Haier HWM-2.0/S инструкция обслуживания

Mini Washing Machine User's manual This manual is for HWM-2.0/S Please read this manual carefully before using. Retain it for future reference.[...]

Names of the parts................................................................................................1 Safety precautions .............................................................................................2 Installation and adjustment ...................................................................................4 Prepara[...]

Meaning and description of the symbols Names of the parts Warning sign Forbidden sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents m[...]

Safety precautions Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not press or nip it with weight. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. Keep the pin of the power plug clean, if the power plug is pollu[...]

Safety precautions T o p rotect your laundries a nd wash- ing machine, p lease t ake out all of the coins, buttons, sand, hairpin and other f oreign materials before washing. Please check if the water faucet is open, and if the connection of the water inlet pipe is proper . It is suggested to use foamless washing powder . Do not decompose, repair o[...]

Installa tion and adjustment The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine, Please adjust it . Adjust the installation position Please install and adjust the machine according to the requirement of the manual. It is very important to your sec[...]

Pr epar a tion before washing Confirm if there's special requirement for the laundries. Clear the pocket. Take out the coins , sand, hairpins etc. Fasten the buttons and zippers. When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion,please put the laundries with buttons into other laundries. Th[...]

The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable[...]

Process washing 1.Put into the laundry and detergent, then fill the water needed. Install th e w ater inlet h ose Insert the water inlet hose into the water-filling entrance on the control panel. The appliance is to be connected to the water mains using new hose-set and old hose-set should not be reused. Water inlet hose Water-filling entrance 2.Cl[...]

About ~ 36 About7~8 About8~10 About2 4 ~ Washing Timer 9 12 15 3 6 4.Washing duration reference Select w ashing d uration d epending o n t he laundry Laundry Washing Duration(min) Silk fabric(thin laundry) Knitted fabric/chemical fabric Bed sheet Cotton, blending or linen fabrics Very dirty or heavy laundry About10~15 5.Finish washing The tumbler s[...]

T roub le shooting (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair . If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by y[...]

User's manual Name One piece One piece One set Quantity Packing list Water inlet hose Mini washing machine Specification W ater level/ W ater quantity (L) W ater inlet pressure MPa 3: 17 2: 12 1: 7 10 Rated washing capacity(kg) One piece Warranty card Max washing capacity(kg)[...]