Furman Sound PM-PRO II инструкция обслуживания

SERIES II 20 AMP POWER CONDITIONERS[...]

SERIES II 20 AMP POWER CONDITIONERS PL-PRO Series II Additional Features • T wo retractable, long-life, low-heat LED light xtures with dimmer control for rack illumination • Front panel meter to display incoming line voltage ranging from 90 to 128 volts PL-PRO D Series II Additional Features • T wo retractable, long-life, low-heat LED ligh[...]

SERIES II 20 AMP POWER CONDITIONERS I N T R O D U C T I O N Thank you for purchasing a Furman Series II Power Conditioner , and Congratulations on your choice. The Series II power conditioners feature Furman’s revolutionary Series Multi- Stage Protection Plus (SMP+) circuit, as well as our exclusive Linear Filtering T echnology (LiFT). T ogether [...]

SERIES II 20 AMP POWER CONDITIONERS carefully before using. WA R N I N G T o reduce the risk of electrical shock, do not expose this equipment to rain or moisture. Dangerous high voltages are present inside the enclosure. Do not remove the covers. Refer servicing to qualied personnel only . The lightning ash with an arrowhead symbol, is inten[...]

SERIES II 20 AMP POWER CONDITIONERS 9. Do not attempt to service your Series II unit beyond what is described in this manual. All other servicing should be referred to qualied service personnel. A D D I T I O N A L F E A T U R E S PL-PRO SERIES II The PL-PRO II features LED rack lights which produce virtually no heat and provide an extremely lon[...]

SERIES II 20 AMP POWER CONDITIONERS O P E R A T I O N Retractable Rack Lights, Rear Panel Lamp and Dimmer Control: The PL-PRO II and PL-PRO D II utilize a dimmer control for the two retractable front panel light tubes. The dimmer knob controls the brightness of both light xtures. T urn it clockwise to increase brightness; turn it counterclockwis[...]

SERIES II 20 AMP POWER CONDITIONERS (1) If only the single leftmost (beneath the 90V mark – 180V for E version ) LED ashes, the input voltage is marginally low . (2) If all of the LED’s on the voltmeter ash, the input voltage is marginally high. Power to the PL-PRO’s outlets will remain unless the incoming voltage rises above the Extrem[...]

SERIES II 20 AMP POWER CONDITIONERS units, the Extreme V oltage indicator LED will light if the input voltage is above the extreme voltage cutoff, and power will not be applied to the unit’s outlets. If the unit has been operating with an acceptable input voltage and subsequently that voltage exceeds 135V , it will shut off power to the outlet an[...]

SERIES II 20 AMP POWER CONDITIONERS DEFINITIONS SPIKE: This is a pulse of energy on the power line. Spikes can have voltages as high as 6000 volts. Though they are usually of very short duration, the energy they contain can be considerable, enough to damage sensitive solid-state components in audio and computer equipment. Spikes can also foul switc[...]

SERIES II 20 AMP POWER CONDITIONERS 9 registration. Shipping charges to the Furman factory or to an authorized repair location must be prepaid by the Purchaser of the product. Manufacturer shall, at its own expense, furnish a replacement Product or , at Manufacturer ’s option, repair the defective Product. Return shipping charges back to Purchase[...]

SERIES II 20 AMP POWER CONDITIONERS SPECIFICA TIONS Current rating: 20 amps (“E” versions 16 amps) Operating V oltage: 90 to 140 V AC (“E” versions 180 to 280 V AC) Over V oltage Shutdown: 140 V AC typically (“E” versions 260 V AC typically , “J” ver- sions 125 V AC typically) V oltmeter Accuracy: PL-PRO II only: ±2 V AC, calibrate[...]

SERIES II 20 AMP POWER CONDITIONERS Furman Sound, LLC. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www .furmansound.com E-mail: info@furmansound.com 1 1 1804-C[...]