Honeywell 4600g инструкция обслуживания

4600g, 4600r, 4600rp, 4800i Quick Start Guide[...]

1 Note: Refer to your user’s guide for information about cleaning your device. For localized language vers ions of this document, go to www.honeywell.com/aidc. Getting Started Turn off computer’s powe r before connecting the scanner, then power up the computer once the scanner is fully connected. USB Connection[...]

2 Ke yboard W edge Connection Serial (RS-232) Connection[...]

3 Reading T echniques The view finder projects an aiming beam that should be centered over the barcode, but can be positioned in any direction for a good read. Hold the scanner over the barcode, pull the trigger, and center the aiming beam on the barcode. The aiming beam is smaller when the scanner is closer to the code and larger when it is farthe[...]

4 Interface Scan the barcode that descr ibes the PC or interface you are using. AT/PS2 Keyboard Wedge (Default) RS-232 USB Keyboard (PC) Emulate External Keyboard Japan DOS/V USB Japanese Keyboard (PC)[...]

5 Ke yboar d Country Scan the Program Keyboard Country barcode below, then scan the nu meric barcode(s) from page 10 , then the Save barcode to program the keyboard for your country. As a general rule, the following characters are not supported by the scanner for countries other than the United States: @ | $ # { } [ ] = / ‘ < > ~. Note: F[...]

6 Tr i g g e r The following barcodes w ill allow you to use the reader in Manual Trigger mode (need to press the trigger to read) or Presen tation mode (the reader is activated when it “sees” a barcode). Streaming Presentation™ Note: Streaming Presentat ion Mode applies only to units with the Advanced Illumination feature. Units with the adv[...]

7 Reread Delay This sets the time peri od before the scanner can read the same barcode a second time. Setting a reread delay protects against accidental rereads of the same barcode. Suffix If you want a carriage return after the barcode, scan the Add CR Suffix barcode . To add a tab after the barcode, scan the Add T ab Suffix barcode. Otherwise, sc[...]

8 Add Code ID Prefix to all Symbologies Scan the following barcode if you wish to add a Code ID prefix to all symbologies at once. Note: For a complete list of Code IDs, see the User’s Guide for your product at our website, www.honeywell.com/aidc. Function Code T ransmit When this selection is enabled and function codes are contained within the s[...]

9 Data Format Editor Instructions The following are abbrevi ated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.honeywell.com/aidc. 1. Scan the Enter Data Format symbol. 2. Primary/Alternate Format: scan 0 for Primary Format 3. Terminal Type: scan 099 for any terminal t[...]

10 Programming Chart 0 2 1 4 3 5 6 7[...]

11 A B C D E F 9 8 Save[...]

12 Visual Xpress™ To obtain access to additional features for the imager, use Visual Xpress, available from our website at www.honeywell.com/aidc. For complete download instructions and descriptions of Visual Xpress features, refer to your User’s Guide. T echnical Assistance If you need assistance insta lling or troubleshooting your device, ple[...]

13 Asia Pacific Telephone - Hong Kong: +852-3188-3485 or 2511-3050 Telephone - China: +86 21 6361 3818 E-mail: aptechsupport@honeywell.com Japan Telephone: +813 5770-6312 E-mail: aptechsupport@honeywell.com Malaysia Telephone: +603-6201-7020 E-mail: aptechsupport@honeywell.com Online T echnical Assistance You can also access technical assistance on[...]

14 North America Telephone: (800) 782-4263 Fax: (803) 835-8012 E-mail: naservice@honeywell.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 Fax: (239) 263-9689 E-mail: laservice@honeywell.com Brazil Telephone: +55 (21) 3535-9100 Fax: +55 (21) 3535-9105 E-mail: brservice@honeywell.com Mexico Telephone: +52 (55) 5203-2100 Fax: +5[...]

15 Online Product Service and Repair Assistance You can also access product service and repair assistance online at www.honeywell.com/aidc . Limited W arranty Honeywell International Inc. ("Honeywell") warrants its products to be free from defects in materials and workmanship and to conform to Honeywell’s published specifications applic[...]

16 This warranty shall extend from the time of shipment for the duration published by Honeywell for the product at the time of purchase ("Warranty Period"). Any defective product must be returned (at purchaser’s expense) during the Warranty Period to Honeywell factory or authorized service center for inspection. No product will be accep[...]

17 HONEYWELL’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS. IN NO EVENT SHALL HONEYWELL BE LIABLE FOR INDIRECT, INCIDENT AL, OR CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HONEYWELL ARISING IN CONNECTION WIT[...]

18 Disclaimer Honeywell International Inc. (“Honeywell”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader shou ld in all cases consult Honeywell to determine whether any such changes have been made. The information in this publication does not represent a [...]

Honeywell 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 2D-02-QS Rev D 10/08[...]