Grizzly H7664 инструкция обслуживания

COPYRIGHT © JULY, 2005 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #BL7293 PRINTED IN CHINA 2 - I N - 1 C O M B I N A T I O N N A I L E R / S T A P L E R MODEL H7664 INSTRUCTION MANUAL[...]

[...]

T able of Cont ents SECTION 1: SAFETY .......................................................................................................4 Safety Instructions For Pneumatic Tools ....................................................................4 Additional Safety Instructions for Nailers and Staplers .........................................[...]

H7664 2-in-1 Combination Nailer/Stapler -4 - Safety Instructions For P neumatic T ools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES . Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation. 3. KEEP WORK AREA CLEAN . Cluttered areas and benches invite[...]

H7664 2-in-1 Combination Nailer/Stapler -5 - 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neck - ties, rings, bracelets, or other jew- elry which may get caught in moving parts. Non-slip footwe[...]

H7664 2-in-1 Combination Nailer/Stapler -6 - 1. HAND INJURIES: Do not place your hands near the nail/staple point of entry. A nail/staple can defl ect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the nailer/stapler to pres- surized oxygen or other combustible gases as a power so[...]

H7664 2-in-1 Combination Nailer/Stapler -7 - Operating this nailer/stapler can propel objects into the air, caus- ing immediate eye damage. To pro- tect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when operating this equipment. In addition, this nailer/stapler discharg- es at 82 decibels. To[...]

H7664 2-in-1 Combination Nailer/Stapler -8 - SE CTION 2 : INTRO DUCTION If you have any c omme nts reg ard ing th is man ual, pl ease w rite to u s at the follow ing add ress : Grizzly Industrial, Inc. C/O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 Mo st im por t antl y , we s tan d be hind our too ls. If you have any s[...]

H7664 2-in-1 Combination Nailer/Stapler -9 - SE CTION 3 : SET UP Figure 1. Model H7664 inventory. Unpacki ng Y our Mo del H766 4 lef t o ur ware hous e in a c areful ly pa cked box. I f you d isc over th e nai ler/ sta pler i s da mage d af ter you have sig ned fo r del iver y , plea se im med iately cal l Cus tomer S ervi ce at ( 57 0 ) 546- 9 663[...]

H7664 2-in-1 Combination Nailer/Stapler -10 - Compressed Air Sy stem The Mo del H766 4 i s de sig ned to b e o per- ated at 6 0 - 1 00 PSI us ing clea n, dr y, regu - late d, c ompr esse d ai r . DO N OT exc eed th e 120 P SI m axi mum op er atin g p re s- sur e fo r you r mo de l. Befo re us ing you r new na iler /st aple r , reg - ulate the air p[...]

H7664 2-in-1 Combination Nailer/Stapler -11 - Safety Y oke A safet y yoke me chan ism o n t he nos e of the na iler /sta pler ac ts as a sa fety dev ice. Whe n th e tr igg er i s pr esse d, the nailer / sta pler wil l not f ire unt il t he safet y yo ke mec han ism is depr esse d. Befo re yo u u se your na iler /sta pler fo r t he fir st tim e, c h[...]

H7664 2-in-1 Combination Nailer/Stapler -12 - SE CTION 4 : OP ERA TIONS Loadin g Figure 3. Catch lever engaged and magazine pusher retracted. When replacing brads or staples in your Model H7664, follow these guidelines: Gaug e: 1 8 Bra d Le ngth : 5 ⁄ 8 "-2" St aple Len gth : 5 ⁄ 8 "-1 5 ⁄ 8 " (crown 1 ⁄ 4 ") Cap ac[...]

H7664 2-in-1 Combination Nailer/Stapler -13 - 5. Pull the trigger. — If the nail/staple drove into the wood far enough, continue with your intended operations. — If the nail/staple either went too far or not far enough, then go to the Adjusting Depth sub-section on this page. 2. To test for proper nail/staple penetra- tion, hold the nailer/stap[...]

H7664 2-in-1 Combination Nailer/Stapler -14 - A jammed nail or staple must be cleared before using the nailer/staple r again. To clear a jammed nail or staple from the magazine: 1 . DISCONNECT THE NAILER/ STAPLER FROM THE AIR SUPPLY! 2 . Unlock the catch lever and pull the magazine pusher back completely. 3. Locate and remove the jammed nail/ stapl[...]

H7664 2-in-1 Combination Nailer/Stapler -15 - Figure 7. Opening cover to clear a jam. To clear a jammed nail from the dis - charge area: 1. DISCONNECT NAILER/STAPLER FROM THE AIR SUPPLY! 2. Unlock the catch lever and pull the magazin e pusher back completely. 3. Remove the nail/stap le stick from the magazin e. 4. Loosen the cap screws shown in Fig[...]

H7664 2-in-1 Combination Nailer/Stapler -16 - 6. Open the nose cover as if to clear a jammed nail/staple. 7. Watch the discharge area and push the top of the piston with your finger. You will see the piston shaft slide down the discharge area. 8. With a long flathead screwdriver or similarly shaped tool, push the piston shaft back inside the nailer[...]

H7664 2-in-1 Combination Nailer/Stapler -17 - SE CTION 5 : MAINTENANC E Cleanin g Di sc on nec t th e n ail er/ st ap ler fr om th e air sup ply before cl eani ng. Use a g ood sol vent to c lean the no se as sem bly of the n ailer /st apl er . A lways be sur e t hat th e nai ler/ sta pler is dr y b efore usi ng i t ag ain. Do n ot all ow dus t, c h[...]

H7664 2-in-1 Combination Nailer/Stapler -18 - T roublesh ootin g Symptom Possible Cause Solution Air leaking at trig- ger valve area. 1. O-rings in trigger valve hous- ing are damaged. 1. O-rings must be replaced & operation of safety yoke must be checked. Air leaking between housing and hose. 1. Loose screws in housing. 2. Damaged O-ring. 3. L[...]

H7664 2-in-1 Combination Nailer/Stapler -19 - H7664 Par ts Break dow n                                            ?[...]

H7664 2-in-1 Combination Nailer/Stapler -20 - H7664 Par ts L ist REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH7664001 SPCL CAP SCR M4-.7 X 20 43 PH7664043 SAFETY YOKE 2 PH7664002 AIR DEFLECTOR 44 PH7664044 BAR 3 PH7664003 COMPRESSION SPRING 45 PSB23M CAP SCREW M4-.7 X 12 4 PSB15M CAP SCREW M5-.8 X 20 46 PFH32M FLAT HD SCR M4-.7 X 6 5 PLW01M LO[...]

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warr[...]

H7664 2-in-1 Combination Nailer/Stapler -22 -[...]

WARRANTY CARD Name _________________________________________________________________ Street _________________________________________________________________ City _______________________ State _________________________ Zip _________ Phone # ____________________ Email ________________________ Invoice # _____ Model # ____________________ Order # ____[...]

FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name________________________________ Street________________________________ City______________State______Zip_______ Send a Grizzly Catalog to a friend: Place Stamp Here[...]