Honda CTX1300 (2014) инструкция обслуживания

This manual should be considered a permanent part of the motorcycle and should remain with the motorcycle when it is resold . This publication includ es the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without i ncurring any obligation. No part of th[...]

Welcome Congratulations on your purc hase of a new Honda motorcycle. Your selection of a Honda makes you part of a worldwide family of satisfied customers who appreciate Honda’s reputation for building qual ity into every product. To ensure your safety and riding pleasure: ● Read this owner’s manual carefully. ● Follow all recommendations a[...]

A Few Words About Safety Your safety, and the safety of others, is very important. Operating this motorcycle safely is an important responsibili ty. To help you make informed decisions about safety, we have provided operating procedures and o ther information on safety labels and in this manual. This information alerts you to potentia l hazards tha[...]

Contents Motorcycle Safety P. 2 Operation Guide P. 18 Maintenance P. 70 Troubleshooting P. 114 Information P. 144 Specifications P. 158 Index P. 161 14 CTX1300-32MJN6000 .book 4 ページ ２０１３年１２月１１日 　水曜日　午後２時５ １分[...]

Motorcycle Safety This sectio n contains impo rtant informati o n for safe riding of your motorcycle. Please read this section to ensu re rider and passenger safety. Safety Guidelines ......................................... P. 3 Image Labels ................................................. P. 6 Safety Precautions ................................[...]

Safety Guidelines 3 continued Motorcycle Saf ety Safety Guidelines Follow these guid elines to ensure your safety: ● Perform all routine a nd regular inspections specifie d in this manual. ● Stop the engine and keep sparks and flame away before filling the fuel tank. ● Do not run the engine in enclosed or partl y enclosed areas. Carbon monoxi[...]

Safety Guidelines 4 Motorcycle Saf ety Make yourself more visible, especially at night, by wearing bright reflective clot hing, positioning yourself so other drivers can see you, signaling before turning o r changing lanes, and using your horn when necessary. Never ride beyond y our personal abilities or faster than conditions warrant. Fatigue and [...]

Safety Guidelines 5 Motorcycle Saf ety check the tightness of critical nu ts and bolts, and check the h andlebar, control le vers, brakes, and wheels. Ride slowly and c autiously. Your motorcycle may have suffe red damage that is not immediately app arent. Have your motorcycle thoroughl y checked at a qualified service facility as soon as possible.[...]

Image Labels 6 Motorcycle Saf ety Image Labels The following pages descri be the label meanings. Some labels warn you of potential hazards that co uld cause serious injury. Others provide important safety information. Read this information carefully and don’t remove the labels. If a label comes off or becomes hard to read, contact your dealer for[...]

Image Labels 7 continued Motorcycle Saf ety BATTERY LABEL DANGER • Keep flame and spark away from the battery. Battery produce explosive gas that can cause explosion. • Wear the eye protectio n and rubber gloves when handling the battery, o r you can get burned or lose your eyesight b y the battery electroly te. • Do not allow chi ldren and o[...]

Image Labels 8 Motorcycle Saf ety RADIATOR CAP LABEL DANGER NEVER OPEN WHEN HOT. Hot coolant will scald you. Relief pressure valve begins to open at 1.1 kgf/cm 2 . ACCESSORIES AND LOADING WARNI NG LABEL WARNING ACCESSORIES AND LOADING • The safety stability and handling of this motorcycle may be affected by the addition of accessories and luggage[...]

Image Labels 9 continued Motorcycle Saf ety SADDLEBAG LABEL Heavy cargo placed on the open lid can dama ge the saddlebag and lid. TYRE INFORMATION LABE L Cold tyre pressure: [Driver only] Front 250 kPa (2.50 kgf/cm 2 , 36 psi) Rear 290 kPa (2.90 kgf/cm 2 , 42 psi) [Driver and passenger] Front 250 kPa (2.50 kgf/cm 2 , 36 psi) Rear 290 kPa (2.90 kgf/[...]

Image Labels 10 Motorcycle Saf ety SAFETY REMINDER LABEL For your protection, always w ear helmet, protective apparel. FUEL LABEL Unleaded petrol only CARGO LIMIT LA BEL Do not exceed 9.0 kg (20.0 lb) CARGO LIMIT LA BEL Do not exceed 0.5 kg (1.0 lb) 14 CTX1300-32MJN6000 .book 10 ページ ２０１３年１２月１１ 日　水曜日　午後２?[...]

Safety Precautions 11 Motorcycle Saf ety Safety Precautions ● Ride cautiously and keep your hands on the handlebar and feet on the footpegs. ● Keep passenger’s hands on to the grab rails or your waist, passenger’s feet on the footpegs while riding. ● Always consider the safety of your passenger, as well as other drivers and riders. Make s[...]

Riding Precautions 12 Motorcycle Saf ety Riding Precautions During the first 5 00 km (300 miles) of running, follow these guidelines to ensure your motorcycle’s future reli ability and performance. ● Avoid full-throttle starts and rapid acceleration. ● Avoid hard braking and rapid down-shifts. ● Ride conservatively. Observe the following gu[...]

Riding Precautions 13 continued Motorcycle Saf ety ❙ Combined ABS Your motorcycle is e quipped with a brake system that distribu tes the braking force between the front and rear brakes. The distribution of the braking force appli ed to the front and rear brakes when operating the lever only and when operating the pedal onl y is different. For ful[...]

Riding Precautions 14 Motorcycle Saf ety ● Park on a firm, level paved surface. ● If you must park on a slight incline or loose surface, park so that the motorcycle cannot move or fall over. ● Make sure that high-temperature parts cannot come into contact with flammable materials. ● Do not touch the engine, muffler, brakes and other high-te[...]

Riding Precautions 15 Motorcycle Saf ety Follow these guid elines to protect the en gine and catalytic converters: ● Use only unleaded petrol. ● Use recommended octane number. Using lower octane petrol will re sult in decreased engine performance. ● Do not use fuels containing a high concentration of alcohol. 2 P. 149 ● Do not use stal e or[...]

Accessories & Modifications 16 Motorcycle Saf ety Accessories & Modifications We strongly advise that you do not add any accessories that were not specifically designed for your motorcycle by Honda or make modifications to your motorcycle from its original design. Doing so can make it unsafe. Modifying your motorcycle may also void your war[...]

Loading 17 Motorcycle Saf ety Loading ● Carrying extra weight affects your motorcycle’s handling, braking and stability. Always ride at a safe speed for the load you are carrying. ● Avoid carrying an excessive load and keep within specified load li mits. 2 Maximum weight capacity / Maximum luggage weight P. 158 ● Tie all luggage securely, e[...]

18 Operatio n Guide Operation Guide Parts Location Right saddlebag (P68) (P90) Accessory so cket (P69 ) Throttle grip (P110 ) Front brake lever (P111 ) Rear brake fluid reservoir (P104) Spark plugs (P96) Right over head cover (P88) Engine oil fi ll cap (P99) Engine oil leve l inspecti on window (P98) Brakelight switch (P106) Rear brake pedal Right [...]

19 Operatio n Guide Clutch fluid res ervoir (P107) Clutch lever Left inner panel (P87) Left middle cowl (P93 ) Left shroud (P92 ) Battery (P95) Main fuse A (P143) Spark plugs (P96) Shift lever (P62 ) Left over head cover (P88) Engine oil drain bolt (P100) Coolant reserve tank (P102) Side stand (P108) Engine oil fi lter (P 101 ) Fuse box (P141 ) Mai[...]

20 Operatio n Guide Instruments Display Check When the ignition switch is turned on, the opening symbol wil l show on the i-multi- information display. If the display does not show when it should, have your dealer check for problems. Speedom eter 5 (up) button SELECT 6 (down) button SELECT button SET Tachometer red zone (excessive engine rpm range)[...]

21 continued Operatio n Guide Coolant temper ature gauge ( ) When the coolant is over specifie d temperature, th e 6th (H) segment flashes and high coolan t temperature indicator lights . (P36) If the 6th (H) segment flashes while riding: (P116 ) If the coolant temperature gauge flashes sequentially or turns off: (P120) i-Multi-Information Display [...]

22 Instruments (Continued) Operatio n Guide Current f uel milea ge [INST. FUEL] & Av erage fu el mileag e [AVG.FUEL] & Average speed [AVG.SPEED] & Trip time [TRIP TIME] & Audio information u To reset the average fuel mileage: (P27) Current fuel mileage Average fuel mileage Average speed Trip time Audio information Press the 5 (up) b[...]

23 continued Operatio n Guide ❙ Current fuel mileage The current fuel mileage shows the cu rrent or instant fuel mileage you are getting. Display range: 0.0 to 99.9 km/l (l/100km, mile/l or mile/gal) • When your speed is less than 7 km /h (5 mph): “--.-“ is displayed • Above 99.9 km/l (mile/l or mile/gal): “99.9“ is display ed • Abo[...]

24 Instruments (Continued) Operatio n Guide ❙ Average speed Shows average speed since the engine was started. Display range: 0 to 210 km/h (0 to 130 mph) • Initial display: “---“ is disp layed When “---” is displayed while riding , go to your d ealer for service. ❙ Trip time Shows operating time since the engine was started. Display r[...]

25 continued Operatio n Guide ❙ Odometer Total distance ridden. Wh en “------” is displayed, go to your dealer for service. ❙ Tripmeter A/B Distance ridden since the tripmeter was reset. When “---.-” or “----.-” is displayed, go to your dealer for service. u To reset the tripmeter: (P27 ) ❙ Air temperature gauge Shows ambient temp[...]

26 Instruments (Continued) Operatio n Guide ❙ Available driving distance (only reserve fuel mode) When the 1st (E) segment of the fu el gauge flashes, the estimated available driving distance is indicated. Display range: 99 to 0 km (mile) • Above 99 km (mile): “99“ is displayed The indicated availabl e driving dist ance is calculated based [...]

27 continued Operatio n Guide ❙ Status Icons The information about current ly used audio system and handle grip heater system is displayed on the upper part of i-multi-info rmation display by icons. u Information of the audio system: (P4 4 ) u Information of the handle grip heater system: (P42) ❙ To reset the t ripmeter an d av erage fuel milea[...]

28 Instruments (Continued) Operatio n Guide Setting Mode You can set up the following items: • Backlight brightness setting [BRIGHTNESS] • HISS Indicator setti ng [HISS] • Clock setting [CLOCK ] • Each meter unit setting [UNIT] • Reset to factory default setting [DEFAULT ALL] To shift to the setting mode, press and hold the button and the[...]

29 Operatio n Guide continued ❙ Backlight brightness setting You can adjust the brightness to one of five levels. ! a Select “BRIGHTNESS“ menu on the main menu screen, and then the display moves to the menu screen of “BRIGHTNESS“. (P28) ! b Select the brightness level using the buttons. SELECT Dim Bright ! c Press the button. The brightne[...]

30 Instruments (Continued) Operatio n Guide ❙ HISS Indicator setting You can select on or off for blinking of the HISS indicator. ! a Select “HISS“ menu on the main menu screen, and then the display moves to the menu screen of “HISS“. (P28) ! b Select “ON“ (blinks) or “OFF“ (off) using the buttons. ! c Press the button. The HISS I[...]

31 Operatio n Guide continued ❙ Clock setting ! a Select “CLOCK“ menu on the main menu screen, and then the display moves to the menu screen of “CLOCK“. (P28) ! b Press the button until the desired hour is displayed. u Press and hold to move the hour fast. ! c Press the button. The cursor moves to the minute digits. SELECT SET ! d Press t[...]

32 Instruments (Continued) Operatio n Guide ❙ Each meter unit setting You can change the fuel mileage meter unit. The unit of the current fuel mileage and average fuel mileage is changed by “FU EL“ menu. You can ch ange the sp eed and mileage unit and fuel mileage meter unit. The unit of the odometer, tripm eter A/B, current fuel mileag e and[...]

33 Operatio n Guide continued To change the speed and mileage unit ! a Select “DIST“ on the menu screen of “UNIT“, and then the cu rsor moves to “mile“ or “km“. ! b Press the button to select either “mile” or “km”. ! c Press the button. The cursor returns to “DIST“. E type only SELECT SET When selecting “mile” • Un[...]

34 Instruments (Continued) Operatio n Guide To change the fuel mileage meter unit ! a Select “FUEL“ on the menu screen of “UNIT“, and then the cursor moves to “l/100km“, “km/l “, “mile/gal“ or “mile/ l“. ! b Press the button to select either “l/100km“ or “km/l“. Press the button to select either “mile/gal“ or “[...]

35 Operatio n Guide ❙ Reset to factory default setting The set value can be returned to initial setting. ! a Select “DEFAULT ALL“ menu on the main menu screen, and then the display moves to the menu screen of “DEFAULT ALL“. (P28) ! b Press the button to select either “NO“ (not reset) or “YES“ (reset). SELECT ! c Press the button, [...]

36 Operatio n Guide Indicators High beam indi cator Neutral indicator Comes on when the transmission is in Neutra l. High coolant temperature indicator Comes on briefly when the ignition switch is turned on. If it comes on while riding: (P116) ABS (Anti-lock Brake Sys tem) indicator Comes on when the ignition switch is turned on. Goes off when your[...]

37 Operatio n Guide Right turn si gnal indicator Left turn signal indicator Low fuel indicator • Comes on briefly when the ignition switch is turned on. • Comes on when there is only reserve fuel left in the fuel tank. Remaining fuel when low fuel indicator comes on: 3.4 litres (0.9 US gal, 0.7 Imp gal) TCS (Traction Control System) indicator ?[...]

38 Operatio n Guide Switches Handle grip heater switch (P42) Headlight dimmer switch • : High beam • : Low beam Passing light contro l switch Flashes the high beam head light. Turn signal switch • The turn signal will automatically stop when you complete the turn. • When used for a lane change, the turn s ignal is automatically stopp ed in [...]

39 continued Operatio n Guide Engine stop switch Should normally remain in the (Run) position. u In an emergency, switch to the (Off) position to stop the engin e. Hazard switch Switchable when the ignition switch is ON. Ca n be turned to off regardless of the ignition switch position. u The signals continue flashing with the igni tion sw itch in O[...]

40 Switches (Continued) Operatio n Guide button SELECT power button AUDIO TCS (Traction Con tro l System) off switch Press and hold to tu rn the TCS on and off. u The TCS off indicator comes on when TCS is turned off. button MODE button MUTE button VOLUME button TRACK These buttons used to operate the audio system. (P48 ) button SET These buttons u[...]

41 Operatio n Guide Steering Lock Lock the steering when pa rking to help prevent theft. A U-shaped wheel lock or similar device is also recommended. ❙ Locking ! a Turn the handlebar al l the way to the left. ! b Push the key down, and turn the ignition switch to the LOCK position. u Jiggle the handlebar if the lock is difficult to engage. ! c Re[...]

42 Operatio n Guide Handle Grip Heater CTX1300A is equipped with a handle grip heater that warms up your hands durin g ride. Wear gloves to protect your hands from the heated grips. Handle grip heater indicator: Displayed when handle grip heater is on. The selected heater level is indicated by the number of times the in dicator blinks when the heat[...]

43 Operatio n Guide ❙ To operate handle grip heater ! a Start the engine. (P61) ! b Press the handle grip heater switch. The handle grip heater i s on. ! c Select the heater level by pressing the switch. u Do not leav e the handle grip heater in the high position for a long time on a warm day. ! d To turn off, press the switch until “OFF” is [...]

44 Operatio n Guide Audio System This audio system can play audio files on Bluetooth r audio devices (mobile phones, digital audio players or equivalents), USB digital audio players and USB flash driv es. The audio system can pair with Bluetooth r sound devices (speakers, headsets, communication device s or equivalents). USB digital audio player Bl[...]

45 Operatio n Guide continued • Only operate audio buttons when safe to do so. • Set the volume at a level that still allows horns and emergency vehicles to be heard. • The audio system can play tracks and perform track selection. Album selection, play mode (Repeat, s huffle, etc.) change and other operations cannot be performed on the audio [...]

46 Audio System (Continued) Operatio n Guide Bluetooth r Wireless Technology The Bluetooth r word mark and logos are registered trademarks owned b y Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co ., Ltd., is under license. Other trademarks and trade names a re those of their respective owners. Playable Devices ❙ Bluetooth r Dev[...]

47 Operatio n Guide continued ❙ Audio Files on USB Fl ash Drives MP3 Standard MPEG1 Audio Layer 3 File ex tension .mp3 Sampling periodici ty (kHz) 32/44.1/48 Bit rates (kbps) 32/40/48/56/64/80/96/112/128/ 160/ 192/224/256/320/VBR Available tags ID3v2 (v2.2/v2.3/v2.4) ID3v1 (v1.0/v1.1) WMA Standard Windows Media Audio Version 7/8/9 File ex tension[...]

48 Audio System (Continued) Operatio n Guide Audio System Location Speakers button Changes tracks. TRACK button Adjusts the vo lume. This button is also used to pair the Bluetooth r devices. (P51) VOLUME button Mutes the audio. This button also is used to select the SVC mode. (P60) MUTE button Selects the audio mode. This button is also used to pai[...]

49 Operatio n Guide continued i-Multi-Information Display Bluetooth r devi ce status icon: The connection status of Bluetooth r devices is displayed. Bluetooth r device status i con USB device stat us icon Playing status icon Audio device status icon Audio play time Sound device status icon Artist name Track title Volume level USB device status ico[...]

50 Audio System (Continued) Operatio n Guide Changing the Audi o Mode You can select four audio modes by pressing the button. The selected mode is displayed by audio device and sound device st atus icons. Select an audio mode, th e status icon will blink. The status i con will stop bli nking when the information from the audio device is received. M[...]

51 Operatio n Guide continued Bluetooth r Audio Device ❙ To pair a Bluetooth r audio device ! a Select the audio mod e 1 or 3 usi ng the button. (P50) u The beep signal cannot be heard when the mode 2 or 4 is chosen. ! b Press and hold the and 6 (down) buttons. The Bluetooth r device status icon ( Bluetooth r mark and left arrow) starts blinking [...]

52 Audio System (Continued) Operatio n Guide ❙ To pair a Bluetooth r soun d device ! a Select the audio mode 1 or 3 using the button. (P50) u The beep signal cannot be he ard when the mode 2 or 4 is chosen. ! b Press and hold the and 5 (up) buttons. The Bluetooth r device status icon ( Bluetooth r mark and right arrow) starts blinking and the sho[...]

53 Operatio n Guide continued ❙ To play a track ! a Make sure that yo ur audio device i s on and connected to the au dio system. u Th e Bluetooth r device status icon ( Bluetooth r mark and left arrow) is displayed when an audio device i s connected. ! b Select the audio mod e 1 or 2 usi ng the button. (P50) A track will be played and the pl ayin[...]

54 Audio System (Continued) Operatio n Guide ❙ To reset registered Bluetoot h r devices ! a Select the audio mode 1 or 3 using the button. (P50) u The beep signal cannot be he ard when the mode 2 or 4 is chosen. ! b Press and hold the buttons for 10 seconds. The long beep (1 second) will sound and the registered informations will be deleted. u If[...]

55 Operatio n Guide continued USB Digital Audio Player ❙ To connect a USB device ! a Open the right fairing pock et. (P67) ! b Release the USB connector from the holder. ! c Connect the USB device to the USB connector. The USB device status icon will be displayed wh en the audi o system recognizes a USB device. • Do not leave USB devices in the[...]

56 Audio System (Continued) Operatio n Guide ❙ To play a track on a USB digital audio player ! a Make sure that your digital audio player is on and connecte d to the audio system. u The USB device status icon is displayed when a digital a udio player is co nnected. ! b Select the audio mode 3 or 4 using the button. (P50) A track will be played an[...]

57 Operatio n Guide continued USB Flash Drive • Use a recommended USB flash drive of 256 MB or higher. • Some USB flash drives (such as devices with security lockout features, etc.) may not be used or restricted to its function. • The audio system can play MP3/WMA/ AAC/WAV files on a USB flash drive. • Audio files protected by digital right[...]

58 Audio System (Continued) Operatio n Guide ❙ To pair a Bluetooth r soun d device (P52) ❙ To stop the track Press the power button. The audio system turns off an d the track stops. ❙ To change a track on the USB flas h drive Press the 5 (up) button to skip to the next track. Press the 6 (down) button to go back to the beginning of the curren[...]

59 Operatio n Guide continued Muting The audio system has two mute functions: the manual mute func tion and automatic mute function by vehicle speed. ❙ To mute by manual operation To mute the audio volume, press the button. The sound device status icon is changed. To restore the original volume, pr ess the button ag ain. The sound devic e status [...]

60 Audio System (Continued) Operatio n Guide Speed-sensiti ve Volume Compensa tion (SV C) The SVC has four volume modes: OFF, LO, MID, and HI. SVC adjusts the volume level based on the vehicle speed. The faster you go, the audio volu me increases. As you slow down, the audio volume decr eases. If you feel the sound is too loud, choose LO, and vice [...]

61 Operatio n Guide Starting the Engine Start your engine using the following procedure, regardless of whether the engine is cold or warm. ! a Make sure the engine stop switch is in the (Run) posit ion. ! b Turn the ignition switch to the ON position. ! c Shift the transmission to Neutral ( indicator comes on). Al ternatively, pull in the clutch le[...]

62 Operatio n Guide Shifting Gears Your motorcycle transmission has 5 forward gears in a one-down, four-up shift pattern. If you put the motorcycle in gear with the side stand down, the engine will shut off. 1 N 2 3 4 5 14 CTX1300-32MJN6000 .book 62 ページ ２０１３年１２月１１ 日　水曜日　午後２時５ １分[...]

63 continued Operatio n Guide Refuelling Fuel type: Unleaded petrol only Fuel octane numbe r: Your motorcycle is designed to use Research Octane Number (RON) 91 or higher Tank capacity: 19 litres (5.0 US gal, 4.2 Imp gal) ❙ Refuelling and Fu el Guidelines (P15) Opening the Fuel Fill Cap ! a Insert the ignition ke y into the lock, and tu rn it cou[...]

64 Refuelling (Continued) Operatio n Guide Closing the Fuel Fill Cap ! a Install and tighten the fu el fill cap firmly by turning it clock wise until it clic ks. ! b Close the fuel tank lid and remove the key. 3 WARNING Petrol is highly fl ammable and explosive. You ca n be burned or seriously injured wh en handling fuel. • Stop the en gine, and [...]

65 continued Operatio n Guide Storage Equipment Helmet holder The helmet holder is located under the seat . A helmet set wire is in the tool kit. (P67) u Use the helmet holder only when parked. ❙ Removing the Seat (P86) Helmet hold er Helmet set wire Helmet holder Helmet set wire 3 WARNING Riding with a helmet attached to the holder can interfere[...]

66 Storage Equipment (Continued) Operatio n Guide U-shaped Lock To store a U-shaped lock under the seat. u The U-shaped lock is held in place above th e rear fender with the rubber strap. u Some U-shaped locks may not fit in the compartment due to th eir size or design. ❙ Removing the Seat (P86) Rubber strap U-shaped lock 14 CTX1300-32MJN6000 .bo[...]

67 Operatio n Guide continued Tool Kit/Document Bag The tool kit is located in the tool box (in the left saddleb ag) with the rubber str ap. The document ba g is located in the left saddlebag with the hook and loop fastener. ❙ Opening t he Saddle bag (P68) Tool kit Tool box Rubber strap Document bag Fairing Pocket Never exceed the maximum weight [...]

68 Storage Equipment (Continued) Operatio n Guide Saddlebag Never exceed the maximum weight capacity. Maximum weight: 9. 0 kg (20.0 lb) Opening th e Saddlebag The right and left saddlebags can be opened in the same manner. ! a Insert the ignition key, and turn it clockwise. ! b Pull the lever upwards. ! c Slide the lever to the outside and release [...]

69 Operatio n Guide Accessory Socket The accessory socket is located under the seat. Open the cover to access to the accessory socket. Rated capacity is 24W (12V, 2A) . Accessory socket Cover u To prevent the battery from becoming weak (or dead), keep the engine running whi le drawing current from the socket. u Set the headlight on low beam while t[...]

Maintenance Please read “Importance of Maintenanc e” and “Maintenance Fundamentals” carefully before attempting any maintenanc e. Refer to “Specifica tions” for service data. Importance of Maintenance ...................... P. 71 Maintenance Schedule ............................... P. 72 Maintenance Fundamen tals ...................... [...]

71 Maintenance Importance of Maintenance Keeping your motorcycl e well-maintained is absolutely essential to your safety and to protect yo ur investmen t, obtain ma ximum performance, avoid breakdowns, and reduce air pollution. Maintenance is the owner’ s responsibili ty. Be su re to inspect your motorcycle before each ride, and perform the perio[...]

72 Maintenance Maintenance Schedule The maintenance schedule specifies the maintenance requirements necessary to ensure safe, dependable performan ce, and proper emission control. Maintenance work should be performed in accordance with Honda’s standards and specifications by pr operly trained and equipped technicians. Your dealer meets all of the[...]

Maintenance Schedule 73 continued Maintenance Maintenance Level : Intermediate. We recommend service by your dealer, unless you have the necessary tools and are mechanically sk illed. Procedures are provided in an officia l Honda Shop Manual. : Technical. In the interest of safety, have your motorcycle serviced by your dealer. Maintenance Legend : [...]

Maintenance Sche dule 74 Maintenance Notes: *1 : At higher odometer readings, repeat at the frequency interval established here . *2 : Service more frequently when ri ding in unusually wet or dusty areas. *3 : Replacement requires mechanical skill. Items Pre-rid e Check 2 P. 75 Odometer Reading* 1 Annual Check Regular Replac e Refer to page × 1,00[...]

75 Maintenance Maintenance Fundamentals To ensure safety, it is your responsibility to perform a pre-ride inspection and make sure that any problem you find is corrected. A pre- ride inspection is a must, not only for safety, but because having a breakdown, or even a flat tyre, can be a major inconvenience. Check the following items before you get [...]

Maintenance Fu ndamentals 76 Maintenance Always use Honda Genuin e Parts or their equivalents to en sure reliability and safety. When orde ring colour ed componen ts, specify the model name, colour, and code mention ed on the colour label. The colour label is attached to the frame under the seat. 2 P. 86 Replacing Parts 3 WARNING Installing non-Hon[...]

Maintenance Fundamen tals 77 continued Maintenance Your motorcycle has a maintenance-free type battery. You do not have to check the battery electrolyte level or add distilled water. Clean the battery terminals if th ey become dirty or corroded. Do not remove the battery cap seals. There is n o need to remove the cap when charging. This symbol on t[...]

Maintenance Fu ndamentals 78 Maintenance 3. If the terminals are heavily corroded, clean and polish the terminals with a wire brush or sandpaper. Wear safe ty glasses. 4. After cleaning, reinstall the battery. The battery has a limited life span. Co nsult your dealer about when you should replace the battery. Always replac e the battery with anothe[...]

Maintenance Fundamen tals 79 Maintenance If a fuse fails rep eatedly, you likely hav e an electrical fault. Have yo ur motorcycle inspected by your dea ler. Engine oil consumption varies and oil quality deteriorates according to riding condi tions and time elapsed. Check the engine oil level regularly, and add the recommended engine oil if necessar[...]

Maintenance Fu ndamentals 80 Maintenance Do not add or replace brake fluid, except in an emergency. Use only fresh brake fluid from a sealed container. If you do add flui d, have the brake and clutch system serviced by your dealer as soon as possible. Pro Honda HP co olant is a pr e-mixed solution of antifreeze and di stilled water. A concentration[...]

Maintenance Fundamen tals 81 continued Maintenance ❙ Checking the Air Pressure Visually inspect your tyres and use an air pressure gauge to measure the air pressure at least once a month or any time you think the tyres look low. Always check air pressure when your tyres are cold. ❙ Inspecting for Dam age Inspect the tyres for cuts, slits, or cr[...]

Maintenance Fu ndamentals 82 Maintenance ❙ Inspecting Tread Depth Inspect the tread wear indicators. If they become visible, repla ce the tyres immediately. For safe riding, you sh ould replace the tyres when the minimum tread depth is reached. German law prohibits use of tyres whose tread depth is less than 1.6 mm. Wear indi cator location mark [...]

Maintenance Fundamen tals 83 Maintenance Have your tyres replaced by y our dealer. For recommended tyres, air pressure an d minimum tread depth, see “Specifications. ” 2 P. 159 Follow these guid elines whenever you rep lace tyres. ● Use the recommended tyre s or equivalents of the same size, constr uction, speed rating, and load range. ● Ha[...]

Maintenance Fu ndamentals 84 Maintenance This motorcycle is equipped with a viscous type air cleaner element. Air blow cleani ng or any other clean ing can degrade the viscous element performance and cause the intake of dust. Do not perform the maintenance. Should be serviced by your dealer. Air Cleaner 14 CTX1300-32MJN6000 .book 84 ページ ２?[...]

85 Maintenance Tool kit The tool kit is stored in the left saddlebag. 2 P. 67 You can perform some roadside repairs, minor adjustments and parts replacement with the tools contained in the kit. ● 5 mm Hex wren ch ● 6 mm Hex wren ch ● 10 mm Box wrench ● 10 × 12 mm Box en d wrench ● 14 × 17 mm Box en d wrench ● Standard/Phillips screwdr[...]

86 Maintenance Removing & Installing Body Components Seat The seat must be removed to access the colour label and accessory socket, to use the helmet holder, to store a U-shaped lock, and to remove the left side cover. ❙ Removal 1. Insert the ignition key into the lo ck. 2. Turn the ignition key clockwise and hold it, then pull rear of the se[...]

Removing & Insta lling Body Components u Left Inner Panel 87 Maintenance Left Inner Panel The left inner panel must be removed to access the battery, fuse box and main fuses A, B, to remove the left fairing pocket and left middle cowl. When removing and installing the left inner panel, be careful not to damage the tabs. ❙ Removal 1. Remove th[...]

Removing & Insta lling Body Components u Over Head Cover 88 Maintenance Over Head Cover The right over head cover must be removed to access the oil fill cap and spark plugs. The left over head cover must be removed to access the spark plugs, and to remove the left side cover. The right and left over head covers can be removed in the same manner[...]

Removing & Insta lling Body Components u Left Side Cover 89 Maintenance Left Side Cover The left side cover must be removed to access the coolant reserve tank cap. ❙ Removal 1. Remove the se at. 2 P. 86 2. Remove the left over head cover. 2 P. 88 3. Remove the clip A. 2 P. 94 4. Remove the cli p B. 2 P. 94 5. Remove the left side cover by rel[...]

Removing & Insta lling Body Components u Saddle bag 90 Maintenance Saddlebag The left saddlebag must be removed to service the rear suspen sion, and to remove the rear wheel. The right saddlebag must be removed to service the rear suspension. The right and left saddlebags can be removed in the same manner. ❙ Removal 1. Open the saddlebag. 2 P[...]

Removing & Installing Body Com ponents u Left Fairing Pocket 91 Maintenance Left Fairin g Pocket The left fairing pocket must be removed to access the fuse box and main fuse B. ❙ Removal 1. Open the left fairing pocket. 2 P. 67 2. Remove the left inner panel. 2 P. 87 3. Remove the clips A. 2 P. 94 4. Remove the left fairing pocket. ❙ Instal[...]

Removing & Insta lling Body Components u Left Shroud 92 Maintenance Left Shroud The left shroud must be removed to access the main fuse A, and to remove the left middle cowl. ❙ Removal 1. Remove the bolt A. 2. Remove the bolts B. 3. Remove the left shroud by releasing the tabs and prong. ❙ Installation Install the parts in the reverse order[...]

Removing & Installing B ody Components u Left Middle Cowl 93 Maintenance Left Mid dle Cowl The left middle cowl must be removed to access the main fuses A. ❙ Removal 1. Remove the left inner panel. 2 P. 87 2. Remove the left shroud. 2 P. 92 3. Remove the clip A. 2 P. 94 4. Release the prongs from the grommets. 5. Release tab A from the slot. [...]

Removing & Insta lling Body Components u Clip A 94 Maintenance Clip A The clip A must be removed to remove the left inner panel, left side cover, left fairing pocket and left middle cowl. ❙ Removal 1. Press down on the centre pin to release the lock. 2. Pull the clip out of the hole. ❙ Installation 1. Push the bottom of the centre pin. 2. I[...]

Removing & Installing Body Com ponents u Battery 95 Maintenance Batte ry ❙ Removal Make sure the ignition switch is off. 1. Remove the left inner panel. 2 P. 87 2. Remove the battery holder by removing the bolt. 3. Disconnect the negative - terminal from the battery. 4. Disconnect the positive + terminal from the battery. 5. Remove the batter[...]

96 Maintenance Spark Plugs Checking Spark Plug For the recommended spark plugs, se e “Specifications.” 2 P. 159 Use only the recommended type of spark plugs in the recommended heat rang e. 1. Remove the right and left over head covers. 2 P. 88 2. Disconnect the spark plug caps from the spark plugs. 3. Clean any dirt from around the spark plug b[...]

Spark Plugs u Checking Sp ark Plug 97 Maintenance 6. Check the spark plug gap using a wire- type feeler gauge. u If adjustment is necessary, bend the side electrode carefully. 7. Make sure the plug washer is in good condition. 8. With the plug washer attached, thread the spark plug in by hand to prevent cross-threading. 9. Tighten the spark plug: ?[...]

98 Maintenance Engine Oil Checking the Engine Oil 1. If the engine is cold, idle the engine for 3 to 5 minutes. 2. Turn the ignition sw itch off, stop the engine and wait for 2 to 3 minutes. 3. Place your motorcycle in an upright position on a firm, level surface. 4. Check that the oil level is between the upper and lower level marks in the oil lev[...]

Engine Oil u Adding Engine O il 99 Maintenance Adding Engine Oil If the engine oil is below or near the lower level mark, add the reco mmended engine oil. 2 P. 79 1. Remove the right over head cover. 2 P. 88 2. Remove the oil fill cap. Add the recommended oil until it reaches the upper level mark. u Place your motorcyc le in an uprigh t position on[...]

Engine Oil u Chang ing Engine Oil & Filter 100 Maintenance Changing Engine Oil & Filter Changing the oil and filter requires special tools. We recommend that you have your motorcycle serviced by your dealer. Use a new Honda Genuine oil filter or equivalent specified fo r your model. 1. If the engine is cold, idle the en gine for 3 to 5 minu[...]

Engine Oil u Chang ing Engine Oil & Filter 101 Maintenance 6. Remove the oil filter with a filter wrench and let the remaining oil drain out. Make sure the prior seal is not stuck to the engine. u Discard the oil and oil filter at an approved recycling centre. 7. Apply a thin coat of engine oil to the rubber seal of a new oil filter. 8. Install[...]

102 Maintenance Coolant Checking the Coolant 1. Place your motorcycle on a firm, level surface. 2. Hold your motorcycle in an upright position. 3. Check that the coolant level is bet ween the UPPER and LOWER level marks in the reserve tank from the inspection windows. If the coolant l evel is dropping n oticeably or the reserve tank is empty, you l[...]

Coolant u Changin g Coolant 103 Maintenance 4. Remove the reserve tank cap and add fluid while monitoring the coolant level. u Do not overfill above the UPPER level mark. u Make sure no forei gn objects ent er the reserve tank opening. 5. Securely reinstall the cap. 6. Install the parts in the reverse order of removal. Changing Coolant Have your de[...]

104 Maintenance Brakes Checking Brake Fluid 1. Place your motorcycle in an upright position on a firm, level surface. 2. Check that the bra ke fluid reservoir is horizontal and that the fluid level is above the LOWER level mark. Check that the brake fluid reservoir is horizontal and that the fluid level is between the LOWER le vel and UPPER level m[...]

Brakes u Inspecting the Brake Pads 105 Maintenance Inspecting the Brake Pads Check the condition of the brake pad wear indicators. The pads need to be replaced if a brake pad is worn to the indicator. 1. Inspect the brake pads from below of the brake caliper. u Always inspect both left and right brake calipers. 2. Inspect the brake pads from the re[...]

Brakes u Adjusting the Brakelight Switch 106 Maintenance Adjusting the Brakelight Switch Check the operation of the brakelight switch. Turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon. Brakelight switch Adjusting nut A B 14 CTX1300-32MJN6000 .book 106 ペ?[...]

107 Maintenance Clutch Checking Clutch Fluid 1. Place your motorcycle in an upright position on a firm, level surface. 2. Check that the clutch fluid reservoir is horizontal and that the fluid level i s above the LOWER level mark. If the fluid level is low or if you find fluid leaks, or deterioration or cracks in the hoses and fittings, have the cl[...]

108 Maintenance Side Stand 1. Check that the side stand operates smoothly. If the side stand is stiff or squeaky, clean the pivot area and lubricate the pivot bolt with clean grease. 2. Check the spring for damage or loss of tension. 3. Sit on the motorcycle, put the transmission in Neutral, and raise the side stand. 4. Start the engine, pull the c[...]

109 Maintenance Final Drive Oil Changing Final Drive Oil 1. Place your motorcycle on its centre stand on a level surface. 2. Place a drain pan under the drain bolt. 3. Remove the oil fill hole cap, O-ring, drain bolt and sealing washer to drain the oi l. 4. Install a new seali ng washer onto the drain bolt. Tighten the drain bolt. 5. Fill the final[...]

110 Maintenance Throttle Checking the Throttle With the engine off, ch eck that the thr ottle rotates smoothly from fully closed to fully open in all steering positions and throttle freeplay is correct. If the throttle does not move smoothly, close automatically, or if the cable is damaged, have the motorcycle inspected by your dealer. Freeplay at [...]

111 Maintenance Other Adjustments Adjusting the Brake Leve r You can adjust the distance between the tip of the brake lever and handle grip. ❙ Adjustment method Turn the adjuster unt il the numbers align with the index mark wh ile pushing the lever forward in the desired position. After adjustment, check that the levers operate correctly befor e [...]

Other Adjustments u Adjusting the Rear Suspension 112 Maintenance Adjusting the Rear Suspension ❙ Spring Preload You can adjust the spring preload by the adjuster to suit the lo ad or t he road surface. 1. Remove the right and left saddlebags. 2 P. 90 2. Adjust the spring p reload aligning the adjustment position with the arrow mark. u Use the pi[...]

Other Adjustm ents u Adjusting the Headlight Aim 113 Maintenance Adjusting th e Headli ght Aim You can adjust vertical aim of the headlight for proper alignment. Turn the knobs in or out as necessary. Obey local laws and regulations. Lower Raise Raise Lower Knobs 14 CTX1300-32MJN6000 .book 113 ページ ２０１３年１２月１１ 日　水曜?[...]

Troubleshooting Engine Will Not Start (HISS indicator stays on) ... .............. .......... ............. ........... .... P. 115 Overheating (High coolant temperature indicator is on) ........................................ P. 116 Warning Indicators On or Fla shing ......... P. 117 Low Oil Pressure Indicator....................... .P. 117 PGM-F[...]

115 Troubleshooting Engine Will Not Start (H ISS indicator stays on) ❙ Starter Motor Operates But Engine Does Not Start Check the following items: ● Check the correct engine starting sequence 2 P. 61 ● Check that there is petrol in the fuel tank ● Check if the PGM-FI malfunction indicator lamp (MIL) is on u If the indicato r light is on, co[...]

116 Troubleshooting Overheating (High coolant temp erature indicator is on) The engine is overheating when the following occurs: ● High coolant temperature indi cator comes on and the 6th (H) segment flashes in the coolant temperature gauge. ● Acceleration becomes sluggish. If this occurs, pull safely to the side of the road and per form the fo[...]

[...]

Warning In dicators On or F lashing u ABS (Anti-lock Brake System) Indicator 118 Troubleshooting ABS (Anti-lock Brake Sys tem) Indicator If the indicator operates in one of the following way s, you may have a serious problem with the brake system. Reduce your speed and hav e your motorcycle in spected by your dealer as soon as possible. ● Indicat[...]

Warning Indic ators On or Fl ashing u TCS (Traction Control System) Indicator 119 Troubleshooting TCS (Traction Control System) Indicator If the indicator operates in one of the following ways, you may have a serious problem with the TCS (Traction Control System). Reduce your speed and have your motorcycle inspec ted by your dealer as soon as possi[...]

120 Troubleshooting Other Warning Indications Fuel Gauge Failure Indications If the fuel system has an e rror, the fuel gauge will be displayed as shown in the illustration. If these occur, see your dealer as soon as possible. Coolant Temperature Gau ge Failure Indication If the cooling system has an error, all segments will blink or go off as show[...]

Other Warning Indications u Hand le Grip Heater Failure Indication 121 Troubleshooting Handle Grip Heater Failure Indication If the handle grip heater system has an error, the handle grip heater status icon will blink. If the “E-1”, “E-2” o r “E-3” blinki ng does not go off, see your dealer as soon as possible. Handle grip heat er statu[...]

122 Troubleshooting Tyre Puncture Repairing a puncture or removing a wheel requires special tools and technical expertise. We recommend you have this type of service performed by your dealer. After an emergency repair, always have the tyre inspe cted/repl ac ed by your dealer. Emergency Repair Using a Tyre Repair Kit If your tyre has a minor punctu[...]

Tyre Puncture u Removing Wheels 123 continued Troubleshooting When removing and installing the wheel, be careful not to damage the wheel speed sensor and puls er ring. ❙ Front Wheel Removal 1. Park on a firm, level surface. 2. Cover both sides of the front wheel and brake calipers with protective tape or cloth. 3. On the left side, remove the mou[...]

Tyre Puncture u Removing Whe els 124 Troubleshooting 5. Loosen the right front axle pinch bolts . 6. Remove the front axle bolt. 7. Support your motorcycle securely and raise the front wheel off the ground using a maintenanc e stand or a hoist. 8. Loosen the left front axle pinch bolts. 9. On the left side, withdraw the front axle shaft, and remove[...]

Tyre Puncture u Removing Wheels 125 continued Troubleshooting Installation 1. Attach the side collars to the wheel. 2. On the left side, place the wheel between the fork legs and insert the front axle shaft to the end, through t h e left fork leg and wheel hub. 3. Align the end of the front axle shaft with the surface of the fork leg. 4. Tighten th[...]

Tyre Puncture u Removing Whe els 126 Troubleshooting 8. Install the right brake caliper and tighten new mounting bolts. 9. Install the left brake caliper and tighten new mounting bolts. u Take care to prevent the brake caliper from scratching the wheel during installation. u Use new mounting bolts when installing the brake calipers. 10 . Lower the [...]

Tyre Puncture u Removing Wheels 127 continued Troubleshooting ❙ Rear Wheel Removal 1. Place your motorcycle on its centre stand on a level surface . 2. Remove the left saddlebag. 2 P. 90 3. Remove the bolts. 4. Remove the rear fender by releasing the tab. 5. Cover left side of the rear wheel and brake caliper with protective tape or cloth. Tab Re[...]

Tyre Puncture u Removing Whe els 128 Troubleshooting 6. Remove the rear axle nut a n d washer A. 7. Remove the rear brake caliper stopper bolt. 8. Loosen the rear axle pinch bolt. 9. Withdraw the rear axle shaft, and remove the washer B. 10 . Release the rear brake caliper. 11 . Remove the rear wheel and side collar. Washer A Rear axle nut Stopper [...]

Tyre Puncture u Removing Wheels 129 continued Troubleshooting Installation Before installing the rear wheel, check that the wheel hub and final dr ive gear splines are coated with molybdenum disulfide paste. 1. To install the rear wheel, reverse the removal proced ure. u Take care to prevent the brake caliper from scratching the wheel during instal[...]

Tyre Puncture u Removing Whe els 130 Troubleshooting 2. Align the end of the r ear axle shaft with the surface of the swingarm. 3. Tighten the rear brake caliper stopper bolt. 4. Tighten the rear axle pinch bolt to hold the rear axle shaft. 5. Tighten the rear axle nut. 6. Lower the rear wheel on the ground. 7. Loosen the rear axle pinch bolt. 8. P[...]

131 continued Troubleshooting Audio System Trouble Symptom Cause/remedy Unable to pair Bluetooth r device Some Bluetooth r devices and applications software you use may be incompatible with the audio syst em and/or the ope rable functions may be li mited. Check that the audio system and Bluetooth r device are both in the pairing mode . 2 P. 51 Chec[...]

Audio System Trouble 132 Troubleshooting Symptom Cause/re medy Unable to connect Bluetooth r device Depending on the Bluetooth r device and application software you use, it may take some time for the audio system to connect to device and to start playing an audio file. The connection may be temporaril y disconnected when starting the engine, which [...]

Audio System Trouble 133 Troubleshooting continued Symptom Cause/remedy Unable to connect Bluetooth r device Some Bluetooth r devices and applications software you use may not be connected automaticall y. For connecting , follow the instructions in the instruction manual of your Blu etooth r device. The Bluetooth r devices that can be connected at [...]

Audio System Trouble 134 Troubleshooting Symptom Cause/re medy Connected, bu t does not play. Some Bluetooth r d evices and applications software yo u use may be incompatible with the audio system and/or audio files may not be played properly. Check the recommended specifications. 2 P. 46 Depending on the Bluetooth r device and applications softwar[...]

Audio System Trouble 135 Troubleshooting continued Symptom Cause/remedy Sounds skip Noises mix Presence of another Bluetoo th r device or a device that emits electromagnetic waves such as co mmunication equi pment in the vicinity sometimes affects the communication. Due to the characteristics of Bl uetooth r , though in rare cases, the system opera[...]

Audio System Trouble 136 Troubleshooting Symptom Cause/re medy Sounds skip Noises mix Depending on the Bluetooth r device and applications software you use, an audio file may not be played normally after receiving a telephone call, etc. Chan ge the audio mode ( 2 P. 50) or turn off the power to the audio system and then turn it on again. If the ski[...]

Audio System Trouble 137 Troubleshooting If the problem continues after the above-describe d inspection, have your motorcycle inspected by your dealer. Symptom Cause/remedy About USB device Some USB devices may be incompatible with the audio system and/or their operable functi ons may be limited. When the audio system does not reco gnize the USB de[...]

138 Troubleshooting Electrical Trouble Battery Goes Dead Charge the battery using a motorcycle battery charger. Remove the battery from the motor c ycle before charging. Do not use an automobile-type battery charger, as these can overheat a motorcycle battery and cause permanent damage. If the battery does not recover after recharging, contac t you[...]

Electrical Trouble u Burned-out Light B ulb 139 continued Troubleshooting ❙ Front Turn Signal Light The front turn signal light uses several LEDs. If there is a LED which is not tur ned on, see your dealer for this service. ❙ Brakelight/Taill ight/Rear Turn Signal Light The brakelight, taillight and rear turn signal lights use several LEDs. If [...]

Electrical Trouble u Burned- out Light Bulb 140 Troubleshooting ❙ License Plate Li ght The license plate light uses several LEDs. If there is a LED which is not turned on, see your dealer for this service. License plate light 14 CTX1300-32MJN6000 .book 140 ページ ２０１３年１２月１１ 日　水曜日　午後２時 ５１分[...]

Electrical Trouble u Blown Fuse 141 continued Troubleshooting Blown Fuse Before handling fuses, see “Inspecting and Replacing Fuses.” 2 P. 78 ❙ Fuse Box Fuses 1. Remove the left inner panel. 2 P. 87 2. Remove the left fairing pocket. 2 P. 91 3. Remove the fuse box cover. 4. Pull the fuses out one by one with the fuse puller in the tool kit ( [...]

Electrical Trouble u Blown Fuse 142 Troubleshooting ❙ Main Fuse B 1. Remove the left inner panel. 2 P. 87 2. Remove the left fairing pocket. 2 P. 91 3. Remove the fuse cover. 4. Check for a blown fuse. If main fuse B is blown, see your deal er for t his service. 5. Reinstall the fuse cover. 6. Install the parts in the reverse order of removal. Fu[...]

Electrical Trouble u Blown Fuse 143 Troubleshooting ❙ Main Fuse A 1. Remove the left inner panel. 2 P. 87 2. Remove the left shroud. 2 P. 92 3. Remove the left middle cowl. 2 P. 93 4. Remove the starter m agnetic switch cover. 5. Pull the main fuse A out with the fuse puller in the tool kit ( 2 P. 67) and check for a blown fuse. Always replace a [...]

Information Keys ........................................................... P. 145 Instruments, Controls, & Other Fe atures .. P. 146 Fuels Containing Alcoh ol ......................... P. 149 Catalytic Converters ................................. P. 150 Caring for Your Motorcycle ..................... P. 151 Storing Your Motorcycle ..........[...]

Keys 145 Information Keys This motorcycle has two ignition keys and a key tag with a key nu mber and a bar code. The ignition key contains a special coded chip that is recognized by the immobilizer system (HISS) in order to start the engine. Handle the key carefu lly to prevent d amaging the HISS components. ● Do not bend keys or subject them to [...]

Instruments, Controls, & Ot her Features 146 Information Instruments, Controls, & Other Features The headlight is always on when the ignition switch is ON. Leaving th e ignition switch ON with the engine stopped will drain the battery. Do not turn the key while riding. Do not use the engine stop switch excep t in an emergency. Doing so when[...]

Instruments, Controls, & Other Feature s 147 continued Information EC Directive This immobilizer system complies with R & TTE (Radio and Teleco mmunications Terminal Equipment and the mutual recogniti on of their conformity) Directive. The declaration of confo r mity to R & TTE Directive is provided to the owner at the time of purchase.[...]

Instruments, Controls, & Ot her Features 148 Information EC Directive This audio systems complies with R & TTE (Radio and Telecommunication s Terminal Equipment and the mutual recogni tion of their conformity) Directive. The declaration of conformity to R & TTE Directive is prov ided to the owner at the time of purchase. The declaration[...]

Fuels Containing Alco hol 149 Information Fuels Containing Alcohol Some conventiona l fuels blended with alco hol are available in some locales to hel p reduce emissions to meet clean air standards. If you plan to use blended fuel, check that it is unleaded and meets the minimum octane rating requirement. The following fuel blends can be used in yo[...]

Catalytic Converters 150 Information Catalytic Converters This motorcycle is equi pped with two three-way catalytic converters. Each catalytic converter contains precious metals that serve as catalysts in high temperature ch emical reactions that convert hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx) in the exhaust gasses int[...]

Caring for Your Motorcycle 151 continued Information Caring for Your Motorcycle Frequent cleaning and p olishing is important to ensure the life of your Honda. A clean motorcycle makes i t easier to spot potential problem s. In particular, seawater and salts used to pre vent ice on roads promote the formation of corrosion. Always wash your motorcyc[...]

Caring for Your Mo torcycle 152 Information ❙ Washing Precautions Follow these guidelines when washing: ● Do not use hi gh-pres sure washers: u High-pressure water cleaners can damage moving parts and electrical parts, rendering them inoperable. ● Do not direct wat er at the muffler: u Water in the muffler can prevent starting and causes rust[...]

Caring for Your Motorcycle 153 continued Information Aluminium wi ll corrode from contact with dir t, mud, or road salt. Clean aluminium parts regularly and follow these guideline s to avoid scratches: ● Do not us e stiff brushe s, steel wool, or cleaners containing abrasives. ● Avoid riding over or scraping against curb s. Follow these guid el[...]

Caring for Your Mo torcycle 154 Information The exhaust pipe a nd muffler are stainless steel but may become stained by mud or dust. To remove mud or dust, use a wet sponge and a liquid kitchen abrasive, then rinse well with clean wate r. Dry with chamois or a soft towel. If necessary, remove heat stains by using a commercially available fine tex t[...]

Storing Your Motorcycle 155 Information Storing Your Motorcycle If you store your motorcycle outdoors, you should consider usi ng a full-body moto rcycle cover. If you won’t be riding for an extended period, follow these guidelines: ● Wash your motorcycle and wax all painted surfaces (except mat painted surfaces). Coat chrome pieces wi th rust-[...]

You & the Environment 156 Information You & the Environment Owning and riding a motorcycle can b e enjoyable, but you must do your part to protect the environment. Use a biodegradable deterge nt when you wash your motorcycle. Avoid aerosol spray cleaners that contain chloro fluorocarbons (CFCs) which damage the atmosphere’s protec tive oz[...]

Serial Numbers 157 Information Serial Numbers The frame and engi ne serial numbers uniquely identify your motorcycle and are required in order to register yo ur motorcycle. They ma y also be required wh en ordering rep lacement part s. The frame number is stamped on the right side of the steering head. The engine numbe r is stamped on the right si [...]

158 Specifications Specifications Specifica tions ■ Main Comp onents *1 Including rider, passenger, all luggage, and accessories *2 Includes the weight of the luggage and added accessories. Type SC74 Overall length 2,380 mm (93.7 in) Overall width 940 mm (37.0 in) Overall height 1,170 mm (46.1 in) Wheelbas e 1,645 mm (64.8 in) Minimum ground clea[...]

Specifications 159 Specifications ■ Service Data Tyre size Front 130/70R18M/C 63V Rear 200/50R17M/C 75V Tyre type Radial, tubeless Recommend ed Tyres Front DUNLOP D423F BRIDGESTONE G853 RADIAL F Rear DUNLOP D423 BRIDGESTONE G852 RADIAL F Tyre air pressure Front 250 kPa (2.50 kgf/cm 2 , 36 psi) Rear 290 kPa (2.90 kgf/cm 2 , 42 psi) Minimum tread d[...]

Specifications 160 Specifications ■ Bulbs ■ Fuses ■ Torque Specificatio ns Headlight LED Brakelight LED Taillight LED Front turn signal li ghts L ED Rear turn signal lights LED License plate l ight LED Main fuse A 30A B 65A Other fuses 30A, 20A, 10A Engine oil drain bol t 29 N·m (3.0 kgf·m, 21 lbf·ft) Oil filte r 26 N·m (2.7 kgf·m, 19 lb[...]

161 Index Index Index A ABS (Anti-lock Brake System) Indicator .......... ............. ............. ...... 36, 118 Accessories.... ............. ............. ............. ...... 16 Accessory Socket ......... ............. .............. ... 69 Air Temperat ure Gauge .......... ........... 22, 25 Amount of Remaining Fuel Meter..... 22, 26 AUDIO [...]

162 Index C Caring for Your Mo torcycle .......... .......... 151 Changing the Audio Mode . ............. ......... 50 Clock.. .............. .......... ............. ........ 21, 28, 31 Clutch System ................ ............. ............. 107 Colour l abel .............. ........... ............. ......... 76 Combined ABS ....... ...........[...]

163 Index Fuels Containing Alcohol ........... ............ 149 Fuses ....... ........... ............. ............. ...... 78, 141 G Gasohol... ............. ........... ............. ............ 149 H Handle Gr ip Heater ............. ............. . 42, 121 Handle Grip Heater Swit ch.... ............. 38, 42 Hazard Switch ........ ............[...]

164 Index M Maintenance Fundamentals ................ ............. ........... ... 75 Importance ...... ............. ............. ........... .... 71 Safety .............. ........... ............. ............. .... 71 Schedule .................... ............. .......... ....... 7 2 Maximum Wei ght Limit ................ ............ 17 MODE [...]

165 Index Left Fairing Pocket ............ ............. ........... 91 Left Inner Panel .......... ............. .............. ... 87 Left Middle C owl .. ............. ............. ......... 93 Left Shroud .............. ............. ............. ...... 92 Left Side Cover. ............. ............. ............. . 89 Over Head Cover...... .[...]

166 Index T Tachomet er....... ............. ........... ............. .... 20 TCS (Tract ion Control System ) . ............. .... 15 TCS (Traction Control System) Indicator ........ ............. ............. ......... 37, 119 TCS (Traction Control System) off Indicator ........ ............. ............. .......... ....... 37 TCS (Traction Con[...]