Humminbird GR16 инструкция обслуживания

531478-1_B GR16 GPS Receiver Accessory Manual GR16 GPS Receiver Accessory Manual[...]

Thank You! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. Your Humminbird® accessory is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbir[...]

Table of Contents GR16 GPS Connection Kit 1 How GPS and Trackplotting Work .......................................................................................................... 1 Connecting a GR16 GPS Receiver to the Fishfinder ............................................................................ 2 GPS Receiver Installation ............[...]

Navigation X-Press™ Menu (Navigation Views only) 23 Mark .............................................................................................................................................................. 24 Zoom ............................................................................................................................[...]

Troubleshooting 45 Fishing System Doesn’t Power Up ................................................................................................ ........ 45 Fishing System Defaults to Simulator with a Transducer Attached ............................................ 45 Display Problems ...........................................................[...]

GR16 GPS Connection Kit The Humminbird® GR16 GPS Connection Kit includes the following items: • GR16 GPS Antenna Receiver with 20' (6m) cable • AS YC("Y") cable for multiple accessory attachment • Hardware kit for stem or deck mounting • GR16 GPS Receiver Accessory Manual NOTE: 10 foot extension cables are available as an op[...]

The GPS Receiver allows you to combine easy-to-use trackplotting and navigation capabilities with advanced fishfinding. The following GPS functionality is currently supported by your Fishing System when it is connected to the included GPS receiver: • View current position • View current track (breadcrumb trail) • View precision speed and head[...]

5. The Fishfinder Control Head outputs NMEA signals thru the "pigtail" cable attached to the end of the GR16 GPS Receiver Cable for connection to devices such as autopilots. Connect the NMEA Out (White Wire) of the cable to the NMEA In of the device you are connecting to your Fishfinder. The pinouts of this cable are as follows: • Red W[...]

GPS Receiver Installation To optimize performance of the GPS receiver, mount it in an area that has full exposure to the sky. The effective area of reception is 10° above the horizon. Different circumstances determine the mounting method appropriate for your GPS receiver. If you have… Then use: An antenna stem with standard 1” – 14 thread St[...]

NOTE: Leave the NMEA pigtail secured to the cable unless needed in order to make it easier to remove the GPS Receiver. 4. Route GPS Receiver cable through the stem and continue with the planned cable route. 5. Attach the GPS Receiver to its base using the included #6 - 1/4” screws. Hand tighten only . Access Under Mounting Location Follow these s[...]

No Access Under Mounting Location Follow these steps to deck mount the GPS Receiver in a situation where you must route the cable to the side because there is no space for a cable underneath the mounting location. 1. Determine the best location, then test route the 20’ (6 m) cable from the Fishfinder control head to the planned mounting location [...]

Views The following views will be added to the View Rotation when a GPS Receiver is connected to the Fishfinder Fishing System: Navigation views: • Bird’s Eye View • Track View • Combo View Bird’s Eye View Bird's Eye View - This view shows a 3-D, perspective view of the track from a point above and behind the boat (the eye point). As[...]

Track View Track View - This view shows the current track (also known as the position history or breadcrumb trail) showing where the boat has been, along with saved tracks, waypoints, and the current route (when navigating). Panning: Use the 4-WAY Cursor keys to move the grid around on the display in the direction of the key being pressed. When you[...]

Combo View Combo View - This view is displayed as a split screen, with Track View on the left and Sonar View on the right side of the screen. The width of the sonar window can be changed. View Orientation Both Track and Combo views allow you to choose the orientation of the view. When North-Up orientation is selected, North is shown at the top of t[...]

Introduction to Navigation Use your Fishfinder to establish waypoints at areas of interest and to navigate to those waypoints via a route (representing the shortest intended distance between waypoints). You can also view and save tracks, which represent the actual path of the boat. Waypoints, Routes and Tracks Waypoints are stored positions that al[...]

11 Save, Edit, or Delete a Waypoint Save your current position as a waypoint: On any view, press the MENU key to display the X-Press™ menu. Select Mark and press the RIGHT Cursor key to save the current position of the boat as a waypoint. Save the cursor position as a waypoint: On the Track or Combo view, use the Cursor key to designate the posit[...]

To make it easier to select a waypoint, select Sort By and press the RIGHT or LEFT Cursor keys to select a sort order: • Name shows the waypoints alphabetically • Time shows the most recently-created waypoint first • Distance shows the closest waypoint first. Delete a waypoint: From the Waypoints submenu, select Delete and press the RIGHT Cur[...]

Add a Waypoint Target or Trolling Grid Add or Remove a Waypoint Target: From the Waypoints submenu, select Target and press the RIGHT Cursor key to display a list of waypoints. Select the waypoint you want to target. A target consisting of concentric circles centered on the selected waypoint will appear on all of the navigation views; the target sh[...]

Save or Clear a Current Track Save the current track: From the Navigation X-Press™ menu, select Save Current Track and press the RIGHT Cursor key. The track will remain on the display, but will change from black to gray. To remove the track completely from the display, see Edit, Delete or Hide Saved Tracks. NOTE: When you save a track, a name is [...]

The Menu System The menu system is divided into easy-to-use menu modules. The main components of the menu system are: Start-Up Options Menu - Press the MENU key during the power up sequence to view the Start- Up Options menu. X-Press™ Menu - The X-Press™ menu allows you to access the settings that are changed frequently without having to naviga[...]

User Mode (Normal or Advanced) - An Advanced Mode is provided for users who desire the highest level of control over the Fishing System and Normal Mode for users who desire greater simplicity and fewer menu choices. Additional Advanced menu choices will be displayed throughout the menu system when you navigate to specific menus while in Advanced Mo[...]

Start-Up Options Menu Press the MENU key when the Title screen is displayed to access the Start-Up Options menu. Use the UP or DOWN 4-WAY Cursor keys to position the cursor, then the RIGHT Cursor key to select one of the following choices. If you wait too long, the system will default to whichever menu mode happens to be highlighted: • Normal •[...]

NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually from the Start-Up Options menu as opposed to letting the Fishing System enter Simulator automatically (as it will if a transducer is not connected and you do nothing during power up). Manually selecting Simulator from the Start-Up Options menu allows you to[...]

Accessory Test Accessory Test lists the accessories connected to the system. NOTE: The speed accessory will be detected only if the paddlewheel has moved since your Fishing System was powered up. NOTE: GPS will be shown as Connected when your Fishing System detects your GR16 GPS Receiver. GPS Diagnostic View GPS Diagnostic View shows a sky chart an[...]

PC Connect (With PC Connect Cable only) Use PC Connect to update the software of the Fishing System control head. This feature requires the use of the PC Connect Cable. Complete instructions are included with the PC Connect Cable accessory. NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at www.hummin[...]

Sonar X-Press™ Menu (Sonar Views only) The Sonar X-Press™ menu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-Press™ menu. NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode. The Mark and Cancel Na[...]

Mark Mark allows you to mark the position of a waypoint, either at the current boat location, or, if the Cursor is active, at the current Cursor location. To Mark a Waypoint: 1. Highlight Mark on the Sonar X-Press™ menu. 2. Use the RIGHT 4-Way Cursor Control key to mark the location of a Waypoint. Cancel Navigation (only when Navigating) Cancel N[...]

Navigation X-Press™ Menu (Navigation Views only) The Navigation X-Press™ menu provides access to the settings most frequently used. Press the MENU key once while in the Bird's Eye View, the Track or the Combo View to access the Navigation X-Press™ menu. NOTE: Menu choices will vary depending on system settings, such as whether you are cu[...]

Mark Mark allows you to mark the position of a waypoint, either at the current boat location, or, if the Cursor is active, at the current Cursor location. To Mark a Waypoint: 1. Highlight Mark on the Navigation X-Press™ menu. 2. Use the RIGHT 4-Way Cursor Control key to mark the location of a Waypoint. Zoom Zoom allows you to change the scale of [...]

Waypoint [Name] (Only with an active cursor on a waypoint) Waypoint [Name] allows you to view the Waypoints submenu for the waypoint under your cursor. To view the Waypoint [Name] Submenu: 1. Move the cursor onto an existing waypoint and press the MENU key once, or use Cursor to Waypoint to select a waypoint from a list of saved waypoints. 2. Highl[...]

Cursor to Waypoint (Chart or Combo view only) Cursor to Waypoint allows you to quickly move the cursor to any saved waypoint, so that you can locate it or edit it. NOTE: This X-Press™ menu item appears only if you have saved waypoints. To move cursor to a saved waypoint: 1. Highlight Cursor to Waypoint on the Navigation X-Press™ menu. 2. Use th[...]

Skip Next Waypoint (Only When Navigating) Skip Next Waypoint removes the next waypoint from the current route. This menu choice will only appear when you are currently navigating a route. To Skip Next Waypoint: 1. Highlight Skip Next Waypoint on the Navigation X-Press™ menu. 2. Use the RIGHT 4-WAY Cursor Control key to initiate skipping the next [...]

Remove Grid (Only if a Grid is Active) Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid has already been applied to a waypoint. To Remove a Grid: 1. Highlight Remove Grid on the Navigation X-Press™ menu. 2. Use the RIGHT 4-WAY Cursor Control key to remove the grid. Sonar Window (Combo View only[...]

The Waypoint Submenu contains the following menu choices: Edit allows you to edit the Name, Position (Latitude and Longitude) and select the Icon that will be used to represent the waypoint in the Chart and Combo Views. Delete allows you to delete a waypoint from the list of saved waypoints. Go To allows you to select a waypoint and start navigatio[...]

Navigation Menu Tab Press the MENU key twice to access the Main Menu System, then press the RIGHT cursor key to select the Navigation tab. NOTE: Menu choices will vary depending on system settings. The Navigation Menu Tab will be added to the menu system when the GR16 is connected to your Fishing System, and the following menu choices will appear i[...]

Current Track Current Track allows you to view the Current Track submenu. To view the Current Track Submenu: 1. Highlight Current Track on the Navigation main menu. 2. Use the RIGHT 4-WAY Cursor Control keys to view the Current Track submenu. The Current Track Submenu contains the following menu choices: Save Current Track allows you to save the cu[...]

Waypoints Waypoints allows you to view the Waypoints submenu. To view the Waypoints Submenu: 1. Highlight Waypoints on the Navigation main menu. 2. Use the RIGHT 4-WAY Cursor Control keys to view the Waypoints submenu. The Waypoints Submenu contains the following menu choices: Create allows you to create a new waypoint and edit it immediately. The [...]

View Orientation View Orientation allows you to select whether the Track and Combo Views should be drawn North-Up or Course-Up. To change the View Orientation setting: 1. Highlight View Orientation on the Navigation main menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the View Orientation setting. (North-Up, Course-Up, Default = [...]

34 Trackpoint Interval Trackpoint Interval allows you to select the time period between trackpoints. The current track can only contain up to 2000 trackpoints, so longer time periods cause the track to extend back further in time, but will be less detailed. NOTE: Trackpoint Interval works in conjunction with Track Min Distance. Both conditions must[...]

Map Datum (Advanced) Map Datum allows you to change the map coordinate system used by the Fishing System to match those of a paper map. The Map Datum menu choice is only available when User Mode is set to Advanced (see Setup Menu Tab: User Mode ). NOTE: See Setup Menu Tab: User Mode in your Fishing System Operations manual. To change the Map Datum [...]

Alarms Menu Tab From any view, press the MENU key twice to access the Main Menu System. The Alarms tab will be the default selection. NOTE: When an alarm is triggered, you can silence it by pressing any key. The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected. The following menu choice[...]

Off Course Alarm Off Course Alarm sounds when the boat has moved too far off course based on the menu setting when navigating. Off Course Alarm allows you to set how far the boat is allowed to move off course before the Off Course Alarm will sound. To change the Off Course Alarm setting: 1. Highlight Off Course Alarm on the Alarms main menu. 2. Use[...]

Drift Alarm Drift Alarm sounds when the boat has exceeded the distance from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the size of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter, the Drift Alarm will sound. To change the Drift Alarm setting: 1. H[...]

Setup Menu Tab From any view, press the MENU key twice to access the tabbed Main Menu System, then press the RIGHT cursor key until the Setup tab is selected. NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode and what accessories are attached to the unit. The following menu choices will[...]

Units - Distance Units - Distance selects the units of measure for all distance- related readouts. To change the Units - Distance setting: 1. Highlight Units - Distance on the Setup menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute Mile[...]

Local Time Zone (Advanced) Local Time Zone selects your time zone in reference to the time reported by the GPS receiver when Time+Date is selected as a Digital Readout on the Sonar View (see Select Readouts ). This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode. ) NOTE: See Setup Menu Tab: Select Readouts an[...]

Position Format (Advanced) Position Format selects the format of the latitude and longitude position display. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode. ) NOTE: See Setup Menu Tab: User Mode in your Fishing System Operations manual. To change the Position Format setting: 1. Make sure you are in Adv[...]

Date Format (Advanced, International only) Date Format changes the date format used by the unit. This menu choice is available only when in Advanced User Mode (see S etup Menu Tab: User Mode .) International Models only . Date Format selects the format for the date display when Time + Date is selected as a Digital Readout on the Sonar View. (see Se[...]

To turn NMEA Output on or off: 1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup menu. 2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or Off (Off, On, Default = Off) 44[...]

Troubleshooting Before contacting the Humminbird® Customer Resource Center, please read the following section. Taking the time to review these troubleshooting guidelines may allow you to solve a performance problem yourself, and therefore avoid sending your unit back for repair. Fishing System Doesn’t Power Up If your Fishing System doesn’t po[...]

Display Problems There are several main conditions or sources of possible interference that may cause problems with the quality of the information displayed on the control head. Look in the following table for some symptoms of display problems and possible solutions: Problem Possible Cause The control head loses power at high speeds. When the boat [...]

Finding the Cause of Noise Electrical noise usually affects the display with many black dots at high speeds, and high sensitivity readings. One or more of the following sources can cause noise or interference: Possible Source of Noise Isolation Other electronic devices The boat’s engine Cavitation from the boat’s propeller Turn off any nearby e[...]

Humminbird® Accessories Accessories customize your Fishing System to your needs and enable you to stay on the edge of new technology. When an accessory is connected to the Fishing System, additional menus and readouts are added automatically to the Main Menu System. Accessories available today that are supported by your Fishing System include: Wea[...]

GPS & Navigation Glossary Acquisition Time: The length of time that a GPS receiver typically takes to determine a position from at least three satellites. Humminbird® GPS receivers provide very fast acquisition times (under one minute), permitting users to get out on the water faster. Alarm, Arrival: The audible alert that sounds when the boat[...]

ground stations around the coastal United States and on some inland waterways. These correction signals are provided by the USCG and received by an auxiliary Differential Beacon Receiver (DBR) that connects to the GPS receiver. The advent of WAAS has largely negated the need for the added expense of a DBR in the United States. Distance To Go: Dista[...]

MMC is a very rugged format suitable for the marine environment, but it is not waterproof. The MMC is removable from Humminbird® products, and can be used in a PC that is equipped with an appropriate card reader. MMC is the same format that many digital cameras use. See SD . North, Magnetic: North is the principle reference point of the compass (i[...]

across a given distance, and is the speed measurement provided by GPS. An alternate, Speed Through Water, is provided by a speed paddlewheel, and is the measurement of the flow past the boat, which may vary depending on current speed and direction. Speed Over Ground is optimal for navigation because accurate destination times can be derived from th[...]

signal, GPS accuracy is improved to within 3 meters 95% of the time. Outside the United States, regional governmental coalitions have created similar systems such as EGNOS (Europe) and MSAS (Japan). Waypoint: A Waypoint is the saved location (latitude, longitude) of a point of interest that is stored in a GPS receiver’s memory. This can include a[...]

Notes: 54[...]

55 Contact Humminbird® Contact the Humminbird® Customer Resource Center in any of the following ways: By Telephone: (Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time): 1-800-633-1468 By e-mail: (typically we respond to your e-mail within three business days): custserv@johnsonoutdoors.com For direct shipping, our address is: Humminbird[...]