Haier HWMP50F инструкция обслуживания

Fully Automatic W ashing Machine User's manual This manual is for HWMP50F Please read this manual carefully before using. Retain it for future reference.[...]

CONTENTS CONTENTS the 2nd cover Names of the parts 1 Safety precautions 2 Installation and adjustment 4 Install the water inlet hose 5 Preparation before washing 6 Put in the laundries 7 Usage of the detergent Use the operation buttons 8 Finish washing 10 Disposal after washing 11 T rouble-shooting Answer to question 12 Packing list 13 Specificatio[...]

1 Names of the par ts Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Contents marked with that symbol are actions forbidden to perform. Perform[...]

2 Saf ety prec autions The ventilation holes at the bottom Soft object Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacleis loose, do not use the plug any more. If washing machine is supplied from a cord extension set or electrical portable outlet device, no cord extension set or electric[...]

Do not put hand i nto the rotating tub. It i s d angerous even i f th e r otation speed i s s low . T ake special care of the children. Keep c hildren away f rom the washing machine to avoid them climbing on it. The appliance i s n ot instruct for use of young c hildren of infirm persons without supervision. Y oung children should be supervised t o[...]

Install the bottom plate After you open the package, please lean the washing machine gently down on Soft object ( like the towel cloth,blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently . See to the figure: 4 Please install and adjust the machine accor[...]

5 Install the water inlet hose 1. Insert a new flat washer into each end of the inlet hoses. Firmly put the washers in the coupling. 2. Connect the water inlet hoses to the water faucet. Use the new hose sets supplied with the washer. Any other old hose sets should not be used. You may have to use pliers to tighten the coupling. Do not over tighten[...]

6 1.Pr epar a tion bef or e washing Preparation before washing 1.Connect the water inlet hose 2.Confirm that the washing machine is earthed reliably .Then insert the power plug into the receptacle.Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Do not put down the drain hose. 4.Slanting or uneven ground may result in unstabl[...]

2.Put in the laundries The capacity of washing of the machine refer to the largest weight of the standard laundries under dry condition that can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity . The thickness ,size , type of the cloth will influence the actual washing capacity . It is suitable t[...]

Process,remain time digitron It displays "--" during detecting. It displays total remained time (min). If the total time exceeds 99 minutes, it uses "A" on tens digit to represent100 minutes, and uses "b" to represent 110 minutes. E.g. A3" represents 103 minutes. It displays abnormal symbol in abnormal situation. [...]

WATE R LEVEL POWER ON/OFF ST ART P AUSE HWMP50F WAR M HOT COLD NORMAL HEA VY QUICK WASH SPIN ONL Y SOAK WAS H RINSE SPIN TEMP SELECT TIME REMAINING WA SH CYCLE W ASH CYCLE FUZZY W ASH CYCLE POWER ON/OFF Program select 12 1.Push "POWER ON/OFF"button to switch on the power 2.Push " W ASH CYCLE " button to select suitable automatic[...]

10 3 Push the " W AT ER LEVEL "button,select suitable water level After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it can set the water level automatically . T o select other water level, first push the " ST ART/P AUSE " button, then push the "W[...]

Clean Clean the detergent box and set it on the control panel seat. The lint filter must be used during washing. It must be cleaned in time after each using. Lint filter: 1.Pull it up to dismantle. 2.Push it down to install. 3.Clean the filter screen after washing. Dismantle Install Dismantle Install The filter screen of the water inlet valve is li[...]

12 T r ouble-shooting Ans wer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.[...]

Packing list Lint filter Automatic washing machine Between the upper cushion of the washing machine package and the upper seal of the package carton. Bottom plate One Inside the accessory bag Eight T apping screws Tw o Inside the accessory bag Inside the document bag One One Components of the water inlet hose User's manual Inside the document [...]

Specifica tion table Model Rated voltage/frequency Rated washing power Rated spinning power Weight Dimensions (mm) HWMP50F 220-240V 50Hz 380W 300W About 35kg L 520 W 530 H 890 Water inlet pressure 0.03Mpa-1.0MPa (when water temperature is 70 ~90 , the water inlet pressure of hot water shall not exceed 0.4MPa) Type Fully Automatic Washing Machine[...]