Husqvarna 325HD75X инструкция обслуживания

E E E E n n n n g g g g l l l l i i i i s s s s h h h h 323HD60 325HD60 X-series 325HD75 X-series Oper ator ′ s manual Please r ead the operator’ s manual carefully and mak e sure you understand the instructions befor e using the machine.[...]

KEY T O SYMBOLS 2 – English Symbols W ARNING! Incorrect or careless use of a hedge trimmer can tur n it into a dangerous tool that can cause serious or ev en fatal injury . It is extremely important that you read and understand the contents of this operator’ s manual. Please read the operator’ s manual carefully and make sure y ou understand [...]

CONTENTS English – 3 Contents Note the f ollowing bef ore starting: Please read the oper ator’ s manual carefully . KEY T O SYMBOLS Symbols ................................................................ 2 CONTENTS Contents ............................................................... 3 Note the follo wing before starting: ..................[...]

4 – English INTR ODUCTION Dear Customer , Cong ratulations on your choice to b uy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River , for production of muskets . The location was logical, since w ater power was har[...]

English – 5 WHA T IS WHA T? What is what? 1 Operator ′ s manual 2 Grease filler cap, be vel gear 3 Gear 4 Blades 5 Blade guard 6 F ront handle 7 Cylinder cov er 8 Star ter handle 9 Stop switch 10 Throttle lock 11 Adjustable handle 12 Throttle control 13 Lock f or handle (325HD60, 325HD75) 14 Fuel tank 15 Fuel cap 16 Air purge 17 Choke control [...]

GENERAL SAFETY PRECA UTIONS 6 – English Impor tant P ersonal protective equipment HEARING PR O TECTION Wear hearing protection that provides adequate noise reduction. EYE PRO TECTION Alwa ys wear approved e ye protection. If you use a visor then you must also w ear approved protectiv e goggles. Approv ed protective goggles must comply with standa[...]

GENERAL SAFETY PRECA UTIONS English – 7 CLO THING Wear clothes made of a strong f abric and avoid loose clothing that can catch on twigs and branches. Alwa ys wear heavy , long pants. Do not wear je weller y , shorts sandals or go barefoot. Secure hair so it is abo ve shoulder lev el. FIRST AID KIT Alwa ys have a first aid kit nearb y . Mac hine[...]

GENERAL SAFETY PRECA UTIONS 8 – English Stop s witch Use the stop s witch to switch off the engine . Star t the engine and make sure the engine stops when you mov e the stop switch to the stop setting. Hand guar d The hand guard pre vents hands from coming into contact with the moving blades , for e xample, if the operator loses grip on the front[...]

GENERAL SAFETY PRECA UTIONS English – 9 Nev er use a machine that has a faulty muffler . Regularly check that the muffler is securely attached to the machine. Blades T o ensure good cutting results it is impor tant that the contact pressure between the blades is correct. The contact pressure is adjusted by turning the screws on the underside of[...]

FUEL HANDLING 10 – English Fuel safety Nev er star t the machine: 1 If you ha ve spilt fuel on it. Wipe off the spillage and allow remaining fuel to e vaporate. 2 If you ha ve spilt fuel on yourself or y our clothes, change your clothes. W ash any par t of your body that has come in contact with fuel. Use soap and water . 3 If the machine is leak[...]

FUEL HANDLING English – 11 Mixing • Alwa ys mix the petrol and oil in a clean container intended for fuel. • Alwa ys star t by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol. • Mix (shake) the fuel mixture thoroughly bef ore filling the [...]

ST AR TING AND ST OPPING 12 – English Check bef ore star ting • Inspect the working area. Remove an y objects that could be thrown out. • Check the cutting attachment. Ne ver use blades that are dull, crack ed or damaged. • Check that the machine is in perf ect working order. Check that all nuts and scre ws are tight. • Make sure the gear[...]

ST AR TING AND ST OPPING English – 13 CA UTION! Do not pull the star ter cord all the wa y out and do not let go of the star ter handle when the cord is fully extended. This can damage the machine. Stopping The engine is s witched off by moving the stop switch to the stop position. CA UTION! The stop switch automatically returns to the star t pos[...]

W ORKING TECHNIQ UES 14 – English General working instructions P ersonal protection • Wear personal protectiv e equipment. See instr uctions under the heading ”P ersonal protective equipment”. • Alwa ys wear working clothes and heavy-duty long trousers. • Nev er wear loose clothing or jewellery . • Make sure y our hair does not hang b[...]

W ORKING TECHNIQ UES English – 15 • When the engine is switched off , keep your hands and feet a way from the cutting attachment until it has stopped completely . • W atch out for stumps of branches that can be thrown out during cutting. • Do not cut too close to the ground. Stones and other objects can be thrown out. • Check the working [...]

MAINTENANCE 16 – English Carburettor Y our Husqv ar na product has been designed and manuf actured to specifications that reduce har mful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. T o ensure that it continues to run at peak performance and to minimise harmful exhaust emissions after the running-in period,[...]

MAINTENANCE English – 17 cause fire if directed against dry and combustible material. Some mufflers are equipped with a special spark arrestor mesh. If your machine has this type of muffler , you should clean the mesh at least once a week. This is best done with a wire brush. On mufflers without a catalytic conv er ter the mesh should be clea[...]

MAINTENANCE 18 – English CA UTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/ cylinder . Check that the spark plug is fitted with a suppressor . Air filter The air filter must be regularly cleaned to remov e dust and dir t in order to av oid: • Carburettor malfunctions • Star ting problem[...]

English – 19 MAINTENANCE Maintenance schedule The follo wing is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carr y out the maintenance and ser vice work described in this Operator’ s Manual. More extensiv e work must be carried out by an authoriz[...]

20 – English TECHNICAL D A T A T ec hnical data Note 1: Noise emissions in the environment measured as sound power (L W A ) in conformity with EC directive 2000/14/ EC. Reported sound power le vel for the machine has been measured with the original cutting attachment that gives the highest lev el. The diff erence between guaranteed and measured s[...]

English – 21 TECHNICAL D A T A EC-declaration of conf ormity (Applies to Europe onl y) Husqvarna AB , SE-561 82 Huskv ar na, Sweden, tel: +46-36-146500, declare under sole responsibility that the hedge trimmers Husqvarna 323HD60, 325HD60 and 325HD75 from 2009’ s serial numbers and onwards (the year is clearly stated in plain text on the type pl[...]

[...]

[...]

[...]

[...]

[...]

[...]

1153242-26 ´®z+U86¶6)¨ ´®z+U86¶6)¨ 2010-03-10 Original instructions[...]