Hitachi P50S601 инструкция обслуживания

PLASMA TELEVISION O p e r a t i n g G u i d e f o r P 5 0 S 6 0 1 IMPORTANT SAFETY INSTRUCTIONS.......................................................................................2-3 FIRST TIME USE ......................................................................................................................... 4-21 THE REMOTE CONTROL....[...]

Important Safety Instructions SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HIT ACHI PLASMA TELEVISION Our reputation has been built on the quality, performance, and ease of service of HITACHI plasma televisions. Safety is also foremost in our minds in the design of these units. To help you operate these products prope rly, this section illu strates saf[...]

3 Important Safety Instructions Power source This plasma television is designed to operate on 120 volts 60 Hz, AC current. Insert the power cord into a 120 volt 60 Hz outlet. The mains plug is used as the To prevent electric shock, do not use the plasma television’s (polarized) plug with an extension cord, receptacle, or other outlet unless the b[...]

4 Accessories First time use Check to make sure you have the following accessories before disposing of the packing material. Power Cord Remote Control 1.5V batteries Power Swivel Table Top Stand (included) Two “AA” size, CAUT ION: 1. Ceili ng m ounting is not recom mend ed. Mo unting the panel on the cei ling do es not pr ov id e ad eq ua te v [...]

A A B 4 in. 10 cm 12 in. 30 cm 50 " 5 1. Using metallic wire (two places) fasten the set to the clamping screw on the rear of the Plasma TV as shown below . Securing to a Wall 2 . Keep the Plasma television 4 inches away from the wall except when mounted using the wall mount bracket. 3 . Secure the television to the wall as shown . NOTES: 1. D[...]

6    Pass the AC cord through Clamp #1 and connect The AC cord, power swivel cable and the signal cables can all be held together with Clamp #2 (included on the accesories bag). AC CORD Clamp #2: Use this clamp to hold the AC cord, power swivel connector and the signal cables. Clamp #1 : Pass the AC cord through this clamp ; then pull the [...]

7 How to set up your new HIT ACHI Plasma T elevision STEP (1) : Please locate t he STAND METAL on the back of the TV . This m etal is use to hold the TV and the Base ; so it needs to remove 4 screws from the STAND base in order to separate the TV from the Base. STAND METAL STEP (2) : P lease remove the 4 screws of the STAND metal from the T V, now [...]

8 First time use How to set up your new HIT ACHI Plasma T elevision VIEWING The best pictur e is seen by si tting directly in front of the TV and about 10 to 18 feet from the screen. During daylight hours, reflections from outside light may appear on the screen. If so, drapes or screens can be used to reduce the reflection or the TV can be located [...]

9 First time use 300-Ohm T win Lead This outdoor antenna cable must be connected to an antenna adapter (300-Ohm to 75-Ohm). Phono or RCA Used on all standard video and audio cables which connect to inputs and outputs located on the television’ s rear jack panel and front control panel. “F” T ype 75-Ohm Coaxial Antenna For connecting RF signal[...]

10 First time use Quick Reference Remote Control Buttons and Functions In addition to controlling all of the functions on your HIT ACHI Plasma TV , the new remote contr ol is designed to operate different types of devices, such as, DVD Players, CBL (Cable Boxes), set-top-boxes, satellite receivers, and VCRs. The remote control must be pr ogrammed t[...]

11 First time use PUSH TO OPEN CONTROL DOOR FRONT VIEW PUSH EJECT UPGRADE CARD (SERVICE USE ONL Y) ! " # $ % & ' Press this button to turn the Plasma Television ON/ OFF. It can a lso b e tur ned ON/ OFF by remo te control. The “MAIN POWER” button must be at stand-by mode. % MENU/SELECT button Thi s butt on al low s you to en ter t[...]

12 First time use REMOTE CONTROL sensor Point your remote at this area when selecting channels, adjusting volume, etc. ! INPUT- FRONT JACKS I NP U T - FR O N T p ro v id e c om po s it e V i d eo ja c ks f or connecting equipment with this capability , such as a DVD player or Camcorders . Fr ont Panel Controls POWER light indicator T o turn the TV [...]

13 First time use Rear Panel Connections % # " $ ' ! ( & * Antenna Input To switch betwee n C able and Air input, go to the Channel Manager option to change the signal source CABLE or AIR. % Audio/Video Inputs 1, 2 and 3 By u si ng t he I NPUT S bu tton , th e CU RSOR P AD ( 왖 and 왔 ), and the SELECT button or CURSOR PAD 왘 of th[...]

14 First time use PUSH EJECT UPGRADE CARD (SERVICE USE ONL Y) The FRONT panel jacks are provided as a convenience to allow you to easily connect HDMI or DVI signals from a DVD, Set Top Box , Video Game as shown in the following examples (When connecting DVI signal it will OUTPUT L R DI G IT A L O UT P UT D V I t o H D MI C a ble Back of HDTV Set-To[...]

15 First time use The FRONT pane l jacks are provided a s a convenience to a llow you to easily connect a camcor der , DVD, V ideo Game and a VCR as shown in the following examples: NOTE:1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal. Connecting Exter nal Video[...]

16 First time use NOTE: Cables are optional, except when specified. HDMI DIGITAL OUTPUT CAPABILITY HDMI OUTPUT HDMI to HDMI VCR #1 Cable TV coaxial cable 2-Way signal splitter Outside Antenna ANT IN OUTPUT S-VIDEO V L R DIGIT AL OUTPUT CAP ABILITY DIGITAL OUTPUT OUTPUT Y P B P R L R HDTV Set-T op Box DVD Player DVI to HDMI AUDIO OUT OUTPUT Y P B /C[...]

17 First time use Tips on Rear Panel Connections • S-VIDEO, Y - P B P R , or HDMI connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature. • If you r d evi ce has on ly o ne a ud io o ut put (m ono so und ),[...]

First time use 18 Back of VCR OUTPUT VCR Video CONNECTING A VIDEO AND STEREO AUDIO SOURCE TO INPUT1 ~ INPUT-FRONT 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (V ID EO) jack , as sho wn o n th e R ea r Pane l to the right. 2. Co nne ct t he ca ble fr om th e AUD IO OU T R of t he VCR or the laserdisc playe[...]

19 First time use C ON NE C TI NG A CO M PO NE N T SO U RC E W IT H H DM I O R 1. Connect the HDMI or DVI to HDMI connection cable from the output of the HDTV set top box or DVD player to the HDMI input as shown on the Rear panel below . 2. With DVI output, connect the cable from the AUDIO OUT R of the HDTV set top box or DVD pla yer to th e INPU T[...]

20 First time use : Y -P B P R . 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the Rear panel below . 2. Connect the cable from the P B /C B OUT or B- Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (P B) jack. 3. Connect the cable from the P R /C R OUT or R[...]

21 F ir s t t im e u s e CONNECTING A VIDEO AND MONAURAL AUDIO SOURCE TO INPUT 1 ~ FRONT INPUT 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (V IDE O) jac k, as s how n o n t he Re ar Pa nel on th e right. 2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (MONO)/L(AUDIO[...]

22 The Remote Control In addition to controlling all the functions on your HIT ACHI Plasma TV , the new remote control is designed to ope rate different types of VCRs, cable bo xe s, se t- top -b ox es, s at el li te re ce iv er s, D VD pl ay er s, and other audio/video equipment with one touch. Basic operation keys are grouped together in one area[...]

23 The Remote Control How to Use the Remote to Contr ol Y our TV NOTE: For automatic DAY/NIGHT picture mode settings, see page 5 0 . POWER button Press this button to turn the TV set on or off when th e re mot e is in T V m od e. (S ee pa ge 2 2 fo r ins tr uc ti on s on how to set the remote control to TV mode). MODE Indicator Turns on or blinks t[...]

How to Use the Remote to Contr ol Y our TV 24 The Remote Control IMA G E INPUT IMA G E INPUT IMA G E INPUT IMA G E INPUT 1 2 16:9 ST ANDARD 2 Use this aspect mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 aspect ratio showing 100% of the size. ASPECT button Press this button to quickly change the picture format ASPE[...]

25 How to Use the Remote to Contr ol Y our TV The Remote Control NOTE: 1. Press the INFO button again or the EXIT button to return to normal viewing. 2. The Aspect setting will not be shown if the channel is locked. S-IN: 1 480i 3:17PM Auto DIGIT AL CHANNELS Digital Closed Caption This icon will appear only when receiving a Digital Broadcast with C[...]

26 How to Use the Remote to Contr ol Y our TV The Remote Control VOLUME (VOL), MUTE button Pre ss th e VOLU ME butt on ( 왖 o r 왔 ) un til y ou obt ain the desired sound level. To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc., press the MUT E butto n. Pr ess t he MU TE button ag ain t o turn the sound of[...]

27 The Remote Control FUNCTION FOR YOUR CABLE BOX. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of your cable box (refer to pages 32-33 for pre-codes). 1. Turn ON your cable box. 2 . To switch to Cable (CBL) pre-coded mode, use the SOURCE SELECT button on the remote [...]

28 The Remote Control YOUR SET-TOP-BOX/SATELLITE RECEIVER. This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the remote system of your set- top-box/satellite systems (refer to pages 32-33 for pre- codes). 1. Turn ON your set-top-box/satellite systems. 2. To switch to set-[...]

29 The Remote Control FUNCTION FOR YOUR DVD PLAYER. This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of your DVD player (refer to pages 32-33 for pre-codes). 1. Turn ON your DVD player. 2. To switch to DVD pre-coded mode, use the SOURCE SELECT button on the remote contro[...]

30 The Remote Control YOUR VCR/PVR (Personal Video Recorder). This remote is designed to operate different types of VCRs/PVRs. You must first program the remote to match the remote system of your VCR/PVR (refer to pages 32-33 for pre-codes). 1. Turn ON your VCR/PVR. 2. To switch to VCR/PVR pre-coded mode, use the SOUR CE S ELECT bu tton on the rem [...]

31 The Remote Control INPUT ACCESS This optional feature allows the user of the remote control to setu p it’s SOURCE SELECT button to acces s the specified input of the TV. Setup for this feature is applicable to the remote control’s normal mode only and only applies to the DVD, PVR /VCR and SAT/CBL modes. 1. Select the desired device mode (DVD[...]

The Remote Control 32 Remote Contr ol Codes Cable BRAND Codes General Instrument ........ 0869 Daewoo ......................... 0045 , 0278 , 0020, 0561 1479 A BC ........................ 0003, 0008, 0011 GOI................................. 0775, 1775 1278 Panasonic ..................... 1062, 0035, 0162, 0225, A mericast ................ 0899 Goo[...]

33 Remote Control Codes The Remote Control DBS/PVR Codes Enterprise 0591 Sony 0533,1533,0864,1033, Combo BRAND ESA 0821,1268 1431 Hughes Network Systems 0739 Fisher 0670,1919 Sova 1122 Philips 0739 Funai 0675,1268,1334 Sungale 1074 Samsung 0739 Gateway 1073,1077,1158 Superscan 0821 GE 0522,0815,0717 SVA 0860,1105 PVR BRAND Codes Go Video 0744,0715,[...]

34 On-Screen Display NOTE: The On Screen Display ( OSD ) for the different submenus shown in next pages are for illustration purposes only, therefore; doesn't reflect the actual apearance of the OSD of your HITACHI Plasma TV. 1. Press MENU on the remote control to display the 2. Use the (buttons 왖 , 왔 , 왗 a n d 왘 ) and highlight a diff[...]

35 Timers Channel Manager On-Scr een Display T reble Adjust the treble. Bass Adjust the bass. Balance Adjust the balance. Audio Source Select between three Audio Sources. Internal Speakers Select internal or external speakers. Auto Noise Cancel Eliminates the noise between stations. Perfect Volume Adjust volume in fixed setting Loudness Adjust Loud[...]

36 Video Select to adjust picture settings and improve pi ctur e q ual it y. Y ou can i nde pe nden tly cu st omiz e e ach o f the Video Inputs to your preference to increase viewing performance and pleasure depending upon the video program being viewed. If is selected, only the selected input will reset to initial conditions. Picture Mode Use this[...]

37 Video Color T emperature Set this to Hig h for cooler co lor with more b lue, set to Med ium for more na tural color, se t to Standard f or accurate color or set to Black/White for more reddish color. Black Enhancement Use this function to enhance the shadow detail in dark scenes using the settings off, low , middle and high. NOTE: 1. If CONTRAS[...]

2. Vertical Position setting returns to "0" automatically after TV power On/Off. 38 Reset Video Settings This function allows you to Reset the Video Menu Settings of the pr esent input and return it to the Day -Dynamic VIDEO mode. 1. Use 왖 , 왔 to highlight functions. 2. Press the button or 왘 to select Reset Video Settings. 3. Use th[...]

Audio Select to adjust the TV to your preference and to improve the sound quality . 1. Press 왖 or 왔 to select menu item. 2. Press 왗 or 왘 to adjust the function. 3. Press to quit the , or select to return to the main menu. NOTE: If TREBLE is selected you are adjusting treb le. Th e addi tion al menu items BASS and BALANCE can be selected and[...]

40 Audio Source Multi-Channel T elevision Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a weak stereo broadcast or SECOND AUDIO PROG (SAP) which may be a secondary language, weather report, etc. Internal Speakers This function is useful when setting up the external speakers. ON Select this fea[...]

On-Screen Display Channel Manager Select CHANNEL MANAGER to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel List. 1. Press 왖 , 왔 to highlight functions. 2. Press the button or 왘 to select. Signal Meter Se lect S IGN AL ME TER whe n u sing an in do or o r o utd oo r antenna. This feature will show the signal[...]

42 Channel List This function allows you to review which channels are labeled (ID) , which have been added to CHANNEL MEMORY (SCAN) , which are protected by LOCK and which are your F AVORITE (F A V) CHANNELS . 1. Use the CURSOR P AD to navigate the Channel List. 2. Press the SELECT button to select ON or OFF on the SCAN and LOCK columns. 3. T o sel[...]

Locks This f unctio n will block out t he pic ture a nd sou nd of th e selected channel or video input. The code to enter the Locks feature is a four digit access code number. The factory preset code is 0000 . Use the NUMBER buttons to enter the access code. 1. Use the CURSOR PAD 왖 , 왔 to highlight the desired function in the LOCKS menu. 2. Pre[...]

44 Movie Ratings Use Movie Ratings to prevent viewing of any movie that you feel may be inappropriate due to its content. 1. Use the CURSOR PAD 왖 , 왔 to select the MOVIE RATING category that you want to block. 2. Press SELECT to block the MOVIE RA TING that you have selected. Once rating is selected, for example PG-13, all movies rated PG-13 an[...]

Locks TV Ratings Use TV RATINGS to prevent the viewing of any TV program that you feel may be inappropriate due to its content. 1. Use the CURSOR PAD 왖 , 왔 to select the TV RATING category that you want to block. 2. Press SELECT to block the TV RAT ING that you have selected. 3. Press EXIT to quit the menu or select TV RA TING to return to the [...]

46 Canadian Ratings (Eng) Use CANADIAN RA TINGS (ENG) to block any type of movie and television program in Canada that you feel might be inappropriate in its content. 1. Us e t he C U RS O R PA D 왖 , 왔 t o s el e ct t he C ANADIAN RATINGS (ENG) category that you want to block. 2. Press SELECT to block the CANADIAN RA TINGS (ENG) that you have s[...]

47 Locks Canadian Ratings (Fr n) Use CANADIAN RATINGS (FRN) to block Canadian French programs according to various program ratings that you feel might be inappropriate in its content. 1. Use the CURSOR PAD 왖 , 왔 to select the CANADIAN RATINGS (FRN) category that you want to block. 2. Press SELECT to block the CANADIAN RA TINGS (FRN) that you ha[...]

Program Title. . . . . . . . Cable 888-001 11:30AM 11:55AM REGION 5 KDEF-DT Multi DTVCC CF-18 ans+ 1080i 10:35 AM o t u A Pr o gram Title Program Time Source CH ID/Input ID Current Time Receiving Signal Format Receiving Digital Closed Caption Receiving Audio Language (Digital CH) /Receiving N TSC (Analo g CH ) Closed Caption Mode Receiving Rating B[...]

Select TIMERS to set your Clock, Sleep Timer, Event Timer and Day/Night Timer. 1. Use the CURSOR buttons 왖 or 왔 to highlight the function to be adjusted. 2. Press the SELECT button to select. Set The Clock The Clock must be adjusted before you can use the SET EVENT TIMER or DA Y/NIGHT TIMER feature. 1. Use the CURSOR PAD 왗 , 왘 , 왖 , 왔 t[...]

50 Timers Set Sleep Timer Select this feature to set your SLEEP TIMER from 30 minutes to 3 hours (30 minute increments). 1. Press the CURSOR P AD 왘 repeatedly to set your Timer from and Set Day/Night Timer S elect this feature to activate and set your TV’s DA Y/NIGHT PICTURE MODE automatically . This feature is not available until the clock is [...]

51 Timers Set Event Timer This function will automatically operate the Plasma TV viewing reservation of a program. If the clock is not set, you can not use this function and the screen at right wi ll appear. The message on the screen will disappear after 3 seconds, then the screen automatically goes to the clock setup mode (see page 49). 1. Use the[...]

52 Setup Select SETUP when setting your TV up for the first time. 2. Press the SELECT button to select. S et The Menu Options Setup the Language and background of the Menu OSD. Set The Language This feature will allow you to select any one of three differ ent languages for all on-screen displays. 1. Use the CURSOR PAD 왗 or 왘 to select the langu[...]

53 Set The Menu Background This function allows you to choose from two menu backgrounds. SET THE MENU BACKGROUND (SHADED OR SOLID) of your choice. Use the CURSOR PAD 왗 or 왘 to select shaded or solid. 2 . Select SOLID for a black background (no picture can be seen behind menu screen), select SHADED and a light background is visible. 3. Press EXI[...]

54 Setup Set The Inputs Use this feature to give a name to any of the video inputs. 1. Press the CURSOR P AD 왖 , 왔 to highlight the video inputs. 2. Press the CURSOR PAD 왗 , 왘 to select your choices. INPUT 3 Auto Link Use th is fun cti on to aut oma tic all y t urn th e T V o n a nd tun e to INPUT 3 when it detects a video signal to INPUT 3[...]

55 Setup Set The Cl osed Caption s Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as or . 1. Us e the CURS OR PAD 왗 , 왘 , 왖 and 왔 to highl ight and select the function to change. 2. Press EXIT to [...]

56 Setup Se lect The Quick Start Option This feature will select QUICK START UP options. Set this feature to ON to have the TV tune channels (both Analog and Digi tal) quickly wh en first turnin g the TV on. Set this feat ure to OFF to save electri city. Select ing ON for the QUICK START UP feature will activate the TV tuners circuits when the TV i[...]

57 On-Screen Display Power Swivel This feature controls the motorized stand. It allows the customer to turn the Plasma Television left or right using the remote control. This feature is only available when the Table Top Stand is connected (see page 6). 1. Use the CURSOR P AD 왗 or 왘 to unlock or lock the Power Swivel. Exit the OSD menu system be[...]

58 Equipment Care and T r oubleshooting TROUBLESHOOTING Your HITACHI Plasma Television incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR TO HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1. Press the[...]

59 Useful Information Reception Problems IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. GHOSTS: Ghosts are caused by the television signal following two paths. One is the direc[...]

Useful Information 60 Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses an[...]

61 Useful Information All specifications, weights, and dimensions are subject to change without prior notice. Please access www.hitachi. us /tv for detailed specifications and dimensions for custom installations. UltraVision Digital is a registered trademark of Hitachi Home Electronics (America), Inc. • • Power Requirements . . . . . . 108-132V[...]

62 Useful Information Rear View, Use as Reference for Wall Mount Bracket Set Dimensions Units Inches 48-13/16 2- 9/16 2- 9/16 34-11/16 32- 5/16 20- 3/16 19-15/16 17- 9/16 43- 9/16 24-11/16 5- 1/16 3-10/16 1- 7/16 16-10/16 12 24-13/16 12 11-12/16 12- 2/16 8-7/16 mm 1240.00 65.00 65.00 880.90 820.50 513.40 505.90 445.50 1105.92 626.40 128.50 92.50 36[...]

63 Useful Information HOME ELECTRONICS DIVISION HIT ACHI has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of HITACHI Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide you with convenient and expedient assis[...]

64 Useful Information    Look on the right side of the TV. Locate the LABEL where it shows the information related to MODEL NAME and SERIAL #. HITACHI Service Department will require this information in order to give y ou the proper support regarding your questions. When you call HITACHI SERVICE HOTLINE they will require some information r[...]

End User License Agr eement for HIT ACHI DTV Software END USER LICENSE AGREEMENT FOR HIT ACHI DTV SOFTW ARE IMPORTANT – READ CAR EFULLY: This End Us er License Agreement for HIT ACHI DTV Software (this “Agreement”) is a legal agreement between you (“you ” or “ your”), in your capacity as th e owner of a HITACHI brand digital televisio[...]

130 L ic en s e Ag re e me nt s OPERATING SYSTEM LICENSE INFORMATION This HITACHI TV incorporates certain open source operating system software distributed under the GNU GENERAL PUBLIC LICENSE Version 2 and GNU LESSER GENERAL PUBLIC LICENSE Version 2.1 as defined by the Free Software Foundation, Inc. The operating system software incorporated in th[...]

The licenses for most software are designed to take away your f reedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's so[...]

132 In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. Y ou may copy and distribute the Program (or a work based on it, under Section 2) in object code or execut[...]

133 TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND F ITNESS FOR A P ARTICULAR PURPOSE. THE ENTIRE RISK AS T O THE QUALITY AND PERFORMAN CE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REP AIR OR CORRECTION. 1 2 . I N N O E V E N T U NL E S S R E Q U I R E D B Y A P P L I C A B L[...]

134 Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specia[...]

135 straightforwardly into another language. (Hereinaft er , translation LVLQFOXGHGZLWKRXWOLPLWDWLRQLQWKHWHUPPRGL¿FDWLRQ "Source code" for a work means the preferred form of the work for making PRGL¿FDWLRQV to it. For a library , complete source code means all the source code for all modules it contains,[...]

136 a work containing portions of the Library , and distribute that work under terms of your choice, provided that the terms permit PRGL¿FD tion of the work for the customer's own use and reverse HQJLQHHULQJIRUGHEXJJLQJVXFKPRGL¿FDWLRQV Y ou must give prominent notice with each copy of the work that the Library is used in it an[...]

137 or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may diffe[...]

Appendixes 138 Appendix A: Picture Format for Each Input Source Aspect Specifications Yes : Selectable 웎 : Un-selectable Input Auto Aspect Aspect Signal Aspect Video ID 16:9 Standard 1 16:9 Standard 2 16:9 Zoom 4:3 Standard 4:3 Expanded 4:3 Zoom 1 4:3 Zoom 2 ANT Analog Video NTSC 웎 4x3 Yes 웎 Yes Yes Yes Yes Yes ANT YC B C R 480p 웎 16x9 Yes [...]

Appendixes 139 (Continuation) I nput A uto A s pec t A s pe c t S igna l A s pec t V ide o ID 1 6 : 9 Standard 1 16:9 Standard 2 16:9 Zoom 4:3 Standard 4:3 Ex panded 4:3 Zoom 1 4:3 Zoom 2 HDMI 1 H D MI (DVI) 1080p/ 1080i/720p 웎 1 6x 9 Ye s Y e s Y e s 웎 Y e s 웎 웎 (Input1 480p Auto ON 16x 9 Y e s Initial 웎 Ye s 웎 웎 웎 웎 -DVI) 480i L[...]

140 Index A Accessories, . . . . . . . . . . . . . . . . . . . . . . . . . .4 Antennas (Connecting), . . . . . . . . . . . . . . . . .8 Aspect Ratio . . . . . . . . . . . . . . . . . . . . .24, 38 Audio Bass Boost . . . . . . . . . . . . . . . . . . . . . . . . 39 Audio Settings . . . . . . . . . . . . . . . . . . . . . . . 39 Audio Source . . . . [...]

Notes[...]

Notes[...]