Garmin Vista C инструкция обслуживания

color map navigator owner’ s manual eT r ex ® V ista C eTrex Vista C OM Front Cover.indd 1 8/12/2004, 9:52:09 AM[...]

© Copyright 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. T el. 913/397.8200 or 800/800.1020 Fax 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9DL, U.K. T el. 44/0870.8501241 Fax 44/0870.8501251 Garmin Corporation No. 68,[...]

i eT rex Vista C Preface Contact Garmin If you should encounter any diffi culty while using your eT r ex Vista C, or if you have any questions, in the U.S.A. contact Garmin Product Support by phone at 913-397-8200 or 800-800-1020, Monday – Friday , 8 am – 5 pm Central Time; or at www .garmin.com/contactUs/techSupport.jsp In Eur ope, contact Ga[...]

ii eT rex Vista C Software License Agr eement Software License Agr eement BY USING THE eT rex Vista C, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFT - W ARE LICENSE AGREEMENT . PLEASE READ THIS AGREEMENT CAREFULL Y . Garmin grants you a limited license to use the software embedded in this device (the “Software”) in bin[...]

iii eT rex Vista C Introduction The eT rex Vista C complies with Part 15 of the FCC interfer ence limits for Class B digital devices FOR HOME OR OFFICE USE. These limits are designed to pr ovide more reasonable pr otection against harm- ful interference in a residential installation, and ar e more stringent than “outdoor” requirements. Operatio[...]

iv eT rex Vista C CAUTION: Use the eT rex Vista C at your own risk. T o reduce the risk of unsafe operation, carefully review and understand all aspects of this Owner’ s Manual — and thoroughly practice operation using the Demo Mode prior to actual use. When in actual use, carefully compare indications from the eT rex Vista C to all available n[...]

v eT rex Vista C MAP DA T A INFORMA TION: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. W e use a combination of gover n- mental and private data sources, which we identify as r equired in pr oduct literature and copyright messages displayed to the co[...]

vi eT rex Vista C Safety W arnings and Cautions—Read This Fir st! W ARNING: For use in vehicles, it is the sole responsibility of the owner/operator of a vehicle with the eT rex Vista C installed to place and secure the device so that it will not interfere with the vehicle operating controls and safety devices, obstruct the driver’ s view of dr[...]

vii eT rex Vista C Introduction T able of Contents Section 1: Introduction...............................................i-vii Preface.........................................................................................i Software License Agreement........................................................ii FCC Compliance Information..............[...]

viii eT rex Vista C Introduction Section 4: GPS Featur es ........ .......... .......................68-76 Calendar ...................................................................................68 Alarm Clock .............................................................................69 Calculator .............................................[...]

1 eT rex Vista C Installing the Batteries The eT rex Vista C operates on two “AA” batteries (not included), which are located in the back of the unit. Alkaline or NiMH batteries may be used (see page 56 for setting the battery type). Stored data is not lost when batteries are removed. T o install batteries: 1. Remove the battery cover from the [...]

2 eT rex Vista C Vista C N GPS Antenna • Provides quick satellite acquisition K ey Functions IN/OUT Zoom K eys • From the Map Page, pr ess to zoom the map in or out. • From any other page, pr ess to scroll. up or down a list or move a high- lighted slider . MENU/FIND K ey • Press and release to view the Options Menu for a page. • Press an[...]

3 eT rex Vista C Getting Started Auxiliary Mount Adapter (Do not discard - retain for use with Garmin Auto, Bik e and Marine Mount Accessories) Belt Clip/Auxiliary Mount Adapter Attachment Location • Accepts a Belt Clip accessory for convenient access when hiking or walking. • Accepts the Auxiliary Mount Adapter accessory supplied with the unit[...]

4 eT rex Vista C Getting Started Satellite P age displaying a location “Fix” Initialization & the Satellite P age T he eT rex Vista C locates satellites above its position Options Menu Starting Up the GPS Receiver When you turn on the eT rex Vista C, the GPS receiver begins to search for satellites in or der to determine (fi x) its locatio[...]

5 eT rex Vista C Getting Started Initialization & The Satellite P age Map P age with Current P osition Arrow 4. When the receiver has signals from at least three satellites , the display at the top of the page changes to indicate position accuracy and location coordinates . T he Status Bar at the top of the display indicates the GPS status and [...]

6 eT rex Vista C Getting Started The Main P age Sequence When you turn on the eT rex Vista C, a “Power On” Page is followed by the Satellite Page (which displays only at start up) and then the Map Page. The Map Page is the fi rst of the four Main Pages in sequence. T o view each Main P age: 1. Press and release the QUIT k ey repeatedly to cycl[...]

7 eT rex Vista C Status Bar Battery Power Auxiliary Power Acquiring Satel- 2-Dimension Navigation 3-Dimension Navigation Alarm is Set USB is Connected Getting Started The Main P age Featur es Status Bar , Backlighting and On-Screen Messages When you press and release the POWER key , The Backlight Bright- ness Adjustment Slider and a Status Bar with[...]

8 eT rex Vista C GPS Navigation The Map P age Using the Map Page The Map Page is the primary navigation feature of the eT rex Vista C. The Map Page displays a detailed map of the area surr ounding your current location. It allows you to pan the map with the ROCKER key and view your progr ess when navigating. When in the “T rack Up” mode (orient[...]

9 eT rex Vista C GPS Navigation The Map P age Zoom In Using Map Page F eatures Use the Zoom IN and OUT keys to change the map scale. Y ou can show more map area with less detail or less map ar ea with more detail. Press and hold to Zoom the map scale rapidly . The map scale in the lower left hand side of the display is shown in units of measurement[...]

10 eT rex Vista C GPS Navigation The Map P age The Map Page Options Menu The Map Page can be changed to display a variety of information for navigation. Y ou can stop navigation to a destination, arrange up to four data fields to display the type of navigation information you desire, include a navigation guidance text message on the map page and se[...]

11 eT rex Vista C GPS Navigation The Map P age T wo Data Fields Data Field Sub-Menu F our Data Fields List of Data Field Options T hree Data Fields T o display Data Fields: 1. With the Map P age Options Menu displayed, use the ROCKER k ey to highlight the Data Fields option and press ENTER . 2. Observe the sub-menu options: “Map Only ,” “2 Da[...]

12 eT rex Vista C GPS Navigation The Map P age T o display Guidance T ext: 1. With Map P age displayed, press the FIND k ey to display the Map P age Options Menu. 2. Highlight the Guidance T ext Option and press ENTER to display the Guidance T ext Options Menu. 3. Select the desired option; “ Always Show ,” “Never Show” or “Show When Navi[...]

13 eT rex Vista C GPS Navigation Measuring Distance This Map Page option allows you to determine the distance to a point on the map from your curr ent location. Access the Map Page Options Menu, select “Measure Distance” and press ENTER to activate. T o measure between two selected points on the Map, move the Map Pointer to the fi rst map poin[...]

14 eT rex Vista C GPS Navigation The Compass P age Compass P age Course P ointer Bearing P ointer T he Compass Ring moves to indicate North orientation. T he Course P ointer indicates your course of travel and the distance you drift off course . T he Bearing P ointer always indicated the direction to your destination. Using the Compass Page The Com[...]

15 eT rex Vista C GPS Navigation The Compass P age The Electronic Compass When you manually turn the Compass Off, it stays of f until you man- ually turn it On again. Sometimes, however , when you tur n the Compass On, the eT rex Vista C overrides the Compass and uses the GPS r eceiver to track your heading. The criteria for switching between the C[...]

16 eT rex Vista C GPS Navigation The Compass P age Calibrating the Electronic Compass The Electronic Compass must be calibrated outdoors when you fi rst use the eT rex Vista C and after new batteries have been installed. The accuracy of the Electronic Compass is adversely af fected if the unit is not held level or if you are near objects that gene[...]

17 eT rex Vista C GPS Navigation The Compass P age Compass P age Options Menu T o use Compass P age Options: Press the MENU k ey to display the Options Menu. T o use Sight ‘N Go to navigate: 1. Use the QUIT button to access the Compass P age and then use the MENU k ey to access the Options Menu. 2. Use the ROCKER k ey to highlight the Sight ‘N [...]

18 eT rex Vista C GPS Navigation The Compass P age T o stop navigation: Highlight “Stop Navigation” and press ENTER to stop navigating. T o select the Cour se P ointer or the Bearing P ointer: T he “Bearing Pointer” is the factory set default option. When the “Bearing P ointer” option is displayed, the “Course P ointer” is active an[...]

19 eT rex Vista C GPS Navigation The Compass P age Course P ointer Option Show 3 Data Fields Data Field Display Options T o display data fi elds: 1. Press MENU , then highlight the data fi elds option and press ENTER to display the “Show: 3 Data Fields or 4 Data Fields” options . 2. Highlight your selection and press ENTER . T o change data ?[...]

20 eT rex Vista C GPS Navigation The Altimeter P age The Altimeter Page displays the current elevation, rate of ascent/ descent, a profi le of elevation changes over distance or time, or a pr ofi le of pressure changes over time. The Altimeter Page Options Menu allows you to select from a variety of display options such as plotting over time, plo[...]

21 eT rex Vista C GPS Navigation The Altimeter P age Y ou can customize the “V iew” option displays using the “Zoom Ranges” option to determine time, distance, pressure, and elevation parameters. If you know the correct elevation for your location, you can increase the accuracy of the altimeter using the ‘ Calibrate Altimeter’ option. U[...]

22 eT rex Vista C GPS Navigation The Altimeter P age Zoom Ranges Y ou can set the Zoom Ranges for elevation, distance, or time when you display “View Elevation Plot.” Ranges for vertical distance ar e displayed as you press the Up and Down ROCKER keys. Ranges for linear distance are displayed as you press the Left and Right ROCKER keys. Ranges [...]

23 eT rex Vista C GPS Navigation The Altimeter P age View P oints Y ou can scr oll through a r ecorded elevation or pr essure pr ofi le to view data for any point along the profi le. When the red vertical and horizontal crosshairs ar e stopped at a location along the profi le, the display shows the elevation or pressure, time of day and date the[...]

24 eT rex Vista C GPS Navigation The Altimeter P age Reset Y ou can reset the elevation data and the maximum elevation data by selecting these “Reset” options from the Altimeter Page Options Menu. T o r eset the elevation data and max elevation fi elds: 1. Use the ROCKER k ey to highlight the “Reset” option from the page Options Menu and p[...]

25 eT rex Vista C GPS Navigation The Altimeter P age Calibrate Altimeter Because the eT rex Vista C r elies on barometric pr essure to determine elevation, and the pressure at any given elevation can fl uctuate, you can calibrate the altimeter to increase its accuracy . Y ou must know the eleva- tion or pressure at your curr ent location. Use a re[...]

26 eT rex Vista C GPS Navigation The Mark W aypoint Page The Mark W aypoint Page allows you to mark and recor d your current (or any other) location as a waypoint and displays name for that waypoint and a waypoint symbol. Y ou can mark your current location at any time. T o mark your curr ent location as a waypoint: 1. Press in and hold the ENTER k[...]

27 eT rex Vista C GPS Navigation T o cr eate a waypoint with the map panning arrow: 1. With the Map P age displayed, move the panning arrow (map pointer) to the map item you want use as a w aypoint. If there is information in the mapping database for that location it highlights momentarily and display a name or address . 2. Press ENTER to display t[...]

28 eT rex Vista C GPS Navigation Editing a W aypoint A waypoint can be selected from the Find Featur e W aypoints list and edited to change the map symbol, name, location coordinates, elevation or to delete it. Refer to page 31 for details on using the Find Feature. T o edit a W aypoint: 1. Use the Find F eature to display the desired waypoint info[...]

29 eT rex Vista C GPS Navigation T o move a W aypoint on the Map P age: 1. Use the Find F eature to display the Information P age for the desired waypoint (refer to page 36). 2. Highlight the “Map” button at the bottom of the page and press ENTER to display the waypoint on the map . 3. Press ENTER again to place a “Move” mark er next to the[...]

30 eT rex Vista C GPS Navigation Find Menu Using Find Using the Find Menu The Find Feature pr ovides you with a method for searching for Cities and Exits, which are included in the eT rex V ista C basemaps. If you have downloaded Garmin MapSource mapping data that contains additional map detail, you can search for Points of Inter est, Addresses and[...]

31 eT rex Vista C GPS Navigation Searching for a location using Find By Name If you know the name of the location you want to find, the Find By Name search option may be the easiest method of sear ching. To fi nd a location using Find By Name: 1. Press the MENU/FIND k ey to display the Find Menu. 2. Use the ROCKER key to highlight the Group icon f[...]

32 eT rex Vista C Using Find GPS Navigation Using the Find Item Information Page When you select a Find item and press the ENTER key , an Informa- tion Page displays with detailed information about the item. This page contains the following information: • A title (if a waypoint, it can be renamed and a map symbol assigned). • An information fie[...]

33 eT rex Vista C GPS Navigation The Find Information Page Options Menu offers eight options for using a Find Item as a tool for navigation. T o use the Find Item Information P age Options Menu: 1. With an Information page displayed for a Find item, press the MENU k ey to display the Options Menu. 2. Use the ROCKER key to highlight the desired opti[...]

34 eT rex Vista C • Change Reference - Point to a new location on the map Page using the Panning Arrow and pr ess ENTER . • Set Pr oximity - Pr ogram an alarm to sound when you ar e within a speci fied radius of an item defined by the Information Page. (Refer to the Section on Proximity W aypoints on page 67 for detailed information.) • Add T[...]

35 eT rex Vista C GPS Navigation Searching for a W aypoint The W aypoints List is your storage file for all created and saved waypoints. W aypoints are stor ed in alpha/numerical order and ar e also identified by a symbol assigned from a list of symbol types. W aypoints can be selected as destinations and added as points on a route. To fi nd a W a[...]

36 eT rex Vista C Using Find GPS Navigation Searching for a Geocache The Find Geocache feature allows you to view the list of geocache locations that you have created using the eT rex V ista C or downloaded from your computer . A geocache location is actually a waypoint with a special geocache symbol assigned to separate it from others on the waypo[...]

37 eT rex Vista C GPS Navigation Searching for a City The Find Cities feature allows you to sear ch for any city listed in the mapping database (either in the basemap or from downloaded detailed mapping data). To fi nd a city: 1. Press and hold the MENU/FIND k ey to display the Find Menu. 2. Use the ROCKER k ey to select the ‘Cities’ option, t[...]

38 eT rex Vista C GPS Navigation Using Find Searching for an Inter state Exit The Find Exits feature allows you to sear ch for the nearest Interstate Exits. T o sear ch for Exits: 1. Press and hold the MENU/FIND k ey to display the Find Menu. Select the Exits icon, then press ENTER to display the Exit List. 2. Highlight and select an exit type by p[...]

39 eT rex Vista C GPS Navigation Searching for an Address The Find Addresses feature allows you to sear ch for an address if you have downloaded detailed mapping data. Enter the street number , street name and city and the Find Feature matches that data with addresses in the map database. To fi nd an Address: 1. Press and hold the MENU/FIND k ey t[...]

40 eT rex Vista C GPS Navigation Using Find Options Menu Intersection Matches Intersection Info P age Intersections Search P age Searching for an Inter section The Find Intersections feature allows you to sear ch for an intersec- tion if you have downloaded detailed mapping data. Enter the two street names and city and the Find Feature matches that[...]

41 eT rex Vista C GPS Navigation Searching for a P oint of Interest Y ou can use the Find Point of Interest feature to locate a nearby restaurant, lodging, landmark, public building, park, etc. However , you must have downloaded MapSource detailed mapping that supports this feature, otherwise these options, plus Address and Intersection options, ar[...]

42 eT rex Vista C The Main Menu is the directory for all unit features not in the Main Page sequence. Use the ROCKER key to highlight a feature name and then press ENTER to display the featur e page. • Satellite - This feature allows you to observe the status of overhead GPS satellites. • T rip Computer - This feature pr ovides a variety of use[...]

43 eT rex Vista C GPS Navigation The T rip Computer P age Big Numbers Option Select “Change Data Fields” or press the ROCKER k ey to highlight a fi eld you want to change . Options Menu Using the T rip Computer Page The T rip Computer Page provides you with a wide variety of travel data that is useful when navigating long distances. It indicat[...]

44 eT rex Vista C GPS Navigation Using a T rack Log The T racks feature creates an electr onic trail on the map page as you travel about and is referred to as a T rack Log. A track log contains informa- tion about points along its path, including time, position and elevation. Use a T rack Log do the following: • Record your movements for a given [...]

45 eT rex Vista C GPS Navigation Using T racks 5. Highlight the “Record Method” fi eld and press ENTER to display the Distance , T ime and Auto options . Because a tr ack is made of a series of points that defi ne your path of travel, they can be placed a specifi ed “Distance” apart or placed at a “T ime” interval you specify . T he [...]

46 eT rex Vista C GPS Navigation Using T racks Saved T rack Page 4. T he Saved T r ack P age allows you to rename the tr ack, view the track distance , view the calculated area encompassed by the track (an area is defi ned even if the track is open ended), and specify a color for the track when displayed on the map page (Show On Map). On-screen bu[...]

47 eT rex Vista C GPS Navigation Using T racks T rack Profiles A T rack Elevation Profile can be created fr om any saved track. A T rack Profile page displays when you select “Pr ofile.” Digital Elevation Models (DEM) maps can also be used to create track pr ofiles. See page 86 for more information about MapSour ce U.S. T opo 24K maps. T o view[...]

48 eT rex Vista C T o use the T racBack feature: 1. With the Saved T racks P age for the track or the T rack Log displayed, highlight the T r acBack button and press ENTER to display the T racBack P age . 2. A map showing the entire track appears and you are prompted to select the point you want to T r acBack to . Use the ROCKER k ey to move the P [...]

49 eT rex Vista C GPS Navigation Using Routes Creating and Using a Route W ith routes, you can cr eate a sequence of intermediate waypoints that lead you to your fi nal destination. The eT rex Vista C stores 50 r outes, with up to 250 waypoints each. A route can be cr eated and modifi ed from the Routes Page, and waypoints can be added to a route[...]

50 eT rex Vista C Using Routes GPS Navigation Methods of navigating to a destination: • When you activate the “Go T o” button on the Information Page for a User W aypoint or other Find Menu items, the eT rex V ista C creates a straight path (point to point) from your curr ent location to that location. • When you press the “Navigate” bu[...]

51 eT rex Vista C GPS Navigation Using Routes List of T urns for an Active Route using the “F ollow Roads” option Preview of T urn 4 of 9 T urns on a Route Navigating a Route After you have created a r oute, you can begin navigation immediately . When you are navigating a r oute, a guidance message and graphic view of turns in the route display[...]

52 eT rex Vista C GPS Navigation Using Routes Route Leg T ransition Options Saved Routes Options Route on the map will transition to the next leg point when you are within a 1 mile radius of that point. Route Options T o delete the r oute: 1. Access the Saved Routes P age from the Main Menu and press the MENU k ey to display the Options Menu. 2. T [...]

53 eT rex Vista C GPS Navigation Using Routes Route Detail P age Options Menu Route W aypoint Options Menu Route Vertical Profi le using U .S . T opo 24K DEM mapping data Using the Route Detail Page Options: T o r emove all waypoints: 1. Press the MENU k ey to display the Options Menu. 2. Highlight the “Remove All” option and press ENTER . At [...]

54 eT rex Vista C The Highway P age GPS Navigation The Highway Page When you are navigating a r oute, the Highway Page can guide you to the destination using data fields and a graphic highway . Up to four user - selectable data fields display information such as speed, distance, time to next point on the route, etc. The list of data to display and [...]

55 eT rex Vista C GPS Navigation The Setup Menu Setup Menu The Setup Menu The Setup Menu allows you to customize the eT rex Vista C to your personal preferences. Each setup page is identified by an icon. Highlight an icon and press ENTER to view that setup page. These setup pages are arranged with features and data fields that can be changed to mee[...]

56 eT rex Vista C GPS Navigation Display Setup The Display Setup Page allows you to select a screen display color scheme for day and night viewing. Y ou can set the backlight timeout and the level of brightness, which can significantly save battery power . T o change a Display Setup featur e: 1. Use the ROCKER and ENTER k eys to select the feature [...]

57 eT rex Vista C GPS Navigation T ones Setup The T ones Setup Page allows you to customize the signal tones for a variety of unit features. T o use the T ones Setup featur e: 1. Access the T ones Setup Page . 2. Use the ROCKER k ey to highlight the feature for which you want to set a tone and press ENTER to display the options menu. 3. Highlight t[...]

58 eT rex Vista C GPS Navigation Map Setup T he “General Settings” Map Setup Page Many of the Setup fea- tures use the same type of option lists: Off/On, Most to Least, Small to Large , a scale from 20 feet to 500 miles and a k eypad for numerical data entry . The Map Setup Options Menu allows you to quickly restore map settings . T o customize[...]

59 eT rex Vista C Map Setup - General Settings The fi rst page of the Map Setup feature is the General Settings Page. Use this page to select the map orientation. “Below” sets the map scale at which the T rack Up feature displays; all scales above that revert to the North Up map orientation. “Auto Zoom” changes the map scale to include the[...]

60 eT rex Vista C GPS Navigation Map Setup T he “T ext Settings” Map Setup P age T he “Map Information” Map Setup P age T he “Marine Settings” Map Setup P age Map Setup - T ext Settings The fourth page of the Map Setup feature is the T ext Settings Page. Use this page to select the text size for descriptions of items on the Map Page. Y [...]

61 eT rex Vista C GPS Navigation Routing Setup Routing Setup P age F ollow Road Options Routing Setup Options Calculation Method Options Routing Setup The Routing Setup Page allows you to customize how routing func- tions behave. There are setup and option menus for r oute creation and methods of navigation. T o Use Routing Setup Options: 1. Access[...]

62 eT rex Vista C Geocache Setup The Geocache Setup Page allows you to find and recor d items hidden at geographic locations. Refer to the Garmin website www .garmin.com , for details and directions for downloading geocache locations fr om the internet. T o use the Geocache Setup featur e: 1. Access the Geocache Setup P age . 2. Highlight the symbo[...]

63 eT rex Vista C Time Setup The T ime Setup Page allows you to set the correct time for your geographic location. T o use the Time Setup feature: 1. Access the T ime Setup Page . 2. Highlight the T ime Format fi eld and press ENTER to choose from 12 or 24 (Military T ime) hour formats . 3. Highlight the T ime Zone fi eld and press ENTER to choos[...]

64 eT rex Vista C GPS Navigation Heading Setup The Heading Setup Page allows you to specify the type of heading display and the type of North Reference used to calculate your heading. Unless you have a working knowledge of Headings and North Referenc- ing, it is recommended that you use the default values. T o use the Heading Setup featur e: 1. Acc[...]

65 eT rex Vista C GPS Navigation Altimeter Setup Altimeter Setup The Altimeter Setup Page allows you to setup the Altimeter to self- calibrate each time you turn on the unit, to function as a barometer or to manually calibrate when you have accurate elevation or pressure data. T o set up the Altimeter: 1. Access the Altimeter Setup P age . 2. Highl[...]

66 eT rex Vista C Welcome P age Setup The W elcome Page Setup Page allows you to insert a message on the W elcome Page (the first page to display when you tur n the unit on). 1. Access the W elcome P age Setup P age. 2. Use the k eypad at the base of the screen to enter your welcome message . Use the ROCKER key to move between char acters and press[...]

67 eT rex Vista C GPS Navigation Pro ximity W aypoints The Proximity W aypoints Page allows you to establish waypoints that have alarm circles ar ound them at specified distances. The alarm helps you to avoid locations that are restricted or hazar dous. T o use the Pr oximity W aypoint feature: 1. Access the Pro ximity W aypoints P age from the Mai[...]

68 eT rex Vista C GPS Featur es Calendar The Calendar allows you to view the following for any given day and location: Sunrise/Sunset times, moon phase, Hunt and Fish probabilities, archived waypoints for activities you want to navigate to and a day , week or month format display . T o use the Calendar featur e: 1. Access the Calendar from the Main[...]

69 eT rex Vista C GPS Featur es Alarm Clock The Alarm Clock Feature allows you to use your eT rex V ista C as an alarm clock. Y ou can choose fr om differ ent alarm tones, and use the “Snooze” feature to delay the alarm for an additional seven minutes. T o set the Alarm Clock: 1. Access the Alarm Clock from the Main Menu. 2. Highlight the Alarm[...]

70 eT rex Vista C GPS Featur es Stopwatch This feature allows you to use the eT rex V ista C as a stopwatch, which includes a lap timer . Y ou can choose to have the unit recor d the lap time based on distance. T o start the stopwatch: Use the ROCKER key to highlight the “Start” fi eld and then press ENTER . T o stop the stopwatch: Use the ROC[...]

71 eT rex Vista C GPS Featur es Sun and Moon The Sun and Moon T ables pr ovide you with a graphic depiction of the sun and moon relative to the Earth. Sun and moon positions can be displayed for any time, date and location on Earth. The Sun and Moon Page also displays sunrise, sunset, moonrise and moonset times for the selected time, date and locat[...]

72 eT rex Vista C GPS Featur es Hunt and Fish The Hunt and Fish T ables pr ovide you with a listing of predicted best times for hunting and fishing for a chosen date and location. T o display hunting and fi shing pr edictions: 1. Access the Hunt and Fish P age from the Main Menu. T he cur - rent date and location are displayed in the date and loca[...]

73 eT rex Vista C GPS Featur es Games The eT rex Vista C pr ovides games as an entertainment feature. Several of these games employ GPS. T o select and play a game: 1. Access the Main Menu and use the ROCKER key to select the Games icon. 2. Use the ROCKER k ey to highlight the desired game and press ENTER to display a brief description prompt for t[...]

74 eT rex Vista C GPS Featur es Virtua Maze This GPS game creates a virtual maze on the screen. Y ou are placed at a central position in the maze and must explore the maze collecting flags. The lower right corner of the screen tells you how many flags remain. The lower left corner displays the elapsed time. The Difficulty Level determines how much [...]

75 eT rex Vista C GPS Featur es Nibbons In this GPS game, you must walk around the boar d collecting the flags as they appear . As you walk, your “tail” grows. Y ou may travel anywhere on the screen but you cannot walk on your tail, or you lose a life. As an added challenge, you must also avoid the Skulls that chase after you. Gekoids This GPS [...]

76 eT rex Vista C GPS Featur es Beast Hunt Although not a true GPS game, Beast Hunt requires some naviga- tion skills. Y ou must find and defeat the dragon with an arr ow before it breathes fire at you or you fall into one of the pits while navigating a maze of platforms. At times you are transported to the next platform by slides that curve or mov[...]

77 eT rex Vista C Appendix Accessories (Included with the Unit) W rist Strap - Provides convenient method for carrying the unit. USB Interface Cable - Provides connection to a PC for data transfer and auxiliary power . Includes MapSource T rip and W aypoint Manager CD-ROM with USB Drivers . Owner’ s Manual - Start up instructions and detailed ope[...]

78 eT rex Vista C Appendix Installing the Belt Clip , Auxillary Mount Adapter and Carry Lanyard Back of eT rex Vista C Belt Clip (attaches to belt or waistband) Wrist Strap Installation USB P ower/Data Connector (under weather cover) (Press tab to release the Clip Knob) Belt Clip Knob (attaches to back of unit) Suction Mount Kit Auto Dash Mount Kit[...]

79 eT rex Vista C Appendix PHYSICAL Case: Rugged, fully gask eted, water resistant, IEC- 60529 IPX7 (Submersible 1 meter @ 30 minutes) Size: 4.2”H x 2.2”W x 1.2”D W eight: 5.6 ounces (159 g) with batteries installed Display: 1.3”W x 1.7”H, 256-color , high resolution, transrefl ective TFT (176 x 220 pixels) Backlit Antenna: Built-in patc[...]

80 eT rex Vista C Appendix GPS Accuracy P osition: < 15 meters (49 feet), 95% typical 2 Velocity: 0.05 meter/sec steady state DGPS Accuracy P osition: 3-5 meters (10-16 feet), 95% typical V elocity: 0.05 meter/sec steady state Dynamics: P erforms to specifi cations to 6 g’ s Interfaces: Garmin Proprietary (USB) Data Storage Life: Indefi nite[...]

81 eT rex Vista C Appendix Data Field Options The following list provides a brief description of each data field option. Some of these options are supported only by devices interfaced to your eT rex Vista C. Accuracy GPS - The current accuracy of you GPS determined location. Ambient Pressure - The uncalibrated curr ent pressure. Ascent-A verage - T[...]

82 eT rex Vista C Appendix Data Field Options Distance - Next - The distance to the next point on a route. Distance - Destination - The entire distance, fr om beginning to end, of a route. ET A - Next - The estimated time of arrival at the next point on your route, if you maintain your curr ent speed and course. ET A - Destination - The estimated t[...]

83 eT rex Vista C Appendix Data Field Options Odometer - The total distance you have traveled for all trips. Off Course - The distance off your dir ect course line, right or left. Pointer - The arrow that indicates the dir ection to travel to the next point on a route. Speed - Y our current vehicle speed can be measur ed in miles per hour , kilomet[...]

84 eT rex Vista C Appendix Data Field Options Time of Day - The current time and date. It can be displayed in 12 or 24 hour format in local time or universal (UTC) time. T o Course - Y our direction of travel to get back on course. T rip Odometer - The running total of distance traveled since the T rip Computer was reset. T rip Time - Moving - The [...]

85 eT rex Vista C Appendix Connecting the eT rex V ista C to a Computer Universal Serial Bus (USB) P ort Lift Cover Interfacing the eT rex Vista C The eT rex Vista C is pr ovided with interface connection to a PC using the USB connector cable provided with the unit. Connection to your computer is necessary for downloading of detailed map from Garmi[...]

86 eT rex Vista C Appendix Downloading MapSource Map Data Garmin MapSource CD-ROM’ s offer a variety of detailed mapping data and navigation information. MapSource is also an excellent medium for storage and safety backup of P ersonal W aypoints , Routes and Saved T racks . See your Garmin Dealer or visit the Garmin web site at www .garmin.com fo[...]

87 eT rex Vista C Appendix This chart is provided to help you determine the time of fset settings for your current location if it is not in one of the time zones listed on the T ime Setup Page. T o change the UTC Offset, access the Main Menu, then Setup and then open the T ime Setup Page. Highlight the T ime Zone field and press the ENTER to displa[...]

88 eT rex Vista C What ar e Map Datums , and which should I use? A datum is a mathematical model of the Earth which approximates the shape of the Earth and enables calculations to be carried out in a consistent and accurate manner . The datum is physically represented by a framework of ground monuments (i.e. trig. stations) whose positions have bee[...]

89 eT rex Vista C Appendix Appendix E Loran TD Setup T o set up Lor an TD from the Setup Menu: 1. Press the MENU k ey twice to display the Main Menu, then press again to display the Setup Menu. 2. Use the ROCKER k ey to highlight the Location icon and press ENTER to display the Location Setup P age . 3. Highlight the “P osition F ormat” fi eld[...]

90 eT rex Vista C Appendix What is W AAS? The W ide Area Augmentation System (W AAS) is an F .A.A. funded project to impr ove the overall integrity of the GPS signal. It is a space- based system that broadcasts integrity information and corr ection data as determined by ground r eference stations (see DGPS below). At this time the system is still i[...]

91 eT rex Vista C Appendix Index A Accessories 77 Accuracy Circle 9 Activate a Route 50 Alarm Clock 69 Arrow , Panning 9 AutoZoom 59 B Backlight T imeout 7, 56 Backlighting On/Off 7, 56 Battery Level Indicator 7 Battery Saver Mode 56 Battery T ype 56 Bearing Pointer 18 Big Numbers 43 Barometer Recor ding Mode 65 C Calculator Page 69 Calendar Page 6[...]

92 eT rex Vista C Appendix Index P Page Sequence Setup 57 Panning (Map) 27 Position Format 64, 88 Projecting a W aypoint 29 Proximity W aypoints 65 R Reset T rip Page 43 Routes 49-53 Creating 49 Copying 53 Deleting 53 Editing 53 Navigating 53 Reversing 51 Routing Setup 61 S Satellite Page 4 Saving the T racklog 45 Selecting a Page 2 Setup Menu 42, [...]

Garmin International, Inc. 1200 E. 151st Street Olathe, KS 66062, U.S.A. Phone: 800/800.1020 F AX: 913/397.0836 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate Romsey , SO51 9DL, U.K. T el. 44/0870.8501241 Fax 44/0870.8501251 www .garmin.com This Garmin product is warranted to be free fr om defects in materials or workmans[...]

© Copyright 2004 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey , SO51 9DL, U.K. Garmin Corporation No. 68, Jangshu 2 nd Road, Shijr , T aipei County , T aiwan www .garmin.com Part Number 190-00366-00 [...]