Fujitsu XG700 инструкция обслуживания

XG700 Hardware Guide P3N1- E041-0 1EN[...]

Preface 1 Y ou have purchased the XG700, a co mpact, 12 port 10 Gigabit Ethernet layer 2 switch that achieves unsurpassed standards of high throughput and low-latency performance. This manual explains the procedure s required to install your XG700 and shoul d be read and understood before you start using your XG700. First edition (September 2 005) [...]

2 For Safe Use of the XG700 W arnings are included th roughout this manual in orde r to prevent injury to the user and/or material damage. These are two levels of warnings, both of which are composed of a symbol and a message de scribing the issue. For Safe Use of the XG700 This manual con tains import ant information to ensure the sa fe use of you[...]

For Safe Use of the XG700 3 This symbol indicates the po ssibility of serious or fatal injury if the XG70 0 is not used properly. For your safety and that of others , please follow these guidelines. Category Warning Danger of electric shock or fire Never attempt to disassemble , dismantle, upgrade, or re cycle t he XG700 by yourself. Do not place o[...]

4 For Safe Use of the XG700 This symbol indicates the possibil ity of minor or moderate personal i njury, as well as damage to th e XG700 and/or to othe r users and their property, i f the XG700 is not used properly. Category Caution Danger of device damage Do not place the XG700 on its side or sta ck up multiple XG700s. Doing so may damage the XG7[...]

For Safe Use of the XG700 5 Never attempt to dismantle or mo dify the XG700 yourself. This i s extremely dangerous since the XG700 includes b oth high voltage and high temperature components. If maintenance is required, contact the vendor's service department. The following warn ing label may be found on the rear o f XG700. Do not attemp t to [...]

6 For Safe Use of the XG700 FCC Class A CE Marking CAN/CSA C22.2 No. 60950, UL60950 an d EN60950 Under certain conditions, twisted pair cables c an b ecome charged with static electrici ty . Con- necting a statically charged twisted pair cable to a device can cause the device or it s LAN port to operate fa lsely or to become da maged. Use a static [...]

About This Manual 7 This manual is written for an administrator who has responsib ility for network system configu- ration, maintenance, and management. Understanding the following knowledge is expected. • Basic knowledge of networ ks , intranets and the internet. • Basic knowledge of system management. • Basic knowledge of system security. T[...]

8 About This Manu al This manual uses the following symbols. Company names and products names referred in this manual are registered trademarks or trademarks of respective companies. The trademark ™ and ® have been omitted from this manu al. The latest product information includ ing technical information, update informa tion, are avail- able fro[...]

3 Content s 9 1 2 A Contents Preface ............... ................ ................ ............. ................ ................ ............. 1 For Safe Use of the XG700 ................ ................ ................ ................ .......... 2 Warning notations .............. ................. ................. ................. .....[...]

10 Contents Appendix ............ ............................ .......................................... ........... 35 Appendix-A Specifications .... ................. ................ ................... ................ ........... 36 A.1 Product Specifications ..... ................................................................... ........ 3[...]

Installation This chapter lists the items that should be in the XG700 package, descr ibes the names and functions of the various compo nents of the XG700. 1-1 Parts List ................................................................................................. 12 1-2 XG700 Components ..........................................................[...]

12 Instal lation • XG700 The XG700 itself. • Power Cord A 3-pin cable to connect the XG700 to a power supply. • Seria l Cross Cable A cable to connect the XG700 to a PC whe n the settings need to be adju sted. 1-1 Part s List Before proceeding, check that all of the following parts were included in your XG700 package. Contact the vendor'[...]

Part s List 13 1 • Rack Mounting Brackets Brackets for mountin g the XG700 in a ra ck. Attach each rack mounting bracket to the right and left sides of the XG700, and fasten to the rack posts with the rack screws (large). • Rack Mounting Bracket BR A bracket for mounting the XG700 in a rack. Attach the rack mounting bracket BR to the back-right[...]

14 Instal lation The following explains the names and functions of the compon ents at the front of th e XG700. • Power LED (Green) Lights when the XG700 is receiving power. • Alarm LED (Orange) Lights when there is a problem with the XG7 00. • Status LED (Green) Lights when the XG700 is in an operable state. • Serial Port Used when performi[...]

XG700 Components 15 1 The following explains the names and functions of the components at the rear of the XG700. • Power Switch Used to turn the XG700 on/off. • Power Supply Unit Supplies power to the XG700 (includes an exhaust fan). - Power Supply LED (Green/Orange) Green LED lights when the XG700 is on. Orange LED lights when there is a probl[...]

16 Instal lation There are three main in dicator LEDs o n the front of the XG700: Pow er LED, Alarm LED, and Status LED. The following explains th e LED display under various conditions. *1: If the XG700 is operating normally. If a problem occurs, the front panel LEDs an d the LEDs on the individual parts can be used to identify the trouble: *2: On[...]

Labels 17 1 Obey the following warning: 1-3 Labels A warning sticker , product nameplate, product ID label, and MAC la bel are to be found in various places on the XG700. Product  Nameplate Right  view  of  XG700 To p  view  of  XG700 Product  ID  Label MAC  Label W arning  Sticker Warning sticker[...]

18 Instal lation This indicates the model, part number, serial numb er, etc. This indicates the model and serial nu mber. This indicates the MAC address: MAC addresses are allotted relative to the address on the MAC la bel: Product nameplate MODEL. PART  NO.  PA SER  NO.  P  1  50/60Hz [...]

Installation and Operation This chapter explains how the user should proceed from installation to opera tion of the XG700. 2-1 Installation Overview ........................................................... ................... 20 2-2 Installation Procedure ............................................................................. 21 2-2-1 Inst[...]

20 In stallation and Operation Install the XG700 and the proceed wi th normal opera tion as follow s: 2-1 Inst allation Overview This section reviews the flow of work as the user proceeds fro m installation to operation of the XG700. Check that the everything is secure 4 Turn the power on 5 "For Safe Use of the XG700", "2-2 Installat[...]

Inst allation Procedure 21 2 Before insta lling the XG700, read " For Safe Use of the XG700 (P.2)" and compl y with the installation requi rements described below. When installing the XG700, a certain amo unt of installation space is necessary. When installing the rack, the indicated space (8 0 0mm of both the front and rear of the ra ck)[...]

22 In stallation and Operation Only use the XG700 under th e temperature, humid ity and other environmental conditions specified in "A.2 Installation Specifi cations (P.36)". Usin g the XG 700 outside the follow ing ranges can shorten the lifetime or cause the failure of the XG700. Temperature (5 - 40°C) Humidity (20 - 80%RH) When instal[...]

Inst allation Procedure 23 2 The following explains how to install the XG7 00 in a 19-inch rack. 1. Take the XG700 out of its box. 2. Fix the cage nuts and rails to the rack posts. 2-2-2 Installing the XG700 in a rack Rack Post Refer to Detail A Rail R Spring lugs at the top and bottom Detail A Cage Nuts [When the rack has square post holes] Rack S[...]

24 In stallation and Operation [When the rack has round post holes] Rack Post Rack Post Refer to Detail A Rail L Rail R Rack Nut Clip the rack nuts onto the rack post so that the holes are lined up. Rack Nut Detail A Rack Screws (Large) Rack Screws (Large) Rack Post Rack Nut Rack Nut Front Rack Post Front Detail B Rack Nut Detail C Refer to Detail [...]

Inst allation Procedure 25 2 3. Fix the four rack mounting brackets to the XG700. Each of the four rack moun ting bracket s (left, right, back-left, back-righ t) has th ree holes that should line up with matching holes on the sides of the XG7 00, as shown in the diagram. Attach each rack mounting bracket using the countersunk bracket screws provide[...]

26 In stallation and Operation 5. This completes the rack installation procedure. The following explains how to unin stall the XG700 from a rack. 1. Undo the rack screws that were used to fasten the XG700 to the rack. 2. Slide the XG700 forward, and remove it from the rack. Rack Post 1 2 3 4 5 6 7 8 9 10 11 12 Console RS-232 Power Alarm Status Mng-[...]

Cable Connection 27 2 The cables need to be connected to the XG700 Xenpak modu les. 1. Connect the cables to the XG700. Connect the cables to the Xenpak modules (Port 1 - Port 12) on the front of XG700. Attention Attention It is necessa ry that the c onnectors be fixed in the correct posi tion, in order to protect the connector interface agai nst e[...]

28 In stallation and Operation After connecting the peripheral units, connect the XG700 powe r cords. W ARNING • Do not touch the power plug with wet hands, as there is a risk of electric shock. • Do not damage or re model the power cords, as this may cause elec tric shock or fire. Placing a heavy object on, pulling, excess ively bending, twist[...]

Cable Connecti on 29 2 2. Connect the power cord to the power outlet. Insert the plug at the other end of the power cord into the power strip or wall socket. W ARNING • Unplug the XG700 durin g thunder-storms. Continued use under these c onditions risks lightning damage to the XG700, and may cause a fire. • When you remove a power plug fr om it[...]

30 In stallation and Operation CAUTION Do not move, shock, or vibrate the XG700 while it is on. 1. Turn the power switch to the "on" position by pressing the [ ] side. The Power LED (Green) on the front of the XG700 should turn on. The Alarm LED (Orange) should turn on for a moment, then should turn off. The Status LED (Green) should turn[...]

Troubleshooting This chapter describes wha t you should do when your XG700 has pr oblems. 3-1 S tart-up Problems ................................................................................... 32 3-2 Hardware Problems ................................................................................ 33 3[...]

32 T roublesho oting [Symptom] The power switch is turned on, but the XG700 does not power up. [Cause] Possible ca uses: 1 Loose cable, or 2 Hardware failure [Action] 1 Check that all cabl es are connected pro per ly, then (if the XG700 still doesn't turn on) or 2 Contact the vendor' s service department. [Symptom] The XG700 has not start[...]

Hardware Problems 33 3 When a problem is detected with a fan, th e fr ont panel Alarm LED lights up in orange, the LED of the fan unit in which the error has occurred lights up in orange, and an error is recorded in the eve nt log. If a fan error occu rs, contact the vendor's service department. When XG700 overheats, the Alarm LED lights up in[...]

34 Tr oubleshootin g[...]

Appendix This appendix explains XG700 specifica tions. Appendix-A S pecifications ............................................................................ 36 A.1 Product S pecifications .................................................................. 36 A.2 Installation S pecifications..........................................................[...]

36 Appen dix The product specifications of the XG700 are as follows: The installation specifications of the XG700 are as follows: Appendix-A S pecifications This section details the specifications of XG700 . A.1 Product Specifications Items Overview 10 Gigabit por ts Port1 - Port12 IEEE802.3ak compli ant 10 Gigabit Ethernet port X 12 Serial Port RS[...]

XG700 Hardware Guide P3N1-E041-01 EN Date of issue: September 2005 Issuing authority: PFU LIMITED Printed in Japan • Contents of this manual are not to be reproduced without permission from PFU. • The contents of this manual may be updated without notice . • PFU assumes no liability for damages to third party copyrights or other rights arisin[...]