HP (Hewlett-Packard) mp3130 инструкция обслуживания

1 hp mp3 130 digit al pr o jec tor user’s g u ide[...]

Notic e This manual and any e xamples contained herein are provided “as is” and are subject to change without notice. He wlett-Packard Company mak es no warranty of any kind with regard to this manual, including, but not limited to, the implie d w arranties of merchantability and fitness for a particular purpose. He wlett-Packard Compan y shall[...]

User’s G uide 3 Contents 1 Setting Up What’s in the Box?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Identifying Common Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Projector at a glance . . . . . . . . . . . [...]

4 User ’s Guide Cont ent s 3 Adjusting the Projector Adjusting the Picture and Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 To adjust the shape of the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 To adjust the image according to the type of p[...]

User’s G uide 5 Cont ent s 6 Fixing Problems Troubleshooting Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 9 Start-up problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Picture problems . . . . . . . . . . . . . .[...]

6 User ’s Guide Cont ent s[...]

User’s G uide 7 1 Setting Up The chapter explains ho w to install and set up the HP digital projector . ■ “What’ s in the Box?” on page 8 ■ “Identifying Common Features” on page 9 ■ “Setting Up the Projector” on page 16 ■ “T urning On and Off” on page 27 ■ “Making Basic Adjustments” on page 29[...]

8 User ’s Guide Settin g Up What ’s in the Box? Before setting up your projector , be sure your shipping box includes the following items. If the shipping box does not contain any of the follo wing items, contact HP . Identif ying the contents of the box S ymbol Item Function 1 Carr ying c ase Carries an d p rotects projector . 2 Doc umentati o[...]

User’s G uide 9 Settin g Up Identif ying Common F eatures This section identifies common features and functions of the projector . ■ “Projector at a glance” on page 10 ■ “Projector buttons and lights” on page 11 ■ “Back panel” on page 12 ■ “Remote control” on page 13 ■ “ A ccessories” on page 15 9 Com posite R CA vid[...]

10 User ’s Guide Settin g Up Projector at a glance Identifying the projector S ymbol Item Function 1 Button panel Con tains buttons and lights . 2 Z oom ring Enlar ges pi ctur e siz e 100–120%. 3 F ocus r ing F ocus es at distance s of 1.2 to 12 m ( 4 to 40 ft) . 4 Lens co ver Pr otects lens . 5 Lamp lat ch Releas es lamp housing f or replaceme[...]

User’s G uide 11 Settin g Up Projector buttons and lights Identifying buttons and lights on the projector S ymbol Item Function 1 Enter button , back button, and dir ectio nal arr ow s Change pr ojecto r settings using the on-scr een menu . 2 Sour ce button S witc hes to the ne xt input so urce . 3 Theat er v ideo button Optimi zes the p ictur e [...]

12 User ’s Guide Settin g Up Back pa nel Identifying the bac k panel S ymbol Item Function 1 M1 input Connec ts var ious equipme nt w ith analog- and digital-v ideo outpu t, inc luding computers. A lso supports USB-de vice outpu t for co ntr olling a mouse . 2 S -vi deo input Connec ts v ideo input f r om dev ices lik e VCRs and D VD play ers. 3 [...]

User’s G uide 13 Settin g Up Remote contr o l ✎ Before using the remote control, insta ll two AAA batteries. See “T o replace the battery in the remote control” on page 50. Identif ying the remote contr ol with case c losed S ymbol Item Function 1 P age -up and page -do wn do wn Sc r oll up and do wn thr ough pages on a connected com puter [...]

14 User ’s Guide Settin g Up Å WA R N I N G : T o r educe the risk o f injury to the e y es, do not look dir ectly in to the r emote con tr ol laser li ght , and do not point the laser li ght into an yone ’s ey es. Identifying remote contr ol with case open S ymbol Item Function 1 Theat er v ideo button Optimi ze s the pic tur e fo r vi deo in[...]

User’s G uide 15 Settin g Up Accessories HP of fers accessories that can enhance th e operation of your HP projector . See your projector dealer or visit http://www .hp.com to purchase accessories such as these: ■ Smart attachment module (connect a comput er through your local network, add an optional 802.11b card for wireless co mputer connect[...]

16 User ’s Guide Settin g Up Setting Up t he Projector This section describes ho w to set up, plan, and connect the projector . ■ “T o position projector” on page 17 ■ “T o set up on a table” on page 19 ■ “T o connect power” on page 19 ■ “T o connect a computer” on page 20 ■ “T o connect a handheld organizer” on page[...]

User’s G uide 17 Settin g Up T o position projector The follo wing tables show you where to position the projector in relation to the screen. Identifying image size r elative t o distance from screen Image siz e (diagonal) Image siz e (width) Distance (lens to screen) 30 in . 0.8 m 2 4 in. 0.6 m 4 7–48 in . 1.2 m 40 in . 1. 0 m 3 2 in. 0.8 m 54[...]

18 User ’s Guide Settin g Up If you do not want to use the distance tabl e, you can use the follo wing equations to help determine where to install the projector relati ve to the screen. Calculating projection dimensions distance f ro m lens to sc r een = A × w idth of s cr een minimum and max imum dist ance fr om scr een = B w idth of s cr een [...]

User’s G uide 19 Settin g Up T o set up on a tabl e 1. Place the projector on a stable platform lo cated 1.2 to 12 m (4 to 40 ft) in front of the screen. Ideally , the platform should be lower than the bottom of the screen. 2. Connect one end of the po wer cord to th e back of the projector and the other end to an electrical outlet. 3. When you f[...]

20 User ’s Guide Settin g Up T o conn ect a computer Computer with V GA port 1. Connect the M1-to-VGA/USB cable be tween the M1 port on the projector 1 and the VGA port on the computer 2 . 2. (Optional) T o allo w the remote control to function as the computer mouse, connect the USB plug of the M1-to-VG A/USB cable into the USB port on the comput[...]

User’s G uide 21 Settin g Up Computer with D VI port The connections are similiar to the VGA com puter connection. F or a visual aid, see the pre vious image. 1. Connect an M1-to-D VI/USB cable (av a il able from HP) between the M1 port on the projector 1 and the D VI port on the computer 2 . 2. (Optional) T o allo w the remote control to functio[...]

22 User ’s Guide Settin g Up T o connec t a handheld organiz er 1. Be sure the handheld org anizer has a VGA-out port. If necessary , install a VGA-out accessory card into the or ganizer . ✎ Not all handhelds come with VGA-out ports. F or example, the iP A Q Pocket PC requires a VGA-out PC Card with 15-pin connector . 2. Connect an M1-to-VGA/US[...]

User’s G uide 23 Settin g Up T o conn ect video sources S-video connection Many D VD players and VCRs hav e S-video output. 1. Connect the S-video cable between the S-video port on the projector 1 and the video de vice 2 . 2. (Optional) T o get audio, connect the mini-phone audio cable between the audio port on the projector 3 and the video de vi[...]

24 User ’s Guide Settin g Up Composite video connection Many VCRs and other video equipment ha ve composite video output, a single RCA video output connector . 1. Connect the composite video cable ( RCA connector) between the composite video port on the projector 1 and RCA video port on the video de vice 2 . 2. (Optional) T o get audio, connect t[...]

User’s G uide 25 Settin g Up Component video connection Many D VD players and other high-quality video de vices provide component video output, usually three RCA connectors labeled YPbPr or YCbCr . 1. Connect an M1-to-component-video cable (av ailable from HP) between the M1 port on the projector 1 and YPbPr or YCbCr port on the video de vice 2 .[...]

26 User ’s Guide Settin g Up SCAR T connection Se veral types of video de vices provide a SCAR T video connection. 1. Connect an M1-to-SCAR T adapter cable (av ailable from HP) to the M1 port on the projector 1 , then connect a SCAR T cable from the adapter to the SCAR T de vice 2 . 2. (Optional) T o get audio, connect the mini-phone audio cable [...]

User’s G uide 27 Settin g Up T urning On and Off This section provides instructions on turning the projector on and of f. ■ “T o turn the projector on” on page 27 ■ “T o turn the projector off” on page 28 ■ “T o reset the projector” on page 28 T o turn the projector on 1. Be sure the po wer cord is connected. 2. Remov e the lens[...]

28 User ’s Guide Settin g Up T o turn the projector off 1. Press the po wer button on the projector or remote control to turn of f the projector . The po wer button blinks during the cool-do wn period, then the projector turns off. 2. Y ou can disconnect video and audio equipment from the projector during the cool-do wn period, but not the po wer[...]

User’s G uide 29 Settin g Up Making B asic Adjustments This section provides instructions on making basic adjustments to the projector . ■ “T o aim the projector” on page 29 ■ “T o adjust the focus and zoom” on page 30 T o aim t he projector ✎ Whene ver you press the tilt b utton to aim the projector, the supports pop out from the b[...]

30 User ’s Guide Settin g Up T o adjust th e focus and z oom 1. Rotate the focus ring until the image becomes clear . The projector can be focused at distances of 1.2 to 12 m (4 to 40 ft). 2. Rotate the zoom ring to adjust the picture size from 100 to 120%. If the picture does not fit the screen, you might ha ve to mov e the projector closer to t[...]

User’s G uide 31 2 Gi ving Pr esentations The chapter explains ho w to giv e presentations with the projector . ■ “Using the Remote Control” on page 31 ■ “Sho wing Presentations” on page 33 Using the Remote Control ■ T o turn the project on or off, press the po wer button 5 . ■ T o turn on the laser pointer, hold down the blue las[...]

32 User ’s Guide Gi ving Pr esen tations ■ T o control page-up and page-down on a computer , press the page-up 1 and page-do wn 1 b uttons. This feature requires a USB connection between the projector and computer . ■ Slide the remote control case open to use additional buttons. ❏ T o optimize the picture for the type of input signal, press[...]

User’s G uide 33 Gi vi ng Pre sentati ons Sho wing Pr esentations This section describes se veral things you can do during presentations. ■ “T o present from a computer” on page 33 ■ “T o change the source” on page 34 ■ “T o hide or show the display” on page 34 T o present fr om a computer 1. Be sure the computer is connected to[...]

34 User ’s Guide Gi ving Pr esen tations T o c hange t he source T o change the source, either: ■ Press the source b utton on the projector or remote control. ■ Open the on-screen menu, select Input, and select the port to which the input source is connected. T o hide or show the display Y ou can hide the display from your audience temporaril[...]

User’s G uide 35 3 Adjusting the Projector This chapter describes ho w to make adjustments to the projector . ■ “ A djusting the Picture and Sound” on page 35 ■ “Using the On-Screen Menu” on page 38 Adjusting the P icture and Sound This section provides the follo wing instructions on adjusting the picture and sound. ■ “T o adjust [...]

36 User ’s Guide Adj usting the Pr ojector ❏ If you want to turn on automatic ve r tical keystone correction, press the enter button until this option is enabled. ❏ If you want to disable the au tomatic correction, press the enter b utton until the option is disabled. 3. Press the back button to sa ve the settings. ✎ If you adjust the ke ys[...]

User’s G uide 37 Adj usting the Pr ojector T o adjust oth er image set tings The on-screen menu provides man y settings that allo w you to fine-tune the picture. 1. Open the on-screen menu and select Adjust Picture. 2. Change the picture adjustments as needed. From the Adjust Picture menu, you can change basic and adv anced picture options, such [...]

38 User ’s Guide Adj usting the Pr ojector Using the O n-Screen Menu This section explains ho w to navigate the on-screen menu and pro vides function definitions. The tables in this section describe all the functions a vailable in the on-screen menu for the firmw are version at publication. If your f irmware is a dif ferent version, some menus mi[...]

User’s G uide 39 Adj usting the Pr ojector T o c hange set tings using the on -sc reen menu Y ou can change the on-screen menu settings with either the b uttons on the projector or on the remote control. 1. Press enter on the projector or the remote control to open the on-screen menu. 2. Press up or down to highlight the desired menu, and press e[...]

40 User ’s Guide Adj usting the Pr ojector Quick cho ice menu This menu provides quick access to commonly used functions from other menus. The menu in your projector might dif fer from the menu shown belo w . Quick cho ice K ey stone corr ection Cor r ects the slanted edge s of an image . This func tion compens ates f or of an image that is not a[...]

User’s G uide 41 Adj usting the Pr ojector Input menu For a visual aid, see “Back panel” on page 12. Input Digital/analog gr aphics (M1) Show s the digital or analog input to the M1 po rt. This port connec ts to se ve ral ty pes of de v ices , including analog V G A and S CART de vi ces and digital Di gital Vi deo Interface (D VI) dev ices . [...]

42 User ’s Guide Adj usting the Pr ojector Adjust picture menu Adjus t p ic ture P ictur e mode Adj usts the color se ttings for the type o f pi ctur e . Y ou can optimi ze the p ic ture f or computer pr esentati ons or v ideo output . The r emote contr ol and pro jector hav e but tons to c hange the pictur e mode. Brightness Brightens or darkens[...]

User’s G uide 43 Adj usting the Pr ojector Re set k ey stone cor recti on Re sets k ey stone cor recti on to z ero . Aspect r atio Selec ts the pr oportions of the image that is not auto maticall y corr ected b y the proj ector . • T o automati cally adapt to mos t inputs, s elect Best Fit . • T o str etch the pi cture t o cov er the entir e [...]

44 User ’s Guide Adj usting the Pr ojector Audi o m enu Setup menu Audio Mute Stop s the audio o utput . V olume Changes the loudness o f the audio . T r eble Changes the loudne ss of the highe r fr equenci es. Bass Changes the loudne ss of the lo wer f r equenc ies. Re set audi o settings Re sets this men u to the def ault value s. Setup Languag[...]

User’s G uide 45 Adj usting the Pr ojector Help menu Help About this pr ojec tor Display s informati on and status f or the pr oj ector . Diagno stic s Sho w tests f or chec king the oper ation o f the pr oj ector and the r emote contr ol.[...]

46 User ’s Guide Adj usting the Pr ojector[...]

User’s G uide 47 4 M aintaining th e Pr ojec tor This chapter explains ho w to maintain the projector . ■ “Performing Routine Maintenance” on page 47 ■ “Upgrading the Projector” on page 51 P erforming R outine M aintenance This section provides instructions on performing routing maintenance. ■ “T o get the projector status” on p[...]

48 User ’s Guide Maintaining the Pr ojector Ä CAUT ION: Cleaning r equir es speci al consider ation: ■ Do not spr ay an y t ype o f fluid or c leaner directl y on the lens surface. C leaners might damage the lens . ■ Do not us e fabr ic soft ener w hen w ashing a cleaning c loth or softener sheets whe n drying the c loth. C hemicals on the c[...]

User’s G uide 49 Maintaining the Pr ojec tor 6. T urn on the projector . If the lamp does not turn on after the warm-up period, try reinstalling the lamp again. 7. Open the on-screen menu and select Setup > Reset lamp hours. Å WA R N I N G : The lamp con tains a small amount of me r cury . If the lamp br eaks, adequatel y ventilat e the area [...]

50 User ’s Guide Maintaining the Pr ojector T o replace the bat tery in t he remote contr ol 1. Slide the remote control case open to re veal the battery compartment. 2. On the back of the remote control remov e the battery cov er 1 to re veal the batteries. 3. Remov e the old batteries and install two ne w AAA batteries 2 . 4. Install the batter[...]

User’s G uide 51 Maintaining the Pr ojec tor Upgrading the Projector T o update th e firm ware HP might periodically release updated versio ns of the projector f irmware to enhance the projector performance. The projector firmw are version is sho wn in the on-screen menu at Help > About this projector . Check for updated v ersions at http://ww[...]

52 User ’s Guide Maintaining the Pr ojector[...]

User’s G uide 53 5 Installing P ermanently This chapter explains ho w to permanently install the digital projector . Installing the Projector This section provides instructions on ho w to permanently install the projector . ■ “T o mount the projector on a tripod” on page 53 ■ “T o install on a table” on page 54 ■ “T o install on t[...]

54 User ’s Guide Installing P ermanentl y 3. Attach the tripod mounting block to the tripod mount hole on the bottom of the projector . 4. Attach the projector and tripod mounting block to the tripod according to the tripod manufacturer’ s instructions. T o install on a tabl e This installation is cov ered in detail in Ch apter 1. See “Settin[...]

User’s G uide 55 Installing P ermanentl y T o install on th e ceiling Å WA R N I N G : T o minimi z e the risk of inj ury fr om imprope rl y installed equipmen t, it is r ecommended that a pro fe ssional ins taller perf orms the ce iling installati on. 1. Align the end of the ceiling-mount bracket with the center hole in the lo wer-mount bracket[...]

56 User ’s Guide Installing P ermanentl y T o install for rear pr ojec tion 1. Place the projector 1.2 to 12 m (4 to 40 ft) behind a translucent screen that is designed for rear projection. See “T o set up on a table” on page 19 or “T o install on the ceiling” on page 55 for more instructions. 2. Open the on-screen menu and select Setup &[...]

User’s G uide 57 Installing P ermanentl y T o loc k th e projector The projector includes a built-in slot to s ecure the projector with a cable and a lock (such as the K ensington MicroSav er lock sy stem, av ailable at many computer stores). 1. Wrap the cable around a secure object, such as a table leg. Loop the cable to create a slip knot aroun[...]

58 User ’s Guide Installing P ermanentl y[...]

User’s G uide 59 6 Fixi n g Pro bl em s This chapter describes potential problems and of fers suggestions to help correct them. ■ “T roubleshooting Suggestions” on page 59 ■ “T esting the Projector” on page 67 T roubleshooting Suggestions T o use this section, find the problem statement that is closest to your problem, then try each b[...]

60 User ’s Guide F ix ing Problems Start-up problems If no lights or sounds turn on: ❏ Be sure that the po wer cable is securely connected to the projector and the other end is plugged into an outlet with po wer . ❏ Press the po wer button again. If nothing is projected b ut the projector seems to start up: ❏ Be sure the lens cap has been r[...]

User’s G uide 61 F ix ing Problems P ic ture pr obl ems If the image is not displayed on the scr een, but the HP startup scr een is displayed: ❏ Press the source b utton on the projector or remote control. ❏ T urn off or disable the notebook or desktop computer screen sav er function. ❏ For a computer connection, ensure your notebook comput[...]

62 User ’s Guide F ix ing Problems If the image is out of f ocus: ❏ Be sure the lens cap is remov ed. ❏ While displaying the on-screen menu, adjust the focus ring. (The image size should not change; if it does, you are adjusting the zoom not the focus.) ❏ Ensure the projection screen is 1.2 to 12 m (4 to 40 ft) from the projector . ❏ For [...]

User’s G uide 63 F ix ing Problems If a scrolling or cut-off image is display ed: ❏ Press the auto sync button on the projector or remote control. ❏ If digital magnification is acti vated, press enter to cancel it. ❏ For a computer connection, turn e verything of f, then power on the projector first and po wer on the notebook or desktop com[...]

64 User ’s Guide F ix ing Problems ❏ Open the on-screen menu and select Adjust picture > Color space. Change the selection. ❏ Open the on-screen menu and select Help > Diagnostics. Run color tests. If the projected colors seem completely wr ong: ❏ For a YPbPr or RGB input de vice, be sure all the video connectors are correctly matched[...]

User’s G uide 65 F ix ing Problems Sound problems If no sound is coming out of the projector: ❏ Be sure you hav e an audio cable securely connected between the projector and the input de vice. ❏ Be sure that the mute and volume settings are correct on the input de vice, such as a computer , DVD player , or camcorder . ❏ Open the on-screen m[...]

66 User ’s Guide F ix ing Problems If the lamp shuts off during a presentation: ❏ A minor po wer surge might cause the lamp to shut of f. W ait a few minutes, then po wer on the projector . ❏ The lamp module might hav e burned out. Replace the lamp module. If the lamp bur ns out or makes a popping sound: ❏ When the lamp reaches its end of l[...]

User’s G uide 67 F ix ing Problems T esting t he Projector The on-screen menu contains diagnostic te sts you can use to verify the proper operation of the projector and the remote control. T o run th e projector diagnostics 1. Open the on-screen menu and select Help > Diagnostics. 2. Select a test to perform.[...]

68 User ’s Guide F ix ing Problems[...]

User’s G uide 69 7 Re ference This chapter lists the specifications, safety information, and re gulatory information for the projector . ■ “Specifications” on page 69 ■ “Safety Information” on page 75 ■ “Regulatory Information” on page 77 Specifications Because HP continually improv es its products, the follo wing specifications[...]

70 User ’s Guide Referen c e IR rece iv ers On left and right si des of pr ojec tor Si z e 19 7 mm x 7 8 mm x 2 31 mm ( 7 .8 in . × 3 .0 in . × 9 .1 in.) W ei ght 1.7 k g (3 .8 lb) Lens 2 .0 2 to 1.68 thr o w rati o (distance/w idth) Optical z oom 1.2 :1 Digital z oom Y es K ey stone Automatic corr ection: up to ± 30° ver tical Manual correct[...]

User’s G uide 71 Referen c e Noise le vel 3 7 dB A Env iro nment Ope rating : T emper ature: 10 to 3 5°C (5 0 to 9 5°F) Humidity: 80% RH max , non-condensing Altitude: up to 3, 000 m (10, 000 ft) , up to 2 5°C (77° F ) Storage: T emper ature: - 20 to 5 5°C (- 4 to 131°F) Humidity: 80% RH max , non-condensing Altitude: up to 12 , 000 m (4 0,[...]

72 User ’s Guide Referen c e Analog Video Mode Compatibilit y Compatibility Resolution V -S ync (Hz) H-S ync (kHz) V G A 64 0 x 3 5 0 7 0 31. 5 640 x 35 0 8 5 3 7 .9 640 x 400 8 5 3 7 .9 640 x 4 80 60 31.5 640 x 480 7 2 3 7 .9 640 x 480 7 5 3 7 .5 640 x 480 8 5 4 3. 3 7 20 x 400 7 0 31.5 7 20 x 400 85 3 7 .9 S VG A 800 x 6 00 5 6 3 5 .2 800 x 6 0[...]

User’s G uide 73 Referen c e MA C 16 8 3 2 x 6 2 4 7 4.5 5 4 9 .7 25 MA C 19 10 2 4 x 7 6 8 7 5 6 0.2 4 MA C 115 2 x 8 7 0 7 5 . 06 6 8.6 8 MA C G4 640 x 4 80 60 31. 3 5 MA C G4 640 x 4 80 120 6 8.0 3 MA C G4 10 2 4 x 7 68 120 9 7 . 09 i Mac D V 640 x 4 80 117 6 0 i Mac D V 800 x 6 00 9 5 60 i Mac D V 102 4 x 7 68 7 5 60 i Mac D V 115 2 x 8 7 0 7[...]

74 User ’s Guide Referen c e Digital Video Mode C ompatibility Compatibility Resolution V -S ync (Hz) H-S ync (kHz) V G A 64 0 x 3 5 0 7 0 31. 5 640 x 35 0 8 5 3 7 .9 640 x 400 8 5 3 7 .9 640 x 4 80 60 31.5 640 x 480 7 2 3 7 .9 640 x 480 7 5 3 7 .5 640 x 480 8 5 4 3. 3 7 20 x 400 7 0 31.5 7 20 x 400 85 3 7 .9 S VG A 800 x 6 00 5 6 3 5 .2 800 x 6 [...]

User’s G uide 75 Referen c e Safety Information Safety precautions Å WA R N I N G : Observ e the follo wing pr ecautions to r educe the risk of inj ur y . ■ T o prevent e ye injury , do not look directly into the lens when the lamp is on. Do not point the laser light into anyone’ s eyes. ■ T o prevent electrical shock, do not e xpose the p[...]

76 User ’s Guide Referen c e LED safety The infrared ports located on the digital project or and remote control are classified as Class 1 LED de vices according to Intern ational Standard IEC 825-1 (EN60825-1). This de vice is not considered harmful, but the follo wing precautions are recommended: ■ If the unit requires service, contac t an aut[...]

User’s G uide 77 Referen c e Reg ul ato r y I nfo rma ti on This section presents information that sho ws how your digital projector complies with regulations in certain re gions. Any m odif ications to your digital projector not expressly appro ved b y HP could v oid the au thority to operate the digital projector in these regions. U. S . A . Th[...]

78 User ’s Guide Referen c e Japan Ko r e a[...]

User’s G uide 79 Referen c e International For re gulatory identification purposes, you r product is assigned a re gulatory model number . The regulatory model number for your product is listed in the declaration of conformity . This regulatory number is dif ferent from the marketing name and product number . DECLARA TION OF CONFORMITY According [...]

80 User ’s Guide Referen c e[...]

User’s G uide Index 81 Inde x A accessories listing 15 adjust picture 37 aiming the projector raising and lowering 29 analog video mode compatibility 72 audio adjusting 37 B back panel identifying 12 business graphics mode see picture mode buttons projector 11 remote control 13 C ceiling installation setting up 55 component video connection conne[...]

Index 8 2 User ’s Guide Index I image adjusting 37 input/output connectors see back panel installation see ceiling installation see rear projection installation see table installation K Kensington lock 57 keystone correction adjusting 35 L lamp module replacing 48 lamp saver mode 37 language changing 37 laser pointer 31 laser safety precautions 7[...]

User’s G uide Inde x 8 3 Inde x R rear panel see back panel rear projection installation setting up 56 remote control battery replacement 50 identifying with doors closed 13 identifying with doors open 14 using 31 resetting projection settings 64 projector 28 S safety information laser safety 75 LED 76 precautions 75 SCART connection connecting v[...]

Index 8 4 User’s Gui de Index[...]