Harbor Freight Tools 92274 инструкция обслуживания

1/3 HP PEDEST AL SUMP PUMP ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com Copyright 2004 by Harbor F reight T ools ® . All rights reser ved. No por tion of this manual or any artwork contained herein may be reproduced in any shape or form without the e xpre[...]

PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety w a r nings and precautions, assemb ly , operating, inspection, maintenance and cleaning procedures, par ts list and assembly diagram. K eep your in voice with this manual. Write the inv oice number on the inside of the front cov e r . K eep this manual and inv o[...]

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY 1. Grounded tools m ust be plugged into an outlet properl y installed and grounded in accordance with all codes and or dinances. Never remove the gr ounding prong or modify the plug in an y way . Do not use an [...]

2. Dress properl y . Do not wear loose clothing or je welry . Contain long hair . K eep y our hair , c lothing, and gloves a w a y from mo ving parts. Loose clothes, je welry , or long hair can be caught in moving par ts. 3. A v oid accidental star ting. Be sure the circuit suppl ying electrical power is off before plugging in. Plugging in a Sump P[...]

7. Use only accessories that are recommended by the manufacturer for your model. Accessor ies that may be suitab le for one tool ma y become hazardous when used on another tool. SER VICE 1. T ool ser vice must be performed onl y by qualified repair per sonnel. Ser vice or maintenance perf or med b y unqualified personnel could result in a risk of i[...]

SKU 92274 For technical questions, please call 1-800-444-3353. P AGE 6 V ~ A no xxxx/min. No Load Revolutions per Minute (RPM) Amperes V olts Alternating Current Underwriters Laboratories, Inc. Canadian Standards Association Double Insulated SYMBOLOGY FIGURE B 3. Y our tool must be plugged into an appropriate outlet, proper ly installed and grounde[...]

SKU 92274 For technical questions, please call 1-800-444-3353. P AGE 7 1. Maintain labels and nameplates on the Sump Pump. These carr y impor tant information. If unreadable or missing, contact Harbor F reight T ools f or a replace- ment. 2. Use the right product f or the right job. There are cer tain applications f or which this product was design[...]

SKU 92274 For technical questions, please call 1-800-444-3353. P AGE 8 6. W ater transfers in c ycles. Do not attempt to manipulate the automatic Switch (3) to keep the Sump Pump running continuously . It is meant to shut off inter mittently . Doing so will damage the Pump . 7. Make sure the discharge pipe (not included) is secured to a solid surfa[...]

SKU 92274 For technical questions, please call 1-800-444-3353. P AGE 9 ASSEMBL Y AND OPERA TING INSTRUCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Dia gram on page 14 . 1. If necessar y , hav e a cer tified electr ician install (within six feet of where the Sump Pump will be locate[...]

SKU 92274 For technical questions, please call 1-800-444-3353. P AGE 10 7. Connect the 1-1/4” diameter Discharge Pipe to the Impeller Case (22) of the Sump Pump . Make sure to hand tighten only . Ov er tightening ma y cause the Impeller Case to crack. NOTE: Make sure the Discharge Pipe is secured to a solid surface, with appropriate hardware (not[...]

SKU 92274 For technical questions, please call 1-800-444-3353. P A GE 11 C. Power Cord may not be making contact in electrical outlet. Check connec- tion. D. Float may be obstructed. Make sure the Float is free and not rubbing against the pit wall or other obstruction. 3. Pump Motor Runs, b ut does not discharge water . A. Check V alve (not include[...]

INSPECTION, MAINTENANCE, AND CLEANING SKU 92274 For technical questions, please call 1-800-444-3353. P AGE 12 1. W ARNING! Make sure the Sump Pump is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 2. Before each use, inspect the general condition of the Sump Pump. Check for clogs througho[...]

P A RTS LIST SKU 92274 For technical questions, please call 1-800-444-3353. P AGE 13 NOTE: Some parts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts. Part # Description Qty. Part # Description Qt y . 1 Power Cord 1 14 Rotor 1 2 Screw 2 15 Fan 1 3 Switch 1 16 Front Cover 1 4 Motor Rear [...]

ASSEMBL Y DIA GRAM SKU 92274 For technical questions, please call 1-800-444-3353. P AGE 14 NOTE: Some parts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts.[...]