hussman IGUP-RED-0309 инструкция обслуживания

/Chino RED Refrigerated End Displa y Re v .0309 Installation & Operation Manual RED Refrigerated End Displa y p/n IGUP-RED-0309 INST ALLA TION & O PE RA T IO N GUIDE[...]

IGUP-RED-0309 2 /Chino A publication of Hussmann ® Chino 13770 Ramona A v enue • Chino , California 91710 (909) 628-8942 F AX (909) 590-4910 (800) 395-9229 K eep this booklet with the case at all times f or futur e r eference. THIS BOOKLET CONT AINS INFORMA TION ON: RED A narro w depth multi dec k air cur tain case designed to display pre-packag[...]

Rev.0 309 3 Cut & Plan Vie ws 23 1 / 8 " 12" 14" 18" 22 1 / 2 " 6 1 / 2 " 58 1 / 2 " 40 1 / 8 " 14 1 / 4 " RED Refrigerated Self Sevice End Display Scale = 1/2" 33 1 / 2 " 39" Elec. Ref. Drain 1" 33 1 / 2 " 72" ( Va r i able ) RED Plan View Scale = 1/4" 1" 39&q[...]

IGUP-RED-0309 4 LOCA TION The refrigerated mer chandisers hav e been designed f or use only in air conditioned stor es where temperatur e and humidity ar e maintained at or below 75°F and 55% rela- tive humidity . DO NO T allow air conditioning, electric fans, ov ens, open doors or windows (etc .) to cr eate air cur - r ents ar ound the merchandis[...]

Rev.0 309 5 Plumbing WASTE OUTLET AND P-TRAP The waste outlet is located in the center , 8" fr om the front of the case. A 7/8" P-trap and thr eaded adapter ar e supplied with each fixture. The P-trap must be installed to pr ev ent air leakage and insect entrance into the fixtur e . NOTE: PVC-DWV solvent cement is recommended. Follow Huss[...]

IGUP-RED-0309 6 Refrigeration REFRIGERANT TYPE The standard r efrigerant will be R-22 unless otherwise specified on the customer order . Check the serial plate on the case for information. PIPING The r efrigerant line outlets are located under the fixtur e at the left hand end when view ed from the back. Insulate the suction lines to pr ev ent cond[...]

Rev.0 309 7 Electrical WIRING COLOR CODE GREEN GROUND PURPLE ANTI-SWEA T ORANGE LIGHTS YELLO W RECEPT ACLE RED / BLACK T -ST A T /SOLENOID 230V BLACK / WHITE T - S TAT / S O L E N O I D 115V BRO WN F AN MOT ORS CASE MUST BE GROUNDED NOTE: Refer to label affixed to case to determine the actual configuration as checked in the “TYPE INSTALLED” box[...]

IGUP-RED-0309 8 Case Specifications Model Refrigeration A verage Disch. Air T~Stat Coil Fan Blade Qty . Defrosts Elec. Load (Amps) @ ~1 15 V AC & Btu / Hr . T emperatures (°F) Speed Settings T ype Size (in) & Evap. per day Fans Fans Case Shelf Length (Ft.) (T otal) Evap. Prod. Disch. (CFM) (°F) Pitch ( ° ) Fans Min. Qty . Eng. Eff. Std. [...]

Rev.0 309 9 Electrical Schematic DATE: PROJEC T TITLE: DRAWING #: DRAWN BY: PRODUC TION ORDER #: DRAWING TITLE: DATE: Hussmann Corporation, Int'l. 13770 Ramona Avenue Chino, CA. 91710 (909)-590-4910 Lic.#: 644406 REVISIONS: #: DESCR IPTION: CHECKED BY: BY: FILE LOCATION : D.QUAN --- PAGE OF  11 06/08/01 H:WIRESCHEMATICSNE WW IRE RED CASES[...]

IGUP-RED-0309 10 User Information STOCKING Improper temperatur e and lighting will cause serious prod- uct loss. Discoloration, dehydration and spoilage can be controlled with pr oper use of the equipment and handling of pr oduct. Product temperatur e should alwa ys be main- tained at a constant and pr oper temperature. This means that fr om the ti[...]

Rev.0 309 11 PLEXIGLASS & ACRYLIC CARE CLEANING Clean with plenty of nonabrasiv e soap (or detergent) and luk e warm water , using the bare hand to feel and dislodge any cak ed-on dir t. A soft, grit-free cloth, sponge or cham- ois ma y be used, but only as a means of carrying the water to the plastic. Dr y with a clean damp chamois or clean so[...]

IGUP-RED-0309 12 APPENDIX A. – Temperature Guidlines The refrigerators should be operated according to Hussmann’s published engineering specifications for entering air temperatures for specific equipment applications. Table 1 shows the typical temperature of the air entering the food zone one hour before the start of defrost and one hour after [...]

Rev.0 309 13 1°C (1.8°F). Temperature measuring devices that are scaled only in Fahrenheit shall be accurate to 2°F. The thermometer should be checked for proper calibration. (It should read 32°F when the stem is immersed in an ice water bath). b) LOCATION – The probe or sensing element of the thermometer should be located in the airstream wh[...]

IGUP-RED-0309 14[...]

Rev.0 309 15 LIMITED WARRANTY This warranty is made to the original user at the original installation site and is not transferable. Hussmann merchandisers ar e war ranted to be fr ee fr om def ect in material and w orkmanship under normal use and ser vice for a period of one (1) year fr om the date of original installation (not to exceed fifteen (1[...]

IGUP-RED-0309 16 The MODEL NAME and SERIAL NUMBER is required in or der to pr ovide you with the correct parts and information for y our particular unit. They can be found on a small metal plate on the unit. Please note them below for futur e refer ence. MODEL: SERIAL NUMBER: /Chino Additional copies of this publication may be obtained b y contacti[...]