f[...]

72 4. Select [Automatic Page Size Detection] or [Black Background] from the [Automa tic Size and Skew detection] drop-down list. If you select a setting other than [Automatic Page Size Detection] or [Black Background], [Hole Punch Removal] is not available. 5. Select [Fill with white] or [Background color] fro m the [Hole punch removal] drop- down [...]

2.14 Removing Punch Holes from Images fi-5530C2 Image Scanner Operator’s Guide 73 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 ATTENTION Punch hole marks cann ot be removed when : • Hole marks are not aligned al ong with the e dge of the d ocument. • Hole mark siz es vary or h ole marks app ear at variou s intervals. • The document is not rect an[...]

74 2.15 Scanning by Pressing the Scan Button on the Scanner The [Scan] and [Sen d to] buttons on th e oper ator panel can be configured to perform scanning by simply pressing one of these buttons. To configure this setting, you first need to as sign an application to be launched from each button. The following shows the procedure to do so. 1. From [...]

2.15 Scanning by Pressing t he Scan Button on the Scanner fi-5530C2 Image Scanner Operator’s Guide 75 SCANNING V ARIOUS TYPES OF DOCUMENTS 2 6. Select an action and an applicatio n to be launched by the scanne r button event. In Windows XP, select an application from the [Start this prog ram] drop-down list under [Actions]. 7. Click the [OK] butt[...]

76 HINT Use the [Send to] button, fo llowing the proced ure below: 1. Press the [Functio n] button, and chan ge a number displayed on the Function Number Display. 2. When the displayed numb er and the event number you have selected in step 5 (Send to 1 - 9) matches, stop pressing the [Function] button. 3. Press the [Send to] button. Function Number[...]

3 fi-5530C2 Image Scanner Operator’s Guide 77 Chapter 3 DAIL Y CARE This chapter describes how to clean the scanner. The glass s urface insi de the ADF be comes hot du ring the operation of the scanner . Before you start cleaning the inner part s of the scanner , disconnect the AC adapter from the powe r outlet, and wait at lea st 15 minutes. Do [...]

78 3.1 Cleaning Materials and Locations requiring Cleaning ■ Cleaning Materials For details about the clea ning material s, contact the FUJITS U scanner deal er where you purchased the scanner. *1) It may take long before th e cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of [...]

3.1 Cleaning Materials and Locations requiring Cleaning fi-5530C2 Image Scanner Operator’s Guide 79 D AIL Y CARE 3 ATTENTION The scanner must be cleaned mor e frequently if you scan any of the following t ype of sheets: • Documents of coated paper • Documents cont aining printed te xt or graphics all over the pa ge • Chemically tr eated doc[...]

80 3.2 Cleaning the ADF As a guideline, clean the ADF afte r eve ry 5,000 scans. Note that th is guideline varies according to the type of documents you scan . For example, it may be nec essa ry to clean the ADF more frequently when you scan do cuments on which the toner is n ot firmly fixed on. ■ Cleaning Method 1. Open the ADF while pushing dow[...]

3.2 Cleaning the ADF fi-5530C2 Image Scanner Operator’s Guide 81 D AIL Y CARE 3 2. Clean the following locations with a li nt-free cloth moistened with Cleaner F1. ATTENTION It may take long before the cleane r vaporizes if a large quantity is used. When cleaning the scanner parts, da mpen a cloth with modest quantities of the cleaner. In additio[...]

82 • Pad ASSY Clean the Pad ASSY (rubber surface) downw ard (in the direction of the arrow). • Pick rollers Clean the Pick rollers lightly preventing scratches on the rolle rs’ surface. Take particular care in cleaning these rollers as black debr is on them adversely affects the pickup performance. Areas to be cleaned Pick rollers[...]

3.2 Cleaning the ADF fi-5530C2 Image Scanner Operator’s Guide 83 D AIL Y CARE 3 • Feed and Eject rollers 1) Open th e ADF wh en "P" or "0" is not indicated on th e Function Number display. If you open the ADF when "P" or "0" is in dicated on the Function Number display, the Feed/Eject rollers w ill not ro[...]

84 3. Push the ADF at its center to return it to its original position and lock the ADF bu tton. ATTENTION Close the ADF until you hear it click. Paper jams or feeding errors may occur if the ADF is not closed firmly. Push the center of the ADF[...]

4 fi-5530C2 Image Scanner Operator’s Guide 85 Chapter 4 REPLACING CONSUMABLES This chapter describes how to replace scanner consumables . In this chapter, Windows XP sc reenshots are used as examples. The screens and operations provid ed herein may be different fro m actual ones if the operating system you are using is not Windows XP. Please take[...]

86 4.1 Consumable and Replacement Cycle The following table shows the specifications of consumables and guidelines for the replacement cycle. The replacement cycles above are rough guidelin es for the use of A4/Letter woodfree or wood containing paper 80 g/m 2 (17 lb). This cycle varies according to the type of the scanned paper and how frequently [...]

4.1 Consumable and Replacement Cycle fi-5530C2 Image Scanner Operator’s Guide 87 REPLA CING CONSUMABLES 4 3. In the [Printers and Other Hardware] window, dou ble-click on the [Scanners and Cameras] icon. ⇒ The [Scanners and Cameras] wind ow is displayed. 4. In Windows XP or Windows Server 2003, right-click on the [fi-5530C2dj] icon, and then se[...]

88 5. Click the [Device Set] tab. ⇒ The following panel appears. You can check the following in formation in this panel: • Total number of scans • Pad counter (approximate number of scans after rese tting the pad counter) • Pick roller counter (approximate number of scans after resetting the Pick roller counter) • Remaining ink (When the [...]

4.2 Replacing the Pad ASSY fi-5530C2 Image Scanner Operator’s Guide 89 REPLA CING CONSUMABLES 4 4.2 Replacing the Pad ASSY 1. Remove all documents from the ADF pape r chute. 2. Open the ADF by pushing down the ADF button. 3. Remove the Pad ASSY. Pinch the Pad ASSY and slide it to the arrow direction, an d then remove it. Be careful, the ADF cover[...]

90 4. Attach a new Pad ASSY. Insert the claws of the Pad ASSY into the holes on the ADF . While pressing down the Pad ASSY, slide it to the direction "A" and install i t. 5. Push the ADF at its center to close it, and lock th e ADF. ATTENTION Make sure that the Pad ASSY is firm ly attached. If the P ad ASSY is not correctly attached, docu[...]

4.2 Replacing the Pad ASSY fi-5530C2 Image Scanner Operator’s Guide 91 REPLA CING CONSUMABLES 4 6. Reset the pad cou nter. 1) Check that the scanner is connected to your personal computer and turn on the scanner. 2) Open [Scanners and Cameras] from the control panel on you r computer. 3) Select [Properties] of [fi-5530C2dj]. ⇒ The [fi-5530C2dj [...]

92 4.3 Replacing the Pick Roller 1. Remove all documents from the ADF pape r chute. 2. Remove the ADF paper chute. 3. Open the ADF by pushing down the ADF button. Be careful, the ADF cover may close and pinch your fingers. ADF paper chute ADF button[...]

4.3 Replacing the Pick Roller fi-5530C2 Image Scanner Operator’s Guide 93 REPLA CING CONSUMABLES 4 4. Remove the Pick roller from the scanner. 1) Pinch the knobs on the sheet guide an d lift up the sheet guide to remove it. 2) Rotate the Pick roller bushing in the direction of the arrow. Sheet guide Pick roller bushing[...]

94 3) Remove the Pick roller shaft while lif ting it up in the direction of the arrow. 5. Remove the Pick roller from the shaft wh ile lifting up the tab on th e Pick roller. As the Pick roller bushing is firm ly fixed, do not try to turn the roller bushing with your fingernails. Use a paper clip for turning th e roller bushing if you cannot rotate[...]

4.3 Replacing the Pick Roller fi-5530C2 Image Scanner Operator’s Guide 95 REPLA CING CONSUMABLES 4 6. Attach new Pick roller. Insert new Pick roller aligning the screw on the shaft with the slot in the Pick roller. If you lift the pick roller tab with your fingernail, it may hurt your fingernail. Use a paper clip to lift the pick roller tab if yo[...]

96 7. Attach the Pick roller shaft to the scanner. Attach the Pick roller shaft to the scanner in reverse order of removing. 1) Set the Pick roller inserting an end of shaft into the shaft hole. 2) Turn the Pick roller bushing in the direction of the arrow. 3) Attach the sheet guide. Shaft hole Shaft Pick roller bushing[...]

4.3 Replacing the Pick Roller fi-5530C2 Image Scanner Operator’s Guide 97 REPLA CING CONSUMABLES 4 8. Push in the center of the ADF to close it until the ADF button is locke d. 9. Attach the ADF paper chute to the scann er. Press the center of the ADF ADF Paper Chute[...]

98 10. Reset the pick counter. 1) When turning on the power, check that the scanner is connected to your personal computer. 2) Open the [Scan ners and Cameras] from the contr ol panel of your p ersonal computer. 3) Open the [Properties] of [fi-5530C2 dj] from the [Scanners and Cameras]. ⇒ The [Properties of fi-5 530C2dj] dialog box is display ed.[...]

5 fi-5530C2 Image Scanner Operator’s Guide 99 Chapter 5 TROUBLESHOOTING This chapter describes what to do when a pape r jam occurs, how to troubleshoot, and items to check before contacting an agent at which you bought the scanner, as well as what the labels on the scanner indicate. 5.1 Removing Jamme d Documents ........ ........................[...]

100 5.1 Removing Jammed Documents If a document ja m occurred, follow the procedur e below to remove the jammed documents. 1. Remove all documents from the ADF pape r chute. 2. Open the ADF by pushing down the ADF button. • T ake care not to get injured when removing the jammed documen ts. • Be careful not to get neckties, necklaces, etc. entan[...]

5.1 Removing Jammed Documents fi-5530C2 Image Scanner Operator’s Guide 101 TR OUBLESHOO TING 5 3. Remove the jammed docu ments. 4. Push in the center of the ADF to close it until the ADF button is locke d. ATTENTION Staples, pape r clips, etc. cau se documen t jams. Be sure to fully check th e document and feed path, and remove an y small metal o[...]

102 5.2 Error Indications in th e Function Number Display When any error occurs, the opera tor panel indicates "U" followed by a number alternately for temporary errors, or "E" followed by a nu mb er for device alarms (permanent error). Temporary errors can be resolved by the operator , but the device alarm requires recovery wor[...]

5.2 Error Indications in t he Function Number Display fi-5530C2 Image Scanner Operator’s Guide 103 TR OUBLESHOO TING 5 ■ Device alarms: A number appearing in alternation following the "E" refers to th e follo wing type of device alarms: Indication Meaning Solution E2 Trouble in the optical system (front). When you encounter any alarm,[...]

104 5.3 Remedying Common Troubles This section describes troubles that may occu r during scanning and how to remedy them. Before you ask for repair service, check the following flowcharts. If you cannot solve the problem after checking the remedies in the flowchar ts, check the items in "5.4 Items to check before contacting the ag ent where yo[...]

5.3 Remedying Common Troubles fi-5530C2 Image Scanner Operator’s Guide 105 TR OUBLESHOO TING 5 If you cannot solv e the problem after taking measures, chec k the items in "5.4 Items to check bef ore contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU ser vice provider . Has a long time pas[...]

106 *) For details, refer to Getting Started "2 .2 Connecting the scanner to your PC". NO Load document correctly on ADF paper chute. Is the document loaded correctly on the ADF paper chute? YES Is the ADF closed completely? YES Is the interf ace cable connected correctly? NO Close the ADF completely . NO Connect interf ace cable correctl[...]

5.3 Remedying Common Troubles fi-5530C2 Image Scanner Operator’s Guide 107 TR OUBLESHOO TING 5 *) For details on how to cl ean dirty locations, refer to "3 DAILY CARE" on page 77. YES NO Select halftoning or dithering on your PC. Did you select halftoning or dithering? YES Are the upper/lower glasses inside the ADF clean? NO Clean dirty[...]

108 *) For details on how to cl ean dirty locations, refer to "3 DAILY CARE" on page 77. NO Clean dirty locations. (*) Symptom 5 Quality of scanned text or lines is unsatisfactory . YES Are the upper/lower glasses inside the ADF clean? If you cannot solv e the problem after taking measures, chec k the items in "5.4 Items to check bef[...]

5.3 Remedying Common Troubles fi-5530C2 Image Scanner Operator’s Guide 109 TR OUBLESHOO TING 5 *) For details on how to cl ean dirty locations, refer to "3 DAILY CARE" on page 77. Clean dir ty locations. (*) YES Do not press down the ADF or place heavy object on the ADF during scanning. NO YES Is the ADF cov er pressed do wn or heavy ob[...]

110 *) The ADF glass, refer to "3.2 Cleaning the ADF" on page 80. NO YES Scan the documents with low resolution settings. Do the lines disappear on images with low resolution settings? NO YES Do the lines appear on the same part of images? Symptom 7 V ertical lines appear in the scanned image. Clean the upper/lower glasses inside the ADF [...]

5.3 Remedying Common Troubles fi-5530C2 Image Scanner Operator’s Guide 111 TR OUBLESHOO TING 5 YES N O The scanner operation is nor mal. Does the F u nction N o . display indicate any alarm after t u r ning O N the scanner again? Symptom 8 The F u nction Nu m b er Displa y indicates an alarm after the scanner is t u r ned O N If yo u cannot sol v[...]

112 Use documents that satisfy the requirements. (*1) NO Fulfill the multi feed detection conditions. (*2) NO YES Do the documents satisfy the conditions described under the "Precautions" in "6.2 Document Paper Quality"? When the multi feed detection is ON, are the multi feed detection conditions fulfilled?(*2) Were the document[...]

5.3 Remedying Common Troubles fi-5530C2 Image Scanner Operator’s Guide 113 TR OUBLESHOO TING 5 *1) For details on the re quirements, refer to "6.2 Document Quality" on page 123. *2) For details on multifeeds, refer to "6.5 Specifying How to Detect Multifeed" on page 129. *3) For details on how to set pa per thickness switch, r[...]

114 *1) For details, refer to "6.2 Document Quality" on page 123. *2) For details, refer to "2.3 Scanning Thin Docume nts" on page 37. *3) For details, refer to "4 REPLACING CONSUMABLE S" on page 85. *4) For details, refer to "3.2 Cleaning the ADF " on page 80. Use documents that satisfy the requirements. (*1[...]

5.3 Remedying Common Troubles fi-5530C2 Image Scanner Operator’s Guide 115 TR OUBLESHOO TING 5 *) For details on how to clean the rollers, refer to "3.2 Cleaning the ADF" on page 80. Clean all the rollers. (*) YES NO YES Have you cleaned all the rollers? Have you adjusted the scan scale? NO Symptom 1 1 Right click the Scanner Control Ce[...]

116 YES NO Did you adjust the offset (starting position for scanning the document)? Right click the Scanner Control Center icon and select [Options] then adjust the [Sub-scan Setting]. Symptom 12 There is a shadow on the leading edge of the scanned images. Check the items in "5.4 Items to check before contacting the dealer where you bought the[...]

5.4 Items to check before contacting the agent where y ou bought the scanner fi-5530C2 Image Scanner Operator’s Guide 117 TR OUBLESHOO TING 5 5.4 Items to check before contacting the agent where you bought the scanner Check the following items b efore you cont act the agent w here y ou bough t the scanner. ■ General Deta ils Item Findings Model[...]

118 ■ Problems in Installati on or PC connection • Problems occur when connecting to you r computer • Problems in the feeding system • Problems in the imaging system Item Findings OS Displayed error message Interface (Example) SCSI interface Interface controllers (Example) made by Adaptec SCSI Card 2940AU Item Findings Document type Main pu[...]

5.4 Items to check before contacting the agent where y ou bought the scanner fi-5530C2 Image Scanner Operator’s Guide 119 TR OUBLESHOO TING 5 • Others Item Findings Can both the original document and the scanned document image (output paper with Fax) be sent out by e-mail or Fax?[...]

120 5.5 Checking Labels on the Scanner ■ Positions of Labels on the Scanner Label A (example): Indica tes scanner information. Label B (example): Indicates various stan dards that the scanner conforms with. Label A Label B[...]

6 fi-5530C2 Image Scanner Operator’s Guide 121 Chapter 6 DOCUMENT SPECIFICA TIONS FOR ADF This chapter describes the required document sizes and paper quality for ensuring a correct operation when scanning documents on the ADF. 6.1 Document Size .............................................................................. ...................... [...]

122 6.1 Document Size The following shows the size of documents that can be scanned. (Unit: mm) Maximum Minimum A B A B 297 (11.7 in) 863.6 (34 in) 53 (2.0 in) 74 (2.9 in) F eed i ng D i rect i on A B[...]

6.2 Document Quality fi-5530C2 Image Scanner Operator’s Guide 123 DOCUMENT SPECIFICA TIONS FOR ADF 6 6.2 Document Quality This section describes the types and thicknesse s of documents that can be scanned stably, and precautions to follow. ■ Document Type The recommended following paper types are: • Woodfree paper • Wood containing paper Wh[...]

124 ■ Precautions The following documents may not be scanned successfully. • Documents of non-uniform thickn ess (e.g. envelopes and docu ments with photographs attached) • Wrinkled or curled do cuments (Refer to HINT on page 125 .) • Folded or torn documents • Documents with pictures and/ or sticky no tes attached • Tracing paper • C[...]

6.2 Document Quality fi-5530C2 Image Scanner Operator’s Guide 125 DOCUMENT SPECIFICA TIONS FOR ADF 6 ATTENTION • Carbonless p aper cont ains chemical subst ances that may harm the Pad ASSY or rollers (e.g. Pick roller) when documents a re fed. Pay attention to the following: Cleaning: If document jams occur frequently, clean the Pad ASSY and th[...]

126 ATTENTION This scanner can scan ID card s through the Automatic Document Fee der with the following precautions. • Place one card at a time into the Auto Document Feeder . • ID card feeding requires the card to be fed th rough the Auto Docum ent Feeder in portrait mode as in the following figure. • Smooth cards should be placed face d own[...]

6.3 Maximum ADF Capacity fi-5530C2 Image Scanner Operator’s Guide 127 DOCUMENT SPECIFICA TIONS FOR ADF 6 6.3 Maximum ADF Capacity The maximum number of sheets that can be loaded on the ADF pape r chute is determined by the size and weight of the documents. The followi ng graph shows the maximum do cument loading capacity of ADF with respect to pa[...]

128 6.4 Area Not To Be Perforated When using the ADF, document trou ble might occur if there is any punched hole in the shaded area in the following figure. (Un i t : mm) T op of paper F ront s i de F eed i ng d i rect i on Center of paper B ottom of pape r 35[...]

6.5 Specifying How to Detect Multifeed fi-5530C2 Image Scanner Operator’s Guide 129 DOCUMENT SPECIFICA TIONS FOR ADF 6 6.5 Specifying How to Detect Multifeed One of the following is sel ected to detect a multifeed: • Check overl apping • Check length • Check overla pping and length The following describes what condition is requ ired for eac[...]

130 HINT • When the overlapping check is specified, the p apers which cont act closely each other , such as glued paper or electro- statically charged paper , can result in the mi ss-detection of multifeed. • Normally multifeed detection will monitor the follo wing area of the document. (Un i t : mm) T op of paper F ront s i de F eed i ng d i r[...]

7 fi-5530C2 Image Scanner Operator’s Guide 131 Chapter 7 SCANNER SPECIFICA TIONS This chapter lists the scanner specifications. 7.1 Basic Specification s ................................................................................ ........... 132 7.2 Installation Specifications............................................................ .....[...]

132 7.1 Basic Specifications No. Item Specification 1 Scanner Type ADF ( A utomatic D ocument F eeder) - 2 Image sensor CCD x 2 F ront / B ack 3 Light source Incandescent cold cathode fluorescent lamp x 2 Front / Back 4 Scanning area Minimum A8 portrait 127 g/m 2 paper Maximum A3 / 11 x 17 in 5 Paper Weight 52 to 127 g/m 2 (13.9 to 34.0 lb) (*1) 6 [...]

7.1 Basic Specifications fi-5530C2 Image Scanner Operator’s Guide 133 SCANNER SPECIFICA TIONS 7 *1) For details, refer to "6 DOCUMENT SPECIFICATIONS FOR ADF" on page 121 . *2) The scanning speed shows the maximum performance of the scanner (hardware). Software processing time such as data transfer time is added to the actual scanning ti[...]

134 7.2 Installation Specifications Item Specification Dimensions (Without ADF paper chute and Stacker) Depth Width He ight 225 mm (8.9 in) 399 mm (15.7 in) 193 mm (7.6 in) Installation Space (D x W x H) 800 x 500 x 500 mm (31.5 x 19.7 x 19.7 in) Weight 8.5 kg (18.7 lb) Input power Voltage 100 to 120 VAC ±10% 220 to 240 VAC ±10% Phases Single-pha[...]

7.3 External Dimensions fi-5530C2 Image Scanner Operator’s Guide 135 SCANNER SPECIFICA TIONS 7 7.3 External Dimensions The following shows th e external dimensions of the fi-5530C2. (Unit : mm) 399 (15.7") 225 (8.8") 457 (17.9") 193 (7.5") 293 (1 1.5")[...]

136[...]

fi-5530C2 Image Scanner Operator’s Guide AP-1 A APPENDIX A Using the [Scan] or [Send to] Button By linking software applications to the [S can] or [Send t o] button, you can laun ch the linked application at a press of a button. (To use ScandAll PRO, read section 2.14 "Scanning by Pressing the Scan Button on the Scanner" on page 74 .) ?[...]

AP-2 The events available for this function are: - Scan Button (Press the [Scan] button) - Send to 1-9 (W ith a numb er from 1 to 9 displayed on the Function Number Display , press the [Send to] button ) 6. Select an application to be launched when an event occurs. If the operating system you are using is Windows XP, select [St art this program] un[...]

fi-5530C2 Image Scanner Operator’s Guide AP-3 A ■ Settings to Config ure on the Scanner • When you want to use the [Scan] butto n There is no specific settings. ⇒ Upon pressing the [Scan] button, the linked application starts up. • When you want to use the [Send to] button Press the [Function] button re peatedly to change a number display[...]

AP-4 APPENDIX B GLOSSARY OF TERMS A4 size A standard p aper size. Paper size is 210 x 297 mm. A5 size A standard p aper size. Paper size is 148 x 210 mm. A6 size A standard p aper size. Paper size is 105 x 148 mm. A7 size A standard p aper size. Paper size is 74 x 105 mm. A8 size A standard p aper size. Paper size is 53 x 74 mm. ADF (A utomatic Doc[...]

fi-5530C2 Image Scanner Operator’s Guide AP-5 B A utomatic siz e/skew detection A function that automatically detect s the document' page size and adjusts output d ata to the detected page size. Document skewing is automatically det ected and corrected for the output image. Brake r oller A roller that prevents two or more sheet s of p aper f[...]

AP-6 Default settings Pre-set values for optional menus. Density In this manual, refers to a me asurement of the depth of the display . Dither The process by which a group of dots is ar ranged to represent a sha de of gray . The predetermined dot p attern simulates shades of gray . This scanning process offe rs the advantage of reduce memory requ i[...]

fi-5530C2 Image Scanner Operator’s Guide AP-7 B Equipment Err or An error that cannot be fixed by the op erator . The operator should call the manufa cturer for service. Err or diffusion High-quality half tone (pseudo-g rayscale) image production based on black-and -white pixel binarization. A pixel's o ptical density and that of adjace nt p[...]

AP-8 Flatbed An input device of the scanner , where documents are pla ced and scanned. Generally used for scanning pages out of a book, or p aper th at is out of the feeding specification of the ADF . Also used to scan a small volume of document s by manual operation. Gamma A unit of changes of images' brightness. It is ex pressed a s a functi[...]

fi-5530C2 Image Scanner Operator’s Guide AP-9 B IPC preset mode While reading binary images, it is necessary to set th e scanner according to the quality of the sheet to be read. In this mode, t hese settings can be performed in advance by corresponding each setting to a patte rn number . ISIS (Image Scanner In terface Specification) A standard o[...]

AP-10 Mirr or image The read image is symmetrica lly flipped to produce a mirror image o f the original detected in the main scanning d irection. Moire P atterns Recurrent pattern s on scanned images caused by incorrect settings of angle s. Noise remo v al Isolated noise from an image appearing as black spots in white area s and voids in black area[...]

fi-5530C2 Image Scanner Operator’s Guide AP-11 B Photograph mode (White level f o llower OFF) Selecting photograph mode makes brightness and cont rast settings effective but prevents the threshold from bein g set. Wi th photograph mode, the darkness of image corresponds to the black-pixel density , making it suitable in scanning images such as ph[...]

AP-12 Separation r oller A roller that separa tes the sheet s of p aper from each other . Simplex reading mode A mode for scanning only the front side o f the document. Smoothing A process that eliminates "jaggies" from sl anted lines and curves. Irregular convexities are deleted and irregular conca vities filled in . This is useful in OC[...]

fi-5530C2 Image Scanner Operator’s Guide AP-13 B TW AIN (T echnology Without An y Interesting Name) A standard for API (App lication Program Inte rface) or protocol for imaging devices (scanners, digital cameras, etc.) developed by TW AIN Working Group . In order to use devices that comply with this standa rd, it is necessary to install driver so[...]

AP-14[...]

fi-5530C2 Image Scanner Operator’s Guide IN-1 INDEX A [Add a Document Open Password to created PDF files] Checkbox .............. .................... 45 B [Basic] Tab ................................................. 43 C Checking Labels on the Scanner ............. 120 Cleaning Materials ..................................... 78 Cleaner F1 .....[...]

IN-2 M [Make only the first page searchable] Checkbox ................................................... 44 Maximum ADF Capacity .......................... 127 Multi feed Detection Conditions ............... 129 Multi Image ...... .......................................... 64 O OCR ....................................... .................... 44 OC[...]

z The contents of this manual are subject to change without notice. z PFU LIMITED is not liable whatso ever for any damages resulting from the use of this scanner a nd procedures described in this manual, profit loss due to defects, and any claims by a third party. z Copying of the contents of this manual in whole or in part and copying of the scan[...]