Hunter Fan 42857-01 инструкция обслуживания

T ype 2A Models T ype 2A Models T ype 2A Models Form# 42857-01 20100217 ©2010 Hunter Fan Co. For Y our Records and W arranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. _________________________[...]

2 42857-01 • 02/17/10 • Hunte r Fan Company T ab le Of Contents Preparing the F an Site ................. 3 1 • Getting Ready ...................... 6 2 • Installing the Hanger Brack et .......7 3 • Ass embling and Hanging the Fan . . . 8 4 •Wiring the Fan ......................9 5 • Installing the Motor Housing ....... 1 0 6 • Ass [...]

3 42857-01 • 02/17/10 • Hunte r Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From W all or Nearest Obstruction St ep 1 - Ch oo se th e F an Site Proper ceiling fan loc ation and at tachment to the building struct ure ar e ess ent ial for safety, r eliable operation, maximum eciency, and e nergy savings . Choos e[...]

4 42857-01 • 02/17/10 • Hunte r Fan Company P r e p a r i n g t h e Fa n S i t e ( c o n t i n u e d ) CAUT ION: All wiring must b e in accordance wi th national and local electrical cod es and ANSI/NFP A 70. If you are unfamiliar with wiring, use a qualied electrician. Steps 2 – 3 Step 4 Step 5 St ep 2 - Cut th e Ce ilin g Hole 2-1. Locat[...]

5 42857-01 • 02/17/10 • Hunte r Fan Company M o u n t i n g a n d O p t i o n a l A c c e s s o r i e s Understan ding Mountin g Hunte r ’ s patent ed mounting syste m provides you maximum eas e in installing your fan. is fan was de signed to be mounted only on at ceilings and can b e use d on ceilings less than 8 feet high. Consi derin[...]

6 42857-01 • 02/17/10 • Hunte r Fan Company T o install a ceiling fan, be sure you can do the following: • Loc ate the c eiling joist or other suitable suppor t in ceiling. • Drill hole s for and install woo d screws. • Identif y and connect ele ctrical wires. • Lift 40 p ounds. If you need help installing the fan, your Hunter fan deale[...]

7 42857-01 • 02/17/10 • Hunte r Fan Company 2 • I n s t a l l i n g t h e H a n g e r B r a c k e t CAU TION: T o avoid possible ele ctrical shock , be fore ins talling your f an, disconnect the p ower by t urning o the circuit br eakers t o the outlet box and asso ciated wall switc h loc ation. If you cannot lock the circuit br eakers in [...]

8 42857-01 • 02/17/10 • Hunte r Fan Company Step 3-2 #8-32 x 1” Screw Green Ground Wir e 3-1. Posit ion the square hanger so tha t the green gr ound wire at tached to the squar e faces out of the large opening in the metal bracket. 3-2. Holding the wires out of the way , li ft the motor assembly and place the square hange r into the opening i[...]

9 42857-01 • 02/17/10 • Hunte r Fan Company All wiring must b e in accorda nce with national and lo cal ele c trical code s and ANSI/NFP A 70. If you are unfamiliar with wiring , u se a qualifie d elec trician. W all swit ches are not included. Sele ct an acceptable general-use switch in accordanc e with nat ional and lo cal electrical co des [...]

10 42857-01 • 02/17/10 • Hunte r Fan Company 5-1. Place the fan housing over the mot or . 5-2. Align the keyholes in the fan housing with the two par tially installed canopy s crews in the hange r bracket. Rotate the fan housing to sit uate the screws in the na rrow ends of the k eyholes . 5-3. Install the two remaining canopy screws into t he [...]

11 42857-01 • 02/17/10 • Hunte r Fan Company Step 6-1 (Deta il) Grommet Blade Ass embly Screws Use with grommet Use without grommet Hunte r fans us e several styl es of fan blad e irons (brack ets that hold the blade to the fan). 6-1. Y our f an may inc lude blad e grommets. If your f an has grommets, insert them by hand int o the holes on the [...]

12 42857-01 • 02/17/10 • Hunte r Fan Company Y our Hunter fan comes with an int egrated light xt ure assembly and an optional swit ch housing cap and plug b utton. i s feat ure gives you the option of installing the fan with OR without t he included light xtur e. e steps below direct you whether or not you ar e installing a light ?[...]

13 42857-01 • 02/17/10 • Hunte r Fan Company Lower Swit ch Housing Plug Connector Housing Ass embly Screw Plug Connector Detail Steps 7-6 – 7-7 7-6. T o attach the lower swit ch housing , connect the upp er plug connector from the motor to t he lower plug connec tor in the lower switc h housing as sembly . Note: Both plug conne ctors are po l[...]

14 42857-01 • 02/17/10 • Hunte r Fan Company Installing the Gl ass Bowl 7-8. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-9. read the light and fan pull chains through the hole in the center of the glass bowl. en, thread the light pull chain through the hole in the center of the cover plate. 7-10. read the f[...]

15 42857-01 • 02/17/10 • Hunte r Fan Company 7 • C o m p l e t i n g Y o u r I n s t a l l a t i o n W i t h o r W i t h o u t a B o w l L i g h t F i x t u r e ( C o n t i n u e d ) Uninstalling the Lig ht Fixture 7-14. T o uninstall the light xt ure, rst disconnect the plug connec tors betw een the black wire and t he black/white wire[...]

16 42857-01 • 02/17/10 • Hunte r Fan Company In warm weather , us e downward air ow patt ern In cold weather , us e upward air ow pattern 8-1. T urn on elec trical power to the fan. 8-2. e fan pull chain contr ols power to the fan. e pull chain has four settings in se quence: High, Medium, Low , and O . • Pull the c hain slowly[...]

17 42857-01 • 02/17/10 • Hunte r Fan Company Problem: No thing happens; f an do es no t move. 1. T urn power on, replace fuse , or reset break er . 2. Lo osen c anopy , check all connections accor ding to the wiring the fan se ction. 3. Check the plug conne ction in the switc h housing . 4. Push motor reversing swit ch rmly left or right to [...]