Fujitsu HE4VS01E инструкция обслуживания

Before using the display , read the User’ s manual (1/2) and the User’ s manual (2/2) carefully so that you know how to use the display correctly . Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep these manuals where the user can access them readily . * Install[...]

E-2 ACCESSORIES CHECKING ACCESSORIES • Display One remote control T wo AA batteries T wo user’ s manuals One power cable T wo big ferrite cores (E T ype) CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT Carefully check the terminals for position and type before making any connections. Loose connectors can result in picture or color problems. Make [...]

E-3 English PAR T NAMES AND FUNCTIONS Front 1 Power indicator lamp This lamp shows the state of the po wer supply . Lit (red): Power OFF (stand-by) Lit (green): Pow er ON Lit (orange): Power sa ving (DPMS: Power saving function) mode ON Flashing (red or green): Malfunction (Flashes dif ferently depending on the type of malfunction.) 2 Remote contro[...]

E-4 1 OFF/STD-BY switch OFF : The power indicator lamp goes of f, and the power can’t be turned on b y the power b utton. The power is partly supplied. STD-BY :The power indicator lamp lights red, and the po wer can be turned on or off by the po wer button. 2 RS-232C terminal (RS-232C) This terminal is provided for you to control the display from[...]

E-5 English * T erminal layout may differ and functions may not be av ailable with some models and some device options. 5 External speaker output terminal (EXT SP) Connect this terminal to the optionally av ailable speaker . (When using other speaker than the optional one, use 4–16 Ω speak er.) When connecting a cable, attach a ferrite core to [...]

E-6 Description of Input T erminals PAR T NAMES AND FUNCTIONS (Continued) Pin No. Signal 1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 TD (T ransmit Data) 4 DTR (Data T erminal ready) 5 GND (Ground) 6 DSR (Data Set Ready) 7 R TS (Request T o send) 8 CTS (Clear T o Send) 9 RI (Ring Indication) RS-232C terminal (RS-232C) Pin No. Input signal Pin[...]

E-7 English INST ALLA TION T o pre vent the display ’ s internal components from overheating, mak e sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this displa y . Also, be sure that your dealer performs the instal[...]

E-8 OPTIONS W all-mounting Br ack et 0° to 15° mounting angle P-WB4201 Ceiling unit 0° to 15° mounting angle P-CT4200 Desktop Stand unit P-TT4200 Speaker system P-42SP11 (1 set of 2 speakers) Desktop Speak er Stand P-42ST11 (1 set of 2 speakers stands) V ideoboard • P42VCA30 • HE4VS01 *W hen installing an option, make sure tha t all install[...]

E-9 English INST ALLING THE VIDEO BOARD 1. T urn the power supply switch to OFF . 2. Remove the power plug from outlet. 3. Remove the metal fittings on the installation position at the rear of this device (M3 screw x 2). 4. Slide the video board into the installation opening along the left and right guide pins and insert the connectors. 5. Use the [...]

E-10 FACTOR Y SETTINGS This display can store the latest four types of signals for RGB adjustment v alue. The fifth input signal will delete the adjustment v alue of the first input signal. T o do this, select a desired signal and follo w the instructions in “ Adjusting Screen Position and Size” on the User’ s Manual (2/2) to adjust the param[...]

E-11 English SPECIFICA TION Model P42VCA30W/P42VCA30E HE4VS01W/HE4VS01E Screen size 42" wide screen: 92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 31 kg / 68 lbs 31.5 kg / 69.4 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm 40.7 (W) x 25.2 (H) x 3.3 (D)[...]