Gefen GTB-HDMI-3DTV-BLK инструкция обслуживания

Gefen Extender for HDMI ® 3DTV GTB-HDMI-3DTV GTB-HDMI-3DTV-BLK User Manual[...]

ASKING FOR ASSIST ANCE Rev A7 29.81 T echnical Support : T elephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 T echnical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday , Paci fi c Time Write T o: Gefen, LLC. c/o Customer Service 20600 Nordhoff St Chatsworth, CA 9131 1 www .gefentoolbox.com support@gefentoolbox.com Notice Gefen, LLC re[...]

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Layout 5 Sender Unit Descriptions 6 Receiver Unit Layout 7 Receiver Unit Descriptions 8 Connecting and Operating The Extender For HDMI 3DTV 9 DIP Switch Configuration 1 1 Network Cable Wiring Diagram 12 Wall Mounting Instructions 13 Specifications 14 W arranty[...]

1 INTRODUCTION Congratulations on your purchase of the Extender for HDMI ® 3DTV . Y our complete satisfaction is very important to us. GefenT oolbox GefenT oolbox is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater , while also focusing on going abov[...]

2 READ THESE NOTES BEFORE INST ALLING OR OPERA TING THE EXTENDER FOR HDMI 3DTV • CA T -5 or CA T -6 cables should not exceed 330 feet (100 meters). • Shielded (STP) CA T -5 or CA T -6 is recommended. However , unshielded (UTP) CA T -5 or CA T -6 is acceptable. • NOTE: Shielded cable has an advantage by providing immunity to Electromagnetic In[...]

3 FEA TURES HDMI 1.3 Features • 225 MHz (up to 12-bit YUV 4:4:4 @ 1080p60) • Deep Color • Dolby T rueHD and DTS-HD Master Audio • Lip-Sync • CEC Pass-Through Features • Extends HDMI at 1080p up to 330 ft (100 m) • 3DTV Pass-Through • Supports high bit-rate multi-channel audio formats (Dolby T rueHD / DTS Master Audio) embedded in th[...]

4 SENDER UNIT LA YOUT Left Right 3 4 1 2 To p 3 4 5 5 1 2[...]

1 CA T -5 Output Jack Connects the Sender to the Receiver unit using CA T -5 cabling. 2 IR Blaster Port Connect an IR Blaster cable from this port to the Hi-Def source to control the source from the viewing location (IR Blaster not included). 3 5V DC Locking Power Connector Connect the included 5V DC locking power supply to this connector . Only us[...]

6 RECEIVER UNIT LA YOUT Left Right 3 4 1 2 To p 4 5 6 5 1 2 3 6[...]

7 RECEIVER UNIT DESCRIPTIONS 1 IR Extender Port Connect an IR extender to this port. 2 CA T -5 Input Port Connects the Receiver to the Sender unit using CA T -5 cabling. 3 IR Sensor Receives signals from the 3D source IR remote control. The IR signals are sent back to the source device, when using an IR Blaster on the Sender . 4 Locking HDMI Port C[...]

8 CONNECTING AND OPERA TING THE EXTENDER FOR HDMI 3DTV How to Connect the Extender for HDMI 3DTV 1. Position the Extender for HDMI 3DTV sender unit near the Hi-Def source and the receiver unit next to the display . Connect the Hi-Def source to the sender with the provided locking HDMI cable. Connect the HDTV display to the receiver unit with an HDM[...]

9 DIP SWITCH CONFIGURA TION NOTE: DIP switch 4 is not used. Default settings for DIP switches DIP Switch Position 1O N 2 OFF 3 OFF 4 NOT USED DIP Switch Location On the bottom of the Extender for HDMI 3DTV Receiver unit there are four (4) DIP switches. The DIP switches allow advanced EDID management of the Extender for HDMI 3DTV which may be necess[...]

10 DIP SWITCH CONFIGURA TION DIP 1 - EDID Mode ON (default) - External EDID Mode • DDC and HPD are passed through. Both the connection status and the full A/V capabilities of the display . The HPD status will also be detected by the source device. OFF - Internal EDID Mode • Local EDID is used instead of the EDID from the display device. EDID fe[...]

11 12345678 Gefen recommends the TIA/EIA-568-B wiring option. Please adhere to the table below when fi eld terminating cable for use with Gefen products. CA T -5, CA T -5e, and CA T -6 cabling comes in stranded and solid core types. Gefen recommends using solid core cabling. CA T -6 cable is also recommended. It is recommended to use one continuou[...]

12 W ALL MOUNTING INSTRUCTIONS The GefenT oolbox Extender for HDMI 3DTV should be mounted vertically on a wall or inside / outside a cabinet with wood / drywall screws as shown in the diagram above. There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for connecti[...]

13 SPECIFICA TIONS Video Ampli fi er Bandwidth.........................................................................225 MHz Input Video Signal.....................................................................................1.2 V p-p Input DDC Signal................................................................................5 V p-p (TTL)[...]

14 W ARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is noti fi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanica[...]

[...]

Rev A7 29.81 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefentoolbox.com support@gefentoolbox.com Pb This product uses UL listed power supplies.[...]