HP (Hewlett-Packard) 4320T инструкция обслуживания

HP 4320t Mobile Thin Client Maintenance and Service Guide SUMMARY This guide is a troublesh ooting reference us ed for maintaining an d servicing the comput er. It provide s comprehensive information o n identifying co m puter features, components, an d spare parts; troubleshootin g computer prob lems; and performing computer disassembly pr ocedure[...]

© Copyright 2010 Hew lett-Packard Development Company, L.P. Intel and Arrandale are trademarks of Intel Corporation in the U.S. an d other countries. Windows is a U.S. registered trademark of Microsoft Corporation. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties fo[...]

Safety warning notice WARNING! To reduce the possibility of heat-related inju ries or of ove rheating th e computer, do not place the compu ter directly on your lap or o bstruct the computer ai r vents. Use the computer only on a hard, flat surface. Do n ot allow another hard surface, such as an adjoinin g optional printer, or a soft surface, such [...]

iv Safety warning no tice[...]

Table of contents 1 Product description ............ ......... ........... ........... ........ ............ ........... ........ ............ ......... . ................ ......... ....... 1 2 External component id enti fication ...... ........... ........ ........... ........ ........... ....... ........... .......... ....... ........ ........ ..[...]

Grounding guidelines ................ ......... ............ ........... ......... ............ ........... .......... ........... .... 31 Electrostatic dis charge damage ................. ........................... ...................... ...... 31 Packaging and transporting guidelines ........ ........... .......... ........ ........ 32 Works tat[...]

DVD-ROM drive specifications ................ ......... ............ ............ .......... ............ ............ ........ ....... ......... 88 System resource specifications ......... .......... ............ .......... ............ ......... ........... ........... ......... ... .......... 89 7 Power cord set requir ements ... ........... ...[...]

viii[...]

1 Product description Category Description Product Name HP 4320t Mobile Thin Client, UMA Processors Intel® Arrandale™ P4500, 1.8-GH z, 3-MB L3 cache (3 5 W) Chipsets Intel® HM57 Express Graphics Intel® HD Graphics Universal Memory Arch itecture (UMA) graphics subsystem integrated with shared video memory (dynamically allocated) Panels All disp[...]

Category Description Diskette drive Supports external USB diskette drive only Audio/ Visual HD audio - IDT 92HD80 Integrated microphone Two stereo speakers Headphone/microphone ja cks Modem High-speed 56k modem for all regions and countr ies Modem cable not included Supports no-modem option Ethernet 10/100/1000 Ethernet network interface card (NIC)[...]

Category Description Power requirements 65-W Smart AC Adapter with localized cable plug support (3-wire plug with ground pin) 9-cell, 93-Wh Li-ion ba ttery 6-cell, 47-Wh Li-ion ba ttery Security Supports security cable Intel anti-theft support Operating system Preinstalled: Windows® Embedded Standard 7 Windows® Embedded Standard 2009 Web Support:[...]

2 External component identification Top components TouchPad Component Description (1) TouchPad off indicator To turn the TouchPad zone on and off, quickly double-tap the TouchPad off indicator. NOTE: When the TouchPad zone is active, the light is off. (2) TouchPad zone Moves the pointer and selects or activates items on the screen. (3) Left TouchPa[...]

Lights Component Description (1) TouchPad off indicator ● Amber: The TouchPad is off. ● Off: The TouchPad is on. (2) Caps lock light On: Caps lock is on. (3) Power light ● On: The computer is on. ● Blinking: The computer is in the Slee p state. ● Off: The computer is off. (4) Wireless light ● White: An integrated wireless device is on, [...]

Buttons, speakers, and switches NOTE: Your computer may look sligh tly different from the illustrati on in this section. Component Description (1) Speakers (2) Produce sound. (2) Internal display switch Turns off the display if the display is closed while the power is on. (3) Power button ● When the computer is off, press the button to turn o n t[...]

Keys Component Description (1) esc key Displays system information when pressed in combination with the fn key. (2) fn key Executes frequently use d system functions when pressed in combination with a function key or the esc key. (3) Windows logo key Displays the Windows Sta rt menu. (4) Function keys Execute frequently used system functions when p[...]

Front components Component Description (1) Drive light ● Blinking white: The solid-state module or optical drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the solid- state module. (2) Media Card Reader Supports the follow ing optional digital card formats: ● Memory Stick ● Memory Stick Duo (adapter required) ● Me[...]

Right-side components Component Description (1) USB 2.0 ports (2) Connect optional USB devices. (2) RJ-11 (modem) jack Connects a modem cable . (3) Optical drive light (select models only) Blin king: The optical drive is being a ccessed. (4) Optical drive eject button (select models only) Press to eject the optical disc. (5) Optical drive (select m[...]

Left-side components Component Description (1) Security cable slot Attaches an opti onal security cable to the computer. NOTE: The security cable is desi gned to act as a d eterrent, but it may not prevent the computer from being mishandled or stolen. (2) Power connector Connects an AC adapter. (3) Battery light ● Amber: A battery is charging. ?[...]

Bottom components Component Description (1) Battery release latches (2) Release the battery from the batter y bay. (2) Battery bay Holds the battery. Bottom components 1 1[...]

Display NOTE: Your computer may look sligh tly different from the illustrati on in this section. Component Description (1) Internal display switch Turns off the display if the display is closed while the power is on. (2) Internal microphone Records sound. 12 Chapter 2 External component identification[...]

Wireless antennas (select models only) The antennas send and receive signals from o ne or more wireless devices. These anten nas are not visible from the outside of the computer. Component Description WLAN antennas (2)* Send and receive wirele ss signals to communicate with wireless local area networks (WLANs). *For optimal transmission, keep the a[...]

Additional hardware components Component Description (1) Power cord* Connects an AC adapter to an AC outlet. (2) Battery* Powers the computer when the computer is not plugged into an external power source. (3) AC adapter Converts AC power to DC power. *Batteries and power cords vary in appearance by country or region. 14 Chapter 2 External componen[...]

3 Illustrated parts catalog Service tag When ordering pa rts or requestin g information, pr ovide the comput er serial number an d model description provided on the servi ce tag. Component Description (1) Product name The product name affixed to the front of your computer. (2) Serial number (s/n) An alphanumeric number that is unique to each produc[...]

Computer major components Item Description Spare part number (1) 33.8-cm (13.3-in) high-definition (136 6x768 resolution) display assembly (see Display assembly components on page 20 for m ore information on display assembly spar e parts). 599553-001 (2) Switc h cover 599567-001 (3) Keyboard (includes keyb oard cable) 16 Chapter 3 Illustrated parts[...]

Item Description Spare part number ● For use in Belgium 599572-A41 ● For use in Brazil 599572-201 ● For use in Bulgaria 599572-261 ● For use in Canada (French) 599572-121 ● For use in Denmark 599572-081 ● For use in Europe 599572-B31 ● For use in France 599572-051 ● For use in Germany 599572-041 ● For use in Greece 599572-DJ1 ● [...]

Item Description Spare part number (9) Fan 599544-001 (10) Processor heat sink 599546-001 (11) Memory module (PC3-10600, 1333-MHz, DDR3, shared) 2048-MB 598856-002 1024-MB 598859-002 (12) Modem module NOTE: The modem module spare part kit does not include a modem module cable. The modem module cable is included in the Cable Kit. See Cable Kit on pa[...]

Item Description Spare part number For use in Afghanistan, Albania, Algeria, An dorr a, Angola, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahrain, Belarus, Belgiu m, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the Britis h Virgin Islands, Br unei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Ver[...]

Display assembly components Item Description Spare part number Display assembly: 599553-001 (1) Display bezel 599532-001 (2) Display panel (available separately in APJ, using part number 623175-001) (3) Display Hinge Kit (includes display hinges and left and right panel brackets) 599536-001 (4) Display cable and microphone 605557-001 (5) 2 WLAN ant[...]

Plastics Kit Item Description Spare part number Plastics Kit : 599563-001 (1) ExpressCard slot bezel (2) DVD-ROM drive blank ( used with no-ODD option) RJ-11 (modem) connector bla nk (not illustrated, used with no-mod em option) Plastics Kit 21[...]

Cable Kit Item Description Spare part number Cable Kit : 599525-001 (1) Power connector and cable (2) RJ-11 (modem) jack and cable 22 Chapter 3 Illustrated parts catalo g[...]

Mass storage devices Item Description Spare part number (1) Solid-state module (includes bracket) 2-GB 614527-001 4-GB 614528-001 8-GB 634653-001 (2) DVD-ROM drive (includes bezel) 599539-001 Mass storage devices 23[...]

Miscellaneous parts Description Spare part num ber AC adapt ers 65-W, 3-pin Smart AC adapter ● For use in all countries and re g ions except India 609939-001 ● For use in India 609948-001 Power cords (AC power, 3-pin, black, 1.8 3 m) ● For use in Argentina 490371-D01 ● For use in Austria 490371-011 ● For use in Brazil 490371-202 ● For u[...]

Sequential part number listing Spare part number Description 490371-001 Power cord (AC power, 3-pin, black, 1.83 m), for use in North America 490371-011 Power cord (AC power, 3-pin, black, 1.83 m), for use in Austria 490371-021 Power cord (AC power, 3-pin, black, 1.83 m), for use in Europe 490371-031 Power cord (AC power, 3-pin, black, 1.83 m), for[...]

Spare part number Description 582564-001 Broadcom 43224 802.11a/b/g/n 2x2 WiFi Adapter, for u se in Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Canada, Guam, Guinea, Haiti, Ja maic a, Nether Antilles, Puerto Rico, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, the United States, and the U.S. Virgin Islands 5825[...]

Spare part number Description 599565-001 Screw Kit 599566-001 Speaker assembly 599567-001 Switch cover 599569-001 Top cover 599572-001 Keyboard, for use in the United States 599572-031 Keyboard, for use in the United Kingdom 599572-041 Keyboard, for use in Germany 599572-051 Keyboard, for use in Fr ance 599572-061 Keyboard, for use in Italy 599572-[...]

Spare part number Description 609939-001 65-W, 3-pin Smart AC adapter for use in all coun tries and regions except India 609948-001 65-W, 3-pin Smart AC adapter for use in India 611699-001 Processor (Intel® Arrandale™ P4500 1.8- GHz, includes replacement thermal material) 614524-001 System board 614527-001 2-GB solid-state module (includes brack[...]

4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to comple te the removal and re placement procedures: ● Flat-bla ded screw driver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdr iver Service considerations The following sectio ns include some of the cons iderations[...]

Cables and connectors CAUTION: When servicing the computer, be sure that c abl es are placed in their prop er locations during the reassembly p rocess. Improp er cable placem ent can damage the co mputer. Cables must be handle d with extreme care to avo id damage. Apply only th e tension require d to unseat or seat the cables during removal an d in[...]

Grounding guidelines Electrostatic discharge damage Electronic componen ts are sensit ive to electrostatic d ischarge (ESD). Circu itry design and struc ture determine the deg ree of sensitiv ity. Networks bu ilt into many integrated circuits provide some protection, bu t in many cases, ESD conta ins enough power to alter device parameters or melt [...]

Packaging and transporting guidelines Follow these groun ding guidelines whe n packaging and transp orting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts an d assemblies wi th conductive or approv ed containe rs or packaging. ● Keep ESD-sensitive parts in their conta [...]

Equipment guidelines Grounding equi pment must include eith er a wrist stra p or a foot strap at a grou nded workstation. ● When seated, wear a wrist strap connected to a grounded syste m. Wrist straps are flexibl e straps with a minimu m of one megohm ±1 0% resi stance in the ground co rds. To provid e proper ground, wear a strap snugl y agains[...]

Component replacement procedures This section provides re moval and replacement procedures. There are as many as 8 3 screws, in 8 different sizes, that mu st be re moved, replac ed, or loosene d when servicing the computer. Make specia l note of each screw size an d location during remova l and replacement. Service tag When ordering pa rts or reque[...]

Computer feet Description Spare part num ber Rubber Kit (include s computer feet) 599564-001 The computer feet a re adhesive -backed rubber pads . The feet are in cluded in the Rubber Kit, spare part number 599 564-001. The re are 4 ru bber feet that atta ch to the base enclosure in the locati ons illustrated below. Component replacement procedures[...]

Battery Description Spare part num ber Battery 9-cell, 93-Wh (2.8-Ah) Li-ion 593573-001 6-cell, 47-Wh (2.2-Ah) Li-ion 593572-001 Before disa ssembling the co mputer, follow these ste ps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the powe[...]

Switch cover Description Spare part number Switch cover 599567-001 Before removing the switch cover, follow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the power cord from the AC outlet and then unpl ugging the AC adap ter fro[...]

4. Slide the swit ch cove r back (1) , an d then remove it fro m the computer (2) . Reverse this procedure to insta ll the switch cover and ke yboard. 38 Chapter 4 Remova l and replacement procedures[...]

Keyboard Description Spare part nu mber Keyboard (includes keyboard cable) 599572- xxx NOTE: For a detailed list of keyboards see the parts list in Computer major components o n page 16 Before removing the keyboard, fo llow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e powe[...]

2. Slide the keyboard ba ck toward the displa y (1) , and t hen ro tate it r ight (2) until it rests upside down on the right sid e of the compu ter. 3. Release the zero inserti on force (ZIF) conne ctor (1) to which the keyboard cabl e is attached, an d disconnect the keyboard cable (2) from the system board. 4. Remove the keyboard (3) . Reverse t[...]

Memory module Description Spare part num ber Memory module (PC3-10600, 1333-MHz, DDR3, shared) 2048-MB 598856-002 1024-MB 598859-002 Before removing the memory module, follo w these step s: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the p[...]

3. Remove the memory module (2) by pul ling the module a way from the slot at an angle. NOTE: Memory modules a re designed with a notch (3) to prevent incorrect insertion into the memory module sl ot. Reverse this procedure to in stall a memory module. 42 Chapter 4 Remova l and replacement procedures[...]

DVD-ROM drive Description Spare part num ber DVD-ROM d rive 599539-001 Before r emoving th e DVD-R OM drive, follow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the power cord from the AC outlet and then unpl ugging the AC adap[...]

5. If it is necessary to replace the DVD-ROM drive bracket , positi on the DVD-ROM drive with the rear toward you. 6. Remove the two PM2.0×3.0 screws (1) that secure the DVD-R OM drive bracket to th e DVD- ROM drive. 7. Remove the DVD -ROM drive brac ket (2) . Reverse this procedure to rea sse mble and install a DVD-ROM d rive. 44 Chapter 4 Remova[...]

Power button board Description Spare part num ber Power button board with cable 599517-001 Before removing the power button bo ard, follow thes e steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the power cord from the AC outlet and then[...]

Speakers Description Spare part num ber Speaker assembly 599566-001 Before removing the speakers, follow th ese steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the power cord from the AC outlet and then unpl ugging the AC adap ter from [...]

7. Slide the right spea ker back and out fro m the tab (5) that hold s it at th e right, then lift t he right speaker (6) up and out at an angle. Reverse this procedure to insta ll the speakers. Component replacement procedures 47[...]

Palm rest Description Spare part num ber Palm rest (includes TouchPad) 599551-001 Before removing the palm rest, fol low these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the power cord from the AC outlet and then unpl ugging the AC[...]

5. Remove the palm rest (3) . Reverse this procedure to insta ll the palm rest. Component replacement procedures 49[...]

Solid-state module NOTE: The solid-state module spare part kit includes a solid-state module bracket. Description Spare part num ber 2-GB 614527-001 4-GB 614528-001 8-GB 634653-001 Before removing the solid-state module, foll ow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e[...]

4. Remove the solid-stat e module (4) from th e solid-sta te module b ay. 5. If it is necessary to replace the solid-stat e module bracket, remo ve the PM3.0×3.5 screws (1) from each side of the solid-state module . 6. Lift the bracket (2) straight up to remove it from the s olid-state module. Reverse this procedure to rea ssemble and install the [...]

RTC battery Description Spare part num ber RTC battery 599516-001 Before r emoving th e RTC bat tery, foll ow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect po wer from the compute r by first unpl ugging the power cord from th e AC outlet and then unpluggin g the AC adapter from [...]

Reverse this procedure to in stall the RTC battery. Component replacement procedures 53[...]

WLAN module Description Spare part num ber Broadcom 4312G 802.11b/g WiFi Adapter For use in Barbados, Belize, Canada, the Ca yman Islands, Guam, Puerto Rico, the U nited States, and the U.S. Virgin Islands 504593-003 For use in Afghanistan, Albania, Algeria, A ndorra, Angola, Antigua a nd Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan,[...]

CAUTION: To preven t an unresponsive system, replace the wireless module only wit h a wireless module authorized fo r use in the computer by the governmental agency that regulates wirele ss devices in your country o r region. If you replace the module an d then receive a warnin g message, remove the modu le to restore compu ter functionality , and [...]

4. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN module s are designed with a no tch (4) to prevent incorrect insertion. Reverse this procedure to insta ll the WLAN module. 56 Chapter 4 Remova l and replacement procedures[...]

Heat sink and fan NOTE: The heat sink spare part kit includes replacement thermal material. Description Spare part num ber Fan 599544-001 Processor heat sink 599546-001 Before removing the heat sink, follow the se steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp [...]

4. Lift the right edge of the heat shield to disengage t he tabs on t he left s ide of th e heat sh ield from the top co ver, and then remo ve the heat shield (3) . 5. Disconnect the fan cable from the system board (1) . 6. Loosen the 2.0×5.0 ca ptive screw (2) from the system board, and then remove the fan (3) . 58 Chapter 4 Remova l and replacem[...]

7. Following the sequ ence stamped in to the heat si nk, lo osen the four PM2.5×10.0 captive screws (1) that secure the h eat sink to the proce ssor. 8. Lift the heat sink off the processor (2) , and then lift the heat sink up and to the right to remove the heat sink fr om the base enclosur e (3) . NOTE: The thermal material mu st be thoroughly cl[...]

Processor NOTE: The processor spare part kit includes re placement thermal material. Description Spare part num ber Processor , Intel Arrandale P4500 1.8-GHz, (includes replacement thermal material) 611699-001 Before removing the processor, follow these step s: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer[...]

3. Lift the processor (2) straight up and remove it. NOTE: When you install the pro cessor, the gold triangle (3) on the processor must be aligned with the triangle (4 ) embossed on the processor socket. Reverse this procedure to insta ll the processor. Component replacement procedures 61[...]

Display assembly NOTE: The display assembly spare part kit in cludes 2 WLAN antenn as and cable s. Description Spare part number Display assembly, 33.8-cm (1 3.3-in) HD (1366x768 resolution) 599553-001 ● Display bezel 599532–001 ● Display panel (available separately in APJ, using part n umber 623175-001) ● Display Hinge Kit (inclu des displ[...]

3. Lift the display assembly (4) straight up and remove i t from the base enclo sure. 4. If it is necessary to replace the display bezel, display enclosure, or disp lay hinges, remove the four Mylar screw covers (1) and the four slotted T 8 M2.5×5.0 screws (2) that secure the display bezel to the dis play assembly. The scr ew covers are ava ilable[...]

c. Flex the inside edge of the left side an d the ri ght side of the beze l until it disengages from the display back cover (3) . d. Remove the display bezel from the display back cover (4) . 6. If it is necessary to replac e the displa y hinges, remove the six T8 2.5x5.0 screws (1) that secure the display hinges to the display pane l. Lift the hin[...]

8. Peel back the tape (1) that secures the displa y cable to the displa y panel, and then release the ZIF connector (2) . Remove th e cable from th e display panel con nector (3) . NOTE: The display ca ble includes th e microphone. 9. Remove the display panel. 10. If it is necessary to replace the di splay brackets, remove the four PM2.0×3.0 screw[...]

11. Gently release the integrated microp hone (1) from the clips at the top of the display back cover, remove the displa y cable from the clips and rou ting channel s (2) along the bottom of t he display back cover, and then remove the display cable (3) . 12. If it is necessary to remove the wirel ess antennas and ca bles: a. Detach the WLAN antenn[...]

Top cover Description Spare part num ber Top cover 599569-00 1 Before removing the top cover, follow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the power cord from the AC outlet and then unpl ugging the AC adap ter from the c[...]

4. Release the top co ver from the side s of the base enclosure , and gent ly use a flat-bladed screwdriver to pry lo ose the top cover alo ng the front edg e (2) . 5. Remove the top cover (3) . Reverse this procedure to insta ll the top cover. 68 Chapter 4 Remova l and replacement procedures[...]

Modem module Description Spare part num ber Modem module NOTE: The modem module spare part kit does not include a modem module cable. The modem module cable is included in the Cable Kit. See Cable Kit on p age 22 for more Cable Kit spare part information. High-speed 56K modem for use in all countries and r egions except Australia and New Zealand 51[...]

5. Remove the modem module. Reverse this procedure to in stall the modem module. 70 Chapter 4 Remova l and replacement procedures[...]

System board NOTE: The system board spare part kit includes replacemen t thermal material. Description Spare part num ber System board (includes replacement thermal material) 614524-001 Before removing the system board, follow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e p[...]

5. Use the optical drive connector (4) to lift the right side (5) of the system board. 6. Remove the system board (6) at an angle. Reverse this procedure to insta ll the system board. 72 Chapter 4 Remova l and replacement procedures[...]

USB connector board Description Spare part number USB board with ca ble 599524-001 Before r emoving the USB co nnecto r assembly, follow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unplugging the power cord from the AC outlet and then un[...]

3. Remove the USB connector asse mbly (2) from the base enclosure. Reverse this procedure to insta ll the USB connector assem bly. 74 Chapter 4 Remova l and replacement procedures[...]

Modem module cable NOTE: The modem module cable with RJ-11 connector is includ ed in the Cable Kit on page 22 , part number 599525-0 01. Before removing the modem module cable, follow these steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unpluggin[...]

3. Remove the modem cable (2 ) from the routing channel in the b ase enclosure. 4. Remove the modem cabl e. Reverse this procedure to in stall the modem cable . 76 Chapter 4 Remova l and replacement procedures[...]

Power connector cable NOTE: The power connector cable (DC power) is included in the Cable Kit on p age 22 , part number 599525-001. Before removing the power connecto r cable, follow thes e steps: 1. Shut down the computer. 2. Disconnect all ext ernal devices connected to the computer. 3. Disconnect th e power from the comp uter by firs t unpluggin[...]

2. Disconnect the power connector cab le from the base enclosure (1) , and then remove the cab le from the routing cha nnel (2) in the base enclosure. 3. Remove the power connector cable. Reverse this procedure to in stall the power connector cable. 78 Chapter 4 Remova l and replacement procedures[...]

5 Computer Setup Starting Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setu p menu items listed in this guide ma y not be supp orted by your computer. NOTE: An external ke yboard or mouse con nected to a USB port can be [...]

Using Computer Setup Navigating and selectin g in Computer Setup The information and setti ngs in Computer Setu p are accessed from the File, Se curity, Diagnostics, and System Configuration men us. To navigate and select in C omputer Setup, f ollow these steps: 1. Turn on or restart the compu ter, and then press esc while the “Press the ESC key [...]

4. Follow the on-screen instructions. 5. To save your change s and exit, click the Save icon in th e lower-left corner of the screen, and then follow the on-scre en instructions. Your changes go into effect when the compu ter restarts. NOTE: Your password settings and se curity setting s are not changed when you restore the factory settings . Using[...]

Computer Setup menus The menu tables in this sect ion provide an over view of Computer Setup options. NOTE: Some of the Computer Se tup menu items list ed in this chapter may no t be supp orted by your computer. File menu Select To do this System Information ● View identification information for the computer and the batteries in the system. ● V[...]

Select To do this Boot Options ● Set a Startup Menu delay (in seconds) . ● Set the Express Boot Popup delay in second s. ● Enable/disable CD-ROM boot (enabled by default) . ● Enable/disable PXE Internal NIC boot (disabled by default). ● Set the boot order. Device Configurations ● Enable/disable USB legacy support (enabled by default). W[...]

Select To do this Built-In Device Options ● Enable/disable the wireless button state (enabled b y default). ● Enable/disable the embedded WLAN device ( enabled by default). ● Enable/disable LAN/WLAN switching (disabled by default). ● Enable/disable the Networ k Interface Controller (LAN) (enabled by default). ● Set the wake on LAN state. [...]

6 Specifications Computer specifications Dimensions Depth 22.81 cm (8.98 in) Width 32.2 cm (12.68 in) Height (front to rear) 27.5 to 35.5 cm (1.08 to 1.40 in) Weight ● With 6-cell battery, one memory module, and optical disk drive < 2.07 kg (4.58 lbs) ● With 6-cell battery, one memory m odule; without optical disk drive < 1.93 kg (4.27 lb[...]

Operating 0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min sweep rate Nonoperating 1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 o ct/ min sweep rate NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer opera tes well within this range of temperatures. 33.8-cm (13.3-in) display specifications Dimensions [...]

Solid-state module specifications 2-GB* 4-GB* 8-GB* Dimensions Height 9.5 mm 9.5 mm 9.5 mm Width 70 mm 70 mm 70 mm Weight 15 g 15 g 15 g Interface typ e SATA II SATA II SATA II Transfer rate Sustained read 54 MB/sec 102 MB/sec 102 MB/sec Sustained write 33 MB/sec 55 MB/sec 57 MB/sec Operati ng temp eratur e 0 °C to 70 °C (32°F to 158° F) 0°C t[...]

DVD-ROM drive specifications Applicable disc DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18, CD- ROM (Mode 1 and 2), CD Digital Audio, CD-XA ready (Mode 2, Form 1 and For m 2), CD-I (Mode 2, Form 1 and Form 2), CD-R, CD-R W, Photo CD (single and multise ssion), CD-Bridg e Random access time DVD < 125 ms CD < 100 ms Cache buffer 512 KB Data transfer ra[...]

System resource specifications You can use Device Manager to ge t a graphical view of the system resources that control how the devices work on the computer. Sy stem resources that are accessible from Device Manager are direct memory access (DMA) channels, i nput/output (I/O) ports, interru pt request (IRQ) lines, a nd memory addresses. If two devi[...]

7 Power cord set requirements The wide range input fe ature of the co mputer permits it to ope rate from any line voltag e from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor powe r cord set included wi th t he computer meets the requirem ents for use in the country or region where the e quipment is purchased . Power cord sets for[...]

Requirements for specific countries and regions Country/region Accredited a gency Applicable note nu mber Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands KEM A 1 Norway NEMKO 1 The People's Republic of China CCC 5 South Korea EK 4 Sw[...]

8 Recycling Battery When a battery has reached the end of its useful life, d o not dispose of the battery in genera l household waste. Follo w the local laws a nd regulati ons in your area for computer b attery disposal. Display WARNING! The backlight contains mercury. Exe rcise caution when removing an d handling the backlight to avoid dama ging t[...]

Perform the following ste ps to di sassemble the display assembly: 1. Remove all screw covers (1) and screws (2 ) that secure the display bezel to the display assembly. 2. Lift up and out o n the left and ri ght inside edges (1) and the top an d bottom inside edge s (2) of the display beze l until the bezel disengag es from the display assembly. 3.[...]

4. Disconnect all disp lay panel cables (1) from the display i nverter and remove the in verter (2) . 5. Remove all screws (1) that secure the display panel a ssembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel a ssembly upside-down. 8. Remove all screws that secure the di[...]

10. Remove the display pan el frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlig ht cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel righ t-side up. Display 95[...]

15. Remove the backlight cables (1) from the clip (2) in the display pa nel. 16. Turn th e display panel upside -down. WARNING ! The backlight contains mercury. Exercise caution when removing an d handling the backlight to avoid damag ing this compon ent a nd causing exposu re to the mercury. 17. Remove the backlight frame from th e display panel. [...]

18. Remove the backlight from the backlight frame. 19. Disconnec t the display pane l cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rea r panel. 21. Release the LCD panel (3) from the d isplay rear panel. 22. Release the tape (4) that secures th e LCD panel to the display rea r panel. 23. Remove th[...]

Index A AC adapter identifying 14 spare part numbers 24 antenna, disconnecting 55 antennas WLAN 13 applications key, Windo ws 7 audio, product description 2 audio-in (microphone) jack identifying 8 audio-out (head phone) jack identifying 8 B base enclosure, spare p art number 19 battery identifying 14 remov al 36 spare part number 19, 36 battery ba[...]

Ethernet, product description 2 Execution Disable 83 ExpressCard slot bezel, illustrated 21 ExpressCard slot, identifying 10 external media cards, prod uct description 2 external monitor port identifying 10 F fan remov al 57 spare part number 18, 57 feet locations 35 spare part number 35 File menu 82 fn key 7 function keys 7 G graphics, pr oduct de[...]

Ethernet 2 external media ca rds 2 graphics 1 keyboard 2 memory module 1 modem module 2 operating system 3 optical drives 1 panels 1 pointing devices 2 ports 2 power requirements 3 processors 1 product name 1 security 3 serviceability 3 solid-state module 1 visual 2 wireless 2 product name 1 R release latche s, battery 11 removal/replacement prelim[...]