Honeywell FUSION инструкция обслуживания

DRMU000834–Rev. J – March 20 05 FUSION DVR Digital Recording and Transmission System User Manual[...]

ISSUE DATE REVISIONS A October 2003 Initial Release (PCN 1572) B January 2004 Revised PTZ information. C March 2004 Updated format and content (PCN 17 18). D June 2004 Updated format and content. E October 2004 Updated content, clarifi ed ambiguou s feature descriptions, and updated DVR chassis images. F November 2004 Updated content for v.2.3.2 so[...]

FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DI GITAL DEVICE, PURSUA NT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGN ED TO PROVIDE REASO NABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMEN[...]

NATIONAL POWER DEVIATION STANDARDS AUSTRALIA / NEW ZEALAN D COMPONENTS COMPL Y WITH THE RELEVANT PO RTIONS OF IEC 60950 OR T HE APPLICABLE COMPONENT STANDA RD OR THE RELEVANT AUSTRALIAN / NE W ZEALAND STANDARD. AC POWER DISTRIBUTION SYSTEMS CLASSIFI ED AS TT OR IT ARE NOT ALLOWED INTENDED FOR USE ON A TN SYSTEM. ---------- ---------- ---------- ---[...]

EQUIPMENT HAVING A RATED CURRENT EXCEEDING 13 A IS PROVIDED WITH A SUPPLY CORD WITH A PLUG, THIS PLUG SHA LL BE IN ACCORDANCE WITH THE HEAVY CURRENT. GERMANY (GESETZ UBER TECHNISCHE ARBEITSMITTEL (GARATESICHERHEITSGESETZ) [LAW OF TECHNICAL LABOUR EQUIPMENT { EQUIPMENT SAFETY LAW}], OF 23RD OCTOBE R 1992, ARTICLE 3, 3RD PARAGRAPH, 2ND SENTENCE , TOG[...]

RACK MOUNT INSTRUCTIONS A) Elevated Operating Ambient – If installed in a closed or multi -unit rack assembly, the operating ambient temperature of the rack environm ent may be greater than room ambient. Therefore, consideration should be gi ven to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) sp[...]

EN 50130-4:1996 Notice 1. Uninte rrupted Power supply (UPS) 2. Maximum len gths of wiring connected to t he sensor inputs an d control outputs are 30 meters. EN 55022 CLASS A Notice WARNING This is a class A product. In a dome stic environment this product may cause radi o interference in which case the user may be required to take ad equate measur[...]

OPTICAL AND ACOUSTICAL STATEMENTS VISIBLE LED STATEMENT The LEDs on this DVR unit are classified as “Cla ss 1 L ED Product” in accordance with EN 60825-1. LASER SAFETY STATEMENT FO R A CLASS 1 LASER PRODUCT This CD-ROM Storage device has been tested an d found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC[...]

IMPORTANT SAFEGUARDS 1. Read Owner’s Manual – After unpacking this product, read the owner’s manu al carefully, and follow all the operating and other inst ruction 2. Power Sources – This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home or busi[...]

IMPORTANT SAFEGUARDS, CONTINUED 15. Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified service personnel under th e following conditions: a. Whe n the power-supply cord or plug is damaged. b. If liquid has b een spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water[...]

IMPORTANT SAFEGUARDS, CONTINUED NOTES ON CLEANING • Use a soft dry cloth for cleaning. • For stubborn dirt, soak the cloth in a weak det ergent solutio n, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the DVR unit . • If you use a chemical sa[...]

WARNING TO REDUCE THE RISK OF ELEC TRICAL SHOCK, DO NOT EXPO SE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION CAUT ION: TO R EDUCE TH E R ISK O F E LECT RIC SHO CK, DO NOT REMO VE CO VER (OR BAC K). NO USER -SER V ICEABLE P [...]

[...]

[...]

TABLE OF CONTENTS SECTION 1 INTROD UCTION ................................................................. 1–1 1.1 PRODUCT DES CRIPTIO N .......................................................................................................... 1– 1 1.2 FEATURES ...................................................................................[...]

5.4 GENERAL SETUP .................................................................................................................. ..... 5–6 5.4.1 VOICE WARN ING .............................................................................................................. 5–7 5.4.2 INTENSIVE RECORD ING OVERVIEW ...............................[...]

6.8 DAYLIGHT SAVI NGS TI ME ........................................................................................................ 6– 7 6.9 TIME SYNC ...................................................................................................................... ............ 6–7 6.10 PRINTING AN IMAGE ...................................[...]

8.2 DirectCD FORM AT UTILITY ........................................................................................................ 8–1 8.3 FORMATTING A CDR OR CD-RW DISC.................................................................................... 8–3 8.4 GENERAL BACKUP OP TIONS OVER VIEW ...............................................[...]

SECTION 14 THE WE B VIEWER ......................................................... 14–1 14.1 WEB VIEWER OVERVI EW ....................................................................................................... 14–1 14.1.1 CONFIGURING THE DVR SERVER T O A CCEPT REMOTE CONNECTIONS .......... 14–2 14.1.2 CONNECTING TO A DVR WI TH T HE [...]

NOTES:[...]

1–1 SECTION 1 INTRODUCTION 1.1 PRODUCT DESCRIPTION The Honeywell Fusion DVR is sim ply a server that performs as a High Definition Digital Recorder. By utilizing the many features of a computer, including processing power, storage capacity, graphics compression, and se curity feature s, the DVR unit is more powerful than the analog recorders of t[...]

FUSION DVR Digital Re cording and Transmission S ystem 1–2 1.2 FEATURES, CONTINUED • Up to 32 Looping Outputs • Optional POS and ATM Support • 1 Composite Output • S Video Output • Up to 32 Camera Inputs • High Performance, Durable, Rack mount Case • Output the Video to a NTSC/PAL Display • Virtually Unlimited Storage Potential ?[...]

2–1 SECTION 2 CONTROLS AND CONNECTIONS 2.1 BASIC FEATURES Honeywell’s state-of-the-art High Definiti on Digital Recorders are housed in a hi gh performance and versatile 4U Alumin um Rack-Mount case allowing easy storage of multiple DVRs for enterprise applications. Every Fusio n DVR Unit comes equipped with the latest technology • Intel® Pe[...]

FUSION DVR Digital Re cording and Transmission S ystem 2–2 2.2 FRONT PANEL CONTROLS AND LEDS The front panel of the DVR unit contains the devices that will be commonly used for data removal, retrieval, and backup replacement. The most common comp onents and buttons are shown below. ID Description 1 CD-RW Drive 2 CD-RW Open Tray Button 3 Hard Driv[...]

CONTROLS AND CONNECTIONS 2–3 connections display ed may not be available or functi onal on specific models. The rear panel of the DVR unit contains virtua lly all of the connecto rs you will be using. Below is a diagram that outlines the loca tion and description of each conn ector: 32 Channel ID Description ID Description 12 Audio Line In 1 BNC [...]

FUSION DVR Digital Re cording and Transmission S ystem 2–4 ID Description ID Description 12 Audio Line In 1 BNC Connectors for Video Input and Looping Outputs 13 USB Ports 2 Control Alarm Outputs / Sensor Inputs 14 RJ-45 Network Jack 3 Termination Switches 15 DB-9 Serial Input 1 4 Audio Inputs 16 LPT Parallel Printer Port 5 RS-422 Interface 17 DB[...]

3–1 SECTION 3 GETTING STARTED 3.1 IDENTIFYING INCL UDED COMPONENTS Honeywell’s Fusion DVRs come with a mouse, keyboard and selected software and cables. Identify the following compone nts to make sure everything has been properly included with your new DVR unit. If any of t he following items are m issing, contact your dealer to arrange a repla[...]

FUSION DVR Digital Re cording and Transmission S ystem 3–2 3.2 KEYBOARD SETUP To attach the keyboard to the DVR unit, plug the end of the Keyboard cable into the keyboard PS/2 Port located on the back of the machine. The keyboard PS/2 Port can be identified by the purple color. Refer to Section 2.3 – Rear Panel Connectors for more information. [...]

GETTING STARTED 3–3 3.4 MONITOR SETUP Attach the Monitor to the Rear of the DV R unit using the VGA cable supplied by the Monitor Manufacturer. Refer to the monitor manual for detailed information on ho w to setup and use it. NOTE: The monitor you use must be capabl e of having a screen resolution of 1024 x 768 and display colors of at least 32 B[...]

FUSION DVR Digital Re cording and Transmission S ystem 3–4 3.6 CONNECTING A VIDEO SOURCE TO THE DVR There are different types of Video Sources that can be plugg ed into your DVR unit including DVD players, VHS players, and CCTV Cameras. The b ack of the DVR unit contains up to 32 video inputs depen ding on the DVR model. The connectors are standa[...]

GETTING STARTED 3–5 3.6 CONNECTING A VIDEO SOURCE TO THE DVR, CONTINUED 16 Channel DVR 32 Channel DVR Inputs # 1-16 Inputs # 1-32[...]

FUSION DVR Digital Re cording and Transmission S ystem 3–6 3.7 LOOPING OUTPUTS The 8 and 16 Channel DVR units may h ave up to 16 Looping outputs. Depending on the destination of the outputs, each output may have to be terminated. 8 Channel DVR 16 Channel DVR The Video inputs are BNC connectors. Make sure th ere is a video source conn ected to the[...]

GETTING STARTED 3–7 3.8 LOOPING OUTPUT TERMINATION When terminating the outputs become s necessary, the DVR unit has built-in termination that allows you to select individual outputs to be terminat ed. Generally it is not necessary to terminate the output when using it. It is dependant on if the device to which you are connecting it, has internal[...]

FUSION DVR Digital Re cording and Transmission S ystem 3–8 3.10 CONNE CTING CONTROL OUTPUTS TO THE DVR Each DVR unit may have up to 16 Contro l Outputs. These outputs can b e used to trigger devices such as Sirens, Phone Dial ers, Lights, and any other relay activated device. Control Output • Use 12V, below 300mA. For controlling li ghts or oth[...]

GETTING STARTED 3–9 3.11 ADDITIONAL OUTPUTS AND CONNECTO RS 240/480 FPS Operat ion LED 485 RS Signal Line (+ ) Signal Line ( -) Ground RX LED TX LED 120 FPS PTZ to RS 23 2 convert er 485 RS Signal Li ne (+ ) Signal L ine ( - )[...]

FUSION DVR Digital Re cording and Transmission S ystem 3–10 3.12 OPTIONAL COMPONENTS To fully utilize your DVR unit’s potential, several optional Fusion compone nts are listed below. Contact your dealer for more information. DVD ROM Recordable Drive SCSI Adaptor USB External Hard Drive USB Modem Fiber Network Interface Adapter 4 Port Analog Out[...]

4–1 SECTION 4 DVR BASICS 4.1 TURNING ON THE DVR Once the cables have been prop erly connected (see Chapter 2 – Controls and Connections), it is time to turn on the power. 1. Turn o n the monitor and any external pe ripherals (ex. Printers, External Storage Devices, etc.) connected to the DVR unit . 2. Turn o n the main power switch located on t[...]

FUSION DVR Digital Re cording and Transmission S ystem 4–2 4.3 DISPLAY SCREEN Each time the DVR is restarted, the program defaults to the Display screen. The following diagram outlines the b uttons and features used on the Display screen. Become familiar with these options as this is the screen that will be displayed the majority of the time. 1 L[...]

DVR BASICS 4–3 4.3 DISPLAY SCREEN, CONTINUED 2 Second 16 Displays the secon d set of 16 camera s (Only available on the 32 Channel unit) 3 First 16 Displays the first set of 16 cameras (Only available on the 32 Channel unit) 4 Date/Time Displays current date and time. This date and time is stamped onto the recorded video and is displayed whenever[...]

FUSION DVR Digital Re cording and Transmission S ystem 4–4 4.4 CAMERA VIEW The Cameral status for each camera i s displayed next to the Camera number (or name) on the Video Display Area. 1 2 3 1 Camera Number and Name Displays the camera number and the custom name given to the camera. 2 Recording Status Displays the current recording status of th[...]

DVR BASICS 4–5 Special Recording There are several different types of DV R “Special Recordin g” situations. When this happens, text is displayed on the came ra indicating what kind it is. Sensor Displays when a sensor, associated with a given ca mera, is activated. Instant Instant Recording is a manual activation of the recording for the sele[...]

FUSION DVR Digital Re cording and Transmission S ystem 4–6 4.6 SCREEN DIVISION MENU, CONTINUED 4 th Four Cameras Displays cameras 13-16 in the Video Display Area. To return to a different Mu lti-Camera View, select a different Screen Division option from the Scree n Division menu. 1 st Eight Cameras Displays cameras 1-9 in the Video Displ ay Area[...]

DVR BASICS 4–7 4.7 TV OUTPUT CONTROLS (OPTIONAL) The TV OUT options allows manual cont rol the 4 analog output s on the back of the DVR. Within setup the outputs can be prog ramm ed to sequence through any n umber of cameras, however, by using the TV OUT options that defined sequence can be temporarily stopped and a came ra can be manually select[...]

FUSION DVR Digital Re cording and Transmission S ystem 4–8 NOTES:[...]

5–1 SECTION 5 SETUP OPTIONS 5.1 SETUP OVERVIEW The Setup options allow optimization your DVR unit by adjustin g things like camera names, recording schedules and more. It is extremely important to setup your DVR correctly for sever al reasons: • Recording Schedules – Increase the amount of pertinent recorded video that is saved on the DVR by [...]

FUSION DVR Digital Re cording and Transmission S ystem 5–2 5.2 CAMERA SETUP 2 6 5 7 1 4 3 8 1 Select Camera Selects the current camera to be edited. 2 Video Display Displays the live video of the current camera sele cted. 3 Camera Name Ability to specify a name for each camera. (up to 14 characters for ever y camera) 4 Adjust Default Adjusts the [...]

SETUP OPTIONS 5–3 5.3 MOTION 1 Select Camera Selects the current camera to be edited. 2 Pre-Alarm Allows record of a section of video just prio r to motion or sensor activation. 3 Motion Region Setup The box displays the video for the select ed cameras and allows you to create up to 5 motion regions. 4 Full Screen Pop-Up on Sensor When a sensor i[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–4 5.3 MOTION, CONTINUED 6 Beep on Detect When motion is detected, an internal sp eaker on the DVR sounds an alarm. 7 Full Screen Pop-Up When motion is detected, the camera is displayed full screen. 8 Clear Clears all motion areas for the sel ected camera. 9 Post Alarm (MOTION) Record video [...]

SETUP OPTIONS 5–5 5.3 MOTION, CONTINUED 5.3.3 REGULAR INTERVAL RECORDING Motion To enable regular Interval Recording o n Motion follow these steps: 1. Setup a camera to record on motion. 2. Place a check in the Regular Interval Recording box. 3. Specify how often to take an image when no motion is occurri ng. You can go as little as 1 image per s[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–6 5.4 GENERAL SETUP 1 Voice Warning Provides an audible warnin g (.wav sound clip) when motion or sensors are activated. 2 Hide Network Connectivity Enables/Disables display of the Netwo rk Connectivity on the Main Display Screen. 3 Display Relay Output Status B ar Enables/Disables display [...]

SETUP OPTIONS 5–7 5.4 GENERAL SETUP, CONTINUED 8 Auto Sequencing Time (sec) When the Loop button is activated, the Auto Sequencing Time specifies the amou nt of time that elapses before switchin g to the next Screen Division group. 9 No Sequencing on 0 FPS Does not sequence through came ras that have 0 FPS specified. 10 Audio Opens the Audio enab[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–8 5.4 GENERAL SETUP, CONTINUED 5.4.2 INTENSIVE RECORDING OVERVIEW The Intensive Recording Option allows i ncr easing of the Pictures Per Second and the resolution of any camera recording usi ng sensor activation. When the intensive recording is activated, the resolution of t he remaining ca[...]

SETUP OPTIONS 5–9 5.4 GENERAL SETUP, CONTINUED 5.4.3 HOW TO USE INTENSIVE RECORDING The Intensive Recording option is set up as an ‘All or Nothing’. This means that once enabled (associated with sensors), all cameras that are associated with sensors will activate the Intensive Recording. To activate the Intensive Recording option, follow the [...]

FUSION DVR Digital Re cording and Transmission S ystem 5–10 5.4 GENERAL SETUP, CONTINUED 5.4.5 AUDIO RECORDING The Fusion DVR is capable of recordi ng up to 4 channels of audio. Audio Features: • 8000Hz playback in Live Mode • Audio input level should be 1Vp-p • Up to 48000Hz playback i n search mode • Mono Sampling • Line-In type (Requ[...]

SETUP OPTIONS 5–11 5.5 FRAME SETUP The Frame Setup menu gives the user the opt ion to adjust both the resolution and the number of images per second ea ch camera will record. NOTE: The Software will n ot allow the maximum available Frames to be exceeded. 2 1 3 4 5 6 7[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–12 5.5 FRAME SETUP, CONTINUED 1 Set Default Selecting this option resets all camera frames a nd resolutions to the default settings. 2 Camera Number The cameras are given different numbe rs to distinguish them when viewing the frame status. Adjust the recorded frames per se cond by sliding [...]

SETUP OPTIONS 5–13 5.6 RECORDING SCHEDULE Creating a customized Schedule is important to maximize the efficiency of the DVR. This DVR offers numerous options to allow for a wide variety of different need s and requirements. 5 6 7 4 3 2 1[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–14 5.6 RECORDING SCHEDULE, CONTINUED These schedules are created for the ge neral installation and have been predefined with basic configurations All set to Motion – All cameras are set to motion recording (24 hours/day, 7 days/week) All set to Continuous – All came ras are set to conti[...]

SETUP OPTIONS 5–15 5.6 RECORDING SCHEDULE, CONTINUED 5.6.1 DAY OF THE WEEK The Day of Week is simp ly the day of the week fo r which the schedule is being edited. If WED is checked, Wednesday’s sche dule is being edited. The Single Day Selection button allows selection of multiple days at once. By selecting the Single Day Selection button placi[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–16 5.6 RECORDING SCHEDULE, CONTINUED Steps 1-6: Schedule cameras 1-4 to record on MOTION from 9:00am-5:59 pm Monday through Friday. 1. Select Sch01 from the Schedule Number drop down list. (This should alrea dy be selected by default) 2. Select the Single Day Selection button, then sele ct [...]

SETUP OPTIONS 5–17 5.6 RECORDING SCHEDULE, CONTINUED Steps 7-11: Schedule cameras 1-4 to record on CONTI NUOUS from 6:00pm-8:59am Monday through Friday. 7. Select Sch02 from the Schedule Number drop down list. 8. On the Sch02 line again, highlight the hours 18-23 (for 6:00pm-m idnight) and press Set . 9. On the Sch02 line on time selector grid, h[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–18 5.6 RECORDING SCHEDULE, CONTINUED Steps 12-19: Schedule cameras 1-4 to record on MOTION from 12:00am-11:59pm Monday through Friday 12. Select the Multi-Day Selection button. 13. Place a check in the SAT days of the week box. 14. Select Sch03 from the Schedule Number drop down list. 15. S[...]

SETUP OPTIONS 5–19 5.6 RECORDING SCHEDULE, CONTINUED 5.6.3 SCHEDULING SENSORS AN D RELAYS (BY EXAMPLE) It is easy to add advanced recording functionality using Senso r Inputs and Relay Outputs. SENSOR - Sensor Inputs can b e programmed to instantly start one or more camera s recording when an alarm occurs. These alarm eve nts can also activate Re[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–20 5.6 RECORDING SCHEDULE, CONTINUED Steps 1-8: Schedule cameras 1 and 2 to be activated on Sensor # 3 and/ or Sensor #5 which will then activate Relay Output #7 and #13. 1. Select Sch01 from the Schedule Number drop down list. (This should already be se lected by default.) 2. Select the Si[...]

SETUP OPTIONS 5–21 5.6 RECORDING SCHEDULE, CONTINUED Steps 9-15: Schedule camera 3 to record using MOTION. When Motion occurs it will activate Relay Output #7 and #10. 9. Select Sch02 from the Schedule Number drop down list. 10. Select the Single Day Selection button, then sele ct Yes . 11. Place a check in the boxes for SUN , MON , TUE , WED , T[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–22 5.6 RECORDING SCHEDULE, CONTINUED Steps 16-22: Schedule Sensor #6 to activate Relay #8 w hen an Alarm occurs. NOTE - This will not cause any cameras to record. 16. Select Sch03 from the Schedule Number drop down list. 17. Select the Single Day Selection button, then sele ct Yes. 18. Plac[...]

SETUP OPTIONS 5–23 5.6 RECORDING SCHEDULE, CONTINUED 5.6.4 VERIFYING A RECORDING SCHEDULE 1. Select a single day of the week usi ng the selection check box to the left of the specified da y. 2. Next move down to the schedule grid. 3. Identify the schedule (or schedules) that have spe cific hours of the day high-lighted in light blue color. The ho[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–24 5.7 SENSOR SETUP The Sensor Window options enable, disabl e, and configure Sensors. 1 Sensor/Control Name Opens a menu to allow custom naming of controls and sensors for easy identification. 2 Sensor Displays the sensor number 3 Type Selects whether the Sensor will be Normally Open (NO) [...]

SETUP OPTIONS 5–25 5.8 NETWORK SETUP CAUTION : Do not join this DVR to a Network Domain. Domain s push across policies that can negatively a ffect the DVR. More importantly, by default, the user must press CTRL ALT DEL to login. This Keyboard combination is disabled and the softwar e will not be able to load. 1 6 2 3 4 5 7 8 12 9 10 11 13 14 15 1[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–26 5.8 NETWORK SETUP, CONTINUED 4 Center Port The Ce nter Port is the port used to connect to the Fusion Remote Software. This is the Port that must be specified inside the Fusion Remote software to connect to the DVR. If connecting through a firewall, this port must be opened to incomin g [...]

SETUP OPTIONS 5–27 5.9 ADMINISTRATION 1 2 3 4 5 7 10 6 8 9 1 Calendar Displays the days with Log information in a bold form at. 2 User Management Opens the User Management Window t o create, edit, and delete DVR user accounts. 3 Log Display Window Displays the Log Files of the selected d ay. 4 End Date Specifies a date to end the Log Export funct[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–28 5.9 ADMINISTRATION, CONTINUE D 5.9.1 USER MANAGEMENT The User Management Consol e has options for creating, editing, and deletin g user accounts. Each user account can b e assigned different privileges that limit their usage of the DVR system. Users can be given admin istrator privileges[...]

SETUP OPTIONS 5–29 5.9 ADMINISTRATION, CONTINUE D 5.9.2 USER RANK The User Ranking structu re allows the opti on to assign a privilege system (1-10 where one has the most rights) to users of the DVR. For example. Since only one user is allowed to use the PTZ controls at any one time, an administrator with a higher rank can kick another user out a[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–30 5.10 SITE INFORMATION 1 2 3 4 5 8 9 6 7 10 1 Decoder Displays decoder information. 2 Video Format Displays Video Format (NTSC/PAL) of the DVR. 3 DVR Server Version Displays the software version on the DVR. 4 Site Code A user-specified unique identification name that is used by other DVR [...]

SETUP OPTIONS 5–31 5.11 PTZ The PTZ Setup enables PTZ cameras, cre a tes Presets, Tours, and adjusts speed settings. Many options listed here are fe atures only available on selected cameras. Refer to the Advanced PTZ chapter in this manual for description on setting u p a PTZ camera and PTZ options. Please refer t o the section 7 for more inform[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–32 5.13 ADJ USTING THE TIME, DATE, AND TIME ZONE Exit to Windows by pressing the Exit button from the Main Display Screen and selecting Restart in Win dows Mode . (See Section 4.3 – Display Scre en.) 1. Open Windows Explorer by clicking on the My Computer icon (generally located at the to[...]

SETUP OPTIONS 5–33 5.14 CENTRAL USER M ANAGEMENT (OPTIONAL) The Fusion DVRs are capable of utilizing a Central User Management system. This option allows, from one location, the creation, deletio n and management of user accounts on multiple DVRs. This make s managing a large amount of DVRs easy and organized. The Central User Manage ment program[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–34 5.14 CENTRAL USER M ANAGEMENT, CONTINUED Site Management This option will Add/Delete DV Rs that are managed b y the Central User Management Software. User Management This optio n will Add/Delete/Modify User Acco unts and User access privile ges. Log In Only the Administrator can modify s[...]

SETUP OPTIONS 5–35 5.14 CENTRAL USER M ANAGEMENT, CONTINUED 5.14.1 SITE MANAGEMENT The Site Management window is where DVRs are added and deleted from the managed list. 1 IP Entry Field Used when adding a new DVR. This field accepts standard IP addresse s. 2 Site List Display the current DVRs being managed by the Central User Management Software.[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–36 5.14 CENTRAL USER M ANAGEMENT, CONTINUED 5.14.2 USER MANAGEMENT The User Management options a re where the User Privileges are specified. The User Management Consol e has the ability to create, edit, and delete user accounts. Each user account can b e assigned different privileges that l[...]

SETUP OPTIONS 5–37 5.14 CENTRAL USER M ANAGEMENT, CONTINUED 5.14.3 SELECT SITE This option defines the DVRs to which the User has access. To select a Site simply click on it. It will become highlighted. Select the Site again to deselect it. 5.14.4 SETTING UP THE CENTRAL MANAGE MENT USER SERVER To set up a Central Management Us er Server follow th[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–38 5.14 CENTRAL USER M ANAGEMENT, CONTINUED 5.14.5 ENABLING A DVR TO USE CENTRAL USER MANA GEMENT To enable a DVR to use the Central User Managem ent software follow these steps 1. Select the button from the User Management Window. 2. Place a Check in the Enable User Central Management box.[...]

SETUP OPTIONS 5–39 5.15 TV OUTPUT CONTROL SET UP (OPTIONAL), CONTINUED 1 2 4 5 3 6 1 Use Enables the selected Port. 2 Port Refers to the output channel. The Ports use RCA jacks. 3 Cameras The camera buttons allow selection of cameras to sequence on the selected Port. 4 Motion/Sensor Event This option allows immediat e output of a Motion or Sensor[...]

FUSION DVR Digital Re cording and Transmission S ystem 5–40 5.15 TV OUTPUT CONTROL SET UP (OPTIONAL), CONTINUED 5.15.1 CUSTOMIZING THE TV OUTPUTS To set up the TV OUTPUT CONTROLS follow these steps. 1. Select the TV OUT button fr om the General tab inside setup. 2. Select a Port (one of the 4 available out put channels) to modify by selecting a P[...]

6–1 SECTION 6 SEARCH OPTIONS 6.1 SEARCH OVERVIEW The DVR unit has several option s that allow easy searching to find a particular section of video. From Motion and Sensor indexing to cale ndar views showing whi ch days have recorded video, the DVR unit is equipp ed to quickly find what you’re seeking. 4 5 9 1 4 1 5 8 3 2 1 7 6 1 2 1 3 1 1 1 0 1[...]

FUSION DVR Digital Re cording and Transmission S ystem 6–2 6.1 SEARCH OVERVIE W, CONTINUE D 3 After Image Removal Often times, extensive motion can create a ‘digital blur’ that can interfere with the quality of an image. By selecting the Clean Image option, two frames are interwoven to create a smooth, detailed image. This option only pertain[...]

SEARCH OPTIONS 6–3 6.2 PLAY CONTROLS The Play Controls give the ability to play the video Frame by Frame, Normal Speed, and Reverse. 1 4 5 2 3 1 Play Reverse Plays the video at normal speed in reverse. 2 Play (Normal Speed) Plays the video at normal speed 3 Play (Frame by Frame) Plays the video one frame at a time. Each time the button is pressed[...]

FUSION DVR Digital Re cording and Transmission S ystem 6–4 6.4 BRIGHTNESS / SPEED / ZOOM The Brightness and Zoom feature s can get the most out of the images. Adjusting Brightness can brighten up an image to get more detail. Zoom can not only bring the image up full screen but also Zoom into a particular area of the image. 3 1 2 1 Slow / Fast Inc[...]

SEARCH OPTIONS 6–5 6.5 AFTER IMAGE REMOVAL The DVR unit is capable of recording video usi ng one of three different resolutions. When using the 720 x 480 resolution, two fiel ds are mixed. Becau se of the timing gap between the two fields, according to the standardi zed image rules, after image might occur to high speed moving images. Th e Fusion[...]

FUSION DVR Digital Re cording and Transmission S ystem 6–6 6.6 SEARCH OPTIONS OVERVIEW The Search Options allows the user to find the requested imag es quickly, enhance the image quality, and export the video or images in a numbe r of ways. Index Search: Used to perform a search based on Moti on detection and Sensor activation. Allows for quickly[...]

SEARCH OPTIONS 6–7 6.8 DAYLIGHT SAVINGS TIME The DVR automatically adjusts fo r Daylight Savings Time changes. When the hou r “jumps forward” no video is lost because a n hour is simply skipped. However when the hour “falls back” there is a duplicated hour that und er normal circumstance s would be recorded over. The Honeywell Fusion DVR [...]

FUSION DVR Digital Re cording and Transmission S ystem 6–8 6.10 PRINTING AN IMAGE The DVR can print a re corded image to a local or network printer. 1. From the Search screen, stop on the image to print. Double -click the image. NOTE: Only one camera can be selected at a time for this function to work. 2. Click on the Print button. A Print Option[...]

SEARCH OPTIONS 6–9 6.11 SAVE TO FUNCTION, CONTINUED 1 Export Ty pe Selects method used for export. 2 AVI Duration Enter duration (in seconds) for re cording the AVI file. Although 100 is the longest displayed, a manual time may be entered. 3 Image Quality It may be necessary to reduce the overall size of an AVI file; for example, to email to some[...]

FUSION DVR Digital Re cording and Transmission S ystem 6–10 6.12 INDEX SEARCH Using the Index Search ca n greatly decrease the amo unt of time spent searching through saved video. The Index Search allows a user to perform a sea rch based on criteria such as Sensor, Motion and Instant Record events. 1 Select All Cameras This option selects all cam[...]

SEARCH OPTIONS 6–11 6.12 INDEX SEARCH, CONTINUED 1 2 3 4 5 1 Image Display Area Where Search results images are displ ayed. 2 Time Time of the res ult. 3 Camera Number Camera number of the ret urned result. 4 Type Displays event type: M – Motion S – Sensor IR – Instant Record 5 Search Results Displays the results of the search. Each line re[...]

FUSION DVR Digital Re cording and Transmission S ystem 6–12 6.13 PREVIEW SEARCH The Preview Search can be used in a numb er of circumstances to quickly find an exact moment where an event, such as a theft, occu rred. The Preview Sear ch bas ically gives a 24 Hour visual overview of a single camera by separating a 24 ho ur period (1 day) into 24 i[...]

SEARCH OPTIONS 6–13 6.13 PRE VIEW SEARCH, CONTINUED 6.13.1 PERFORMING A PREVIEW SEARCH 1. Select a single camera, either by turning off all cameras but one or by double- clicking a displayed image. 2. Select the Preview Search button. 24 images display. If there is no recorded video during a po rtion of the day, “No Image” will be displayed w[...]

FUSION DVR Digital Re cording and Transmission S ystem 6–14 6.14 OBJECT SEARCH Object Search is a powerful Search utility that is used to search a region on the video for any motion changes. The Result s are neatly displayed and can be viewed quickly. 1 Sear ch Results Search results are displaye d in this column and listed by date and time. When[...]

SEARCH OPTIONS 6–15 6.14 OBJECT S EARCH, CONTINUED 1 Start Displays the time and date of the initial key frame. 2 Sensitivity Used to control sensitivity of the motion to be detected. Poor lighting conditions ca n often be interpreted as motion; the sensitivity setting can compensate for this. 3 Key Frame Search Searches by key frame. 4 Show Dete[...]

FUSION DVR Digital Re cording and Transmission S ystem 6–16 6.14 OBJECT S EARCH, CONTINUED 6. Adjust the sensitivity if necessary. 7. Click OK to begin the search. When results are found, they will be displayed in the column to the right. If no results are found, the search will end a nd “No Images Found” will display in the column. Press Sto[...]

SEARCH OPTIONS 6–17 6.15 STAT US SEARCH, CONTINUED 1 2 3 1 Camera Displays the cameras in linear format. Scroll down using the scroll bar on the ri ght. 2 Hours The hours 0-23 (24 hours) are listed. 3 Recording Block Displays in blue where video is re corded. Areas of no recording are displayed in white. 6.15.1 PERFORMING A STATUS SEARCH 1. Selec[...]

FUSION DVR Digital Re cording and Transmission S ystem 6–18 6.17 POINT OF SALE (OPTIONAL) The Point of Sale search is an optional component that can be added to the Fusion DVR. When installed and activated, a PO S button will appear insi de the Search Window. The POS functionality utilizes TVS technology . When performing a POS search, a TVS wind[...]

7–1 SECTION 7 PAN / TILT / ZOOM 7.1 PAN / TILT / ZOOM OVERVIEW The PTZ controls within the DVR unit allow for powerful control ove r the cameras. This can be extremely beneficial by increasing the usefulne ss of the recorded video. Use the PTZ controls to creat e custom pre set configuratio ns that can continuously sweep across large areas. 7.2 S[...]

FUSION DVR Digital Re cording and Transmission S ystem 7–2 7.2 SETTING UP A P TZ CAMERA, CONTINUED 7. Once enabled, the Protocol can be edited. Select the appropriate Protocol. NOTE: Protocols are a set of instructions written by the manufacture of the PTZ cameras that allow softwar e programs such as this DVR to control their functions. The majo[...]

PAN / TILT / ZOOM 7–3 7.2 SETTING UP A P TZ CAMERA, CONTINUED 7.2.1 SUPPORTED PROTOCOLS Protocols are added fre quently. The supported list may contain ne w protocols that are not listed here. The current suppo rted protocols are: Ademco Rapid Dome KDC American Dynamics LG (LVC-A70x's) CBC (GANZ) LG SD-110 C-BEL LG (LPT-A100L) Chiper CPT (V9[...]

FUSION DVR Digital Re cording and Transmission S ystem 7–4 7.3 ADVANCED PTZ SETUP 1 2 4 2 3 5 6 7 1 8 9 10 11 12 h[...]

PAN / TILT / ZOOM 7–5 7.3 ADVANCED PTZ SETUP, CONTINUED 1 Camera Menu Opens the OSD PTZ camera me nu. 2 On-Screen Compass Allows On-Screen cont rol of a PTZ camera. 3 RS-232 / RS-485 Defines how to send the PTZ signal to the cam era. 4 Select Camera Selects the current camera to be edited. 5 Port Settings Defines the specific settings to transmit[...]

FUSION DVR Digital Re cording and Transmission S ystem 7–6 7.4 CREATING AND VIEWING PRESET POSITIONS A Preset Position is a user-defined locati on where the camera can be pointed, zoomed in, and focused. Preset positions can be defined and labeled if the camera supp orts this. Each preset can have an independ ent Dwell and Speed setting for use w[...]

PAN / TILT / ZOOM 7–7 7.4 CREATING AND VIEWING PRESET POSITIONS, CONTINUED 6. A window will open for entering a Preset Name. Enter a name and press OK . 7.4.2 VIEWING A PRESET 1. From the Main Display Screen, click on the PTZ camera to sele ct it. 2. Using the keyboard, press the numbe r ke ys corresponding with the Preset positions. The camera w[...]

FUSION DVR Digital Re cording and Transmission S ystem 7–8 7.5 UNDERSTANDING TOURS, CONTINUED 1 Tour Method These options define the type of Tour to use. Preset Tour The Preset Tour cycles through recorde d Presets. For Ex. If Presets 1,2,4,6 and 9 are defined, then the Tour wil l cycle as such... 1,2,4,6,9,1,2,4,6,9,1,2...etc. The default cycle [...]

PAN / TILT / ZOOM 7–9 7.5 UNDERSTANDING TOURS, CONTINUED 7.5.1 CREATING A PRESET TOUR 1. Start by creating two or more Pre s et Positions. (refer to Section 7.4.1) 2. Select the Preset Tour Method. The Preset Tour is now the default Tour method. 3. The Tour is now set to cycle through the defined presets. 7.5.2 VIEWING THE PRESET TOUR 1. From the[...]

FUSION DVR Digital Re cording and Transmission S ystem 7–10 7.5 UNDERSTANDING TOURS, CONTINUED 7.5.5 CREATING A MIMIC TOUR 1. Select the Mimic Tour Method. 2. Press the Start Position button. 3. Using the PTZ Controller, move the PTZ in the path of the tour to mimic. 4. Press the Stop Position button when finished moving the PTZ around. 5. Press [...]

PAN / TILT / ZOOM 7–11 7.6 PTZ STATUS ON CLOSE The PTZ Sta tus on Close is an option that defines the default settings for a PTZ camera when the controller is not open. This includes activating a Tour, moving to a preset position or simply leaving the camera a s it. Stay Put This option leaves the PTZ in its present state. Start Tour Starts the P[...]

FUSION DVR Digital Re cording and Transmission S ystem 7–12 7.7 PTZ ADDRESS SETTING Some protocols support software address settings. The following section expl ains these settings. RX Address 1 This option was added for a particular line of receivers that support 2 ID addresses. This is the first RX address. RX Address 2 This option was added fo[...]

PAN / TILT / ZOOM 7–13 7.8 ACCESSING PTZ MENU’s Some protocols support the ability to access the Internal PTZ Onscreen Menu. Camera Menu This option opens the PTZ Camera menu. Select This option selects an item on the On screen menu. Close This option closes the PTZ Onscreen m enu. Up/down The Up and Down buttons on the PTZ controller mov e thr[...]

FUSION DVR Digital Re cording and Transmission S ystem 7–14 7.9 USING THE ON-SCREEN CONTROLLER AND COMPASS The Fusion DVRs provide control for the PAN/TILT camera in two different ways. 1. Using the Graphical PTZ controller that appears whe n the PTZ button is pressed on the main screen. 2. Clicking on the video itself. This second option is a m [...]

PAN / TILT / ZOOM 7–15 7.9 USING THE ON-SCREEN CONT ROLLER AND COMPASS, CONTINUED 7.9.1 THE PTZ CONTROLLER 3 2 1 6 5 4 7 10 9 8 11 1 Direction Controls There are 8 directions buttons that move the PTZ. NOTE: Only 4 of the buttons work for all protocols (UP, DOWN, LEFT, RIGHT). 8 Directions are available only for select protocol s. 2 Zoom This opt[...]

FUSION DVR Digital Re cording and Transmission S ystem 7–16 7.9 USING THE ON-SCREEN CONT ROLLER AND COMPASS, CONTINUED 7.9.2 AUX BUTTONS The AUX buttons activate different options for each protocol. The p rotocols and their options are defined below. AUX 1 Auto Iris VCL, Ademco Rapid Dome, Javelin (Orbitor), KD6 AUX 2 Auto Focus AUX 1 Wiper Pelco[...]

8–1 SECTION 8 BACKING UP TO A CD-R DRIVE 8.1 BACKUP OVERVIEW The DVR unit can ea sily backup important video to an internal or external media location. The most commonly used are CD-R W drives and Hard Drives. Since the DVR unit comes standard eq uipped with a CD-RW drive, this section covers ba cking up using the CD-RW drive as well as by using [...]

FUSION DVR Digital Re cording and Transmission S ystem 8–2 8.2 DIRECTCD FORMAT UTILITY, CONTINUED 1 Windows Control Buttons Calls the Help screen. Minimizes the window Closes the DirectCD appli cation 2 CD Select Use the drop down box to choose the CD-RW drive attached to the DVR. Generally, this defaults to the correct CD-RW drive. 3 CD Utilitie[...]

BACKING UP TO A CD-R DRIVE 8–3 8.3 FORMATTING A CDR OR CD-RW DISC We strongly recommen d using CDR discs rather than CD-RW discs. CD-RW discs can take up to 30 minutes or more to format and may have compatibility issues. 1. Insert a blank CDR or CD-RW disc into the CD-RW drive. 2. Enter Backup and click th e button. 3. Press the button. The CD be[...]

FUSION DVR Digital Re cording and Transmission S ystem 8–4 3 Format CD Opens the CD formatting Utilit y (see the Formatting a CD-R or CD-RW section in this chapter). 4 Quick Format IEEE (1394) Performs a quick format of the attached IEEE (1394) device. 5 Start Backup Once the location and video have been selected, this button begins the backup pr[...]

BACKING UP TO A CD-R DRIVE 8–5 8.4 GENERAL BACKUP OPTIONS OVERVIEW, CONTINUED 10 Select Backup Media Displays available storage drives. Use this windo w to select the drive you wish to save video files to. 11 BV Copy Copies the proprietary viewer onto the CD-R and makes the CD autoplay. 12 Fixed HDD By checking this box, all available hard drives[...]

FUSION DVR Digital Re cording and Transmission S ystem 8–6 8.5 SCHEDULED BACKUP OPTIONS OVERVIEW The SCHEDULED BACKUP OPTIONS window a llows the creation of a scheduled daily backup of selected times to a specified storage location. NOTE: Available storage locations exclu de CD-R and CD-RWs and are limited to hard disks specifically identified as[...]

BACKING UP TO A CD-R DRIVE 8–7 8.6 SPECIFYING SCHEDUL ED BACKUP DRIVES In order to use the Scheduled Backup fe ature one or more storage drives o r partitions connected to the DVR must be labeled as a backup drive. 1. Exit and restart in Windows mode. 2. Double click the My Computer icon on the DVRs desktop. A file menu will be displayed. 3. Righ[...]

FUSION DVR Digital Re cording and Transmission S ystem 8–8 8.8 BACKING UP TO A CD-RW DRIVE OR HARD DRIVE 1. From the Main Display Screen select the BACKUP button. The Backup Options window display s . 2. From the Backup Options wind ow, use the calendar to select a dat e. 3. Select the time(s) to backup by clicking on the desired blocks. The bloc[...]

BACKING UP TO A CD-R DRIVE 8–9 8.9 REMOVING THE DISC FROM THE CD-RW DRIVE 6. Press the Open button on the CD-RW drive. The Eject CD Win dow should appear on the screen. 7. Select the Leave As Is option to continue usin g the CD for future backups by the DVR unit. The disk may not be able to read in other CD-ROM drives if this is selected. Select [...]

FUSION DVR Digital Re cording and Transmission S ystem 8–10 NOTES:[...]

9–1 SECTION 9 LAN / ISDN / PSTN CONNECTIONS 9.1 LAN OVERVIEW The DVR unit can ea sily be connected to a Local Area Netwo rk (LAN) and uses Microsoft’s® powerful and secure Windo ws® 2000 operating system. This allows for easy and well-documented instructions on setting up LAN con nections no matter what type of LAN you want to use. A LAN is a[...]

FUSION DVR Digital Re cording and Transmission S ystem 9–2 4. Select the Internet Protocol (TCP/IP) by clicking on it once. Once it is highlighted, select the Properties button. The Internet Protocol (TCP/IP) Properties wind ow opens. 5. Select Use the Following IP Addres s option. Enter the IP Address and Subnet mask appropriate for your network[...]

10–1 SECTION 10 Digital Signature Verifier 10.1 DIGITAL VERIFIER JPG images and AVI video files that are ex ported from the Digital Video Recorder are automatically embedded with a Digital Signature. Digit al Signatures are a way to verify the authenticity of the images to ensure that they have not been tampere d with or edited in any way. Includ[...]

FUSION DVR Digital Re cording and Transmission S ystem 10–2 10.2 INSTALLATION, CONTINUED 3. When the Setup Complete window appears select Finish . Setup is now complete. 10.3 USING THE Digital Verifier 1. Open the Digital Signature verification progra m by selecting Start Æ Programs Æ FUS ION Æ Digital Signature Verifier Æ Digital Signature V[...]

Digital Signature Verifier 10–3 10.3 USING THE DIGITAL VERIFIER, CONTINUED 2. Select the Bro wse button to load the JPG or AVI file. 3. Enter the Site Code of the DVR unit that the image was originally ex tracted from. 4. Click the Verify button to continue or Close to clo se the window without verifying. If the image has not been tampered with, [...]

FUSION DVR Digital Re cording and Transmission S ystem 10–4 10.3 USING THE DIGITAL VERIFIER, CONTINUED[...]

11–1 SECTION 11 PROPRIETARY VIEWER 11.1 PROPRIET ARY VIEWER OVERVIEW The Proprietary Viewer play s back the exported video in its proprietary format. Video saved in this format is extremely difficult to tamper with and therefore is the ideal solution when law enforcement and leg al departments are involved. This video cannot be read by any other [...]

FUSION DVR Digital Re cording and Transmission S ystem 11–2 11.2 INSTALLI NG THE PROPRIETARY VIEWER 1. Insert the Software Installation CD into the CD-ROM. (Do not install on the DVR unit.) 2. Select the Proprietary Viewer option to begin installation. When the Welcome screen appears, se lect Next . 3. When the Choose Destination Locati on window[...]

PROPRIETARY VIEWER 11–3 11.2 INSTALLING THE PROPRIETARY VIEWER, CONTINUE D 4. When the Select Program Folder window appears select Ne xt . 5. Select either 16 or 32 channel option dependi ng on the Model you have. You can always reinstall and cha nge this option at a later date. Press Next . 11.2 INSTALLING THE PROPRIETARY VIEWER, CONTINUE D If y[...]

FUSION DVR Digital Re cording and Transmission S ystem 11–4 option. Otherwise select the NO option. Press Next . 6. When this window appears sel ect Finish . Setup is now complete.[...]

PROPRIETARY VIEWER 11–5 11.3 LOADING VIDE0 FR OM CD-ROM OR HARD DRIVE 1. Open the Proprietary Viewer program by selecting Start Æ Programs Æ DVR Æ Proprietary Viewer Æ Proprietary Viewer . 2. Select Backup Search (see Section 6.7 – Performing a Basic Search) and the Choose time to Search window opens. 3. For CD-ROM data, select the appropri[...]

FUSION DVR Digital Re cording and Transmission S ystem 11–6 NOTES:[...]

12–1 SECTION 12 ALARM MONITOR 12.1 ALARM MONITOR OVERVIEW The Alarm Monitor software is a utility that streams video across a Local Area Network to a Client PC when an alarm is detected on the DVR unit. The video that streams across can be stopped, played forwards and backwards, in slow motion or real speed. The utility is loaded at startup and p[...]

FUSION DVR Digital Re cording and Transmission S ystem 12–2 12.2 INSTALLING THE ALARM MONITOR, CONTINUED 4 When the SETUP COMPLETE window appears click FINISH. 12.3 CONFIGURING THE DVR To enable the Alarm Monitor on the DV R follow these steps: 1. Enter SETUP and click the Recording Schedule tab. 2. Assig n the desired sensors to the des ired cam[...]

ALARM MONITO R 12–3 12.4 CONFIGURING THE CLIENT P C All configuration takes place in the Al arm Monitor Window on the Client PC for descriptions and locations of the buttons and f eature s of the Alarm Monitor window Refer to the Alarm Monitor Window section later in this cha pter. 1 Open the Alarm Monitor windo w on the Client PC. Start >Prog[...]

FUSION DVR Digital Re cording and Transmission S ystem 12–4 12.5 ALARM MONITOR WINDOW 1 Tools Menu Opens the Setup (Configuration) wi ndow and Opens or Closes the Event List. 2 Zoom Zoom in or out of the displayed video or reset to default. 3 Video Display Displays the Video feed coming from the DVR. 4 DVR List Lists all DVR units you have connec[...]

ALARM MONITO R 12–5 12.5 ALARM MONITOR WINDOW, CONTINUED 13 Event Filter Filters Events based on the Alarm Status assigned to them. Click a filter to show or hide the asso ciated events. Right click an event to assign it an Alarm Status. 14 Event List Item Individual Event in Event List. Double-Clicki ng on an event opens the associated video in [...]

FUSION DVR Digital Re cording and Transmission S ystem 12–6 12.6 SEARCH ALARM WINDOW 1 Comment Provides space for user to add comments to video events. 2 AVI File Whe n selected a video clip exported whe n Export is clicked. 3 Export Quality It may be necessary to reduce the overall size of an AVI file; for example, to email to someone. AVI file [...]

ALARM MONITO R 12–7 12.6 SEARCH ALARM WI NDOW, CONTINUE D 12 Digital Signature Adds a digital signature to the exported JPG image for use with the Digital Signature Verifier to verify integrity of exported images and prevent tampering . 13 JPG File When selected a JPG image is exported whe n Export is clicked. 12.7 CONFIGURATION WINDOW 1 General [...]

FUSION DVR Digital Re cording and Transmission S ystem 12–8 NOTES:[...]

13–1 SECTION 13 REMOTE SOFTWARE 13.1 FUSION REMOTE SOFTWARE OVERVIEW The DVR unit was specifically designed to be fully operated and m aintained remotely. It connects using the standard T CP/IP prot ocol thorough connection types such as DSL, Cable Modem, T1, ISDN, 56K Modem, LAN, and more. The Fusio n Remote software provides for viewing live vi[...]

FUSION DVR Digital Re cording and Transmission S ystem 13–2 13.1 FUSION REMOTE SOFTWARE OVERVIEW, CONTINUED 13.1.1 REMOTE CLIENT MINIMUM REQUIREMENTS • Pentium 233 or equivalent • 32MB System Memory • DirectX 8 or higher • Compatible video card (ATI Preferable) • Internet or LAN Connection (56K, DSL, Cable Modem, T1, ISDN, etc.) • TCP[...]

REMOTE SOFTWARE 13–3 13.2 SETTING UP THE S ERVER TO ACCEPT INCOMING CONNECTIONS In order to access the DVR unit remotely, the DVR Server must be setup to allow remote connections. 1 2 3 4 5 1 Disable Remote Control Enables/Disables accepta nce of remote connections by the DVR server. 2 Time Out Value Specifies a value (in seconds) to wait for a s[...]

FUSION DVR Digital Re cording and Transmission S ystem 13–4 13.3 SETTING UP THE FUSION REMOTE SOFTWARE 13.3.1 INSTALLING THE FUSION REMOTE SOFTWARE 1. On the Client computer, insert the Honeywell Fu sion Software CD into the CD-ROM. The CD should play automati cally. 2. When prompted, sele ct the Inst all Fusion Remote Software option. Follow the[...]

REMOTE SOFTWARE 13–5 13.3 SETTING UP THE FUSION REMOTE SOFTWARE, CONTINUED 2. Press New to open the Site Detail Information window. 3. Enter the Site Code and Site Name . The Site Code will be the name displayed inside the connection box to help identif y the unit. 4. Enter the IP Address of the DVR server. By default the DVR unit is set to conne[...]

FUSION DVR Digital Re cording and Transmission S ystem 13–6 NOTES:[...]

14–1 SECTION 14 THE WEB VIEWER 14.1 WEB VIEWER OVERVIEW The DVR unit allows access to the video us ing Microsoft® Internet Explorer® Browser 5.5 and later Highlights: • View Live Video from most computers • Username and Password p rotected • Easy to use graphical interface Basics: 75 users can access the Web DVR simultaneously. The Web DV[...]

FUSION DVR Digital Re cording and Transmission S ystem 14–2 14.1 WEB VIEWER O VERVIEW, CONTINUED 1 Screen Division Buttons Allows view of one or more sets of ca meras at a time. They are organized in several different groups su ch as 1x1, 4x4, and 8x8. 2 GO! Activates the commands 3 Camera Buttons Enable or disable selected cameras for use when s[...]

THE WEB VIEWER 14–3 14.1 WEB VIEWER O VERVIEW, CONTINUED 6. A login window will appear. Enter a Username and Password that is authorized to access the D VR. 7. The cameras will now be displayed. 14.1.3 CLOSING THE WEB VIEWER 1. To exit the Web Viewer si mply close Internet Explorer®.[...]

FUSION DVR Digital Re cording and Transmission S ystem 14–4 NOTES:[...]

15–1 SECTION 15 TECHNICAL SPECIFICATIONS 15.1 HFDV R FUSION 8-CHANNEL NTSC PAL CPU Intel® Pentium® 4 2.0+ GHz Storage (Hard Drive) 120 GB Standard / Virtually Unlimited Storage Potential Storage MAX Up to 6HDD with CD-RW Operating System Microsoft® Windows® 2000 Viewing Rate Max 480 FPS Max 480 FPS Recording Rate (240 IPS) Max 240 FPS Max 200[...]

FUSION DVR Digital Re cording and Transmission S ystem 15–2 15.2 HFDV R FUSION 16-CHANNEL NTSC PAL CPU Intel® Pentium® 4 2.0+ GHz Storage (Hard Drive) 120 GB Standard / Virtually Unlimited Storage Potential Storage MAX Up to 6 HDD with CD-RW Operating System Microsoft® Windows® 2000 Viewing Rate Max 480 FPS Max 480 FPS Recording Rate (240 IPS[...]

TECHNICAL SPECIFICATIONS 15–3 15.3 HFDV R FUSION 32-CHANNEL NTSC PAL CPU Intel® Pentium® 4 2.0+ GHz Storage (Hard Drive) 120 GB Standard / Virtually Unlimited Storage Potential Storage MAX Up to 6 HDD with CD-RW Operating System Microsoft® Windows® 2000 Viewing Rate Max 480 FPS Max 480 FPS Recording Rate (240 IPS) Max 240 FPS Max 200 FPS Reco[...]

[...]

[...]

[...]

[...]

[...]

[...]

Honey well Video Systems 171 Eileen Way Syosset, NY 11791, USA www.honeywellvideo.com TEL+1–516–921–6704 Toll-free TEL for North America: 1-800-796-CCTV Honey w ell Security Australia Pty Ltd. Unit 5, Riverside Centre, 24–28 River Road West Parramatta, NSW 2150, Australia www.ademco.com.au TEL +61–2–8837–9300 Honey well Video Systems [...]