Husqvarna 326HDA55X-Series, 326HE3X-Series, 326HE4X-Series инструкция обслуживания

Oper ator's manual (C ARB II, EP A II) 326HD A55 X-series 326HE3 X-series , 326HE4 X-series Please read these instructions car efully and make sur e you understand them bef ore using the machine. English[...]

2 – English SYMBOL EXPLANA TION W ARNING! The hedge trimmer can be dangerous! Careless or incorrect use can result in serious, even fatal injury . Read through the O perator‘ s Manual carefully and understand the content before using the hedge trimmer . Always use • Ear protection • Appro ved eye pr otection Symbols • This product is in a[...]

English – 3 List of contents SYMBOL EXPLANA TION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS P ersonal protective equipment ............................................. 4 The machine ?[...]

4 – English The machine’ s protective equipment This section describes the hedge trimmer ’ s protective equip- ment, its function and how checks and maintenance ar e carried out to ensure that it operates corr ectly . (See the chapter ”What is what” to locate where this equipment is positioned on your machine.) IMPORT ANT INFORMA TION •[...]

English – 5 4. Vibration damping system The hedge trimmer is equipped with a vibration damping system, which is designed to give as vibra- tion-free and comfortable use as possible. The hedge trimmer ’ s vibration damping system reduces the transfer of vibrations between the engine unit/blades and the hedge trimmer ’ s handles. The engine bod[...]

6 – English 2. Stop switch • Start the engine and make sure that the engine stops when the stop switch is moved to the stop position. 3. Hand guard (326HDA55, 326HE3) • Ensure that the blade guard is fitted correctly . • Make sure the hand guard is not damaged in anyway . 4. Vibration damping system • Check the vibration damping element r[...]

English – 7 SAFETY INSTR UCTIONS 5. Muffler • N ever use a machine that has a defective muffler . • Check regularly that the muffler is secure. • If your muffler is fitted with a spark arrest screen then it should be cleaned regularly . A blocked screen leads to the engine overheating with serious damage as a result. N ever use a muffler wi[...]

8 – English Fuel safety • Always use a fuel container with an anti- spill valve. • N ever fill the machine while the engine is running. Always stop the engine and let it cool for a few minutes before refuelling. • Pr ovide good v entilation when filling or mixing fuel (petrol and 2-stroke oil). • Mo ve the machine at least 3 m from the fi[...]

English – 9 SAFETY INSTR UCTIONS Safety instructions when using the hedge trimmer ! Protective instructions while working • Always ensure you have a safe and firm working position. • Always use both hands to hold the machine. Hold the machine on the side of the body . • U se your right hand to operate the throttle. • Make sure that your h[...]

10 – English Basic working techniques • W ork with a swinging action from the bottom upwards when trimming sides. • Adapt the throttle according to resistance. • When trimming a hedge the engine should always be turned away from the hedge. • The hedge trimmer should be held as close to the body as possible to get the best balance. • Mak[...]

English – 11 15 Choke 16. F uel pump 17. Air filter co ver 18. Clutch co ver 19. Hand guar d fastening scre w (326HDA55, 326HE3) 20. Handle angle adjuster (326HE3, 326HE4) 21. Angle adjuster knob 22. Hand guar d (326HDA55, 326HE3) 23. Angle adjuster 24. S park plug spanner 25. Operator ’ s manual 26. T ransport guard 27. Allen key 27. Harness ([...]

12 – English ASSEMBL Y Fitting the hand guard and loop handle(326HDA55/326HE3) 1. Assemble the hand guard and loop handle by screwing them together . T ake care to align the holes in both parts. 2. Slide the loop handle and the hand guard onto the shaft. 3. Slide the spacer into the slot in the loop handle. 4. F it the nut and bolt. Do not over-t[...]

English – 13 FUEL HANDLING • Clean around the fuel cap. Contamination in the tank can disrupt operations. • Ensure that the fuel is well mixed by shaking the container before filling the tank. 5 10 15 20 2% (1:50) 0,10 0,20 0,30 0,40 3% (1:33) 0,15 0,30 0,45 0,60 Gasolin Benzin Essence Gasolina Lit. Oil • Ö l Huile • Aceite Lit. 1 2 1/2 [...]

14 – English W ARNING! The gearbox and clutch drum must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury . Always move the hedge trimmer about 3 metres from the filling position before starting. Place the machine on a flat surface. Bear in mind that the blades start to move when the engine i[...]

English – 15 Fine adjustment • When the machine has been ” run-in ” the carburettor should be finely adjusted. The fine adjustment should be carried out by qualified person. First adjust the L-jet, then the idling screw T and then the H-jet. Conditions • Before any adjustments are made the airfilter should be clean and the airfilter cover[...]

16 – English Adjusting the idle speed, T Adjust the idling speed with the screw T , if it is necessary to readjust. F irst turn the idle speed adjusting screw T clockwise until the cutting attachment starts to rotate/ mo ve. Then turn, counter-clock- wise until the cutting attachment stops. A correctly adjusted idle speed setting occurs when the [...]

English – 17 Cooling system T o maintain as low operat- ing temperature as possible the engine is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. Cooling fins on the cylinder 4. Cylinder cov er (leads cold air onto the cylin- der). Clean the cooling system u[...]

18 – English MAINTENANCE Air filter The air filter (A) should be cleaned regularly remo ving dust and dirt to avoid: • carburettor malfunction • starting problems • reduced engine power • unnecessar y wear to engine parts • abnormal fuel consumption Clean the filter after every 25 hours or more r egularly if operating conditions are exc[...]

English – 19 MAINTENANCE Maintenance schedule Below you will find some general maintenance instructions. Daily maintenance • Check throttle trigger and throttle trigger lockout function. • Check stop switch function. • Check that the blades do not rotate while idling or when the choke is in the start position. • Clean the exterior of the [...]

20 – English 326HE4 1,50/24,5 1,34/34 1,06/27 2 700 10 000 0,9 kW/9 000 r/min Ye s Ye s W albr o MB Champion R CJ 6Y 0,02/0,5 Zama C1Q 1,06/0,5 13,4/6,1 91 2,2/1,8 5,9/4,8 550 4185 TECHNICAL D A T A 326HDA55 1,50/24,5 1,34/34 1,06/27 2 700 10 000 0,9 kW/9 000 r/min Ye s Ye s W albro MB Champion R CJ 6Y 0,02/0,5 Zama C1Q 1,06/0,5 12,8/5,8 91 3,5/1[...]

English – 21 WHAT IS COVERED REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Husqvarna Forest & Garden servicing dealer. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing deale[...]

22 – English ´+H'•¶3~¨[...]

English – 23[...]

2001W51 ´+H'•¶3~¨ 114 00 79-93[...]