Hawking HWU54D инструкция обслуживания

[...]

LIMITED WARRANTY Hawking Technology guarantees that every HWU54D Hi-Gain Wireless-G USB Network Adapter is free from physical defe cts in material and w orkmanship under normal use for two (2) years from the date of purchase. If the product proves defective during this two-year warranty period, call Ha w king Customer Service in order to obtain a R[...]

Federal Communication Commission Interference S t atement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can ra[...]

Federal Communications Commission (FCC) RF Exposure Requirements SAR compliance has been established in the laptop computer(s) co nfigurations with PCMCIA slot on the side near the center , as tested in the application for Certification, and can be used in laptop computer(s) with substantially similar physical dimensions, construction, and electric[...]

CONTENTS 1 INTRODUCT ION ............................................................................. 6 1.1 Features 6 1.2 Specifications 6 1.3 Package Contents 7 2 INSTALLATION PROCEDUR E ..................................................... 8 3 CONFIGURATION UTIL ITY ....................................................... 13 3.1 W ireless Connec[...]

1 Introduction Thank you for purchasing the Hawking Hi -Gain 6dBi Directional USB Wireless-G Network Adapter . This Hi-Gain Wireless- G USB Adapter is designed to comply with the IEEE 802.1 1g Wireless LAN standard and has enough power to extend the reach of your wireless network. The integration of Hawking’ s proven Hi-Gain 6dBi Directional Ante[...]

• Data Rate: 54/48/36/24/18/12/11/9/ 6/5.5/2/1Mbps auto fallback • Security: 64/128/256-bit WEP Data Encryption, WPA (IEEE 802.1x with TKIP) and AES • Antenna: Directional 6dBi Hi-Gain Ante nna • Drivers: Windows 98/SE/ Me/2000/XP/2003 Server • LED: Link/Activity • Transmit Power: 22~23 dBm (Typical) • Dimension: 4.75”(H) x 3”(W) [...]

2 Installation Procedure Before you proceed with the installation, please notice following descriptions. Note1: Please do not install the USB adapter into your computer before installing the software program from the CD. Note2: The following installation was operate d in Windows XP. (Procedures are similar for Windows 98SE/Me/2000/2003 Server. ) No[...]

B. If you want to install the sof tware program in another location, click “Browser” and select an alternative destination. Then, click “Next”. 9[...]

C. Click “Continue Anyway” to finish the installation. II. Install the USB Adapter A. Plug the USB Adapter into the USB port of your computer . B. The “Found New Hardware Wizard” is displayed, select “Install the sof tware automatically (Recommended)” and click “Next”. 10[...]

C. Click “Continue Anyway” and the system will start to install the USB adapter . 11[...]

D. Click “Finis h” to complete the installation. III. Using the Conf iguration Utility T o setup the USB adapter , double-c lick the icon in the system tray . For Windows XP , there is a “Windows Zero C onfiguration T ool” by default for you to setup wireless clients. If you want to us e the Hawking Utility of the USB adapter , please follo[...]

3 Configuration Utility The Configuration Utility is a powerful application that helps you configure the Hawking T echnologies 802.1 1g Wireless LA N Hi-Gain USB Adapter and monitor the link status during the communication process. The Configuration Utility appears as an icon on the system tray of Windows while the card is running. Y ou can open it[...]

Parameter Description Mode Stat io n – Set the USB adapter as a wireless client. Access Point – Allows the USB adapter to function as a wireless AP . Please refer to Sect ion 3.5 for the AP settings. Network Adapter Displays the produc t information of the USB Adapter . Available Network Display all the SSID an d Signal S t rength of wireless s[...]

BSSID Display the MAC Address of the network the adapter is connecting to. Parameter Description Signal S trength This bar shows the signal strength level. The higher percentage shown in the bar , the more radio signal been received by the adapter . This indicator helps to find the proper position of the wireless stati on for quality netwo rk opera[...]

General Connection Setting Channel Selects the radio channel to be used for wireless networking. The channel setting of the wireless stations within a network should be the same. Parameter Description Tx Rate There are several options including Auto/1/2/5.5/1 1/6/9/12/18/24/36/48/54Mbps for you to select. When the “Auto” is selected, the device[...]

Parameter Description Authentication Mode This setting must be consistent with the wireless networks that the adapter intends to connect with. Open System – No authentication is required Shared Key – Only wireless stations using a shared key (WEP Key identified) are allo wed to connect with each other . Auto – Auto switch the authent ication [...]

1.6 WEP and WPA Encryption WEP is a dat a encryption algorithm, whic h protects Wireless networks from outside intruders or “eavesdropping.” The sec ond generation of WEP is WP A (Wi-Fi Protected Access) which combin es IEEE 80 2.1x and TKIP (T emporal Key Integrity Protocol) technologies. WP A provides higher security standards as well as the [...]

Parameter Description Key1 ~ Key4 The keys are used to enc rypt data transmitted in the wireless network. Fill the text box by following the rules below . 64-bit – Input 10-digit Hex values or 5-digit ASCII values as the encryption keys. For exam ple: “0123456aef“ or “Guest“. 128-bit – Input 26-digit Hex values or 13-digit ASCII values [...]

Parameter Description Connect Information It is the setting for WP A mode. Protocol This adapter suppor ts two kind of protocol for authentication including TLS and PEAP . TL S and PEAP requires a certificate which is provided by the Certif icate Server . PEA P requires a set of user name and password in addition. T o get the certificate and the pe[...]

Pre-shared Key It is the setting for WP A-PSK mode. Input a key that is 8 to 63 digits in length using ASCII format as the password for the authentication within the network. Certificate All the available certificates for TLS or PEAP will display in the list. Please select a proper certificate for wireless authentication. Parameter Description WEP [...]

enabled: English and Chinese. Country Roaming IEEE 802.1 1d (Country R oaming) is a standard that enable the wireless devices work at the proper transmission power and radio channel regulated by the country where the user is located. World Mode – Enable the country roaming function, the adapter will follow the setting of the connecting AP automat[...]

1.8 Software AP Mode The HWU54D Hi-Gain USB Wireless-G adapter has a unique feature t hat allows it to function as a Wireless Access Point. By changing the mode in the Configur ation Utility the HWU54G can provide wireless access to surrounding clients. Configuring the AP parameters such as channel, SSID, MAC Address Filtering, WEP encryption and s[...]

the AP successfully . RX Frame It shows the number of data frames which are received by the AP successfully . 3.1.4 AP General Connection Setting Click “More Setting”, users are allowed to se tup the AP connection setting, Encryption Setting and other advanced functions. Parameter Description General Connection Setting Channel Select the number[...]

Parameter Description Tx Rate There are several options including Auto/1/2/5.5/1 1/6/9/12/18/24/36/48/54Mbps for you to select. When “Auto” is selected, the device will choose the most suitable transmission rate automatically . The higher data rate you designate for the network, the shorter the distance is allowed between the adapter and the wi[...]

Authentication Mode Open System – No authentication is needed for connecting to the AP . Shared Key – Only wireless adapters using a shared key (WEP Key identified) are allowed to connect to the AP . Parameter Description Fragment The value defines the maximum size of packet s, any packet size larger than the value will be fragmented. If you ha[...]

Parameter Description Filter T ype Disable – Disable the MAC Address filter function. Accept – Only the wireless adapt ers with the MAC Address setup in the table can connect to the AP . Reject – The wireless adapters wit h the MAC Address setup in the table will be rejected to connect to the AP . Filter MAC Address MAC Address is a unique id[...]

4 Troubleshooting This chapter provides solutions to problems usually encountered during the installation and operation of the adapter . 1. What is the IEEE 802.1 1g standard? 802.1 1g is the new IEEE standard for high-speed wireless LAN communications that provides for up to 54 Mbps dat a ra te in the 2.4 GHz band. 802.1 1g is quickly becoming the[...]

5. What is Infrastructure ？ An integrated wireless and wireless and wir ed LAN is called an Infrastructure configuration. Infrastructure is applicabl e to enterprise scale for wireless access to central database, or wireless application for mobile workers. 6. What is BSS ID ？ A specific Ad hoc LAN is called a Basic Service Set (BSS). Computers [...]

12. What is DSSS ？ What is FHSS ？ And what are their differences ？ Frequency-hopping spread-spectrum (FHSS) uses a narrowband carrier that changes frequency in a pattern that is k nown to both transmitter and receiver . Properly synchronized, the net effect is to maintain a single logical channel. T o an unintended receiver , FHSS appears to [...]