Husqvarna DS50 инструкция обслуживания

HUSQV ARNA CONSTRUCTION PRODUCTS GB ES DE FR Oper ator’ s manual Please read the operator’ s manual car efully and mak e sure you understand the instructions bef ore using the machine. Manual de FR GB ES DE instrucciones Lea detenidamente el manual de instrucciones y asegúr ese de entender su contenido antes de utilizar la máquina. Bedienungs[...]

2 – English KEY T O SYMBOLS Symbols on the machine: W ARNING! The machine can be a dangerous tool if used incorrectly or carelessly , which can cause serious or fatal injur y to the operator or others . Please read the operator’ s manual carefully and make sure y ou understand the instructions before using the machine . Alwa ys wear : • Appro[...]

English – 3 CONTENTS Contents KEY T O SYMBOLS Symbols on the machine: ............................................. 2 Symbols in the operator’ s manual: ............................... 2 CONTENTS Contents ...................................................................... 3 WHA T IS WHA T? What is what on the stand? .........................[...]

4 – English WHA T IS WHA T? What is what on the stand? 19 1 2 3 5 8 10 11 12 13 14 15 22 18 21 20 16 23 27 30 24 31 25 29 28 28 28 26 17 4 6 7 9 1 Locking scre w 2 Spirit lev el 3 Locking scre w , locking clamp 4 F eeder housing lock 5 Locking scre w dr ill column 6 P osition ring 7 Locking scre w , position r ing 8 Adjustment screws 9 Locking sc[...]

English – 5 SAFETY INSTR UCTIONS Steps before using a ne w stand • Please read the operator’ s manual carefully and mak e sure you understand the instructions bef ore using the machine. • This machine is designed f or and intended f or drilling concrete, brick and diff erent stone materials. All other use is improper . • The machine is in[...]

6 – English SAFETY INSTR UCTIONS General safety precautions • Please read the operator’ s manual carefully and mak e sure you understand the instructions bef ore using the machine. • Ne ver use the machine if y ou are tired, if you hav e drunk alcohol, or if you are taking medication that could aff ect your vision, y our judgement or your c[...]

English – 7 PRESENT A TION Stand DS50 and DS70 It is our wish that you will be satisfied with y our product and that it will be your companion f or a long time. Think of this operator ′ s manual as a v aluable document. By f ollowing its ′ content (using, ser vice , maintenance etc) the lif e span and the second-hand value of the machine can[...]

8 – English PRESENT A TION Accessories • W ater collector • Quick mounting f or automatic feed unit (both sides of f eeder housing) • Retaining ring • Expander • Distance • Stabilizer F or extra support.[...]

English – 9 ASSEMBL Y Assembling the stand 1 Drill holes (15 mm) in the floor or in the wall and knock in the e xpander bolts. 2 Screw the base plate tight. Check carefully that the e xpander is secured correctly . • The drill column is mounted on the base plate’ s angle brac ket. F asten the locking scre w with a 24 mm spanner . The drill c[...]

10 – English ASSEMBL Y Bef ore drilling ! W ARNING! Before drilling, chec k that all locking scre ws are tightened well. Serious accidents can occur if the concrete core remains in the drill when backing out the drill motor/drill from the floor , wall or ceiling. ! W ARNING! If the vacuum plate is used, make sure the support surface is not porou[...]

English – 11 MAINTENANCE Stand maintenance The lif etime of your machine can be e xtended considerably if it is used, cared f or and maintained in the proper manner . Cleaning and lubrication • It is impor tant that the drill stand is kept clean f or functionality to be maintained. • Clean the stand using a high pressure washer and then wipe [...]

12 – English TECHNICAL D A T A Dimensions Stroke , mm/inch --------------------- Expander ------------- Max. drill diameter , mm/inch DS50, mm/inch DS70, mm/inch 1 438/17,2 438/17,2 2 320/12,6 340/13,4 3 526/20,7 546/21,5 4 235/9,3 265/10,4 5 971/38,2 1026/40,4 6 1140/44,9 1205/47,4 7 177/7,0 - 8 231/9,1 - 9 1158/45,6 - 10 450/17,7 - DS50 0-676/0[...]

English – 13 TECHNICAL D A T A The column's angling W eight DS50, kg/lbs DS70, kg/lbs 1 Drill column 6,7/14,7 9,1/20,0 2 F eeder housing 7,8/17,2 9,7/21,3 3 Quick mounting 0,6/1,3 0,6/1,3 4 F eed le ver - 0,8/1,8 5 F eed le ver 0,8/1,8 - 6 Base plate 9,2/20,2 12,0/26,4 7 T ranspor t wheels 4,1/9,0 4,1/9,0 T otal weight without stabilizer 29,[...]

14 – English TECHNICAL D A T A EC-declaration of conf ormity (Applies to Eur ope only) Husqv arna Construction Pr oducts , SE-433 81 P ar tille, Sweden, tel: +46-31-949000, declares under sole responsibility that the stands Husqvarna DS50A T and DS70A T from 2007’ s serial numbers and onwards (the y ear is clearly stated in plain text on the ty[...]

w ww .husqvarnacp.com 1 150979-20 2007-09-26 ´®z+RLT¶07¨ ´®z+RLT¶07¨[...]