HP (Hewlett-Packard) workstation инструкция обслуживания

Model 748 W orkstation Owner ’ s Guide This guide contains install ation instructi ons HP Part No. A451 1-9060 7 Ed itio n E11 99 Printed in U.S.A.[...]

 Hewlett- Packard Co. 1996, 1997 , 1999 Printi ng History First Pr inting: December 1996 Latest Printing: November 1999 UNIX is a r egistere d trademar k of The Open Gr oup. NOTICE The infor mation contai ned in th is docu ment is subjec t to chang e withou t notice. HEWLETT - P ACKARD MAKES NO W ARRANTY OF ANY KIND WITH REGARD TO THIS MA TERIAL[...]

Contents iii Pre face Audience xii Release Document(s) xii Related Manual s xii Revi sion Histo ry xii i Documentati on Conven tions xiv Questions, S uggestions , or Prob lems xv 1 Pro duct Desc ription The Model 748 Ruggedized W o rkstation 1-3 Features 1-5 Model 748 P hysical Dimens ions and P ower Requi rements 1-6 Board Co mputer Co nfigurat io[...]

iv Contents Installing VME Accessory Card Hardware 3-6 Installatio n Proce dures 3-6 For More Information 3-7 4 EISA Card Inst allatio n EISA Accessory Card Configuration Files 4-3 Hardware Installation 4-4 T ools Re quire d 4-4 Procedure 4 -4 5 PC I C ard Insta ll ati on Hardware Installation 5-3 6 Install ing and Confi guring Mas s S torage Devic[...]

Contents v 7 Using Mass S torage Devi ces Using your CD-ROM Drive 7-2 CD-ROM Driv e and CD-ROM Medi a Descriptions 7-3 CD-ROM Drive 7-3 CD-ROM Media 7-4 Operating the CD-ROM Drive 7-6 Loading an d Unloading a CD-ROM in the Disc Tray 7-6 V e rifying the CD-ROM Driv e Operation 7 -9 Mountin g and Un moun tin g a CD-R OM Dis c 7- 1 1 Mounting a CD-ROM[...]

vi Contents Using th e Floppy Diskett e 7-28 Setting the W rite-Protect T ab on a Disk ette 7-28 Inserti ng and Removi ng a D iskett e 7-2 9 Operatin g the Fl oppy Dri ve 7-30 V erifying the F loppy Dri ve Configu ration 7-30 Using D evice F iles 7-30 Formattin g a New Diskette 7-31 T ransferring Data T o and From a F lopp y Diskette 7 -31 Saving F[...]

Contents vii Dealing wit h Netwo rk Failur es 10-1 1 A Safety an d Regulatory S tatements Declaration of Conformity A-3 Special V ideo Configuration S tatements A-4 For EN55 022 or C ISPR 22 Applic a tio ns : A-4 For FCC Applications: A-4 Emissi ons Regu lations A-5 Federal Communications Commission (FCC) A-5 VCCI Class A ITE A-5 A-5 Emissions R eg[...]

viii Contents Figur es Model 748 F ront View 1-3 Model 748 R ear View 1-4 Boar d C omput er Fro nt Pane l 1-4 Model 74 4 Memory Sl ots 2- 4 Installing a VME Card 3-6 Removing the EISA Tray 4-5 Card Reta in er Screw 4- 6 Sliding the EISA Module Back into the VMEbus Chassi s 4-7 Remo vi ng the P CI Mod ule 5- 4 Card Retainer Captive Screw 5-5 Removi [...]

Contents ix Ta b l e s Conver si ons to Sta n dard Cab ling 1-7 Model 744/ 132L Memory C ard Cu rrent Usage Work sheet 2-5 Model 744/ 165L Memory C ard Cu rrent Usage Work sheet 2-5 Model 744 C urrent Req uirements Work sheet 2-7 Model 743 C urrent Req uirements Work sheet 2-8 Internal Device Current R equirements 2-9 Upper Power Supply Current B u[...]

x Contents[...]

xi Preface[...]

xii This owner’ s guide describ es how to inst all and us e the Mode l 748 wor ksta- tion. Audience This gui de is int ended f or Model 748 wor kstat ion us ers. Release Documen t(s) Pleas e refe r t o the Release Document (s) y ou receiv ed with your syste m or system software for a dditional info rmatio n that we m ay not have been ab le to inc[...]

xiii Revision History The revi sion hi story fo r each edition o f the ma nual is l isted bel ow: HP Part No. Edition Revision His tory A4500- 906 01 E0996 First pri nt i ng . A4505-906 01 E0297 Updated with P CI info rmation A451 1 -90604 A451 1 -90607 E0897 E1 199 Updated wit h 744/16 5L infor ma- tion, and new removab le media information Update[...]

xiv Documentatio n Conventions Unless ot herwis e noted in the t ext, this guide u ses th e followi ng symboli c conventi ons. user -sup plied val ues Italic words or characte rs in for- mats and command descr iptions represen t valu es tha t you must supply . sample user inp ut In examples, i nf ormat ion tha t t he user ente rs appe ars in co lor[...]

xv Questions, Sug gestions, or Problems If you have a ny que stions, suggesti ons, o r probl ems with our hardware, soft- ware, or d ocumenta tion, plea se contac t the HP Response Center fo r your country .[...]

xvi[...]

1-1 1 Product Description[...]

1-2 Produc t Description This chap ter i ntroduces the Mode l 748 wor kstation . Its p urpose is to famil- iari ze you w i th the work st atio n featu res, contr ols, a nd in dicat ors. The maj or sec tions wi thin this ch apter ar e: •F e a t u r e s • Model 74 8 Physical Dimensi ons and P ower Require ments • Board Computer Co nfigurat ions[...]

1-3 Produc t Descr iption The Model 748 Ruggedized Workstation The Model 748 Rugge dized Workstati on The Model 748 rugged ized workst atio n provides a VMEbus car d cage for a wide vari ety of VME and PCI or EISA cards. In combinat ion with the Model 743 or Model 744 board comput er as the system con troller , the Model 748 is excepti onall y flex[...]

1-4 Produc t Description The Model 748 Ruggedized Workstation Figure 1-2 Model 748 Rear View Figur e 1-3 Board C om puter F ront Pa nel Removabl e Medi a Device s (rear faci ng)[...]

1-5 Produc t Descr iption Features Features The Model 748 has th e followi ng gener al feat ures: • Two-slot 6U VME config uration f or th e proce ssor and i ts optio ns • Six av ailable 6U VME slots for us er insta lled devices • Inp u t/Out put (pro cess or depe ndent) : On-B o ard g raphi cs RS-232C (2) AUI (LAN) PMC option ca rds (thr oug[...]

1-6 Produc t Description Model 748 Phys ical Dimensions and Power Requirements Model 748 Physical Dimensions an d Power Requirements • Height: 323.8 5 mm (12.75 in.) • Width: 425 .45 mm (16.75 in.) • Depth: 41 9.1 mm (16.5 in.) • Power: fu lly loade d, 90 A @120V ac NOTE: Power requ irements d epend on the RAM, graphics, an d SCSI hardwar e[...]

1-7 Produc t Descr iption Board Computer Configurations Board Computer Configurations Memory , interface, graph ics, and operati ng system configurat ions depend on the proc essor you select ed when o rdering y our Model 748. Ple ase refe r to the ow ner ’ s guide fo r your pro cessor for memory configur atio n detail s. Conversion Cables The hig[...]

1-8 Produc t Description Conversion Cables[...]

2-1 2 Power Budget[...]

2-2 Power B udget This chap ter di scusses the power budgetin g for t he Model 748 works tation.[...]

2-3 Power B udget Power Budgeting Power Budgeting If your workstati on’ s applic ation requires sever al acc essory car ds and mass storage devices, powe r budgeti ng may be r equired. Power budgeti ng ensures that t he po wer nee ded for t he fol lowing inter nal d evices doe s not exceed the power avail abl e: • Mass st orage devices • Mode[...]

2-4 Power B udget Power Budgeting ory ba nk s . • The 16, 64, 12 8, and 256 M B cards ea ch hav e only on e memory ba nk th at is acti ve at any one time. The worst case power draw is when your system has two 32MB cards in slots 2 and 3 (these banks would be cons idered active, all o ther memory c ards/b anks wou ld be consider ed inactive). Th e[...]

2-5 Power B udget Power Budgeting T able 2-1 Model 744/1 32L Memory Card Cur r ent Usage W orksheet Memor y Card Size First Active Bank 1 Second Active Bank Third Active Bank Inactive Banks To t a l s (+5 V) 32 MB 2 1.15 A 1. 15 A 1.15 A 0.05 A x ___ __ _______ 64 MB 2. 6 A N/A N/A 0.1 A x __ _ _______ __ 128 MB 1.45A N/A N/A 0 .07 A x ___ _______ [...]

2-6 Power B udget Power Budgeting 3 Write in th e board computer ’s concurr ent requiremen ts in the lin e provid- ed for VM E slots 1 a nd 2 in the Lower Power Supply Works heet ( Table 2-7). 4 Determine each de vice’s c urrent require ments from t he Int ernal Devi ce Requir ements ta ble and the VME access ory ca rd’s s pecif ications shee[...]

2-7 Power B udget Power Budgeting T abl e 2-3 M o del 7 44 Cur rent Req u iremen t s W orkshee t Each Mo del 744 Bo ard C omputer +5V dc Amps +12V dc Amps -12V dc Amps If 13 2 MHz , cu rrent for +5 V dc is 4.7A 1 If 16 5 MHz , cu rrent for +5 V dc is 6.3A _____ _ 0 .1A 0. 1A RAM car ds (see T able 2 -1 or T able 2-2) _______ _ Graphics sub syst ems[...]

2-8 Power B udget Power Budgeting T abl e 2-4 M o del 7 43 Cur rent Req u iremen t s W orkshee t Each Mo del 743 Bo ard C omputer +5V dc Amps +12V dc Amps -12V dc Amps If 64 MHz, current fo r +5V dc is 6.1A 1 If 10 0 MHz , cu rrent for +5 V dc is 7.5A 0 .1A 0.1A RAM c ards x 0 .2A eac h = Graphics sub syst ems 2 x 0.7A eac h = FWD SCSI GS C card x [...]

2-9 Power B udget Power Budgeting T able 2-5 summari zes the c urrent require ments for the in terna l devices . T able 2-5 Inte rnal Device Curr ent Requir emen ts Device +5.1V dc Amps +12V dc Amps -12V dc Amps Internal m ass storag e devices: CD-ROM drive 1.6 A 1.8 A DDS tape d rive 1.0 A 0.8 A Flexible disk driv e 0.8 A 1 GB SE h ard driv e 1.2 [...]

2-10 Power B udget Power Budgeting CAUTION: If you upg rade your Mode l 748 rugge dized wo rkstation, a dding more: RAM cards, mas s storag e devices, GSC, VME, EISA, P CI, or PMC ac cessory cards, you must recompute the power budget to en sure the new configu ration will be within the avail able c urrent e ach power supply ca n provi de. T able 2-[...]

2-11 Power B udget Power Budgeting NOTE: The PCI tray provid es power for option cards from both a +5 Vdc source and a +3.3 Vdc source. Car ds may use either or both po wer sources, u p to 25W per sl ot. However , the +3.3 V dc sou rce is limited to 39 .8 W combined for slots 1 an d 2, an d 39.8 W combined for slot s 3 an d 4. Fo r example, if the [...]

2-12 Power B udget Power Budgeting T able 2-7 Lower Power Suppl y Curr ent Budgetin g W orksheet Loca tion Devic e +5V dc Amps +12V dc Amps -12V dc Amps -5.2V dc Amps Mass Storage Device 1 Mass Storage Device 2 Mass Storage Device 3 Mass Storage Device 4 VME Slot 2 and VME Slot 1 Mode l 743/7 44 Board Co mp u t e r _____ __ E I S A / P C I S l o t [...]

3-1 3 VME Card Installation[...]

3-2 VME C ard Installatio n This chap ter de scribes insta lling a VME ca rd int o the Mode l 748 wor ksta- tion. The maj or sec tions wi thin this ch apter ar e: • VME Overview • VME I nstal lation Outl in e • Installi ng VME Accessor y Card Hardwar e[...]

3-3 VME Ca rd Installatio n VME Ov erv iew VME Overview VME (V ersa Module Eurocar d) card s use a VME bus prot ocol whic h allows various kinds of mi croproces sors to c ommunicat e with one a nother . The protocol is micro proces sor in dependent, implement s a reli able mech anical standar d, and all ows independ ent vendor s to build compatibl [...]

3-4 VME C ard Installatio n VME Ov erview 9.05 VME Confi guration an d Driver Dev elopment Gui de (Par t Numb er A2636 90020) . Document ation for creat ing th ese driv ers fo r HP-UX 10.x is contain ed in t he VME Serv ices f or HP-UX 10 (Part Number A4412 90021) . CAUTION: If you need t o remove th e VME tray module from the cardc age, the PCI or[...]

3-5 VME Ca rd Installatio n VME In st allation Outline VME Instal latio n Outlin e VMEbus physic al slot n umbers are: 1 to 8 • The sy stem cont roll er boa rd comput er (Mode l 743/7 44) occ upies t he bot - tom two slots (s lots 1 and 2). • Slots 3 th rough 8 are t he accessi ble slots in the VME module. The se slots are number ed on the ba c[...]

3-6 VME C ard Installatio n Installing VME Accessory Card Ha rdware Installing VME Accessory Card Hardware Y ou’ll need these too ls to access th e VME cards : • Small flat-t ipped scr ewdriver • Medium f lat-ti pped screwdr iver • Sta tic-fr ee work spac e Installation Procedures CAUTION: When removi ng the VME mod ule, the PCI/EI SA modul[...]

3-7 VME Ca rd Installatio n Installing VME Accessory C ard Hardware 4 Refer to your VME card inst allati on manual , and then set any hardware configur atio ns that may be requ ired for your ap plicati on. 5 Slide t he VME acces sory c ard in to the sl ot, and t hen tight en it s screws. 6 Plug in t he power cords, and then turn on yo ur works tati[...]

3-8 VME C ard Installatio n Installing VME Accessory Card Ha rdware[...]

4-1 4 EISA Card Installation[...]

4-2 EISA Car d Installation This chap ter de scribes insta lling an EISA card in the Mo del 748 worksta - tion. The maj or sec tions wi thin this ch apter ar e: • EISA Acce ssory Card Configu ration Fi les • Hardware I nstal lation[...]

4-3 EISA Ca rd Installatio n EISA Accessory Ca rd Configuration Files EISA Accessory Card Configuration File s Four EISA sl ots are availabl e in the Mode l 748. The man page eisa_con fig (1M) ha s curren t inf ormation on inst alling your EI SA card(s) on HP-UX using t he eis a_config utilit y . The co nfig urati on for E ISA car ds is de term ine[...]

4-4 EISA Car d Installation Hardware Installation Hardware Installation Tools Required Y ou’ll need the foll owing it ems to access the EISA car ds in the Model 748 • Medium f lat-ti pped screwdr iver . • Sta tic-fr ee work area . Procedure 1 Stop any a pplic ation prog rams, an d then s hut down y our workst ation. 2 Turn the workstati on of[...]

4-5 EISA Ca rd Installatio n Hardware Installation Figu r e 4-1 Removi ng the E ISA Tr ay 5 Note that t he slots are numbe red from 1 t o 4. Cards fo r slo ts 1 a nd 2 ar e ins tall ed compone nt side down; ca rds f or slots 3 and 4 ar e inst alled compo nent s ide up. Loosen the card r etainer capti ve screw (s ee Figure 4- 2) for the appro priat [...]

4-6 EISA Car d Installation Hardware Installation Figure 4-2 Card Retainer Screw 6 Remove the s lot cover pl ate by pulling i t out of t he EISA module . 7 Refer t o your EISA ca rd inst allati on manual , and t hen set any confi gura- tions t hat may be requi red for your app lication. 8 Instal l th e EISA c ard i n the s lot. Make sur e it s conn[...]

4-7 EISA Ca rd Installatio n Hardware Installation Figure 4-3 Sliding the EISA Modul e Back into the VMEbus Chassis 11 Plug in the powe r cord, and the n turn on th e powe r for the VMEbus ch as- sis and boot th e operati ng syst em. 12 Verify the install ation by r unning the Support Tool s Manage r, as de- scribe d in your board comput er’s own[...]

4-8 EISA Car d Installation Hardware Installation[...]

5-1 5 PCI Card Installation[...]

5-2 PCI C ard Inst al lat ion This chap ter de scribes insta lling a PCI card in the Mod el 748 works tation’ s PCI tray . The PCI tr ay acco mmodates u p to fou r user instal led PCI c ards. The PCI cards mus t be stand ard +5 Vd c bus si gnallin g cards . Y our system must be runn ing versio n 10.20 or la ter of t he HP- UX op era ti ng system.[...]

5-3 PCI Card Installatio n Hardware Installation Hardware Installation 1 Stop any a pplic ation prog rams, th en shut down your work stat ion. 2 Turn the workstati on off, and unplug the power cord( s). WA R N I N G : To avoid electrical shock, make sure you unplug the power cable from the wall outlet and the system unit befor e proceeding any furt[...]

5-4 PCI C ard Inst al lat ion Hardware Installation 3 Usin g a fla t-ti pped sc rewd river , uns crew the ca ptive screws insid e the P CI module hand les f ive to sev en tur ns (until each s crew pops ou t). 4 Grasp the PCI module handles and pull th e PCI module out of the chassi s, as shown i n Figure 5- 1. Figure 5-1 Removing the PCI Mo dule 5 [...]

5-5 PCI Card Installatio n Hardware Installation NOTICES: This PCI tray only supports optio n cards with +5 Vdc bus s ignalling . If your workstation application requires several accessory cards and mass storage devi ces, power bu dgetin g may be required. This ens ures the power needed for these internal devices does not exceed the po wer availabl[...]

5-6 PCI C ard Inst al lat ion Hardware Installation Figure 5-3 Removing the Card Retainer and Slot Cover Plate 6 Remove t he slot cove r plate by pu lling it out o f the PCI mod ule, as shown in Figur e 5-3. 7 Refer t o your PCI car d inst allati on manual , and se t any conf igurat ion switches or ju mpers th at may be require d for yo ur applic a[...]

5-7 PCI Card Installatio n Hardware Installation 8 Instal l the PCI card i n the s lot, as shown in Figure 5 -4. Mak e sure i ts con - nector is compl etely se ated i n the PCI bac kplane . Figure 5-4 Inst alling a PCI Option Card 9 Replace t he PCI c ard reta iner, a nd then ti ghten its scre w[...]

5-8 PCI C ard Inst al lat ion Hardware Installation 10 Slide t he PCI module i nto the VMEbus chassis, as shown in Figure 5 -5, and tigh ten its h andle s crews. Figure 5-5 Installing the PCI Module in to the VMEbu s Chass is 11 Plug in the powe r cord, and the n turn on th e powe r for the VMEbus ch as- sis and boot th e operati ng syst em. 12 Log[...]

5-9 PCI Card Installatio n Hardware Installation 15 From t he Dri vers m enu , sele c t GSCtoPCI Driver. 16 Go to the Actions menu and sel ect Cre ate a New Kernel. 17 When the new k ernel is built, SAM as ks if you wan t to move th e kerne l into pl ace and re boot. Choose Ye s. The syste m reboot s with the PCI dri ver lo aded. For More Informati[...]

5-10 PCI C ard Inst al lat ion Hardware Installation[...]

6-1 6 Installing a nd Configuri ng Mass Storage Devices[...]

6-2 Installing a nd Configu ring Mass S torage Devices This chap ter de scribes insta lling th e mass stor age dr ives in you r Model 7 48 workstat ion. The maj or sec tions wi thin this ch apter ar e: • Ha rd ware In stalla tion for Driv es • Finding t he Status of Existing SCSI Bus Addr esses • Installi ng Mass Stor age Devices • Confi gu[...]

6-3 Installing and Configu ring Mass S t orage Devic es Hardware Inst allation for Drives Hardware Installation for Drives The foll owing pr oducts ar e suppor ted for ma ss sto rage in t he Model 7 48i. The mass st orage module can ho ld up t o four d rives . All produc ts in clude instal lation h ardware for e ither a 3 .5-in. o r 5.25- in. mass [...]

6-4 Installing a nd Configu ring Mass S torage Devices Hardware Inst allation for Drives Module Orientations The Model 74 8i uses t wo mass storage module holds u p to four single-ende d SCSI devic es. Removable med ia driv es can be fitt ed to be ac cessi ble from ei ther th e front or the r ear of t he Model 74 8 chass is. See Fig ure 6- 1 for s [...]

6-5 Installing and Configu ring Mass S t orage Devic es Finding the St atus of Existing SCSI Bus Addresses Finding the Status of Existing SCSI Bus Addresses Before yo u instal l a new SCSI dr ive, to en sure that the SCSI bus address o f your devic e is curre ntly unused , you can use SAM, or you can use the ioscan tool t o help det ermine whic h d[...]

6-6 Installing a nd Configu ring Mass S torage Devices Installing Mass Storage Devices Installing Mass Storag e Devices Removing t he Mas s Storag e Modu le 1 Determine what SCSI bus addres ses are in use by f ollowing the procedu re in the previ ous s ecti on . Be su re t o w rite d own th is info rma tion. 2 Shut down yo ur system by typing shutd[...]

6-7 Installing and Configu ring Mass S t orage Devic es Installing Mass Storage Device s Installing a Device in the Mass Storage Module 1 Remove the n ew device f rom its sh ipping box 2 Ensure t hat th e hardware SCSI bus a ddress selecte d on the device is not alre a dy us ed by t he sys t em. 3 In the ca se of a r emova ble media de vic e (f le [...]

6-8 Installing a nd Configu ring Mass S torage Devices Installing Mass Storage Devices Figure 6- 2 Device I nstallat ion in the Mas s Storage Modul e 8 Tighten t he mounting screws. 9 Replace t he ind ividual SCS I and powe r connect ors. 10 Replace the mass-s torage modul e in the Mode l 748i . 11 Tighten the ca ptive scr ews for the mas s storage[...]

6-9 Installing and Configu ring Mass S t orage Devic es Installing Mass Storage Device s 15 Press 6 follow ed by Enter to look at the HARDWARE INFORMATION scr een. 16 Ensure t hat th e new device is li sted in HARDWARE INFORMATION .[...]

6-10 Installing a nd Configu ring Mass S torage Devices Configuring for a Hard Disk D rive Configuring for a Hard Disk Drive Hard disk drive u pgrades can be inst alle d to acc ommodate l ocal f ile sy stems and swap sp ace on your worksta tion. Software Installation of the Hard Disk Drive Upgrade After ha rdware install ation has been co mple ted,[...]

6-11 Installing and Configu ring Mass S t orage Devic es Configuring for a Hard Disk Drive NOTE: SAM does not s upport the fo llowing: • Changing t he hardware a ddress of a disk drive containi ng the root f ile system. • Changing t he har dware addre ss of a disk a rray. • Changing t he har dware addre ss of a disk t hat is pa rt of sof twar[...]

6-12 Installing a nd Configu ring Mass S torage Devices Configuring for a Hard Disk D rive moved, t he drivers need ed for a hard disk s hould current ly be in the ker nel.) You will be given an informatio n screen suggesting t hings to try if th e device still cannot be fou n d. If this is the case, you will need to consult th e man ual Peripheral[...]

6-1 3 Installing and Configu ring Mass S t orage Devic es Configuring for a Hard Disk Drive SCSI describe of /dev/rdsk/c201d5s 0 vendor: Quantum product id: XXXXXXX type: direct access size: 200000 Kbytes bytes per sector: 512 After moun ting a new d isk on a di rectory , an ll listi ng of the direc tory should gi ve you a t least one file or dir e[...]

6-14 Installing a nd Configu ring Mass S torage Devices Configuring for a Hard Disk D rive[...]

7-1 7 Using Mass Storage Devices[...]

7-2 Using Ma ss S torage Devic es Using your CD-ROM Drive Using your C D-ROM Drive This sect ion des cribe s how to us e your CD-ROM dri ve. It is d ivided into t he followi ng subse ctions: • CD-ROM drive an d CD-ROM media descr iptions • Operati ng the CD-ROM Drive • Mounting an d unmounting a CD-ROM disc • T roub leshoo ting NOTE: Be sur[...]

7-3 Using Mas s S torage Devices CD-ROM Drive a nd CD-ROM Media D escriptions CD-ROM Drive and CD-ROM Media Descripti ons This sec tion de scribes basic inf ormati on need ed for usi ng the CD-ROM drive a nd CD-ROM discs. CD-ROM Drive The CD-ROM drive is a rand om access re ad-only mas s storage device t hat uses re movable CD-ROM disc s. The driv [...]

7-4 Using Ma ss S torage Devic es CD-ROM Drive and CD-ROM M edia Descriptions NOTE: The Volume Cont rol, Hea dset Ja ck, and Audi o Jack f eatures of the CD-ROM drive a re supp orted thr ough app licatio ns only . CD-ROM Media CD-ROM discs ar e 120 mm (4 .7 in.) in d iameter , and use one dat a surfac e with a ca pacity of approx imately 60 0 megab[...]

7-5 Using Mas s S torage Devices CD-ROM Drive a nd CD-ROM Media D escriptions CAUTION: Handle CD-ROM di scs by the edges only . Always be sur e a CD-ROM disc is eith er i n the CD -ROM driv e or it s pro tectiv e cas e whe n not in use . This w ill lessen the chance of exp osing t he disc s urface to dust. O ver ti me, dust reduces the re liabi lit[...]

7-6 Using Ma ss S torage Devic es Oper ati ng t he CD -RO M Dr ive Operating th e CD-ROM Drive This sec tion desc ribes how t o perform t asks with your CD-ROM dri ve. Loading and Unload ing a CD-ROM in the Disc Tray This subs ection de scribes how to lo ad or unloa d a CD-ROM disc i n the CD- ROM drive. Disc T ray Descri ption This CD-ROM is d esi[...]

7-7 Using Mas s S torage Devices Operating the CD-ROM Drive Loading a CD-ROM Disc This CD- ROM drive h as an au tomatic l oading/ ejecti ng featur e. T o load a disc in the CD-ROM dr ive, fo llow th ese steps : Figure 7-3 Placing a CD-ROM Disc in a Drive 1 Check that the works tation is po wered on. 2 T o open the dis c tray , press and release the[...]

7-8 Using Ma ss S torage Devic es Oper ati ng t he CD -RO M Dr ive Unloading a CD-ROM Disc Perform t he fol lowing ste ps to u nload a disc fro m the CD-ROM drive: Figure 7-4 Removing a CD-ROM Disc From a Drive 1 Press the eject button to eject the disc tray from the drive. I f the drive is in use, you must press the eject bu tton for more than one[...]

7-9 Using Mas s S torage Devices Operating the CD-ROM Drive Verifying the CD-ROM Driv e Operation T o verify that yo ur works tation can c ommunicate wi th the CD-ROM drive, follow t hese s teps: 1 In a terminal window, enter th e following command: /etc/ iosca n -d sdi sk Enter (For HP-UX 9.x) /usr/sb in/io scan -d s disk Ent er (For HP- UX 10.x) [...]

7-10 Using Ma ss S torage Devic es Oper ati ng t he CD -RO M Dr ive If ios can do es no t see y our C D -ROM drive it retu rns th e foll owin g mes- sage: ioscan: No hardware found If you r eceive th is message , go to Cha pter 10, “De aling W ith Problems.”[...]

7-1 1 Using Mas s S torage Devices Mounting and Unmounting a CD-ROM Disc Mounting and Unmounting a CD-ROM Disc T o access informat ion on a CD-ROM disc, you mus t first mount the d isc. This app lies to f ile syst em inf ormation only . If you wis h to l oad a music CD, for exampl e, you wou ld not nee d to mount th e disc. Mo unting a di sc with f[...]

7-12 Using Ma ss S torage Devic es Mounting and Unmounting a CD-ROM Disc The syste m respon ses you receiv e depend on the re lease of HP-UX. 4 The System Admi nistrat ion Manager window open s. Double- click on Peripheral Devices -> . 5 The Perip heral Devi ces win dow opens. Double- click on Disks and File Systems -> . 6 The Disk s and Fi l[...]

7-1 3 Using Mas s S torage Devices Mounting and Unmounting a CD-ROM Disc Unmounting a C D-ROM Disc Using SA M Use the f ollowing pr ocedure t o unmount a CD-ROM disc: NOTE: Before y ou un mount a CD-ROM disc, ma ke s ur e t hat yo ur wo rki ng direc tory (the d irecto ry in wh ich a rela tive p ath na me search begin s) is se t to some direct ory o[...]

7-14 Using Ma ss S torage Devic es Mounting and Unmounting a CD-ROM Disc 8 Press t he eject button on t he CD-ROM drive a nd remove the CD-ROM disc fr om the di sc tray . Reading the Busy Ligh t The CD-ROM busy l ight s hows the st atus of the dri ve duri ng the sel f tes t and duri ng acti vity wit h the ho st syste m. The CD-ROM drive performs th[...]

7-1 5 Using Mas s S torage Devices DDS T ape Drive and Data Cassette Descriptions DDS Tape Drive and Data Cassette Descriptions This sec tion de scribes how to us e the opti onal Di gital Dat a S torag e (DDS) tape dr ive. It also des cribe s how to ma intain an d care for th e drive. This chap ter pr ovides i nformat ion on t he follo wing: • DD[...]

7-16 Using Ma ss S torage Devic es DDS T ape Drive and Data Cassette Descriptions S torage Capacities The maximum st orage capa cities of dif ferent DDS drive s with and wi thout data compr ession are s hown in T a ble 7-2 and T able 7-3. Contr ols and Indi cators Figure 7- 5 shows the LEDs and e ject b utton of t he DDS-f ormat tape drives . T abl[...]

7-1 7 Using Mas s S torage Devices DDS T ape Drive and Data Cassette Descriptions Figure 7-5 Tape Drive Controls and Indicators LEDs This sec tion de scribes the LED co des that a re displ ayed. The two LEDs on the f ront pa nel s o f the DDS d ri ves in dicat e di f fere nt activ - ities or proble ms that occur . Figure 7- 6 lists the LED c odes a[...]

7-18 Using Ma ss S torage Devic es DDS T ape Drive and Data Cassette Descriptions LED W arning Conditions The foll owing se ctions de scrib e actions to ta ke if the LEDs indi cate a war n- ing condi tion. High Hu midity If the LED s displ ay the high hu midity signa l, the hu midity i s too high . The driv e does not perfo rm any opera tions until[...]

7-1 9 Using Mas s S torage Devices DDS T ape Drive and Data Cassette Descriptions If the LED indicato rs on yo ur DDS-fo rmat dr ive displ ay the Media W ear (Cautio n) condi tion, follow th is pro cedure : 1 Check the sys tem conso le for any ta pe erro r messages. A har d error during a read or write ope rati on may hav e occurre d. 2 Clean the h[...]

7-20 Using Ma ss S torage Devic es DDS T ape Drive and Data Cassette Descriptions Cleaning the T ape Heads Clean the he ads of your ta pe drive af ter every 25 hours of tape drive use or if the Media W ear (Cauti on) signa l is dis played on the LE D. NOTE: Only use HP Cle ani ng Ca ssett es ( HP922 83K) to c lea n th e tape h ead s. Do no t use sw[...]

7-2 1 Using Mas s S torage Devices DDS T ape Drive and Data Cassette Descriptions Figure 7-7 Setting the Write-Protect Tab on a DDS Tape T o protect in format ion on a dat a cass ette fr om being o verwritt en, set th e write- protect t ab to the write -protect posit ion, as sh own in Fi gure 7- 7. NOTE: The write -protect tab shoul d always be in [...]

7-22 Using Ma ss S torage Devic es Operating the DDS T ape Drive Operating th e DDS Tape Drive This sec tion desc ribes how t o perform t asks with your DDS ta pe drive. Loading and Unload ing a Data Cassette Follow th ese st eps to loa d and unl oad a d ata casse tte fro m the DDS tape drive: 1 Insert the data cassette into th e drive, as shown in[...]

7-2 3 Using Mas s S torage Devices Operating the DDS T ape Driv e Verifying the DDS Tape Drive Ope ration T o verify that your works ta ti on ca n communi cate with the DDS- fo rmat ta pe drive, e nter t he fol lowing : /usr/s bin/io scan -d stape (for HP- UX 10.x) /etc/ ioscan -d stape (for HP -UX 9.x) Afte r a few mo ments t he ios ca n util ity [...]

7-24 Using Ma ss S torage Devic es Operating the DDS T ape Drive 2 The Syste m Administrat ion Manager window opens. Double-c lick on Peripheral Devices -> . 3 The Perip heral Devi ces win dow opens. Double- click on Tape Drives -> . 4 The T ape Drives windo w opens. 5 In the list of tap e d rives , clic k on th e des ired t ape dr ive to sel[...]

7-2 5 Using Mas s S torage Devices Operating the DDS T ape Driv e Restoring Files from a Data Cassette to Your System Use the f ollowi ng instru ction s to rest ore fi les fro m a data cassette to your system: 1 Load th e data cass et te into the ta p e driv e. 2 In a termi nal window , use cd to change to the direc tory you want the fi les to res [...]

7-26 Using Ma ss S torage Devic es Operating the DDS T ape Drive Y ou may also communica te with t he tape dr ive with t he cpio, ft io, mt, a nd fbackup co mmands. For more in form ation o n these c ommands, ent er the f ol- lowing in a t erminal window: man command Enter[...]

7-2 7 Using Mas s S torage Devices Ordering Information Ordering Inf ormation T o order Hewlet t-Packard data c assette s and cl eaning ca ssett es for us e in your DDS tap e drive, us e the fol lowing orde r numbers: • HP92283A - Box o f five 60-met er DDS dat a casset tes • HP92283B - Box o f five 90-met er DDS dat a casset tes • HP92300A -[...]

7-28 Using Ma ss S torage Devic es Using the Floppy Diskette Using the Floppy Diskette This sec tion de scribes basic inf ormati on need ed for usi ng your floppy dis - kettes . Setting the Write-Protect Tab on a Diskette Y ou can only s tore or ch ange i nformat ion on a di skette whe n the wri te-p ro- tect ta b is in the w r i te pos itio n . So[...]

7-2 9 Using Mas s S torage Devices Using the Floppy Diskette Inserting and Removing a Diskette Follow th ese st eps to ins ert a nd remove a di sket te from the flopp y disk drive: 1 Insert the diskette into th e drive, as shown in Fig u re 7-10. Figure 7-10 Insertin g and Removi ng a Flo ppy Disk ette 2 Push the d isket te into t he fl oppy dri ve[...]

7-30 Using Ma ss S torage Devic es Operating the Floppy Drive Operating th e Floppy Drive This sec tion desc ribes how t o perform t asks with your 3.5- inch flo ppy disk drive. Verifyin g the Floppy Drive Configu ration T o verify that yo ur works tation can c ommunicate wi th the fl oppy dr ive, use the ios can command to see which devic es are c[...]

7-3 1 Using Mas s S torage Devices Operating the Floppy Drive sam Enter 2 The Syste m Administrat ion Manager window opens. Double-c lick on Disks and File Systems-> . 3 The D i sks an d File Syst ems wi ndow o pens . 4 In the l ist of dr ives, click on the fl oppy dri ve list ing to select i t. 5 From the Act ions menu, c lick on View More Info[...]

7-32 Using Ma ss S torage Devic es Operating the Floppy Drive Y ou need to se t the write prot ect t ab to the write pos ition to tr ansfer da ta to the dis kette . The write- prote ct tab ca n be in either po sition whe n rest oring data fr om a dis kette or list ing the fi les o n a disket te. Saving Files to a Floppy Dis kette Use t he fol lo wi[...]

7-3 3 Using Mas s S torage Devices Operating the Floppy Drive 3 Ente r th e foll owing comman d line : tar -x vf devicef ile pat hname Ente r where devi cefile is th e devic e file a s listed by sam and pat hname i s the pathname o f the f il e o r di re ct ory con taini ng f il es tha t y ou wan t to r est or e from the disket te. If yo u don’ t[...]

7-34 Using Ma ss S torage Devic es Operating the Floppy Drive man cpio Ente r For m ore infor mati on on copyi ng to or fr om D OS fi les, refer to t he ma n pag e by typin g the f ollowi ng in a ter minal wi ndow: man doscp For mo re inf o rmat ion on li st ing the cont ents of DOS dir ec torie s, re fe r to the dosls man page by t yping the follo[...]

7-3 5 Using Mas s S torage Devices Ordering Information Ordering Inf ormation T o order Hewlet t-Packard micro f lexible disket tes for use in your 3.5-i nch floppy di sk driv e, use th e foll owing order number: HP-92192X High-De nsity Micr o Flexible Dis ks (1.44MB Formatted Capacit y) - box of ten dis kette s[...]

7-36 Using Ma ss S torage Devic es Ordering Information[...]

8-1 8 Connecting Cables[...]

8-2 Connectin g Cables For info rmation on co nnecti ng the Mod el 743 or Model 744 b oard compu ter in your Mode l 748 wor kstatio n to any of the followin g connec tions , see the owner ’ s gu ide th at came with your boa rd comput er: • connecti ng a si ngle monit or, mult i-di splay syst em, or text -only termin al • audio con necti on ?[...]

8-3 Connecti ng Cables Figure 8-1 SCSI Connections Single-ended internal connector Fast-wide-differ ential Fast-wide-differential external connector/terminator Single-ended external connector/terminator internal connector (two shown)[...]

8-4 Connectin g Cables[...]

9-1 9 Power-On/Power-Off[...]

9-2 Power-On/Power-O ff Poweri ng On the S ystem Powering On the Syst em Before po wering o n the syst em, ensur e that po wer cord s are connected t o both power suppli es, an d that the power c ords are c onnect ed to sit e power . 1 Switch the p ower switches on both power su pplies to t he 1 (ON) pos ition ( see Figur e 9-1). 2 Push in the powe[...]

9-3 Power-On/ Power-Off Powering On the System Figure 9-2 Card Cage Power Switch Main Card Cage Switch[...]

9-4 Power-On/Power-O ff Poweri ng Off the Sy stem Powering Off the System Before po wering of f the system, you must shutdown t he oper ating syst em. Please ref er to the owner’ s gui de for your boar d comput er or your oper at in g syste m for in struc tions o n shut ting do wn the o pera ti ng sys tem. 1 Once the operating system is shut down[...]

10-1 10 Dealing With Problems[...]

10-2 Dealing W ith Proble ms This chap ter c ontains i nformat ion to help yo u determ ine what’ s wrong with your sys tem when yo u ha ve probl ems. If you hav e a prob lem that i sn’ t l isted in this chapt er , o r if y our proble m persi sts, conta ct your designat ed servi ce repres entative. When c alling f or servi ce, alwa ys have your [...]

10-3 Dealing W ith Probl ems Interpreting the LED Indicators Interpreting the LED Indicators For info rmatio n about the boa rd comput er ’ s LED displays, please refe r to the ow ner ’ s guide sh ipped with your boa rd computer .[...]

10-4 Dealing W ith Proble ms Managing a Boot Failure Managing a Boot Failu re The boot progr am is lo cated in the firmwar e of t he Mo del 743/7 44. Y ou can configur e the behavior o f the boot proce ss by in teracti ng with the boo t con- sole handl er . See the appropri at e owne r’ s gui de fo r you r board co mp ute r f or procedur es to de[...]

10-5 Dealing W ith Probl ems Recovering from a System Panic Recovering from a System Panic A system panic simp ly means that the oper ating s yst em encou ntere d a co ndi- tion th at it di d not know how t o respond t o, so it ha lted your system. System panics ar e rare an d not al ways the r esult of a cata strop he. They sometimes occur a t boo[...]

10-6 Dealing W ith Proble ms Recovering from a System Panic NOTE: It is impor tant to maintain an up-to-date ba ckup of the file s on your system so that, i n the e vent o f a disk h ead cr ash or si milar si tuati on, you can recove r your dat a. How fr equently you upd ate t hese back ups dep ends on how much data you ca n af ford to los e. For d[...]

10-7 Dealing W ith Probl ems Recovering from a System Panic Other pr oblems may res ult from fau lty confi guration of the Mode Configu- ration ar ea of the Bo ot Consol e Handler . If you have boo t problems, check that th e fol lo wing ar eas us e the ir defa u lt valu e s: • Cu rr ent m od e is “US ER” (d efau lt mode). * • FASTBOOT is s[...]

10-8 Dealing W ith Proble ms Recovering from a System Panic If the h ardware failure appear s to be asso ciated wit h a per ipheral, e nsure tha t its c ables ar e tightly connec ted to the ir prop er locat ions and that t he devic e is powered on , and in an “onl ine” stat e. If the re is an error indic ated on the device’ s display: 1 Recor[...]

10-9 Dealing W ith Probl ems Recovering from a System Panic Proceed t o St ep 3, Reboot ing Y our System . Step 2d: Recovering from Other Situations When yo u suspect the pr oblem was something other t han the above (o r when you do not know where to classif y it), pr oceed to S te p 3, Rebooting Y our System . In this ca se , i t is esp eci al ly [...]

10-10 Dealing W ith Proble ms Recovering from a System Panic If the reason your syst em panick ed was becau se of a corrupte d file sy stem, fsck wi ll r eport the erro rs and a ny cor re ction s it ma kes. I f th e proble ms were associa ted with y our root f ile system, f sck will ask y ou to reboo t your s ys- tem when it ’ s finished. When yo[...]

10-11 Dealing W ith Probl ems Dealing with Network Failures Dealing with Network Failures If the progra m you have been run ning uses r esour ces from a l ocal area net- work (L AN) a nd it st ops une xpec te dly , th e foll owing may help locat e the source o f the prob lem: T abl e 10-3 Proble ms wi th th e N etwo r k Problem Action No syst em s [...]

10-12 Dealing W ith Proble ms Dealing with Network Failures[...]

A-1 A Safety an d Regulatory S tatements[...]

A-2 Safety an d Regulatory S tatements This appe ndix co ntains sa fety a nd regula tory s tatements pertaini ng to y our Model 748 wor kstat ion. It provides infor mation on the fol lowing topics: • Declarati on of confo rmity • Special video c onfigura tion sta tements • Emissions regulat ions • Emissions regulat ions co mplianc e • Dat[...]

A-3 Safety an d Regulatory S tatements Declaration of Conformity Declaration of Conform ity[...]

A-4 Safety an d Regulatory S tatements Special Video Configuration St atement s Special Video Configuratio n Statements For EN55022 or CISPR 22 Applications: WA R N I N G : This is a Cla ss A prod uct . I n a do mestic envi ronment th is pro duct may c aus e radio i nterfer ence i n which case the use r may be requi red to take adeq uate measures. [...]

A-5 Safety an d Regulatory S tatements Emissions Regulations Emissions Regula tions Federal Communi cations Commis sion (FCC) This equi pment has be en tested and fou nd to co mply with the limit s for a Cl ass A di gital de vice, p ur- suant t o part 15 of the FCC Ru les and interfe rence causing r egulatio ns of Industr y Can ada . Thes e l imi t[...]

A-6 Safety an d Regulatory S tatements Emissions Regulations C ompliance Emissions Regula tions Compliance Any third -party I /O devi ce instal led in HP s ystem(s ) must be i n accor dance with the re quire men ts set forth in the prec eding Emis sions Reg ulatio ns st ate- ments. In the eve nt tha t a th ird-part y nonco mpliant I/ O devic e is i[...]

A-7 Safety an d Regulatory S tatements Acoustics Acoustics Regulation On Noise Declaration For Machines -3. GSGV Lpa <70dB Lpa<7 0dB operator po sition am Arbei tsplatz normal ope ration normaler Be trieb per ISO 777 9 na ch DIN 45635 T .19[...]

A-8 Safety an d Regulatory S tatements Electrostatic Discha rge (ESD) Pre cautions Electrostati c Discharge (ESD) Precautions Elect rosta ti c charge s can da mage th e inte g rated circu it s on pr inted ci rcuit boards. T o prevent such dama ge from occu rring, obs erve t he following p re- caution s during bo ard unpacki ng, ins tallation , and [...]

A-9 Safety an d Regulatory S tatements Safety Statement Safety Statement This equi pment co nforms to t he fol lowing saf ety st andards: • UL 1950 • CSA 950 • IEC 950 • EN 60950[...]

A-10 Safety an d Regulatory S tatements Laser Safety Statement (U.S.A. Only) Laser Safety Statement (U.S.A. Only) The CD ROM mass- storage system is c ertified a s a Class- 1 laser p roduct under th e U.S. Departmen t of Health an d Human Ser vices (DHHS) Radia- tion Per formanc e S tandard a ccording to the Radiation Control for He alth and Safet [...]

A-1 1 Safety an d Regulatory S tatements W arnings and Cautions Warnin gs and Cautions[...]

A-12 Safety an d Regulatory S tatements W arnings and Cautions[...]

Glossar y-1 Glossary absolute pa th name The name of a file which lists all the directories leading to it, starting w ith root (“/”) and en ding with the file base n ame itself. If the path name indicates a directory, leave th e trailing slash. For example, /us ers/jth/ . See Using HP-UX for m ore in form ation on path names an d director y str[...]

Glossary-2 Glossa ry click To press and release a m ouse b ut- ton rapi dly. cluster A grou p of workst ation s con- nected via a LAN. One co mputer, the ++cluster server++, performs as a file- system server for the <term noglo- ss>cluster client s (For information o n clusters , see <book| Managing Cluste rs of HP 90 00 Co mputers: Shari [...]

Glossa ry Glossar y-3 process can perfor m a requested o pera- tion on the file (such as o pening a file for writing). Access permissions can be changed by the chmod(1 ) command. fileset A logically-defined, named set of files on an update or in stall ation tape. file system The org aniz a tion of file s on a given storag e device, possibly in - cl[...]

Glossary-4 Glossa ry mount directory The director y in an existing file system that is the root direc- tory of a mounted auxi liary file system. multiuser stat e The condition of th e HP-UX operating system in wh ich the cluster n odes (and co nsole) allow co m- munication between the system and all its users. Native Lang uage Supp ort (NLS) A feat[...]

Glossa ry Glossar y-5 root directory T he highest level direc- tory of the hierarch ical file system, from which all other files bran ch. In HP-UX, the slash (/) character refers to the “root directory.” The root directo ry is the only directory in the file system that is its o wn “parent directory.” root file system The file system mounted[...]

Glossary-6 Glossa ry data for a program . The st andard i nput file is often called stdin, and is auto mati- cally opened by the shell fo r reading on file des cripto r 0 for ev ery comm and in- voked. standard o ut put The destination o f outpu t data f r om a pro gram. Standa rd outpu t appea rs on t he dis play unless it is redirected otherwise.[...]

Index Index-1 A acous tics regula tions, A-7 adap te r cables , 1-7 archivi ng data listi ng fi les , , 7-25 restorin g files,, 7-25 savi ng to a cass ette, , 7- 24 archivi ng da ta,, 7-24 B board com pu ter config uration s, 1-7 boot fail ure , 10-4 C cables, 1-7, 8-1 card insta ll a ti on, 3-1, 4-1 cautio ns and warn ings, A-11 CD-ROM disc busy l[...]

Index-2 Index rel ea se do cu me nt s , xi i revision histo ry, xiii S safety laser, A-10 standards, A-9 safet y and regula to ry state m ents, A - 2 SCSI addresse s, 6-5 , 6-1 0 SCSI connec to rs, 8-3 system pan ic , 10-5 T tar com mand, addition al info rmatio n,, 7- 25 V VME, 3-1 VME ca rd install ation, 3-1, 3-6 VME dri ver conf igurati on, 3-4[...]