Hoover WindTunnel Upright Bag Vacuum Cleaner инструкция обслуживания

W indTunnel ™ by HOOVER Congratulations on your purchase! This WindTunnel ™ vacuum cleaner takes HOOVER ® Type “Y” Allergen Filtration filter bags This product was designed for easy Assembly (See page 3) www.hoover.com[...]

Fill in and retain The model and serial number are located on the bottom of the cleaner as shown. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information. Your cleaner is model___________________________________ and has serial number___________________________________ It is sug[...]

3 STEP 1 Attach rack and handle Carton contents Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing. A. Handle section B. Cleaner body C. Hose rac k D . Hose, cleaning tools and wands E. Handle bolts and nuts packet (in bag with owner ’ s manual) F . P owered hand tool A A B C D E[...]

Align end of hose with projections (A) over slots (B) in dirt duct. STEP II Attach hose 1-8 1-11 1-13 1-9 1-10 Place nuts in recessed areas on front of handle. Hold each nut in place while tightening each bolt securely with a Phillips screw driver. Reposition bag door by fitting tabs on bottom of door into opening. Press top of door to snap securel[...]

2. How to use Cleaner description 15.Furniture guard: helps prevent cleaner from mark ing furniture. 16.Nozzle control knob: slide knob to cor rect setting for height of carpet being cleaned. 17.Headlight 18.Embedded Dirt FIND- ER TM sensitivity switch 19.‘Dirt FINDER’ display 20. Check bag indicator 21.Stair cleaning handle: located below lowe[...]

Carpet height adjustment The cleaning of carpet and rugs takes place at the nozzle (A). When it is necessary to raise and lower the nozzle for various carpet pile heights, slide the nozzle control knob (B) to the desired setting. 2 - 9 Settings For maximum cleaning performance, the following carpet height settings ar e r ecommended: • Lowest sett[...]

7 Cleaning lightweight flexible rugs Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle (front of cleaner) as shown and will prevent rug from clinging to cleaner. Continue to lift up nozzle so that when you have r eached the edge, it is completely off the r ug. [...]

3 - 1 8 2 - 1 6 Attach wand and tools Attach tool or wand to the hose (C). Attach second wand or tool to wand (D) by pushing it firmly onto the wand. T wist wand or tool slightly to tighten or loosen the connection. Where to buy Filter bags may be purchased from your Authorized Hoover Dealer (Depot), Leading Retailers, Hoover Factor y Service Cente[...]

Cleaning final filter The final filter assists in the filtration process to return clean air to the room. T o remove this filter when it becomes dirty, open the door on the side of the cleaner . Lift out filter (B) and hand wash it in cold water with mild detergent. Let filter air dry and reposition it on the side of the cleaner. Make sure the gree[...]

Securing agitator Grasp agitator firmly and fit it into posi - tion by first sliding end opposite the belt into the rectangular slot (F) on side of cleaner . Pull other side of agitator (G) into place. T urn agitator making sure belt is not pinched between agitator and agitator shield. A B C D F G E B D 3 - 7 Removing lens Disconnect cleaner from e[...]

How to replace Disconnect cleaner from electrical outlet. Remove bottom plate, belt and agitator following directions in “The belt” section beginning with Fig. 3-10. Discard old agitator . Continue following the directions in “The belt” section to reposition belt, new agi - tator and bottom plate. 11 Replacing bottom plate Reposition bottom[...]

12 7. Replace belt guard (B) making sur e not to pinch brush bristles in guard. Tur n agitator making sure it rotates freely. Replace and tighten screws. 8. To replace bottom plate (A), insert the four tabs on edge of bottom plate into slots on front of tool. Pivot bottom plate down and snap closed. Powered hand tool Belt replacement Inspecting the[...]

13 If further assistance is needed, contact The Hoover Company Consumer Response Center, North Canton, Ohio 44270, Phone: 1-330-499-9499. In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8, Phone: 1-800-263-6376. Always identify your cleaner by the complete model number when request - ing information or ordering parts. (The model number [...]

14 Full One Year W arranty (Domestic Use) Y our HOOVER® appliance is warranted in normal household use, in accordance with the Owner ’ s Manual against original defects in material and workmanship for a period of one full year from date of purchase. This warranty provides, at no cost to you, all labor and parts to place this appliance in cor r e[...]