Haier HWM70-A инструкция обслуживания

User's Manual Specifications the back cover HWM70-A Picking l ist Fuzzy Computeried Automatic Washing Machine Contents Before using Using process Trouble shooting * Answers to ques tions 16 Please read this manual carefully before using. Retain it for future reference Please check if the power receptacle has good earthing condition before usin[...]

Water inlet hose (2 pieces) Names of the part s Before using Before using Before using Before using Meaning and description of the symbols Accessories Bottom plate (1 piece) Water inlet hose jointer (2 pieces) T apping screw (8 pieces) Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Fa[...]

Safety precautions Before using Before using Before using Before using In normal usage of the washing machine, the power plug shall be ready to be pulled or plugged with hand. Be sure to pull the plug off and close the water faucet in following cases: power failure, delivering the machine, setting the machine idle or cleaning the machine. Do not pl[...]

Do not put hand into the rotating tub. It is dangerous even if the rotation speed is slow . T ake special care of the children. Keep children away from the washing machine to avoid them climbing on it. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing mach[...]

Install the bottom plate Adjust the installation position 3 Please install and adjust the machine according to the requirement of the manual, which is very important for you to operate the machine safely and properly . After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the[...]

Before using Before using Before using Before using Inner tub Lint filter After opening the package, please take out the lint filter from the document bag , install it to the filter cover of inner tub. See to the figure. Install the lint filter How to change the direction of the drain hose 1. The height of the drain hose shall be less than 10cm, or[...]

Install the water inlet pipe Connection between the water inlet hose jointer and the water faucet 5 Water faucet, suitable water fauce t, not suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the faucet shall be flat and smooth. If not, please file it smooth to avoid leakage. 2 Loosen the four screws of[...]

6 Dismount the water inlet hose Connection between the water inlet hose jointer and the water inlet hose Check the connection between the water inlet hose jointer and the water faucet 1.Swing the hose gently to check if it is fastened stably . 2.After installation, open the faucet to check if it leaks water. 3.Do not bend the hose by force. 4.Each [...]

Using process Using process 1Pr epar a tion bef or e washing Pay atte ntion to the foll owings before washing Preparation before washing 1 Connect the water inlet hose. Open the water faucet. 2 Confirm that the washing machine is earthed reliably. Then plug the power plug into the receptacle. The earthing terminal shall not link to gas pipeline and[...]

8 Reference weight of the laundries: Working suit up,down Jeans about 800g The capacity of washing and spinning refer to t he largest weight of the sta ndard laundries under dry condition that can be w ashed or spinned in one cycle. Washing quantity for one cycle shall be less than the rated capacity.The largest capacity of this machine is 7.0kg. T[...]

How to use the whitener Standard dosage of the detergent and water quantity Laundries quantity (kg) Water level Water quantity Common powder, Put the washing powder and so ftener i nto the detergent box dire ctly as indicated in the left figu re. After th at, plea se close the det ergent box. Re fer to the following table fo r the usage of the dete[...]

a Description of the function of the operation buttons Balance display If the bulb of the level meter is inside the standard ci rcle, it indicates that the machine is horizontal. Cool water WA TER INLET button CURRENT button When the washing machine starts runnin g, it will set the current automatically . You can select current by self according to[...]

Standard Common washing Night Low noise washing during night Gentle W ashing the woolen textiles or underwear FA ST 10-minute quick washing of laundries with light soil PROGRAM button The following four programs are available for your option SURPLUS RESERVE HOURS LATER FAST GENTLE FUZZY STAN DARD NIGHT SOAK WAS H RINSE SPIN START PAUSE SELECT PROGR[...]

2 Push the program button to select suitable automatic program. 3 Push the select button to select suitable procedure. After switching on the power , the washing machine will set to WASH-SPIN procedure automatically. It is the common procedure. To select other procedures, push the SELECT button to select one or more procedures from SOAK, WASH, RINS[...]

Even there's no water in the tub, a certain period is required before spin starting. Do not use the SOAK program for the woolen textiles. Separate the laundries that are not colorfast from other laundries in washing. Procedure selection method Times of pushing t he SELECT button Push the SELECT button for 6 times, and it will resume the initia[...]

7 Push the RESERVE button to select suitable reserve wash program 6 Push the CURRENT button to select suitable water current 8 Push the ST ART/PAUSE button 5 Close the top lid. 6 T he washing is finished. After the power is switched on, the reserve program is set to off mode automatically. If you need to set the washing procedure to be finished at [...]

7 Disposal After W ashing If the cabinet is dirty , wipe it with wet soft cloth Do not wash with water directly . Wipe with neutral detergent. Do not wipe with thinner, petrol, alcohol, etc. 1.After washing, close the water faucet. (If desired, dismount the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the [...]

There may be some water flowing out of the drain hose in the first use of the machine. It is the water remained in the machine during the ex-factory performance inspection. Phenomenon Reason How to solve It rings after starting the reserve function. The digitron displays E0. The water faucet leaks water There's abnormal sound inside the machin[...]

Packing list Name User's manual Lint filter Water inlet hose component Bottom plate T apping screw Fuzzy logic automatic washing machine Quantity Inside the document bag Inside the document bag Storage position Inside the accessory bag Between the upper cushion of the washing machine package and the upper seal of the package carton Inside the [...]

Model Rated voltage frequency Max water consumption Rated washing power Rated spinning power Weight Dimensions (mm) HWM70-A 220V ~ 60Hz 7.0kg 400W 240W About 38kg L 610 W 555 H 945 Water level/Water quantity (about) Water inlet pressure Specifications Specifications Rated washing / spinning capacity 1/23L, 2/30L, 3/34L, 4/40L, 5/44L, 6/49L, 7/53L, [...]