Hunter Westover Four Seasons Heater Fan инструкция обслуживания

T ype 3 Models T ype 3 Models T ype 3 Models Form# 45003-01 20110712 ©2011 Hunter Fan Co. For Y our Records and W arranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. ____________________________[...]

2 45003-01 • 07/12/2011 • Hunte r Fan Company T ab le Of Contents Preparing the F an Site ................. 3 1 • Getting Ready ...................... 6 2 • Installing the Hanger Brack et ....... 7 3 • Ass embling and Hanging the Fan ... 8 4 •Wiring the Fan ...................... 9 5 • Installing the Canopy and Canopy T rim Ring .....[...]

3 45003-01 • 07/12/2011 • Hunte r Fan Company 7’ Minimum Blades to Flo or 8’ Minimum Ceiling Height 30” From W all or Nea rest Obstruction St ep 1 - Ch oo se th e F an Site Proper ceiling fan loc ation and at tachment to the building struct ure ar e ess ent ial for safety, r eliable operation, maximum eciency, and e nergy savings . Cho[...]

4 45003-01 • 07/12/2011 • Hunte r Fan Company Pr epa ring th e F an Sit e ( continu ed) C AU TI O N : All wiring must b e in accordance wi th national and local electrical cod es and ANSI/NFP A 70. If you are unfamiliar with wiring, use a qualied elec trician. Steps 2 – 3 Step 4 Step 5 St ep 2 - Cut th e Ce ilin g Hole 2-1. Locate the site[...]

5 45003-01 • 07/12/2011 • Hunte r Fan Company Ins t aller ’ s Choice a nd O ptional Acc ess orie s Understan ding Mountin g and Instal ler’ s C hoic e ® Hunte r ’ s patent ed mounting syste m provides you maximum installation exibility and ease . Y ou can install your Hunter fan in one of two ways, dep ending on ceiling height and you[...]

6 45003-01 • 07/12/2011 • Hunte r Fan Company T o install a ceiling fan, be sure you can do the following: • Loc ate the c eiling joist or other suitable suppor t in ceiling. • Drill hole s for and install woo d screws. • Identif y and connect ele ctrical wires. • Lift 40 p ounds. If you need help installing the fan, your Hunter fan dea[...]

7 45003-01 • 07/12/2011 • Hunte r Fan Company 2-1. Drill two pil ot holes into the woo d suppor t structur e thr ough the outermost holes in the outlet box. e pilot ho les should b e 9/64” in diamete r . No te: Y our fan comes with four pre-ins talle d neoprene noise iso lator s . 2-2. read the lead wir es from the outlet box down thr o[...]

8 45003-01 • 07/12/2011 • Hunte r Fan Company 3-1. T o ass emble f an to hang down from a at or angled ceiling, place the canopy and canopy trim ring around t he adapter so that they rest on the fan assembly . 3-2. Feed the wires from the fan thr ough the downrod. No te: Make sure all the wir es are on the same side of the metal dowel pin in[...]

9 45003-01 • 07/12/2011 • Hunte r Fan Company All wiring must b e in accorda nce with national and lo cal ele c trical code s and ANSI/NFP A 70. If you are unfamiliar with wiring , u se a qualified electrician. W all swit ches are not included. Sele ct an acceptable general-use switch in accordanc e with nat ional and lo cal electrical co des [...]

10 45003-01 • 07/12/2011 • Hunte r Fan Company 5-1. Partially install two canopy s crews (about 2 full turns) in the hanger bra cket. 5-2. Rais e the canopy over the hange r bracket. Align partially installed screws with key slots in canopy . 5-3. T wist canopy clo ckwise to secure. 5-4. Install third & fourth canopy screw in round hole on [...]

11 45003-01 • 07/12/2011 • Hunte r Fan Company Step 6-1 (Deta il) Grommet Blade Ass embly S cre ws Use with grommet Use without grommet Hunte r fans us e several styl es of fan blad e irons (brack ets that hold the blade to the fan). 6-1. Y our f an may inc lude blad e grommets. If your f an has grommets, insert them by hand int o the holes on [...]

12 45003-01 • 07/12/2011 • Hunte r Fan Company Y our Hunter fan comes with an int egrated light xt ure assembly . W ARNING: Use only the light xtur e supplied with this fan model. 7-1. T o attach the upper switch housing, par tially install two housing assembly s crews into t he switch housing mount ing plate. 7-2. Feed the upper plug con[...]

13 45003-01 • 07/12/2011 • Hunte r Fan Company Lower Swit ch Housing Plug Connector Housing Ass embly Screw Plug Connector Det ail Steps 7-5 – 7-6 7-5. T o attach the lower swit ch housing , connect the upp er plug connector from the motor to t he lower plug connec tor in the lower switc h housing as sembly . No te: Bo th plug connectors are [...]

14 45003-01 • 07/12/2011 • Hunte r Fan Company 7 • C ompletin g Y our Instal lation With a Bow l Lig ht F i xture ( Continu ed) Installing the Gl ass Bowl 7-7. First install B10 candelabra bulbs (40 Watt Maximum) into the sockets. 7-8. Place the glass bowl over the heat er vent, ensuring the t hreaded por tion of the heate r vent comes out of[...]

15 45003-01 • 07/12/2011 • Hunte r Fan Company 8-1. T o install the batte r y , re move the back cover of the r emote. Insert the included 12-v olt alkaline battery (T yp e 23A , MN-21 or equivalent) inside the r emote, mat ching polarit y on the batte r y as indicated by the + and - symbols in the battery compar tment. Replace the cove r . If [...]

16 45003-01 • 07/12/2011 • Hunte r Fan Company 8 • A ssemblin g th e R emot e Cont rol a nd M ountin g th e Cradle ( Contin ued) Se tting the DIP swi tches Y ou will only have to ch ange the DIP switch sett ings in the remote if you ar e using more than one remot e contr olled f an in the same area and want t o contr ol them separately . Y ou[...]

17 45003-01 • 07/12/2011 • Hunte r Fan Company Normal Operation: e heat er must be turned o. Heater Function: make sur e the ceiling fan is t urned o A UT O RESUME FE A TUR E is fan contains a rece iver with an auto r esume feat ure. e receive r remembers the in tensity of the light, spee d and direction of the fan, and whether t[...]

18 45003-01 • 07/12/2011 • Hunte r Fan Company 10 • T rou blesh oot ing Problem: No thing happens; f an do es no t move 1. T urn power on, replace fuse , or reset break er . 2. Lo osen c anopy , check all connections accor ding to the wiring the fan section. 3. Check the plug conne ction in the switc h housing . 4. Push motor reversing swit c[...]