Hoover HEH 604 инструкция обслуживания

1 41011516 INSTRUCTIONS FOR USE AND INST ALLA TION Electric Hob HEH 604[...]

2 UNP ACKING OF THE APPLIANCE Inside the appliance you will find a plastic bag containing the fixing brackets required for installing the hob in the worktop. TO GET THE BEST FROM YOUR APPLIANCE, PLEASE READ THE FOLLOWING CAREFULL Y . Please keep the operating and installation instructions in a safe place for future reference. Before fixing the hob,[...]

3 INSTALLATION Installing a domestic appliance can be a complicated operation which, if not carried out correctly , can seriously affect consumer safety . It is for this reason that the task should be undertaken by a professionally qualified person who will carry it out in accordance with the technical regulations in force. In the event that this a[...]

4 Fixing bracket 560 mm 480 mm 30 mm Opening 10x10 cm Building-in according to TYPE Y (Norm EN 335-2-6) The body of the hob is fitted with 4 location holes to take the fixing brackets that secure the intended to fix the hob in the unit. Place the 4 fixing bars in such a way that the hob surface is placed perfectly in the support unit. Location for [...]

5 INST ALLA TION: "ELECTRICAL CONNECTION" The mains electricity supply connected to the appliance should comply with the norms in force in the country of installation. HOOVER declines all responsibility for any damage that may be caused by unsuitable or unreasonable use. • Any queries regarding the power supply cord should be referred t[...]

6 2 - Operations to be carried out to make a new connection: . Choose the supply cord in accordance with the recommendations in the table on next page. . The hob must be in situation as shown : Earth Terminal . Pass the supply cord into the clamp. . Strip the end of each conductor of the supply cord on a 10 mm length, by taking in account the reque[...]

7 n i g i r o f o n o i t c e n n o C e s a h p e l g n i S ~ V 0 4 2 - 0 2 2 e s a h p o w T ~ 2 V 0 4 2 - 0 2 2 e s a h p e e r h T ~ 3 V 0 4 2 - 0 2 2 e s a h p e e r h T 5 1 4 - 0 8 3 ~ N 3 V E S U F A 0 2 A 0 2A 0 2A 6 1 E L B A C e p y T F - R R 5 0 H F - R R 5 0 HF - R R 5 0 H F - V V 5 0 H F - R R 5 0 H F - V V 5 0 H a r e A ² m m 5 , 2 G [...]

8 Overall dimensions (cm): Width : 59 Depth : 51 Building-in dimensions (cm) - (see chapter "Installation") Width : 56 Depth : 48 Total electrical power: 6 kW In order to improve the quality of the products, HOOVER may carry out modifica- tions linked to technical improvements. Appliance meeting with the standard CEE 89/336, and 73/23. PR[...]

9 THE HOT PLA TE THE STANDARD ELECTRICAL HOT PLATE This is a cast-iron hot plate, controlled by a 7 positions commutator. Each position corresponds to a permanent and progressive tempe- rature according to the marks 1, 2, 3, 4, 5 and 6. RAPID SELF-PROTECTING ELECTRIC HOT PLATE (with a red dot in the centre) This a cast-iron hot plate, controlled by[...]

10 Cooking with the electric hot plate To gest the best results from your appliance it is important to observe the following: • Use thick, flat-bottomed cooking vessels, a completely flat bottom prevents the overheating of some points which cause food to stick. Thick metal allows for good heat distribution. • Make sure that the bottoms of pans [...]

11 MAINTENANCE Before all cleaning or dismantling operation, it is imperative to: . disconnect the hob to the mains supply. . let all parts of the hob cool down. Never use: . harsh abrasives, scouring pads or sharp object to clean the hob. • GENERAL MAINTENANCE THE HOB Simply clean the surface using non-abrasive products. If you clean the surface[...]