Hayter Mowers 415A инструкция обслуживания

(Wheeled Push) (English V ersion) FROM SERIAL NO: 415A001001 HANDBOOK: 415020 (REV .0.) ISSUE 05.1 1.02 CODE 415A OWNER'S HANDBOOK Ranger 41[...]

Engine Briggs & Stratton Quantum XTS 50 Engine type 12F802-1325-01 Engine/Cutterbar speed 3000 rpm Fuel type Unleaded petrol Fuel capacity 1.5 litres Oil type SAE 30 engine oil Oil sump capacity 0.6 litres Cutting width 410mm Cutting height 20 - 70mm Overall dimensions 1050 x 446 x 1375mm Dry W eight 34 Kg 1 Air Cleaner 2 Fuel Filler Cap 3 Oil [...]

1.19 - Thr ottle Cable Adjustment 1.19 - Carbur ettor Adjustments 1.20 - Oil Service 1.20 - Air Cleaner Service 1.21 - Spark Plug Service 1.21 - Keeping Engine Clean 1.21 - Grassbag 1.22 - Deck Housing 1.22 - Securing Nuts and Bolts 1.23 - Lubrication 1.23 - Cutterblade Removal 1.24 - Cutterblade Assembly 1.24 - Cutterblade Sharpening 1.25 - Storag[...]

INTRODUCTION 1.4 Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your mower . IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications. Read and unde[...]

W ARRANTY 1.5 LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of the engines furnish their own warranty and services are provided through their authorised [...]

SAFETY PRECAUTIONS 1.6 This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used correctly . Failur e to observe the following precautions may r esult in serious injury . Before using the mower [...]

PRECAUTIONS SAFETY 1.7 - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replace[...]

Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug le[...]

SAFETY PRECAUTIONS 1.9 Allow the engine to cool before storing in any enclosure. T o reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety . If the fuel tank has to be drain[...]

ASSEMBLING THE MOWER 1.10 Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Engine Handbook. 2. W arranty Reg. Card. 3. Grassbag. T o prevent accidents cut off the long ribbon attached to the grass- bag and discard. Unscrew the handle[...]

MOWER THE ST AR TING 1.11 T o prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil. T o prolong the life of your engine it is important th[...]

Controls Check that the engine stop lever returns freely to its rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘ choke ’ position. Move the throttle control lever to the ‘ choke ’ position before starting a cold engine. Move the throttle control lever[...]

MOWER THE OPERA TING 1.13 T o turn steer the mower with the handlebar in the direction required. T o make a tight turn, apply downward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction. T o prevent accidents do not raise the fr ont of the mower exces- sively when making a turn. Never rai[...]

1.14 T o prevent accidents thor oughly inspect the area and remove all objects which when contacted by the mower cutterblade could become dangerous pr ojectiles. Inspect the area for hidden obstruc- tions which when contacted by the cutterblade could risk health and safety . Remember the location of these obstructions and ensure that you mow ar oun[...]

1.15 The cutterblade is driven by the engine via a friction disc to help pre- vent damage occurring to the engine crankshaft and cutting mecha- nism when a hidden obstruction or overload is encountered. Always stop the engine when a hidden obstruction or excessive vibra- tion is encountered. Disconnect the spark plug lead and examine the cutting me[...]

1.16 There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary . The yearly lawn work programme really starts this month. As soon as the ground conditions a[...]

1.17 Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow . Rake out the thatch from the t[...]

1.18 After the very first five hours change the engine oil. Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty , dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. Check the oil level Remove grass d[...]

1.19 T o prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . 1. Air Filter 2. Fuel Cap 3. Start Grip 4. Oil Cap/ Dipstick 5. Exhaust Guard 6. Spark Plug / Lead Loosen casing clamp screw (1) and move the governor lever (2) in the direction of screw (1) as far as posib[...]

1.20 Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engin[...]

1.21 BRIG GS & ST R A T T ON H A R R I E R 41[...]

1.22 Remove grass debris from the top and underside of the deck housing immediately after use. Fertilisers and top dressings ar e particularly corrosive. Thoroughly clean the mower deck immediately after use on tr eat- ed grass and store well away fr om corrosive materials. Regularly check that all securing nuts and bolts are tight. Replace missing[...]

1.23 Drain the fuel by running the engine until the fuel tank is empty and the engine stops. Remove the spark plug lead and allow the engine to cool. T urn the mower on its left hand side and ensure that the air cleaner side of the engine is uppermost. Firmly grip the end of the cutterblade with the gloved hand and remove the bolt, spring washer an[...]

1.24 Assemble the cutterblade with the turned up edges facing towards the engine. Secure the cutterblade using the bolt (1), spring washer (2), and distance piece (3) and tighten to a torque of 54Nm A slightly worn cutterblade may be re-sharpened. Both blade edges must be sharpened equally to ensure balance. Sharpen the cutterblade every 25 mowing [...]

1.25[...]

PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Engine stop lever released. Operate engine stop lever . Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Engine smokes Excess oil level. Check oil level. Air cleaner cartridge oil Service air cleaner . soaked or blocked. Engine runs then stops Fuel starvation[...]

PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose. T ighten bolts Cutterblade bolt loose. T ighten bolt Cutterblade out of balance. Balance cutterblade Bent crankshaft. Consult your dealer Uneven cut Undulating ground conditions Change direction of travel Cutterblade worn Sharpen the cutterblade Cutterblade out of bal[...]

DECLARA TION OF CONFORMITY 1.28 VIBRA TION INFORMA TION Hand/arm vibration level measured to the procedure in European Standard EN 836 Code 415A = 7.0ms -2. . EC DECLARA TION OF CONFORMITY HA YTER LIMITED, Spellbrook, Bishop’ s Stortford, Herts CM23 4BU ENGLAND declare that the lawnmowers: Models: Ranger Machine T ype No. CODE 415A Category: Push[...]

PA R T S 1 Mainframe 410010V 1 2 Guard Foot 415016W 1 3 Screw - T aptite M6x16 09365 25 4 Rod - Deflector 305103 1 5 Key - W oodruff 1662 1 6 Decal - Grass Blade 410064 1 7 Engine - B&S Quantum XTS50 410007 1 8 Decal - Engine 398013 1 9 Cover - Nut M8 234051 2 10 Nut - Nyloc M8 09441 2 1 1 Knob - HOC 480134 1 12 Spring - Deflector 410030 1 13 W[...]

42 Plug - Drive Small 300144 4 43 Ratchet - HOC 415014 1 44 Decal - HOC 320006 1 45 Screw - Self T ap Engine 09349 3 46 Underdeck - Assy 410015 1 Inc. 21,47,48,50 47 Chute 410058 1 48 Nutsert 410076 1 49 Cover - Underdeck 410060 1 50 Throwplate 410059 1 51 Axle - Front W/A 410051 1 52 Bearing - Front Axle 410069 2 53 Hub - Cap 219143 4 54 Nut - Nyl[...]

PA R T S LIST 1.31[...]

Mower Serial No:................................................................................. Engine Model:.................................. T ype:....................................... Code:..................................... Notes: 1.32 /NOTES INFORMA TION CUST OMER[...]

Gardening Tools Direct - Leaders in Garden Machinery Blower Vacs Blower Vacs Brushcutters Brush cutters Chainsaws Chain saws Chain saws Cultivators Cylinder Lawn Mowers Cylinder Mowers Fertiliser Echo Chainsaws Echo Chainsaws Echo Strimmers Electric Chainsaws Spreaders Garden Blowers Garden Blowers Garden Rollers y Garden Shredders Garden Tractors [...]

Three Great Lawn Mowers Three Great Lawn Mowers Discounted Lawn Mowers Brush Cutter Selection Atco Lawn Mowers Kawasaki Brushcutters Kawasaki Brushcutters Discounted Brushcutters Grit Spreaders Salt Spreaders H usqvarna Rid er Tractors H usqvarna Rid er Tractors Sledges[...]