Harbor Freight Tools 92863 инструкция обслуживания

GENERA T OR 6 HP R OBIN ENGINE RECOIL ST AR T 2800 W A TT (PEAK) Model 92863 OPERA TING INSTR UCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www .harborfreight.com Copyright 2005 by Harbor F reight T ools ® . All rights reserved. No por tion of this manual or any artwork contained herein may be reproduced in [...]

PRODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this man ual f or the saf ety wa r nings and precautions, oper ating, inspection, maintenance and cleaning procedures , par ts list and assemb ly diagram. Keep y our in v oice with this manual. W rite the inv oice n umber on the inside of the front cover . K eep this manual and invoice in a [...]

W ORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate the Generator and power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Generators and power tools create sparks which may ignite the dust or fumes. 3. Keep bystanders, children, an[...]

6. Do not abuse Power Cords on tools. Never use a Power Cord to carry the tools or pull the Plug from the Generator’ s outlet. K eep P o wer Cords awa y from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately . Damaged P ow er Cords increase the r isk of electric shock. PERSONAL SAFETY 1. Stay alert. W at c h what yo[...]

2. Store idle generators out of reach of children and other untrained persons. Generators are dangerous in the hands of untrained users. 3. Maintain the Generator with care . Do not use a damaged Generator . T a g damaged Generators “Do not use” until repaired. 4. Check for misalignment or binding of moving parts, breakage of parts, and an y ot[...]

SKU 92863 For technical questions, please call 1-800-444-3353. P A GE 6 Installation Precautions: 1. WARNING! Bef ore using the Gener ator, read and understand the Engine man ufacturer’ s Operation, Maintenance, and P ar ts man ual. Also , read the safety precautions in this manual. These should alw ays be f ollowed to reduce the r isk of persona[...]

1 1. For trailer installation, the Generator should be mounted on the center point of the trailer , o v er the wheels. Consult y our local DMV for possible installation regulations. 12. Install sound and weather proofing only when it is not raining or snowing to avoid tr apping moisture within the Generator’ s area. Fire And Explosion Precautions[...]

2. Chec k f or damaged par t s . Bef ore using the Gener ator , any par t that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts, any broken parts or mounting fixtures, and any other condition that may aff ect proper oper ation. A[...]

Electrical Precautions: 1. All connections and conduits from the Generator to the load must only be installed by trained and licensed electricians, and in compliance with all relevant local, state, and federal electrical codes and standards, and other regulations where applicable. 2. The Generator must be earth-grounded in accordance with all relev[...]

9. Insulate all connections and disconnected wires. 10. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. 1 1. Use only Class BC or Class ABC fire e xtinguishers on electrical fires . INST ALLA TION 1. NO TE: Prior to pow er ing tools and equipment, mak e sure th[...]

5. Place the Generator as close as possible to the electrical tools and equipment being powered to reduce the length of extension cords. 6. If the Generator in located indoors, or in a Generator house, the Engine exhaust must be ventilated to the outdoors using leakproof, heat resistant, flexible, metal, flex tubing. GENERA T OR SUPPORT AND MOUNTIN[...]

OPERA TING INSTRUCTIONS NOTE: For additional references to the parts discussed in the following pages, ref er to the Assembl y Diagram on page 18 of this manual. Pre-Start Checks: 1. Bef ore operation, it will be necessary to ref er to the Engine manuf acturer’ s Operation, Maintenance, and P ar ts manual (included) for detailed inf or mation abo[...]

FUEL T ANK (32) 5. Bef ore the first use, remov e the Fuel T ank Cap (30) and fill the Fuel T ank (26) with unleaded gasoline . Then, replace the Fuel T ank Cap . Thereafter , chec k the Engine’ s Fuel Gauge (27) f or the amount of unleaded gasoline in the Fuel T ank. If necessary , refill the Fuel T ank with unleaded gasoline. (See Figure D.) SK[...]

SKU 92863 For technical questions, please call 1-800-444-3353. P A GE 14 FUEL CHOKE “ON/OFF” SWITCH FUEL V A L VE (25) ST A R TER ROPE FIGURE E P o wering T ools And Equipment: 1. Prior to powe r ing tools and equipment, mak e sure the Generator’ s rated v oltage, wattage , and amperage capacity (120V/20 AMPs) is adequate to supply all electr[...]

3. NO TE: The Generator f eatures an A C Non-Fuse Circuit Breaker (34) to protect the A C circuit in case of an ov er load. Should an ov er load occur the Circuit Breaker will “trip”, causing the Generator to automatically shut down. In this case , ref er to Step #1. Then, reset the circuitr y system by depressing the Circuit Break er . Restar [...]

3. Before each use: Inspect the general condition of the Gener ator. Check f or loose screws , misalignment or binding of moving par t s , cracked or brok en par t s , damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not us[...]

P ARTS LIST NOTE: Some par ts are listed and sho wn for illustr ation pur poses only , and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF A CTURER AND/OR DISTRIBU T OR HAS PR OVIDED THE P AR TS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y . NEITHER THE MANUF ACTURER OR DIST[...]

NO TE : Some par ts are listed and sho wn for illustration purposes only , and are not a vailab le individually as replacement par t s. ASSEMBL Y DIAGRAM SKU 92863 For technical questions, please call 1-800-444-3353. P A GE 18 REV 08/05[...]

SKU 92863 For technical questions, please call 1-800-444-3353. P AGE 1 9 ELECTRICAL SCHEMA TIC REV 08/05[...]