HP (Hewlett-Packard) V3000 инструкция обслуживания

b Mainten ance and Ser vice Gu id e Co mpaq Pr esar io V3 000 Notebook PC Doc ument P art Number : 4 1 8333 - 0 02 Apr il 200 7 This guide is a troubleshooting reference used for maintaining and servicing the computer . It provides comprehensi ve information on identifying computer features, components, and spare parts; troubleshooting computer pro[...]

© Copyright 2006, 2007 He wlett-Packard De velopment Company , L.P . Microsoft, W indows, and W indows V ista are either trademarks or registered trademarks of Microsoft Cor poration in the United States and/or other countries. Intel, Core, and Cele ron are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United [...]

Saf et y w ar ning notic e Å WA R N I N G : T o r educe the poss ibility of heat-related inj uries or o f ov erheating the computer , do not plac e the computer dir ectly on y our lap or obstruc t the computer air vent s . Use the computer onl y on a hard, flat surface . Do not allow another ha rd surf ace, such a s an adjo ining optional pr inter[...]

Maintenance and Se rvi ce Guide v Cont en ts 1 Product Description 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 1.2 Resetting the Computer . . . . . . . . . . . . . . . . . . . . . . . 1–5 1.3 Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6 1.4 External Components . . . . . . [...]

v i Maintenance and S ervi ce Guide Cont ents 3 Illustrated Parts Catalog 3.1 Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–1 3.2 Computer Major Components . . . . . . . . . . . . . . . . . . 3–2 3.3 Display Assembly Components . . . . . . . . . . . . . . . 3–18 3.4 Mass Storage Devices . . . . . . . . . . . . . . . . .[...]

Cont ent s Maintenance and S ervi ce Guide v ii 5 Removal and Replacement Procedures 5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1 5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–2 5.3 Preparing the Computer for Disassembly . . . . . . . . . 5–4 5.4 Hard Drive . . . . . . . . . . . . . [...]

v iii Maintenance and S ervi ce Guide Cont ents 6 Specifications AS c r e w L i s t i n g B Backup and Recovery in Windows XP C Backup and Recovery in Windows Vista D Display Component Recycling E Connector Pin Assignments F Power Cord Set Requirements Index[...]

Maintenance and Se rvi ce Guide 1–1 1 Pr oduct Descriptio n The Compaq Presario V3000 Notebook PC of fers adv anced modularity , Intel® Core™ Duo, Core Solo, and Celeron® processors or AMD T urion™ 64 Mobile T echnology and Mobile AMD Sempron™ processors, and extensi ve multimedia support. Compaq Pr esari o V3000 Notebook P C[...]

1–2 Maintenance and Serv ice Gui de Produc t Desc r iption 1. 1 F e a t u r e s ■ The follo wing processors are av ailable, varying b y computer model: ❏ Intel Core Duo T7200 (2.00-GHz) ❏ Intel Core Duo T5600 (1.83-GHz) ❏ Intel Core Duo T5500 (1.66-GHz) ❏ Intel Core Duo T5200 (1.60-GHz) ❏ Intel Core Duo T2600 (2.16-GHz) ❏ Intel Core[...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–3 ■ 256-MB DDR synchronous DRAM (SDRAM) at 667 MHz and 533 MHz, expandable to 2.0 GB ■ Microsoft® W indows® XP Home Edition or W indows XP Professional, or Free DOS, v arying by computer model ■ Full-size W indows ke yboard with embedded numeric keypad ■ T ouchPad pointing de vi[...]

1–4 Maintenance and Serv ice Gui de Produc t Desc r iption ❏ External monitor ❏ IEEE 1394 digital (select models only) ❏ Memory Reader (select models only) ❏ Po wer ❏ RJ-11 (modem) ❏ RJ-45 (network) ❏ S-V ideo-out (select models only) ❏ Uni versal Serial Bus (USB) v . 2.0[...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–5 1 .2 Resettin g th e Comp uter If the computer you are servicing has an unkno wn password, follo w these steps to clear the password. These steps also clear CMOS: 1. Prepare the computer for disassembly (refer to Section 5.3, “Preparing the Computer for Disassembly , ” for more info[...]

1–6 Maintenance and Serv ice Gui de Produc t Desc r iption 1. 3 P o w e r M a n a g e m e n t The computer comes with po wer management features that extend battery operating time and conserv e power . The computer supports the follo wing po wer management features: ■ Standby ■ Hibernation ■ Setting customization by the user ■ Hotke ys fo[...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–7 1 .4 External Compon ents The external components on the front of the computer are sho wn belo w and described in T able 1-1. F r ont Components Ta b l e 1 - 1 Front Components Item Component Function 1 Wireless s witch (select models only) T ur ns the wireless f eature on or off , b ut[...]

1–8 Maintenance and Serv ice Gui de Produc t Desc r iption The external components on the right side of the computer are sho wn belo w and described in T able 1-2. R ight-Side C omponents Ta b l e 1 - 2 Right-Side Components Item Component Function 1 Optical drive Reads an optical disc. 2 USB por ts (2) Connect optional USB de vices. 3 RJ-11 (mod[...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–9 The external components on the left side of the computer are sho wn belo w and described in T able 1-3. Lef t-S ide Comp one nts[...]

1–1 0 Maintenance and S ervi ce Guide Produc t Desc r iption Ta b l e 1 - 3 Left-Side Components Item Component Function 1 S-Video-out jack Connects an optional S-Video de vice such as a tele vision, VCR, camcorder , overhead projector , or video capture card. 2 Exter nal monitor por t Connects an e xternal VGA monitor or projector . 3 Expansion [...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–1 1 The computer ke yboard components are sho wn belo w and described in T able 1-4. Key b o a r d C o m p o n e n t s[...]

1–1 2 Maintenance and S ervi ce Guide Produc t Desc r iption T able 1-4 Ke yboar d Components Item Component Function 1 Function ke ys (12) Ex ecute freq uently used system functions when pressed in combination with the fn key . 2 caps lock ke y Enab les caps lock and tur ns on the caps lock light. 3 fn ke y Ex ecutes frequently used system funct[...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–1 3 The computer top components are sho wn belo w and described in T able 1-5. To p C o m p o n e n t s Ta b l e 1 - 5 T op Components Item Component Function 1 P ower b utton When the computer is ■ Off , press to turn on the computer . ■ On, press to enter hibernation. ■ In standby[...]

1–1 4 Maintenance and S ervi ce Guide Produc t Desc r iption 3 Media button If QuickPla y is not installed and the computer is ■ On, the media button opens the m usic program or Media men u, allowing y ou to select a multimedia progr am. ■ Off , the media button does not function. ■ In standby , the media button resumes from standby into Wi[...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–1 5 The computer T ouchPad components are sho wn below and described in T able 1-6. To u c h Pa d C o m p o n e n t s[...]

1–1 6 Maintenance and S ervi ce Guide Produc t Desc r iption Ta b l e 1 - 6 T ouchP ad Components Item Component Function 1 T ouchP ad light Blue: T ouchP ad is enabled. Amber : T ouchP ad is disabled. 2 T ouchP ad Mov es the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, sele[...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–1 7 The external components on the bottom of the computer are sho wn belo w and described in T able 1-7. Bot tom Components Ta b l e 1 - 7 Bottom Components Item Component Function 1 Batter y ba y Holds the batter y . 2 Batter y release latch Releases the battery from the batter y ba y . [...]

1–1 8 Maintenance and S ervi ce Guide Produc t Desc r iption 5 vents (4) Enable airflo w to cool internal components. ✎ The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. 6 Memor y module compar tment Contains the memor y m[...]

Pr oduct De sc r iptio n Maintenance and Se rvi ce Guide 1–1 9 1. 5 D e s i g n O v e r v i e w This section presents a design ov ervie w of key parts and features of the computer . Refer to Chapter 3, “Illustrated Parts Catalog, ” to identify replacement parts, and Chapter 5, “Remov al and Replacement Procedures, ” for disassembly steps.[...]

Maintenance and Se rvi ce Guide 2–1 2 T roubleshooting Å WA R N I N G : Only author i zed tec hnici ans tr ained b y HP should r epair this equipment . All trou bleshooting and r epair procedur es ar e detailed to allo w only su bass embly-/module-lev el r epair . Because of the comple x ity of the indiv idual boards and su basse mblies , do not[...]

2–2 Maintenance and Serv ice Gui de T roubleshooting Using t he Setup U tility Ch anging t he Langu age of t he Setup U tility The follo wing procedure explains ho w to change the language of the Setup Utility . If the computer is not in the Setup Utility , begin at step 1. If the computer is in the Setup Utility , begin at step 2. 1. T o open th[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–3 Navigatin g and Selec ting in t he Setup Utilit y Because the Setup Utility is not W indows-based, it does not support the T ouchPad. Na vigation and selection are by ke ystroke. ■ T o choose a menu or a menu item, use the arro w ke ys. ■ T o choose an item in a drop-do wn list o[...]

2–4 Maintenance and Serv ice Gui de T roubleshooting Restoring Default Settin gs in th e Setup Utilit y The follo wing procedure explains ho w to restore the Setup Utility default settings. If the computer is not in the Setup Utility , begin at step 1. If the computer is in the Setup Utility , begin at step 2. 1. T o open the Setup Utility , turn[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–5 Using Adv anced Setu p Utilit y Features This guide describes the Setup Utility features recommended for all users. For more information about the Setup Utility features recommended for adv anced users only , refer to the Help and Support Center , which is accessible only when the co[...]

2–6 Maintenance and Serv ice Gui de T roubleshooting Cl osing th e Setup Utilit y Y ou can close the Setup Utility with or without saving changes. ■ T o close the Setup Utility and sa ve your changes from the current session, use either of the follo wing procedures: ❏ Press f10 , and then follow the instructions on the screen. – or – ❏ [...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–7 Main Menu Security Menu Ta b l e 2 - 1 Main Menu Select T o Do This System Inf ormation ■ View and change the system time and date. ■ View identification inf or mation about the computer . ■ View specification inf or mation about the processor , memor y size, system BIOS , and [...]

2–8 Maintenance and Serv ice Gui de T roubleshooting S ystem Configuration M enu Ta b l e 2 - 3 System Configuration Menu Select T o Do This Language Suppor t Change the Setup Utility language. Embedded WLAN De vice Radio Enable/disab le an embedded wireless LAN de vice. Embedded Bluetooth De vice (select models only) Enable/disab le an embe dded[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–9 Dia gnostic s Men u 2.2 Setup U tilit y in Windo w s Vista The Setup Utility is a R OM-based information and customization utility that can be used e ven when your W indows® operating system is not working or will not load. ✎ The fingerprint reader (select models only) does not w [...]

2–1 0 Maintenance and S ervi ce Guide T roubleshooting Using t he Setup U tility Ch anging t he Langu age of t he Setup U tility The follo wing procedure explains ho w to change the language of the Setup Utility . If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1. T o start t[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–1 1 Disp laying S ystem Inf ormat ion The follo wing procedure explains ho w to display system information in the Setup Utility . If the Setup Utility is not open, begin at step 1. If the Setup Utility is open, be gin at step 2. 1. T o start the Setup Utility , turn on or restart the c[...]

2–1 2 Maintenance and S ervi ce Guide T roubleshooting Using Adv anced Setu p Utilit y Features This guide describes the Setup Utility features recommended for all users. For more information about the Setup Utility features recommended for adv anced users only , refer to Help and Support, which is accessible only when the computer is in W indows[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–1 3 Cl osing th e Setup Utilit y Y ou can close the Setup Utility with or without saving changes. ■ T o close the Setup Utility and sa ve your changes from the current session, use either of the follo wing procedures: ❏ Press f10 , and then follow the instructions on the screen. ?[...]

2–1 4 Maintenance and S ervi ce Guide T roubleshooting Setup U tility Men us The menu tables in this section provide an o verview of Setup Utility options. ✎ Some of the Setup Utility menu listed in this chapter may not be supported by your computer . Main Menu Security Menu Ta b l e 2 - 5 Main Menu Select T o Do This System Inf ormation ■ Vi[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–1 5 S ystem Configuration M enu Ta b l e 2 - 7 System Configuration Menu Select T o Do This Language Suppor t Change the Setup Utility language. Enhanced SA T A suppor t (select models only) Enable/disab le enhanced SA T A mode. Boot Options Set the f o llowing boot options: ■ f10 an[...]

2–1 6 Maintenance and S ervi ce Guide T roubleshooting Dia gnostic s Men u Ta b l e 2 - 8 Diagnostics Menu Select T o Do This Hard Disk Self T est Run a comprehens iv e self-test on the hard drive. ✎ On models with two hard drives, this menu option is called the Primary Hard Disk Self Test. Secondary Hard Disk Self T est (select models only) Ru[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–1 7 2.3 T roub leshooting Flo wc har ts Ta b l e 2 - 9 T roub leshooting Flowc har ts Overview Flowchart Description 2.1 “Flowchart 2.1—Initial T roubleshooting” 2.2 “Flowchart 2.2—No Po wer , P ar t 1” 2.3 “Flowchart 2.3—No Po wer , P ar t 2” 2.4 “Flowchart 2.4—N[...]

2–1 8 Maintenance and S ervi ce Guide T roubleshooting Flowchart Description 2.14 “Flowchart 2.14—No OS Loading, Optical Dr ive” 2.15 “Flowchart 2.15—No Audio , Part 1” 2.16 “Flowchart 2.16—No Audio , Part 2” 2.17 “Flowchart 2.17—Nonfunctioning Device” 2.18 “Flowchart 2.18—Nonfunctioning Ke yboard” 2.19 “Flowchart [...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–1 9 Flo wc har t 2. 1—Initial T roubleshooting Connecting to network or modem? Begin troubleshooting. Is there power? Is the OS loading? Is there video? (no boot) Is there sound? Beeps, LEDs, or error messages? Keyboard/ pointing device working? Go to “Flowchart 2.17—Nonfunc- tio[...]

2–20 Maintenance and S ervi ce Guide T roubleshooting Flo wc har t 2.2—No P o w er , P ar t 1 1. Reseat the power cables in the docking device and at the AC outlet. 2. Ensure the AC power source is active. 3. Ensure that the power strip is working. Done Remove from docking device (if applicable). Pow er up on batter y power? Po wer up on AC pow[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–2 1 Flo wc har t 2.3—No P o w er , P ar t 2 Continued from “Flowchart 2.2—No P ower , Pa r t 1 . ” Visually check for debris in batter y socket and clean if necessary . Done N Y Po wer on ? Check batter y by recharging it, moving it to another computer , or replacing it. Pow er[...]

2–2 2 Maintenance and S ervi ce Guide T roubleshooting Flo wc har t 2.4—No P o w er , P ar t 3 Continued from “Flowchart 2.3—No P ower , Pa r t 2 . ” Reseat AC adapter in computer and at pow er sou rce . Internal or external AC adapter? Done Done Done Done Po wer on ? Pow er on ? Po wer on ? Plug directly into AC outlet. Po wer LE D on? P[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–2 3 Flowc har t 2.5 —No P o w er , P a rt 4 Y N Continued from “Flowchart 2.4—No P ower , Pa r t 3 . ” Reseat loose components and boards and replace damaged items. Open computer . Loose or damaged parts? Y Close computer and retest. Pow er o n? Done N Replace the following ite[...]

2–2 4 Maintenance and S ervi ce Guide T roubleshooting Flo wc har t 2.6—No Video, P art 1 A N Stand-alone or docking device? No video. Replace the following one at a time. T est after each replacement. 1. Cable between computer and computer display (if applicable) 2. Display 3. System board Internal or external display*? Adjust brightness. Vide[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–2 5 Flo wc har t 2.7—No Video, P art 2 Y N Continued from “Flowchart 2.6—No Video , Pa r t 1 . ” Done Adjust external monitor display . Video OK? Adjust display brightness. Video OK? Video OK? Done Done Check that computer is properly seated in docking device, for bent pins on [...]

2–2 6 Maintenance and S ervi ce Guide T roubleshooting F lo wch a rt 2. 8 — No nf u nct io nin g D ock in g D e vi ce (if a pplic able) Y N Reseat power cord in docking device and power outlet. N Check voltage setting on docking device. Reset monitor cable connector at docking device. Reinstall computer into docking device. Docking device opera[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–2 7 Flo wc har t 2.9—No Opera ting S y stem (OS) Loading No OS loading from hard drive, go to “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reseat power cord in docking device and power outlet. No OS loading.* *NOTE: Before beginning troubleshooting, always check cable[...]

2–2 8 Maintenance and S ervi ce Guide T roubleshooting Flo wc har t 2. 1 0—No OS Loadin g, H ard Driv e, Pa r t 1 Go to “Flowchart 2.17—Nonfunctioning Device . ” Y Done N OS not loading from hard drive. Nonsystem disk message? Go to “Flowchart 2.11—No OS Loading, Hard Drive, P ar t 2. ” Reseat external hard drive. OS loading? Done B[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–29 Flo wc har t 2. 1 1—No OS Loadin g, H ard Driv e, Pa r t 2 Load OS using Operating System disc (if applicable). Continued from “Flowchart 2.10—No OS Loading, Hard Drive, P ar t 1. ” Reseat hard drive. Done Disc or diskette in drive? 1. Replace hard drive. 2. Replace system b[...]

2–30 Maintenance and Se rvi ce Guide T roubleshooting Flo wc har t 2. 1 2—No OS Loa ding , Hard Driv e, Pa r t 3 Y System files on hard drive? Continued from “Flowchart 2.11—No OS Loading, Hard Drive, P ar t 2. ” Clean virus. Done N Install OS and reboot. Virus on hard drive? OS loading from hard drive? Y N Y N Y N Diagnostics on disc or [...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–3 1 Flo wc har t 2. 1 3—N o OS Loading , Disk et te Driv e Replace the following components individually , retesting after each replacement: ■ Diskette driv e Done Y N Reseat diskette drive. OS not loading from diskette drive. Done Y Y Y Y Y Y Y N N N N N N N OS loading? Nonsystem [...]

2–3 2 Maintenance and S ervi ce Guide T roubleshooting Flo wc har t 2. 1 4—N o OS Loading , Optical Driv e Y Done N Bootable disc in drive? Disc in drive? No OS loading from CD-ROM or DVD-ROM drive. Install bootable disc and reboot computer . Go to “Flowchart 2.17—Nonfunctioning Device . ” Go to “Flowchart 2.17—Nonfunctioning Device .[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–33 Flo wc har t 2. 1 5—No Au dio, P art 1 No audio. N Computer in docking device (if applicable)? Internal audio? Audio? Done Undock Audio? Done T u rn up audio internally or externally . Go to “Flowchart 2.16—No Audio , Pa r t 2 . ” Go to “Flowchar t 2.17—Nonfunctioning De[...]

2–34 Maintenance and Se rvi ce Guide T roubleshooting Flo wc har t 2. 1 6—No Audio, P art 2 YN Continued from “Flowchart 2.15—No Audio , Pa r t 1 . ” Reload audio drivers. Audio driver in OS configured? Audio? Y Y Y N N N Correct drivers for application? Connect to external speaker . Load drivers and set configuration in OS. Audio? Done R[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–35 Flo wc har t 2. 1 7—Nonfun ctionin g De vice Done Any physical device detected? Y N Unplug the nonfunctioning device from the computer and inspect cables and plugs for bent or broken pins or other damage. Reseat device. Clear CMOS. Done Fix or replace broken item. Nonfunctioning d[...]

2–3 6 Maintenance and S ervi ce Guide T roubleshooting Flo wc har t 2. 1 8—Nonfunc tioning K e yboard Y N Keyboard operating properly? Keyboard not operating properly . External device works? Replace system board. Replace system board. Connect computer to good external keyboard. Reseat internal keyboard connector (if applicable). Replace intern[...]

Tro u b l e s h o o t i n g Maintenance and Se rvi ce Guide 2–3 7 Flo wc har t 2. 1 9—Nonfunc tioning P ointin g De vice Y N Pointing device not operating properly . External device works? Replace system board. Replace system board. Connect computer to good external pointing device. Reseat internal pointing device connector (if applicable). Rep[...]

2–38 Maintenance and Se rvi ce Guide T roubleshooting Flo wc har t 2.20—No Net w ork/Modem Conne ction Y Disconnect all power from the computer and open. No network or modem connection. N Done Digital line? Network or modem jack active? Replace jack or have jack activated. Connect to nondigital line. NIC/modem configured in OS? Reload drivers a[...]

Maintenance and Se rvi ce Guide 3–1 3 I llustrated P ar ts Ca talog This chapter provides an illustrated parts breakdo wn and a reference for spare part numbers and option part numbers. 3. 1 Serial N umber Location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the compu[...]

3–2 Maintenance and Serv ice Gui de Illustrated P ar ts Catalo g 3.2 Comp uter Major C omponen ts Com put er Major Com ponents[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–3 Ta b l e 3 - 1 Spare P arts: Computer Major Components Item Description Spare P art Number 1 14.0-inch, WXGA displa y assembly (includes wireless antenna transceiv ers and cab les) 417049-001 ✎ Refer to Section 3.3, “Displa y Assembly Components , ” for display assembly interna[...]

3–4 Maintenance and Serv ice Gui de Illustrated P ar ts Catalo g Com put er Major Com ponents[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–5 Ta b l e 3 - 1 Spare P a rts: Computer Major Components (Continued) Item Description Spare P art Number 4 Ke yboar ds (Continued) F or use only with computer models using AMD processors Denmark Fr a n c e F rench Canada Germany Inter national Italy Ko r e a 417069-081 417069-051 4170[...]

3–6 Maintenance and Serv ice Gui de Illustrated P ar ts Catalo g Com put er Major Com ponents[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–7 T able 3-1 Spare P arts: Computer Major Components (Continued) Item Description Spare P art Number 9a Modem modules (include modem module cable) F or use with computer models using Intel processors F or use with computer models using AMD processors 417083-001 431852-001 9b Modem modu[...]

3–8 Maintenance and Serv ice Gui de Illustrated P ar ts Catalo g Com put er Major Com ponents[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–9 Ta b l e 3 - 1 Spare P a rts: Computer Major Components (Continued) Item Description Spare P art Number 14 Processor s (include thermal pad) Intel Core Duo T7200 (2.0 0-GHz), use with V3200 Intel Core Duo T5600 (1.8 3-GHz), use with V3200 Intel Core Duo T5500 (1.6 6-GHz), use with V3[...]

3–1 0 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g Com put er Major Com ponents[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–1 1 Ta b l e 3 - 1 Spare P a rts: Computer Major Components (Continued) Item Description Spare P art Number 16 Fan/heat sink assemb lies (include thermal pads) F or use with computer models using Intel processors: ■ F or use on UMA system boards ■ F or use on discrete system boards[...]

3–1 2 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g Com put er Major Com ponents[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–1 3 Ta b l e 3 - 1 Spare P a rts: Computer Major Components (Continued) Item Description Spare P art Number 21 Hard drives (include frame and connector) F or use only with computer models using Intel processors: 5400-rpm, 160-GB 5400-rpm, 120-GB 442171-001 417059-001 F or use with all [...]

3–1 4 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g Com put er Major Com ponents[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–1 5 Ta b l e 3 - 1 Spare P a rts: Computer Major Components (Continued) Item Description Spare P art Number 25 Mini Card modules ■ 802.11b/g WLAN Mini Card module f or use in the countries or regions listed below . These countries or regions are categorized as most of the world (MO W[...]

3–1 6 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g Com put er Major Com ponents[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–1 7 Ta b l e 3 - 1 Spare P arts: Computer Major Components (Continued) Item Description Spare P art Number 25 Mini Card modules (Continued) F or use with computer models using Intel processors: ■ 802.11a/b/g WLAN Mini Card module fo r use in the countries or regions listed below . Th[...]

3–1 8 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g 3 . 3 Displa y Assembl y Comp one nts Displa y Assembl y Components[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–1 9 T able 3-2 Display Assemb ly Components Spare P a rt Number Information Item Description Spare P art Number 1a 1b Display Plastics Kit F or use with full-f eatured computer models F or use with def eatured computer models Includes: ■ Displa y bezel ■ Displa y enclosure 430472-0[...]

3–20 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g 3.4 Mass Stora ge De vices Mass S tor age Dev ice s[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–2 1 T able 3-3 Mass Storage Devices Spare P a rt Number Information Item Description Spare P art Number 1 Hard drives (include frame and connector) 5400-r pm, 160-GB 5400-r pm, 120-GB 5400-r pm, 100-GB 5400-r pm, 80-GB 5400-r pm, 60-GB 5400-r pm, 40-GB 442171-001 417059-001 417058-001 [...]

3–2 2 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g 3.5 Pla s t ic s Ki t P lasti cs K it Contents T able 3-4 Plastics Kit Spare P a rt Number Information Item Description Spare P art Number Plastics Kit 417074-001 1 2 3 4 Includes: Mini Card compar tment cov er (inc ludes 1 captive screw , secured by a C -c li p) Hard drive cov er[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–2 3 3.6 C a b le Ki t Cable K it Conten ts T able 3-5 Cable Kit Spare P a rt Number Information Item Description Spare P art Number Cable Kit 430474-001 1 2 3 4 Includes: LED board cable T ouchP ad cable USB board cable (includes n um lock light cab le) Bluetooth module cable[...]

3–2 4 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g 3.7 Miscellan eous Ta b l e 3 - 6 Spare P a rts: Miscellaneous (not illustrated) Description Spare P art Number Analog TV tuner 407941-001 Composite S-Video and audio input cable 407939-001 D VB-T TV tuner 412175-001 D VB-T TV tuner antenna 412176-001 Earbud headset 371693-003 HP [...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–2 5 TV tuner antenna 439131-001 Remote control, ExpressCar d (EMEA) 439254-001 Carrying case 418162-001 HP Remote Control 435743-001 Screw Kit (includes the f ollowing screws; ref er to Appendix A, “Screw Listing, ” for more inf or mation on screw specifications and usage) 417109-0[...]

3–2 6 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g Pow e r c o r d s Fo r u s e in : A ustralia and Ne w Zealand 383496-011 Belgium, Europe, Finland, F rance, Germany , Greece, the Netherlands, Norwa y , P or tugal, Spain, and Sweden 383496-021 Brazil 383496-201 Canada, F rench Canada, Latin Amer ica, Thailand, and the United Stat[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–2 7 3.8 Sequen tial P ar t Number Listin g T able 3-7 Spare P arts: Sequential Part Number Listing Spare P art Number Description 309674-001 USB tra vel mouse 364727-001 USB digital drive (not illustrated) 371693-003 Earbud headset 383496-001 P ower cord f or use in Cana da, French Can[...]

3–2 8 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g 407313-001 HP Remote Control 407940-001 RF input adapter cable 407941-001 Analog TV tuner 408483-001 USB infrared receiv er 408485-001 RF cable 409407-001 802.11b/g WLAN Mini Card module f or use with computer models using Intel processors in the MO W1 countr ies or regions listed[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–29 Spare P art Number Description 409497-001 802.11a/b/g WL AN Mini Card module f or use with computer models using Intel processors in the RO W countries or regions listed below: China Ecuador Haiti Honduras P akistan Pe r u Qatar South K orea 409515-001 HP 90-W A C adapter , use with[...]

3–30 Maintenance and Se rvi ce Guide Illustrated P ar ts Catalo g Spare P art Number Description 4170356-001 PM/G72M-V system board f or use with full-f eatured computer models usin g Intel processors 417036-001 GM system boar d f or use with full-f eatured computer models using Intel processors 417037-001 GMZ system b oard f or use with def eat [...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–3 1 Spare P art Number Description 417056-001 5400-r pm, 60-GB hard driv e (includes fr ame and connector) 417057-001 5400-r pm, 80-GB hard driv e (includes fr ame and connector) 417058-001 5400-r pm, 100-GB hard dr ive (includes fr ame and connector) 417059-001 5400-r pm, 120-GB hard [...]

3–3 2 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g Spare P art Number Description 417069-101 K eyboard for use with computer models using AMD processors in Sweden/Finland 417069-121 K eyboard for use with computer models using AMD processors in F rench Canada 417069-161 K eyboard for use with computer models using AMD processors i[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–33 Spare P art Number Description 417092-001 Wireless s witch board (inc ludes wireless s witch board cab le) 417094-001 Base enclosure f or use wi th full-f eatured computer models 417096-001 Rubber F eet Kit (includes computer feet]) 417097-001 Displa y inv er ter 417101-001 Displa y[...]

3–34 Maintenance and Se rvi ce Guide Illustrated P ar ts Catalo g Spare P art Number Description 430459-001 Displa y panel 430460-001 5400-r pm, 40-GB hard driv e (includes fr ame and connector) 430461-001 P ower connecto r cab le for use only with computer models using Intel processors 430462-001 P ower connec tor cab l e f or use with UMA syste[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–35 Spare P art Number Description 431845-001 AMD T urion ML-50 1. 60-GHz processor (includes thermal pad) 431846-001 AMD T urion ML-52 1. 60-GHz processor (includes thermal pad) 431849-001 Mobile AMD Sempron 3400+ (1.80-GHz) processor (includes thermal pad) 431851-001 Fan/heat sink ass[...]

3–3 6 Maintenance and S ervi ce Guide Illustrated P ar ts Catalo g 439129-001 Infrared emitter 439130-001 TV tuner , ExpressCard 439131-001 TV tuner antenna 439254-001 Remote contro l - ExpressCard (EMEA) 440768-001 System board, dv2100 f or use with full-f eatured models 440769-001 System board, dv2100 f or use with def eatured models 440770-001[...]

Illustrated P ar ts Catalog Maintenance and Se rvi ce Guide 3–3 7 Spare P art Number Description 441317-051 K eyboard for use only with computer models using Intel processors in F rance 441317-061 K eyboard for use only with computer models using Intel processors in Italy 441317-071 K eyboard for use only with computer models using Intel processo[...]

3–38 Maintenance and Se rvi ce Guide Illustrated P ar ts Catalo g Spare P art Number Description 441317-281 K eyboard for use only with computer models using Intel processors in Thailand 441317-291 K eyboard for use in J apan 441317-A41 K eyboard f or use only with computer models using Intel processors in Belgium 441317-AB1 K eyboard for use onl[...]

Maintenance and Se rvi ce Guide 4–1 4 Remo val and Repla cement Preliminaries This chapter provides essential information for proper and safe remov al and replacement service. 4. 1 T oo ls Required Y ou will need the follo wing tools to complete the remov al and replacement procedures: ■ Magnetic scre wdri ver ■ Phillips P0 and P1 scre wdri v[...]

4–2 Maintenance and Serv ice Gui de Remo val and Replace ment Pr eliminaries 4.2 Ser vice Consi derations The follo wing sections include some of the considerations that you should keep in mind during disassembly and assembly procedures. ✎ As you remov e each subassembly from the computer , place the subassembly (and all accompanying scre ws) a[...]

Remo val and R eplacement Pr eliminarie s Maintenance and Se rvi ce Guide 4–3 4.3 Pre v en ting D amag e to Re mo v able Dri v es Remov able driv es are fragile components that must be handled with care. T o pre vent damage to the computer , damage to a remov able driv e, or loss of information, observe the follo wing precautions: ■ Before remo[...]

4–4 Maintenance and Serv ice Gui de Remo val and Replace ment Pr eliminaries 4.4 Pre ve nting Elec trosta tic Dama ge Many electronic components are sensiti ve to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensiti vity . Networks b uilt into man y integrated circuits provide some protection, b ut in many[...]

Remo val and R eplacement Pr eliminarie s Maintenance and Se rvi ce Guide 4–5 4.5 P a ck agin g and T ranspor ting Precautions Use the follo wing grounding precautions when packaging and transporting equipment: ■ T o av oid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes. ■ Protect all electrostatic-s[...]

4–6 Maintenance and Serv ice Gui de Remo val and Replace ment Pr eliminaries 4.6 W orksta tion Precautions Use the follo wing grounding precautions at workstations: ■ Cov er the workstation with appro ved static-shielding material (refer to T able 4-2, “Static-Shielding Materials” ). ■ Use a wrist strap connected to a properly grounded wo[...]

Remo val and R eplacement Pr eliminarie s Maintenance and Se rvi ce Guide 4–7 4.7 Groundin g Eq uipmen t and Methods Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ■ When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10[...]

4–8 Maintenance and Serv ice Gui de Remo val and Replace ment Pr eliminaries T able 4-1 sho ws ho w humidity af fects the electrostatic v oltage le vels generated b y different acti vities. T able 4-2 lists the shielding protection provided b y antistatic bags and floor mats. Ta b l e 4 - 1 T ypical Electrostatic V oltage Levels Relative Humidity[...]

Maintenance and Se rvi ce Guide 5–1 5 Remo val and Repla cement Procedur es This chapter provides remo v al and replacement procedures. There are as many as 89 scre ws, in 10 different sizes, that must be remov ed, replaced, or loosened when servicing the computer . Make special note of each scre w size and location during removal and replacement[...]

5–2 Maintenance and Serv ice Gui de Remo val and Replace ment Pr ocedures 5 .2 Di sassembl y Sequence Chart Use the chart belo w to determine the section number to be referenced when removing computer components. Disassembl y Sequence Chart Section Description # of Screws Removed 5.3 Preparing the Computer for Disassembly Batter y 0 5.4 Hard Driv[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–3 Section Description # of Screws Removed 5.10 Key b o a r d 3 5.11 Switch Cov er 3 to remov e the switch co ver 2 to remov e the power button board 5.12 Displa y Assembly Displa y bezel Displa y inv er ter Displa y hinges Displa y lid s witch module Displa y panel Wireless[...]

5–4 Maintenance and Serv ice Gui de Remo val and Replace ment Pr ocedures 5 .3 Preparing t he C ompu ter for Disasse mbl y Before you begin an y remov al or installation procedures: 1. Shut do wn the computer . If you are unsure whether the computer is of f or in Hibernation, turn the computer on, and then shut it do wn through the operating syst[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–5 b . Slide and hold the battery release latch 1 to the left. (The front edge of the battery disengages from the computer .) c. Lift the front edge of the battery 2 up and swing it back. d. Remov e the battery . Re mo v ing the Battery Re verse the abo v e procedure to inst[...]

5–6 Maintenance and Serv ice Gui de Remo val and Replace ment Pr ocedures 5 .4 H ard Dri ve 1. Prepare the computer for disassembly (refer to Section 5.3 ). Hard Drive Spare P ar t Number Inf ormation F or use only with computer mo dels using Intel processors: 5400-r pm, 160-GB 5400-r pm, 120-GB 442171-001 417059-001 F or use with all computer mo[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–7 2. Loosen the two Phillips PM2.0×5.0 scre ws 1 that secure the hard dri ve co ver to the computer . 3. Lift the left side of the cov er 2 and swing it to the right. 4. Remov e the hard dri ve cov er . ✎ The hard dri ve co ver is included in the Plastics Kit, spare part[...]

5–8 Maintenance and Serv ice Gui de Remo val and Replace ment Pr ocedures 5. Remov e the two black Phillips PM2.5×5.0 scre ws 1 that secure the hard dri ve to the computer . 6. Use the mylar tab 2 to lift the hard dri ve 3 until it disconnects from the computer . 7. Remov e the hard dri ve from the hard driv e bay . Re mo v ing the Har d Dr i v [...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–9 8. Remov e the four Phillips PM3.0×3.0 scre ws 1 that secure the hard dri ve frame to the hard dri ve. 9. Lift the frame 2 straight up to remov e if from the hard dri ve. Re mo v ing the Har d Dr i v e F rame and C onnecto r Re verse the abo v e procedure to install and [...]

5–1 0 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5. 5 R TC B a t t e r y 1. Prepare the computer for disassembly (refer to Section 5.3 ). 2. Remov e the hard dri ve cov er ( Section 5.4 ). 3. Disconnect the R TC battery cable 1 from the system board. 4. Remov e the R TC battery 2 . Replac ing the RT C Bat tery RTC Batte[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–1 1 5. 6 C o m p u t e r Fe e t The computer feet are adhesi ve-back ed rubber pads. The feet are included in the Rubber Feet Ki t, spare part number 417096-001. The feet attach to the base enclosure in the locations illustrated belo w . Replac ing the Computer F eet[...]

5–1 2 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5 .7 Mem ory Modul e 1. Prepare the computer for disassembly (refer to Section 5.3 ). Memory Module Spare Part Number Information PC2-5300, 667-MHz 1024-MB 512-MB 256-MB 417055-001 417054-001 417503-001 PC2-4200, 533-MHz 1024-MB 512-MB 256-MB 417052-001 417051-001 417050-[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–1 3 2. Loosen the two Phillips PM2.0×5.0 scre ws 1 that secure the memory module compartment cov er to the computer . 3. Lift the right edge of the memory module compartment cove r 2 , and then swing it to the left. 4. Remov e the memory module compartment co ver . ✎ The[...]

5–1 4 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5. Spread the retaining tabs 1 on each side of the memory module socket to release the memory module. (The edge of the module opposite the socket rises aw ay from the computer .) 6. Slide the module 2 away from the sock et at an angle. ✎ Memory modules are designed with[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–1 5 5 .8 M ini Card Module Mini Card Module Spare P ar t Number Inf ormation Fo r use with computer models using Intel processors: ■ 802.11b/g WLAN module f or use in the MO W 1 countries or regions listed below: 409407-001 Antigua & Barbuda Argentina A ustralia Baham[...]

5–1 6 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures ■ 802.11a/b/g WLAN module f or use in the RO W countr ies or regions listed below: 409497-001 China Ecuador Haiti Honduras P akistan Pe r u Qatar South K orea Uruguay V enezuela Fo r use with computer models using AMD processors: ■ 802.11a/b/g LJ WLAN module fo r use [...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–1 7 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Loosen the Phillips PM2.0×5.0 scre w 1 that secures the Mini Card compartment cov er to the computer . 3. Lift the right edge of the Mini Card compartment cov er 2 , and then swing it to the left. 4. Remov e t[...]

5–1 8 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5. Make note of which wireless antenna cable is attached to which antenna clip on the Mini Card module before disconnecting the cables, then disconnect the cables 1 from the module. 6. Remov e the two Phillips PM2.0×3.0 scre ws 2 that secure the Mini Card module to the c[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–1 9 5 .9 O ptical Driv e 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the Phillips PM2.5×7.0 scre w 1 that secures the optical dri ve to the computer . 3. Insert a thin tool, such as a paper clip, into the media tray release hole 2 . (The optical dri[...]

5–20 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 6. Position the optical dri ve with the optical dri ve bracket to ward you. 7. Remov e the two Phillips PM2.0×3.0 scre ws 1 that secure the optical dri ve brack et to the optical dri ve. 8. Remov e the optical dri ve 2 . Re mo v ing the Optical Dr iv e Brac k et Re verse [...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–2 1 5. 1 0 Keyb o a r d 1. Prepare the computer for disassembly ( Section 5.3 ). Ke yboar d Spare P ar t Number Information F or use with all computer models: Denmark F rance F rench Canada Germany International Israel Italy 441317-081 441317-051 441317-121 441317-041 44131[...]

5–2 2 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 2. Remov e the three Phillips PM2.5×7.0 scre ws that secure the ke yboard to the computer . Re mo v ing the K ey board Sc re ws 3. T urn the computer display-side up with the front panel to ward you. 4. Open the computer as far as possible.[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–2 3 5. Slide the ke yboard 1 back to release the tabs on the front of the ke yboard from the top cov er . 6. Lift the rear edge of the ke yboard 2 and swing it forward until it rests on the palm rest. Rel e as in g th e K eybo a rd[...]

5–2 4 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 7. Release the zero insertion force (ZIF) connector 1 to which the ke yboard cable is connected and disconnect the ke yboard cable 2 from the system board. Disconnec ting the K ey board Ca ble 8. Remov e the ke yboard. Re verse the abo v e procedure to install the ke yboa[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–2 5 5. 1 1 Sw i t c h C ove r 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Remov e the ke yboard ( Section 5.10 ). 3. Close the computer . Switch Co ver Spare Part Number Information F or use with full-f eatured computer models F or use with def eatured compu[...]

5–2 6 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 4. T urn the computer upside down with the front panel to ward you. 5. Remov e the two Phillips PM2.5×9.0 scre ws 1 and the silver Phillips PM2.5×5.0 scre w 2 that secure the switch cov er to the computer . Re mo v ing the S witc h Co v er Sc re w s[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–2 7 6. T urn the computer display-side up with the front tow ard you. 7. Open the computer as far as possible. 8. Disconnect the po wer button board cable 1 from the system board. 9. Release the ZIF connector to which the LED board cable 2 is connected and disconnect the ca[...]

5–2 8 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 10. Lift the front edge of the switch cov e r 1 to disengage it from the computer . 11. Remov e the switch co ver 2 . Re mo v ing the S witc h Co ve r[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–29 12. If it is necessary to replace the po wer button board, remo ve the two Phillips PM2.0×3.0 scre ws 1 that secure the board to the switch cov er , and then remove the po wer button board 2 . 13. If it is necessary to replace th e LED board cable, release the ZIF conne[...]

5–30 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 5 . 1 2 Displa y Assembl y 1. Prepare the computer for disassembly ( Section 5.3 ). 2. Disconnect the Mini Card WLAN antenna cables from the Mini Card WLAN module ( Section 5.8 ). 3. Remov e the Phillips PM2.5×9.0 scre w that secures the display assembly to the computer .[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–3 1 4. T urn the computer display-side up with the front tow ard you. 5. Open the display as far as possible. 6. Disconnect the follo wing cables: 1 Display cable 2 Display lid switch module cable 3 Microphone cable 7. Remov e the wireless antenna cables 4 from the hole in [...]

5–3 2 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures Ä CAUT ION: Su pport the display ass embl y when r emov i ng the f ollo w ing scr ew s. F ailure t o support the display as sembl y can r esult in damage to the display a ssembl y and other computer components. 8. Remov e the f i ve Phillips PM2.5×7.0 screws 1 that secu[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–33 10. Remov e the follo wing: 1 Six rubber scre w cov ers 2 T wo rubber scre w covers 3 Eight Phillips PM2.5×7.0 scre ws ✎ There are two dif ferent sizes of display bezel rubber screw cov ers. The thicker co vers 2 should be installed in the bottom center scre w holes. [...]

5–34 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 11. Flex the insides edges of the left and right sides 1 and the top and bottom sides 2 of the display bezel until the bezel disengages from the display enclosure. 12. Remov e the display bezel 3 . Re mo v ing the Displa y Beze l Display Assemb ly Subcomponents Spare P a r[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–35 13. Remov e the two black Phillips PM2.5×5.0 scre ws 1 that secure the in verter to the display enclosure. 14. Remov e the in verter 2 from the display enclosure. 15. Disconnect the display cable 3 and the backlight cable 4 from the display in verter . Re mo v ing the D[...]

5–3 6 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 16. Remov e the two black Phillips PM2.5×5.0 scre ws 1 that secure the in verter to the in verter bracket. 17. Remov e the in verter 2 from the bracket. Re mo v ing the Displa y Inv erter[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–3 7 18. Remov e the black Phillips PM2.5×5.0 scre w 1 that secures each hinge to the display enclosure. 19. Slide the hinges 2 back to release them from the display enclosure. 20. Remov e the display hinges 3 . Re mo v ing the Displa y Hinges Display Assemb ly Subcomponent[...]

5–38 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 21. Remov e the black Phillips PM2.5×5.0 scre w 1 that secures the display lid switch module to the display enclosure. 22. Remov e the display lid switch module 2 . Re mo v ing the Displa y Lid S witc h Module Display Assemb ly Subcomponents Spare P a rt Number Informatio[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–3 9 23. Remov e the display panel from the display enclosure. Re mo v ing the Displa y P anel Display Assemb ly Subcomponents Spare P a rt Number Information 14.0-inch, WXGA, SV A display pa nel with BrightVie w 430459-001[...]

5–40 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 24. If it is necessary to replace the wireless transcei vers and cables, remov e the two Phillips PM2.5×4.0 scre ws 1 that secure the left and right transcei vers to the display enclosure. 25. Remov e the wireless antenna cables from the clips 2 built in to the left and r[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–4 1 ✎ The microphone and cable are included in the Display Cable Kit, spare part number 430904-001. 28. If it is necessary to replace the microphones and cables, release the retention tabs 1 built in to the display enclosure lining that secure the mic rophones and cables [...]

5–4 2 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5. 1 3 T o p C ove r 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Mini Card compartment cov e r ( Section 5.8 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏ Swit[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–43 3. Remov e the two Phillips PM2.0×3.0 scre ws 1 and the four Phillips PM2.0×4.0 scre ws 2 that secure the top cov er to the computer . Re mo v ing the T o p C o v er Sc r ew s, P art 2[...]

5–44 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 4. T urn the computer right-side up with the front tow ard you. 5. Release the ZIF connector 1 to which the T ouchPad cable is connected and disconnect the cable 2 from the system board. Disconnecting the T ouchP ad Cable[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–45 6. Remov e the two Phillips PM2.0×4.0 scre ws 1 and the Phillips PM2.5×9.0 scre w 2 that secure the top cov er to the computer . Re mo v ing the T o p C o v er Sc r ew s, P art 3 7. Lift up the front edge of the top cov er and remov e it. Re mo v ing the T op Cov er Re[...]

5–46 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 5. 1 4 To u c h P a d 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Mini Card compartment cov e r ( Section 5.8 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏ Swit[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–4 7 2. Release the ZIF connector 1 to which the T ouchPad cable is connected and disconnect the cable 2 from the T ouchPad board. Re mo v ing the T ouchP ad Cable[...]

5–48 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 3. Remov e the f ive Phillips PM2.0×3.0 scre ws 1 that secure the T ouchPad brack et to the top cov er . 4. Remov e the T ouchPad bracket 2 and T ouchPad board 3 from the top cov er . ✎ When removing the T ouchPad bracket and T ouchPad board, make note of the location o[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–4 9 5. Remov e the two Phillips PM2.0×2.0 scre ws 1 that secure the T ouchPad board to the T ouchPad bracket. 6. Remov e the T ouchPad board 2 from the T ouchPad bracket. Re mo v ing the T ouchP ad Board Re verse the abo v e procedure to install the T ouchPad.[...]

5–50 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 5. 1 5 W i r e l e s s Swi t c h B o a r d 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Mini Card compartment cov e r ( Section 5.8 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Se[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–5 1 2. Disconnect the wireless switch board cable 1 from the system board. 3. Remov e the two Phillips PM2.0×3.0 scre ws 2 that secure the wireless switch board to the computer . 4. Remov e the wireless switch board 3 . Re mo v ing the W ir eles s S witc h Board Re verse t[...]

5–5 2 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5 . 1 6 Modem Module 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Mini Card compartment cov e r ( Section 5.8 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏ Swit[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–5 3 2. Disconnect the modem module cable 1 from the modem module. 3. Remov e the two Phillips PM2.0×4.0 scre ws 2 that secure the modem module to the system board. 4. Lift up on the front of the modem module 3 to disconnect it from the system board. 5. Remov e the modem mo[...]

5–54 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 5 . 1 7 Audio/Infrar ed Board 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Mini Card compartment cov e r ( Section 5.8 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) [...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–5 5 2. Release the ZIF connector to which the audio/infrared board cable is connected and disconnect the cable 1 from the system board. 3. Remov e the silv er Phillips PM2.5×5.0 scre w 2 that secures the audio/infrared board to the computer . 4. Lift the rear edge of the a[...]

5–5 6 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5 . 1 8 Bluetooth Modul e 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Mini Card compartment cov e r ( Section 5.8 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–5 7 2. Disconnect the Bluetooth module cable 1 from the system board. 3. Remov e the Bluetooth module 2 . Re mo v ing the Bluetooth Module Re verse the abo v e procedure to install the Bluetooth module.[...]

5–5 8 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5. 1 9 U S B B o a r d 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Mini Card compartment cov e r ( Section 5.8 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏ Sw[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–5 9 2. Disconnect the USB board cable 1 from the system board. 3. Remov e the silv er Phillips PM2.5×5.0 scre w 2 that secures the USB board to the computer . 4. Lift the USB board 3 straight up to remov e it from the computer . 5. Remov e the num lock light 4 from the cli[...]

5–60 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 5 .20 Spea k er Assem bl y 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Mini Card compartment cov e r ( Section 5.8 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–6 1 2. Disconnect the speaker cable 1 from the system board. 3. Remov e the four Phillips PM2.5×4.0 scre ws 2 that secure the speakers to the computer . 4. Lift the speakers 3 straight up to remo ve them from the computer . Re mo v ing the Speak er Assembl y Re verse the a[...]

5–6 2 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5. 2 1 Sys t e m B o a r d ✎ When replacing the system board, ensure that the follo wing components are remov ed from the defecti ve system board and installed on the replacement system board: ■ R TC battery ( Section 5.5 ) ■ Memory modules ( Section 5.7 ) ■ Mini [...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–63 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏ Switch cov er ( Section 5.11 ) ❏ Display assembly ( Section 5.12 ) ❏ T[...]

5–64 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 3. Disconnect the po wer connector cable 1 from the system board. 4. Remov e the two black Phillips PM2.5×5.0 scre ws 2 that secure the system board to the top cov er . Re mo v ing the S yst em Boar d Sc r ew s[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–65 5. Use the optical dri ve connector 1 to lift the right side of the system board until it rests at an angle. 6. Slide the system board 2 to the right until the connectors on the left side of the system board disengage from the base enclosure. 7. Remov e the system board [...]

5–66 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 8. If it is necessary to replace the modem cable, remov e the modem cable 1 from the routing channel in the base enclosure. 9. Remov e the modem connector 2 from the clips in the base enclosure. Re mo v ing the Modem Cable 10. If it is necessary to replace the power connec[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–6 7 5 .2 2 Expr essCar d Asse mbl y 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏ Switch cov er ( Section 5.11 ) ❏ Displa[...]

5–6 8 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 3. Lift the insulation material 1 from the system board to expose the ExpressCard assembly rear scre ws. 4. Remov e the two Phillips PM2.0×4.0 scre ws 2 and the two Phillips PM2.0×8.0 scre ws 3 that secure the ExpressCard assembly to the system board. Re mo v ing the F [...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–6 9 5. T urn the system board right-si de up with the front tow ard you. 6. Remov e the ExpressCard assembly from the system board. Re mo v ing the Expr essCar d Assembly Re verse the abo ve procedure to install the ExpressCard assembly .[...]

5–7 0 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5 .23 F an/Hea t Sink Assembly 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.9 ) ❏ K eyboard ( Section 5.10 ) ❏ Switch cov er ( Section 5.11 ) ❏ Display a[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–7 1 2. T urn the computer upside down with the front to ward you. 3. Disconnect the fan cable from the system board. Disconnect ing the F an Cable[...]

5–7 2 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures ✎ Steps 4 and 5 apply only to computer models using Intel processors. 4. Loosen the four Phillips PM2.0×13.0 scre ws 1 and the Phillips PM2.0×9.0 scre w 2 that secure the fan/heat sink assembly to the system board. 5. Remov e the fan/heat sink assembly 3 from the syst[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–7 3 ✎ Steps 6 and 7 apply only to computer models using AMD processors. 6. Loosen the Phillips PM2.0×9.0 scre w 1 and the four Phillips PM2.0×13.0 scre ws 2 that secure the fan/heat sink assembly to the system board. 7. Remov e the fan/heat sink assembly 3 from the syst[...]

5–7 4 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures ✎ The follo wing note applies only to computer models using Intel processors: The thermal pads should be thoroughly cleaned from the surfaces of the fan/heat sink assembly 1 and 3 , video memory chip 2 , and processor 4 each time the fan/heat sink assembly is remo ved. [...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–7 5 ✎ The follo wing note applies only to computer models using AMD processors: The thermal pads should be thoroughly cleaned from the surfaces of the fan/heat sink assembly 1 and 3 , video memory chip 2 , and processor 4 each time the fan/heat sink assembly is remo ved. [...]

5–7 6 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures ✎ The follo wing note applies only to computer models using Intel processors: The fan/heat sink assembly mounting bracket should be replaced as sho wn in the follo wing illustration when installing the fan/heat sink assembly . The fan/heat sink assembly mounting bracket[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–77 ✎ The follo wing note applies only to computer models using AMD processors: The fan/heat sink assembly mounting bracket should be replaced as sho wn in the follo wing illustration when installing the fan/heat sink assembly . The fan/heat sink assembly mounting bracket [...]

5–7 8 Maintenance and S ervi ce Guide Remo val and Replace ment Pr ocedures 5. 24 P r o c e s s o r 1. Prepare the computer for disassembly ( Section 5.3 ) and remov e the follo wing components: ❏ Hard dri ve ( Section 5.4 ) ❏ Optical dri ve ( Section 5.9 ) Processor Spare P art Number Information Intel Core Duo T7200 (2.00- GHz), use with V3[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–7 9 ❏ K eyboard ( Section 5.10 ) ❏ Switch cov er ( Section 5.11 ) ❏ Display assembly ( Section 5.12 ) ❏ To p c o v e r ( Section 5.13 ) ❏ W ireless switch board ( Section 5.15 ) ❏ Audio/infrared board ( Section 5.17 ) ❏ Bluetooth module ( Section 5.18 ) ❏ US[...]

5–80 Maintenance and Se rvi ce Guide Remo val and Replace ment Pr ocedures 2. T urn the processor locking screw 1 one-half turn counterclockwise until you feel a click. 3. Lift the processor 2 straight up and remov e it. ✎ The gold triangle 3 on the processor should be aligned with the triangle icon 4 embossed on the processor socket when you i[...]

Re mo val and R eplacement Pr ocedur es Maintenance and Se rvi ce Guide 5–8 1 ✎ Steps 4 and 5 apply only to computer models using AMD processors. 4. T urn the processor locking screw 1 one-half turn counterclockwise until you feel a click. 5. Lift the processor 2 straight up and remov e it. ✎ The gold triangle 3 on the processor should be ali[...]

Maintenance and Se rvi ce Guide 6–1 6 Spec if ica tions This chapter provides physical and performance specif ications. Ta b l e 6 - 1 Computer Dimensions Length Width Height (varies front to rear) 33.4 cm 23.7 cm 2.6 to 3.9 cm 13.2 in 9.33 in 1.02 to 1.54 in W eight (v aries by configuration) 2.41 kg 5.31 lb Stand-alone power requirements Operat[...]

6–2 Maintenance and Serv ice Gui de Spe c ifica tion s Shock Operating Nonoperating 125 g, 2 ms, half-sine 200 g, 2 ms, half-sine Random Vibration Operating Nonoperating 0.75 g zero-to-peak, 10 Hz to 500 Hz, 0.25 oct/min s weep rate 1.50 g zero-to-peak, 10 Hz to 500 Hz, 0.5 oct/min s weep rate *Applicable product saf ety standards spec ify ther m[...]

Specific ation s Maintenance and Se rvi ce Guide 6–3 Ta b l e 6 - 2 14.0-inch, WXGA, SV A Display Dimensions Height Width Diagonal 27.94 cm 20.83 cm 35.56 cm 11.0 in 8.2 in 14.0 in Number of colors Up to 16.8 million Contrast ratio 250:1 Brightness 180 nits typical Pixel resolution Pitch Fo r m at Configuration 0.279 × 0.279 mm 1280 × 768 RGB v[...]

6–4 Maintenance and Serv ice Gui de Spe c ifica tion s Ta b l e 6 - 3 Hard Drives 160-GB* 120-GB* Dimensions Height Width We ig h t 9.5 mm 70 mm 102 g 9.5 mm 70 mm 99 g Interface type ATA - 7 ATA - 5 T ransfer rate Synchronous (maximum) Security 150 MB/sec ATA s e c u r i t y 100 MB/sec A T A secur ity Seek times (typical read, including setting)[...]

Specific ation s Maintenance and Se rvi ce Guide 6–5 100-GB* 80-GB* 60-GB* Dimensions Height Width We ig h t 9.5 mm 70 mm 99 g 9.5 mm 70 mm 102 g 9.5 mm 70 mm 99 g Interface type ATA - 5 ATA - 5 ATA - 5 T ransfer rate Synchronous (maximum) Security 100 MB/sec A T A secur ity 100 MB/sec ATA s e c u r i t y 100 MB/sec A T A secur ity Seek times (ty[...]

6–6 Maintenance and Serv ice Gui de Spe c ifica tion s Ta b l e 6 - 4 Primary 6-cell, Li-Ion Battery Dimensions Height Width Depth We ig h t 2.00 cm 9.40 cm 13.40 cm 0.34 kg 0.79 in 3.70 in 5.28 in 0.75 lb Energ y V oltage Amp-hour capacity W att-hour capacity 11.1 V 4.4 Ah 48 Wh T emperature Operating Nonoperating 5°C to 45°C 0°C to 60°C 41?[...]

Specific ation s Maintenance and Se rvi ce Guide 6–7 Ta b l e 6 - 5 D VD/CD-R W Combo Drive Applicable disc Read: D VD-R, D VD-RW , D VD-ROM (D VD-5, D VD-9, D VD-10, DV D - 1 8 ) , CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F orm 1 and 2) CD-I ready (Mode 2, F orm 1 and 2) CD-R, CD-R W Photo CD (single and multi sess ion) CD-Br[...]

6–8 Maintenance and Serv ice Gui de Spe c ifica tion s Disc thickness 1.2 mm (0.047 in) T rack pitch 0.74 µm Access time CD media D VD media Random Full stroke < 110 ms < 210 ms < 130 ms < 225 ms A udio output level Line-out, 0.7 V rms Cache buff er 2 MB Data transfer rate CD-R (24X) CD-R W (10X) CD-ROM (24X) DV D ( 8 X ) Multiword D[...]

Specific ation s Maintenance and Se rvi ce Guide 6–9 Ta b l e 6 - 6 DV D ± RW / R a n d CD-R W Double-Lay er Combo Drive Applicable disc Read: D VD-R, D VD-RW , D VD-ROM (D VD-5, D VD-9, D VD-10, DV D - 1 8 ) , CD-ROM (Mode 1 and 2) CD Digital A udio CD-XA ready (Mode 2, F orm 1 and 2) CD-I ready (Mode 2, F orm 1 and 2) CD-R, CD-R W Photo CD (si[...]

6–1 0 Maintenance and S ervi ce Guide Spe c ifica tion s Disc thickness 1.2 mm (0.047 in) T rack pitch 0.74 µm Access time CD media D VD media Random Full stroke < 175 ms < 285 ms < 230 ms < 335 ms A udio output level A udio-out, 0.7 Vr ms Cache buff er 2 MB Data transfer rate CD-R (16X) CD-R W (8X) CD-ROM (24X) DV D ( 8 X ) D VD-R ([...]

Specific ation s Maintenance and Se rvi ce Guide 6–1 1 Ta b l e 6 - 7 System DMA Hard ware DMA System Function DMA0 Not applicable DMA1 Not applicable DMA2 Not applicable DMA3 Not applicable DMA4 Direct memor y access controller DMA5 A vailab le for ExpressCard DMA6 Not assigned DMA7 Not assigned[...]

6–1 2 Maintenance and S ervi ce Guide Spe c ifica tion s Ta b l e 6 - 8 System Interrupts Hard ware IRQ System Function IRQ0 System timer IRQ1 Quick Launch b uttons IRQ2 Cascaded IRQ3 USB2 Enhanced Ho st Controller—24CD IRQ4 COM1 IRQ5* Cone xant A C—Link A udio SMBus Controller—24C3 Data F ax Modem with Smar tCP IRQ6 Diskette drive IRQ7* P [...]

Specific ation s Maintenance and Se rvi ce Guide 6–1 3 Hard ware IRQ System Function IRQ12 Synaptics PS/2 port pointing device IRQ13 Numeric data processor IRQ14 Primar y IDE channel IRQ15 Secondary IDE channel IRQ17 Cone xant AC -Link A udio IRQ17 Soft V90 Data F ax Modem with Smar tCP IRQ17 A Ti Mobility Radeon Xpress 200 Series IRQ19 Standard [...]

6–1 4 Maintenance and S ervi ce Guide Spe c ifica tion s Ta b l e 6 - 9 System I/O Addresses I/O Address (he x ) System Function (shipping configuration) 0x00000000-0x00000CF7 PCI bus 0x00000000-0x00000CF7 Direc t memor y access controller 0x00000020-0x00000021 Program mab le interr upt controller 0x0000002E-0x0000002F Sy stem board resources 0x0[...]

Specific ation s Maintenance and Se rvi ce Guide 6–1 5 I/O Address (he x ) System Function (shipping configuration) 0x000001F0-0x000001F7 Primary IDE Channel 0x00000220-0x0000022F System board resources 0x00000274-0x00000277 ISAPNP Read Data P or t 0x00000279-0x00000279 ISAPNP Read Data P or t 0x00000280-0x00000293 System board resources 0x000003[...]

6–1 6 Maintenance and S ervi ce Guide Spe c ifica tion s I/O Address (he x ) System Function (shipping configuration) 0x00000C6F-0x00000C6F System board resources 0x00000CD4-0x00000CD5 System board resources 0x00000CD6-0x00000CD7 System board resources 0x00000CD8-0x00000CDF System board resources 0x00000D00-0x0000FFFF PCI bus 0x00000F40-0x00000F4[...]

Specific ation s Maintenance and Se rvi ce Guide 6–1 7 T able 6-10 System Memory Map Memory Map Address (he x) System Function (shipping configuration) 0xD4100000-0xD41FFFFF PCI standard PCI-to-PCI bridge 0xD4100000-0xD41FFFFF A TI MOBILITY RADEON Xpress 200 Ser ies 0xD8000000-0xDBFFFFFF PCI standard PCI-to-PCI br idge 0xD8000000-0xDBFFFFFF A TI [...]

6–1 8 Maintenance and S ervi ce Guide Spe c ifica tion s Memory Map Address (he x) System Function (shipping configuration) 0xF2C00000-0xF6BFFFFF T e xas Instru ments PCIxx21/x515 Cardbus Controller 0xD4206000-0xD4207FFF T exas Inst ruments PCIxx21 Integrated FlashMedia Controller 0xD4209000-0xD42090FF SD A Standard Compliant SD Host Controller 0[...]

Maintenance and Se rvi ce Guide A–1 A Sc r e w List ing This appendix provides specif ication and reference information for the scre ws used in the computer . All screws listed in this appendix are av ailable in the Screw Kit, spare part number 417109-001, and the Display Scre w Kit, spare part number 417105-001. Phillips P M3 . 0×3 .0 Sc re w L[...]

A–2 Maintenance and Serv ice Gui de Scr ew L istin g Black Phillip s P M2 . 0×5 .0 C apti v e Sc re w L ocations Ta b l e A - 2 Black Phillips PM2.0×5.0 Captive Scre w Color Qty . Length Thread Head Width Black 5 5.0 mm 2.0 mm 4.0 mm Where used: 1 T wo screws that secure the hard driv e cover to the computer (scre ws are captured on the cov er [...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–3 Black Phillip s P M2 .5×5 . 0 Sc re w Lo cations Ta b l e A - 3 Black Phillips PM2.5×5.0 Scre w Color Qty . Length Thread Head Width Black 13 5.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the hard driv e to the computer (documented in Section 5.4 ) mm[...]

A–4 Maintenance and Serv ice Gui de Scr ew L istin g Black Phillip s P M2 .5×5 . 0 Sc re w Lo cations Ta b l e A - 3 Black Phillips PM2.5×5.0 Scre w (Continued) Color Qty . Length Thread Head Width Black 13 5.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the displa y inv er t er brac ket to the display assemb ly (documented in Section 5.1[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–5 Black Phillip s P M2 .5×5 . 0 Sc re w Lo cations Ta b l e A - 3 Black Phillips PM2.5×5.0 Scre w (Continued) Color Qty . Length Thread Head Width Black 13 5.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the displa y inv er ter to the displa y in verter brack et (documented in Section 5.1[...]

A–6 Maintenance and Serv ice Gui de Scr ew L istin g Black Phillip s P M2 .5×5 . 0 Sc re w Lo cations Ta b l e A - 3 Black Phillips PM2.5×5.0 Scre w (Continued) - Color Qty . Length Thread Head Width Black 13 5.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the displa y hinges to the display assemb ly (documented in Section 5.12 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–7 Black Phillip s P M2 .5×5 . 0 Sc r ew Locati on Ta b l e A - 3 Black Phillips PM2.5×5.0 Scre w (Continued) Color Qty . Length Thread Head Width Black 13 5.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the displa y lid sw itch module to the displa y enclosure (documented in Section 5.1[...]

A–8 Maintenance and Serv ice Gui de Scr ew L istin g Black Phillip s P M2 .5×5 . 0 Sc re w Lo cations Ta b l e A - 3 Black Phillips PM2.5×5.0 Scre w (Continued) Color Qty . Length Thread Head Width Black 13 5.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the wireless antenn a tr ansceivers to the displa y enclosure (documented in Section [...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–9 Black Phillip s P M2 .5×5 . 0 Sc re w Lo cations Ta b l e A - 3 Black Phillips PM2.5×5.0 Scre w (Continued) Color Qty . Length Thread Head Width Black 13 5.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the system boar d to the computer (documented in Section 5.21 ) mm[...]

A–1 0 Maintenance and Servi ce Guide Scr ew L istin g Phillips P M2 .0×3 . 0 Sc r e w Locations Ta b l e A - 4 Phillips PM2.0×3.0 Screw Color Qty . Length Thread Head Width Black 15 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the Mini Card mo dule to the computer (documented in Section 5.8 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–1 1 Phillips P M2 .0×3 . 0 Sc r e w Locations Ta b l e A - 4 Phillips PM2.0×3.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the optical driv e brac ket to the optical driv e (documented in Section 5.9 ) mm[...]

A–1 2 Maintenance and Servi ce Guide Scr ew L istin g Phillips P M2 .0×3 . 0 Sc r e w Locations Ta b l e A - 4 Phillips PM2.0×3.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the po wer b utton bo ard to the s witch cov er (documented in Section 5.11 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–1 3 Phillips P M2 .0×3 . 0 Sc r e w Locations Ta b l e A - 4 Phillips PM2.0×3.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the top co v e r to the computer (documented in Section 5.13 ) mm[...]

A–1 4 Maintenance and S ervi ce Guide Scr ew L istin g Phillips P M2 .0×3 . 0 Sc r e w Locations Ta b l e A - 4 Phillips PM2.0×3.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 3.0 mm 2.0 mm 4.0 mm Where used: 5 screws that secure the T ouchP ad to the top cover (documented in Section 5.14 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–1 5 Phillips P M2 .0×3 . 0 Sc r e w Locations Ta b l e A - 4 Phillips PM2.0×3.0 Screw (Continued) Color Qty . Length Thread Head Width Black 15 3.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the wireless s witch board to the computer (documented in Section 5.15 ) mm[...]

A–1 6 Maintenance and Servi ce Guide Scr ew L istin g Phillips P M2 .5×7 .0 S cr ew L ocation Ta b l e A - 5 Phillips PM2.5×7.0 Screw Color Qty . Length Thread Head Width Black 18 7.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the optical dr iv e to the computer (documented in Section 5.9 mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–1 7 Phillips P M2 .5×7 .0 S cr ew L ocations Ta b l e A - 5 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length Thread Head Width Black 18 7.0 mm 2.5 mm 4.0 mm Where used: 3 screws that secure the k eyboard to the computer (documented in Section 5.10 ) mm[...]

A–1 8 Maintenance and Servi ce Guide Scr ew L istin g Phillips P M2 .5×7 .0 S cr ew L ocations Ta b l e A - 5 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length Thread Head Width Black 18 7.0 mm 2.5 mm 4.0 mm Where used: 5 screws that secure the displa y assemb ly to the computer (documented in Section 5.12 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–1 9 Phillips P M2 .5×7 .0 S cr ew L ocations Ta b l e A - 5 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length Thread Head Width Black 18 7.0 mm 2.5 mm 4.0 mm Where used: 8 screws that secure the displa y bezel to the displa y assembly (documented in Section 5.12 ) mm[...]

A–20 Maintenance and S ervi ce Guide Scr ew L istin g Phillips P M2 .5×7 .0 S cr ew L ocation Ta b l e A - 5 Phillips PM2.5×7.0 Screw (Continued) Color Qty . Length Thread Head Width Black 18 7.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the top co v e r to the computer (documented in Section 5.13 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–2 1 Phillips P M2 .5×9 . 0 Sc r ew L ocations Ta b l e A - 6 Phillips PM2.5×9.0 Screw Color Qty . Length Thread Head Width Black 10 9.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the s witch co ver to the computer (documented in Section 5.11 ) mm[...]

A–2 2 Maint enance and Serv ice Gui de Scr ew L istin g Phillips P M2 .5×9 . 0 Sc r ew L ocation Ta b l e A - 6 Phillips PM2.5×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 10 9.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the displa y asse mbly to the computer (documented in Section 5.12 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–2 3 Phillips P M2 .5×9 . 0 Sc r ew L ocations Ta b l e A - 6 Phillips PM2.5×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 10 9.0 mm 2.5 mm 4.0 mm Where used: 6 screws that secure the top co v e r to the computer (documented in Section 5.13 ) mm[...]

A–2 4 Maintenance and Servi ce Guide Scr ew L istin g Phillips P M2 .5×9 . 0 Sc r ew L ocation Ta b l e A - 6 Phillips PM2.5×9.0 Screw (Continued) Color Qty . Length Thread Head Width Black 10 9.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the top co v e r to the computer (documented in Section 5.13 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–2 5 Silv er Phillips P M2 .5×5 . 0 Sc r e w L ocation Ta b l e A - 7 Silver Phillips PM2.5×5.0 Screw Color Qty . Length Thread Head Width Silver 3 5.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the s witch co ver to the computer (documented in Section 5.11 ) mm[...]

A–2 6 Maintenance and Servi ce Guide Scr ew L istin g Silv er Phillips P M2 .5×5 . 0 Sc r e w L ocation Ta b l e A - 7 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 3 5.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the audio/infr ar ed board to the computer (documented in Section 5.17 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–2 7 Silv er Phillips P M2 .5×5 . 0 Sc r e w L ocation Ta b l e A - 7 Silver Phillips PM2.5×5.0 Screw (Continued) Color Qty . Length Thread Head Width Silver 3 5.0 mm 2.5 mm 4.0 mm Where used: One screw that secures the USB boar d to the computer (documented in Section 5.19 ) mm[...]

A–2 8 Maintenance and Servi ce Guide Scr ew L istin g Phillips P M2 .0×4. 0 Scr ew L ocations Ta b l e A - 8 Phillips PM2.0×4.0 Screw Color Qty . Length Thread Head Width Black 10 4.0 mm 2.5 mm 4.0 mm Where used: 4 screws that secure the top co v e r to the computer (documented in Section 5.13 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–29 Phillips P M2 .0×4. 0 Scr ew L ocations Ta b l e A - 8 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 10 4.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the top co v e r to the computer (documented in Section 5.13 ) mm[...]

A–30 Maintenance and Se rvi ce Guide Scr ew L istin g Phillips P M2 .0×4. 0 Scr ew L ocations Ta b l e A - 8 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 10 4.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the modem module to the computer (documented in Section 5.16 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–3 1 Phillips P M2 .0×4. 0 Scr ew L ocations Ta b l e A - 8 Phillips PM2.0×4.0 Screw (Continued) Color Qty . Length Thread Head Width Black 10 4.0 mm 2.5 mm 4.0 mm Where used: 2 screws that secure the ExpressC ard assemb ly to the system board (documented in Section 5.22 ) mm[...]

A–3 2 Maintenance and Servi ce Guide Scr ew L istin g Phillips P M2 .0×2 .0 S cr ew L ocations Ta b l e A - 9 Phillips PM2.0×2.0 Screw Color Qty . Length Thread Head Width Silver 2 2.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the T ouchP ad board to the T ouchP ad bracket (documented in Section 5.14 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–33 Phillips P M2 .5×4. 0 Scr ew L ocations T able A-10 Phillips PM2.5×4.0 Screw Color Qty . Length Thread Head Width Black 4 4.0 mm 2.5 mm 4.0 mm Where used: 4 screws that secure the speak er assemb ly to the computer (documented in Section 5.20 ) mm[...]

A–34 Maintenance and Se rvi ce Guide Scr ew L istin g Phillips P M2 .0×8. 0 Scr ew L ocations T able A-11 Phillips PM2.0×8.0 Screw Color Qty . Length Thread Head Width Black 2 8.0 mm 2.0 mm 4.0 mm Where used: 2 screws that secure the ExpressC ard assemb ly to the system board (documented in Section 5.22 ) mm[...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–35 Phillips P M2 .0×1 3 . 0 Spring-L oaded Shoulder Sc re w Locati ons T able A-12 Phillips PM2.0×13.0 Spring-Loaded Shoulder Screw Color Qty . Length Thread Head Width Silver 8 13.0 mm 2.0 mm 4.0 mm Where used: 4 screws that secure the f an/heat sink assembly to the system board on computer mo[...]

A–3 6 Mainte nance and Serv ice Gui de Scr ew L istin g Phillips P M2 .0×1 3 . 0 Spring-L oaded Shoulder Sc re w Locati ons T able A-12 Phillips PM2.0×13.0 Spring-Loaded Shoulder Screw (Continued) Color Qty . Length Thread Head Width Silver 8 13.0 mm 2.0 mm 4.0 mm Where used: 4 screws that secure the f an/heat sink assembly to the system board [...]

Scr ew L istin g Maintenance and Se rvi ce Guide A–3 7 Phillips P M2 .0×9 . 0 Spr ing-Loaded Shoulder Sc r ew Locati on T able A-13 Phillips PM2.0×9.0 Spring-Loaded Shoulder Screw Color Qty . Length Thread Head Width Silver 2 9.0 mm 2.0 mm 4.0 mm Where used: One screw that secures the f an/heat si nk assembly to the system board on computer mod[...]

A–38 Maintenance and Se rvi ce Guide Scr ew L istin g Phillips P M2 .0×9 . 0 Spr ing-Loaded Shoulder Sc r ew Locati on T able A-13 Phillips PM2.0×9.0 Spring-Loaded Shoulder Screw (Continued) Color Qty . Length Thread Head Width Silver 2 9.0 mm 2.0 mm 4.0 mm Where used: One screw that secures the f an/heat si nk assembly to the system board on c[...]

Maintenance and Se rvi ce Guide B–1 B B ac k u p and Reco v er y in Win dow s XP Rec o verin g Sy s te m In forma t ion T ools provided b y the operating system and PC Reco very software are designed to help you with the follo wing tasks for safeguarding your information and restoring it in case of a system failure: ■ Backing up your informatio[...]

B–2 Maintenance and Serv ice Gui de Back up and Reco very in Windo ws XP Back in g Up Y ou r In f or mat io n When to Ba ck Up ■ On a regularly scheduled basis ✎ Set reminders to back up your information periodically . ■ Before the computer is repaired or restored ■ Before you add or modify hardware or software Back up Sug gesti ons ■ C[...]

Back up and Reco very in Windo ws XP Maintenance and Se rvi ce Guide B–3 Us ing S yst em R e sto r e P oints When you back up your system, you are creating a system restore point. A system restore point allo ws you to sav e and name a snapshot of your hard dri ve at a specif ic point in time. Y ou can then recov er back to that point if you want [...]

B–4 Maintenance and Serv ice Gui de Back up and Reco very in Windo ws XP Restoring to a Pre vious Date an d Time T o re vert to a restore point (creat ed at a pre vious date and time), when the computer was functioning optimally: 1. Select Start > Help and Support > S ystem Restore . The System Restore windo w opens. 2. Click Restore my com[...]

Back up and Reco very in Windo ws XP Maintenance and Se rvi ce Guide B–5 ■ Number each disc before inserting it into the computer optical dri ve. ■ If necessary , you can exit the program before you hav e finished creating the reco very discs. The next time you open PC Recov ery Disc Creator , you will be prompted to continue the disc creatio[...]

B–6 Maintenance and Serv ice Gui de Back up and Reco very in Windo ws XP Rein sta lli ng S of t w are P rogram s an d Drivers If a program or dri ver preinstalled at the f actory is accidentally erased or is damaged, the Application and Dri ver Reco very tool allo ws you to reinstall it. ✎ Software not provided with this computer must be reinst[...]

Back up and Reco very in Windo ws XP Maintenance and Se rvi ce Guide B–7 2. Select Start > All Programs > System Reco very > A pplication and Driv er Recovery . The Application and Dri ver Reco very tool opens. 3. Select A pplication Installation or Driver Installation , and then click Next . 4. Follo w the on-screen instructions to comp[...]

B–8 Maintenance and Serv ice Gui de Back up and Reco very in Windo ws XP Reco vering from the Reco very Disc s T o restore the system from the recov ery discs: 1. Back up all personal files. 2. Insert the first reco very disc into the optical driv e and restart the computer . 3. Follo w the on-screen instructions. Reco vering from the P ar tition[...]

Back up and Reco very in Windo ws XP Maintenance and Se rvi ce Guide B–9 If you want to perform a destructive reco very: ✎ A destructi ve reco very formats the hard dri ve and restores the computer to its factory state. Select this option only as a last resort. a. Click Adv anced Options on the System Recov ery screen. b. S e l e c t Destructiv[...]

B–1 0 Maintenance and S ervi ce Guide Back up and Reco very in Windo ws XP 4. Click OK . 5. At the System Recov ery screen, click Advanced Options . 6. Select Delete Recove ry Partition (not r ecommended) and follo w the on-screen instructions. Upda ting Reinstall ed Soft w are After you perform a system recov ery , connect to the Internet to upd[...]

Maintenance and Se rvi ce Guide C–1 C B ac k u p and Reco v er y in Win do w s Vis t a Rec o verin g Sy s te m In forma t ion T ools provided b y the operating system and Recov ery Manager software are designed to help you with the follo wing tasks for safeguarding your information and restoring it in case of a system fai lure : ■ Back up your [...]

C–2 Maintenance and S ervi ce Guide Back up and Reco very in Windo ws Vis ta Back i ng up Y ou r I nf or mat io n When to Ba ck Up ■ On a regularly scheduled basis. ✎ Set reminders to back up your information periodically . ■ Before the computer is repaired or restored. ■ Before you add or modify hardware or software. Back up Sug gesti on[...]

Back up and Reco very in Windo ws Vis ta Maintenance and Se rvi ce Guide C–3 Us ing S yst em R e sto r e P oints When you back up your system, you are creating a system restore point. A system restore point allo ws you to sav e and name a snapshot of your hard dri ve at a specif ic point in time. Y ou can then recov er back to that point if you w[...]

C–4 Maintenance and S ervi ce Guide Back up and Reco very in Windo ws Vis ta Restoring to a Pre vious Date an d Time T o re vert to a restore point (creat ed at a pre vious date and time), when the computer was functioning optimally , follow these steps: 1. Select Start > Contr ol Panel > System and Maintenance > System . 2. In the left [...]

Back up and Reco very in Windo ws Vis ta Maintenance and Se rvi ce Guide C–5 ■ If necessary , you can exit the program before you hav e finished creating the reco very discs. The next time you open Recov ery Manager , you will be prompted to continue the disc creation process. T o create a set of recov ery discs: 1. Select Start > All Progra[...]

C–6 Maintenance and S ervi ce Guide Back up and Reco very in Windo ws Vis ta ■ In all cases, if a program has been deleted from your computer , the reinstallation process reinstalls the program or utility to the factory image b ut cannot restore your personal settings. Reinstalling Preinstalled Programs and Driv ers 1. Remov e the program or dr[...]

Back up and Reco very in Windo ws Vis ta Maintenance and Se rvi ce Guide C–7 P erforming a Reco v e ry Recov ery Manager software allo ws you to repair or restore the system if you experience system f ailure or instability . Recovery Manager works from reco very discs that you create or from a dedicated recov ery partition on the hard dri ve. ✎[...]

C–8 Maintenance and S ervi ce Guide Back up and Reco very in Windo ws Vis ta ❏ Restart the computer and press f11 while the “Press <F11> for recov ery” message is displayed on the screen. Then select Recove ry Manager . Recov ery Manager opens. 2. Click Advanced Options . 3. Click System reco very , and then click Next . 4. Follo w th[...]

Back up and Reco very in Windo ws Vis ta Maintenance and Se rvi ce Guide C–9 Upda ting Reinstall ed Soft w are After you perform a system recov ery , connect to the Internet to update all reinstalled software. T o access update links for th e operating system and other software pro vided on your computer: » Select Start > Help and Support . T[...]

Maintenance and Se rvi ce Guide D–1 D Disp l a y C omponen t Rec y c ling Å WA R N I N G : The backligh t contains mer cury . Cauti on should be ex erc ised when r emov ing and handling the backlight to a voi d damaging this component and cau sing e xposur e to the merc ury . Ä CAUT ION: The pr ocedures in this appendi x can result in damage t [...]

D–2 Maintenance and S ervi ce Guide Display C omponent R ecy cling This appendix provides disassembl y instructions for the display assembly . The display assembly must be disassembled to gain access to the backlight 1 and the LCD panel 2 . ✎ Disassembly procedures dif fer from one display assembly to another . The procedures provided in this a[...]

Display C omponent Recy cling Maintenance and Se rvi ce Guide D–3 Perform the follo wing steps to disassemble the display assembly: 1. Remov e all scre w covers 1 and scre ws 2 that secure the display bezel to the display assembly . Re mo v ing the Displa y Beze l Sc r ew Co ver s and Sc r ews[...]

D–4 Maintenance and S ervi ce Guide Display C omponent R ecy cling 2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel until the bezel disengages fro m the display assembly . 3. Remov e the display bezel 3 . Re mo v ing the Displa y Beze l[...]

Display C omponent Recy cling Maintenance and Se rvi ce Guide D–5 4. Disconnect all LCD panel cables 1 from the display in verter board and remov e the in verter board 2 . Re mo v ing the Displa y Inv erter Boar d[...]

D–6 Maintenance and S ervi ce Guide Display C omponent R ecy cling 5. Remov e all scre ws 1 that secure the LCD panel to the display enclosure. 6. Remov e the LCD panel 2 from the display enclosure. Re mo v ing the L CD P anel[...]

Display C omponent Recy cling Maintenance and Se rvi ce Guide D–7 7. T urn the LCD panel upside down. 8. Remov e all scre ws that secure the LCD panel frame to the LCD panel. Re mo v ing the L CD P anel Fr ame Scr ew s[...]

D–8 Maintenance and S ervi ce Guide Display C omponent R ecy cling 9. Use a sharp-edged tool to cut the tape 1 that secures the side of the LCD panel to the LCD panel frame. 10. Remov e the LCD panel frame 2 from the display panel. Re mo v ing the L CD P anel Fr ame[...]

Display C omponent Recy cling Maintenance and Se rvi ce Guide D–9 11. Remov e the scre ws 1 that secure the backlight cover to the LCD panel. 12. Lift the top edge of the backlight cov er 2 and swing it forward. 13. Remov e the backlight co ver . Re mo v ing the Bac klight C o v er[...]

D–1 0 Maintenance and Se rvi ce Guide Display C omponent R ecy cling 14. T urn the LCD panel right-side up. 15. Remov e the backlight cables 1 from the clip 2 in the LCD panel. Re leasing the Bac klight Ca bles[...]

Display C omponent Recy cling Maintenance and Se rvi ce Guide D–1 1 16. T urn the LCD panel upside down. 17. Remov e the backlight frame from the LCD panel. Re mo v ing the Bac klight F rame[...]

D–1 2 Maintenance and Servi ce Guide Display C omponent R ecy cling Å WA R N I N G : The backligh t contains mer cury . Cauti on should be ex erc ised when r emov ing and handling the backlight to a voi d damaging this component and cau sing e xposur e to the merc ury . 18. Slide the backlight out of the backlight frame. Re mo v ing the Bac klig[...]

Display C omponent Recy cling Maintenance and Se rvi ce Guide D–1 3 19. Disconnect the display cable 1 from the LCD panel. 20. Remov e the scre ws 2 that secure the LCD panel to the LCD rear panel. 21. Release the LCD panel 3 from the LCD rear panel. 22. Release the tape 4 that secures the LCD panel to the LCD rear panel. Re leasing the L CD P an[...]

D–1 4 Maintenance and Servi ce Guide Display C omponent R ecy cling 23. Remov e the LCD panel. Re mo v ing the L CD P anel 24. Recycle the backlight and LCD panel.[...]

Maintenance and Se rvi ce Guide E–1 E Conn ec tor P in A ssignm ents Ta b l e E - 1 Universal Serial Bus Pin Signal P in Signal 1 +5 VDC 3 Data + 2 Data – 4 Ground[...]

E–2 Maintenance and Serv ice Gui de Connec tor P in Assignments Ta b l e E - 2 RJ-45 (Network) Pin Signal P in Signal 1 T ransmit + 5 Unused 2 T ransmit – 6 Receive – 3 Receive + 7 Unused 4 Unused 8 Unused[...]

Connec tor P in Assignments Maintenance and Se rvi ce Guide E–3 Ta b l e E - 3 S-Video-Out Pin Signal P in Signal 1 TV -Ground 5 TV -CD 2 TV -CVBS 6 TV -Ground 3 TV -Ground 7 TV -YD 4 TV -Ground[...]

E–4 Maintenance and Serv ice Gui de Connec tor P in Assignments Ta b l e E - 4 External Monitor Pin Signal P in Signal 1 Red analog 9 +5 VDC 2 Green analog 10 Ground 3 Blue analog 11 Monitor detect 4 Not connected 12 DDC 2B data 5 Ground 13 Horizontal sync 6 Ground analog 14 V e rtical sync 7 Ground analog 15 DDC 2B clock 8 Ground analog[...]

Connec tor P in Assignments Maintenance and Se rvi ce Guide E–5 Ta b l e E - 5 RJ-11 (Modem) Pin Signal P in Signal 1 Unused 4 Unused 2T i p 5U n u s e d 3 Ring 6 Unused[...]

E–6 Maintenance and Serv ice Gui de Connec tor P in Assignments Ta b l e E - 6 A udio-In (Micr ophone) Pin Signal P in Signal 1 Audio signal in 3 Ground 2 Audio signal in Ta b l e E - 7 A udio-Out (Headphone) Pin Signal P in Signal 1 Audio out, left channel 3 Ground 2 Audio out, right channel[...]

Maintenance and Se rvi ce Guide F–1 F P o w er C ord Set Requiremen ts 3-Con ductor P o wer Cord Set The wide range input feature of the computer permits it to operate from any line v oltage from 100 to 120 or 220 to 240 volts A C. The po wer cord set included with the computer meets the requirements for use in the country or region where the equ[...]

F–2 Maintenance and Serv ice Gui de P ow er Cord Set R equirements Gen eral R eq uirements The requirements listed belo w are applicable to all countries or regions. ■ The length of the po wer cord set must be at least 1.5 m (5.0 ft) and a maximum of 2.0 m (6.5 ft). ■ All po wer cord sets must be approv ed by an acceptable accredited agency r[...]

P o wer C or d Set Requir ements Maintenance and Se rvi ce Guide F–3 Countr y/Region -Spec ifi c R equirements 3-Conductor P ower Cord Set Requirements Country/Region Accredited Agenc y Applicab le Note Number A ustralia EANSW 1 Au st r i a OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMK O 1 Finland FIMK O 1 F rance UTE 1 Germany VDE 1 Italy IMQ 1[...]

F–4 Maintenance and Serv ice Gui de P ow er Cord Set R equirements Ko r e a E K 4 The Netherlands K EMA 1 Norwa y NEMK O 1 P eople’ s Republic of China CCC 5 Sweden SEMK O 1 Switzerland SEV 1 T aiwan BSMI 4 United Kingdom BSI 1 United States UL 2 ✎ NOTES: 1. The fle xible cord m ust be <HAR> T ype HO5VV -F , 3-conductor , 1.0 mm² condu[...]

Maintenance and Se rvi ce Guide Index–1 Ind e x 1394 port 1–10 A AC adapter, spare part numbers 3–24 , 3–29 analog TV tuner, spare part number 3–24 , 3–28 arrow keys 1–12 audio troubleshooting 2–33 audio/infrared board removal 5–54 spare part number 3–7 , 3–34 , 5–54 audio-in (microphone) jack location 1–7 pin assignments [...]

Index–2 Mainte nance and Servi ce Guide Index keyboard 1–11 left-side 1–9 rear 1–9 right-side 1–8 top 1–13 , 1–15 composite S-Video and audio input cable, spare part number 3–24 , 3–27 computer feet, locations 5–11 Computer Setup Advanced Menu 2–9 , 2–16 File Menu 2–7 , 2–14 Security Menu 2–7 , 2–14 Tools Menu 2–8 [...]

Index Maintenance and Se rvi ce Guide Index–3 docking device, spare part number 3–24 , 3–33 docking device, troubleshooting 2–26 drives, preventing damage 4–3 DVB-T TV tuner antenna, spare part number 3–24 , 3–29 DVB-T TV tuner, spare part number 3–24 , 3–29 DVD/CD-RW Combo Drive OS loading problems 2–32 precautions 4–3 remova[...]

Index–4 Mainte nance and Servi ce Guide Index nonfunctioning keyboard 2–36 nonfunctioning pointing device 2–37 fn key 1–12 front components 1–7 function keys 1–12 G grounding equipment and methods 4–7 H hard drive OS loading problems 2–28 precautions 4–3 removal 5–6 spare part numbers 3–13 , 3–21 , 3–31 , 3–34 , 3–38 ,[...]

Index Maintenance and Se rvi ce Guide Index–5 Memory Reader light 1–10 microphone jack location 1–7 pin assignments D–6 microphone, removal 5–41 Mini Card compartment 1–18 Mini Card compartment cover illustrated 3–22 removal 5–17 Mini Card module removal 5–15 spare part numbers 3–15 , 3–17 , 3–28 , 3–29 , 5–15 Mini Modul[...]

Index–6 Mainte nance and Servi ce Guide Index power cord set requirements E–2 spare part numbers 3–26 , 3–27 power management features 1–6 power, troubleshooting 2–20 processor removal 5–78 spare part number 3–36 spare part numbers 3–9 , 3–30 , 3–33 , 3–34 , 3–35 , 3–38 , 5–78 R rear components 1–9 recovering from pa[...]

Index Maintenance and Se rvi ce Guide Index–7 DVD/CD-RW Combo Drive 6–7 DVD±RW/R and CD-RW Combo Drive 6–9 hard drive 6–4 I/O addresses 6–14 interrupts 6–12 optical drive 6–7 system DMA 6–11 static shielding materials 4–8 S-Video-out jack location 1–10 pin assignments D–3 switch cover removal 5–25 spare part numbers 3–3 ,[...]

Index–8 Mainte nance and Servi ce Guide Index U Universal Serial Bus (USB) connector location 1–8 , 1–10 pin assignments D–1 unknown password 1–5 USB board removal 5–58 spare part number 3–11 , 3–32 , 5–58 USB board cable, illustrated 3–23 USB digital drive, spare part number 3–21 , 3–27 USB infrared receiver, spare part num[...]