Iiyama ProLite L6560S инструкция обслуживания

ENGLISH Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference. USER MANUAL[...]

ENGLISH[...]

ENGLISH  We reserve the right to change speci fi cations without notice.  All trademarks used in this user manual are the property of their respective owners. We recommend recycling of used product. Please contact your dealer or iiyama service center . Recycle information is obtained via the Internet, using the address: http://www .iiyama.co[...]

ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY .......................................................................... 1 SAFETY PRECAUTIONS .............................................................. 1 SPECIAL NOTES ON LCD MONITORS ....................................... 3 CUSTOMER SER VICE ........................................................[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CAB[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE  When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Due to the nature of[...]

ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. * 1 The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5 UNP ACKING Before unpacking your monitor , prepare a stable, level, and clean surface near a wall outlet. Set the LCD Monitor box in an upright position and open from the top of the box before removing the top cushions. Remove the white handle(s) and cut the banding. Remove the top cushion and take the acce[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECTORS : MONITOR <Side Controller> Power Button SOURCE Input Select Button Right Button Left Button Up Button Down Button MENU / EXIT Menu/Exit Button <Front> Power Indicator Green Normal Operation Orange Power Management If power off and select LED on via menu "Front LED O[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7 <Right Side > * Available for ProLite T6560MTS only . Cal.* Calibration Button T ouch USB* T ouch USB Connector Touch USB Cal.[...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR <Right Side & Back> L R Composite Audio Video S-Video L R Component Audio Component Video SPDIF Out PC Audio In VGA HDMI2 HDMI1 RS232C RS485 In RS485 Out OFF ON AC IN AC OUT 100-200V2A[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 9 RS232C In D-SUB 9pin RS232C Connector RS485 In RJ-45 RS485 input Connector RS485 Out RJ-45 RS485 output Connector HDMI1 HDMI HDMI Connector , HDMI Anschluss HDMI2 HDMI HDMI Connector , HDMI Anschluss VGA D-SUB mini 15pin D-SUB mini 15pin Connector PC Audio In Mini Jack Audio Connector SPDIF Out SPDIF SPDIF [...]

ENGLISH 10 BEFORE YOU OPERA TE THE MONITOR INST ALLA TION CAUTION  Follow the manual instructions for the type of mount you have selected. Refer all servicing to quali fi ed service personnel.  Moving the monitor requires at least two people.  Before installing, please make sure the wall is strong enough to hold the necessary weight of th[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 1 1 CONTROLS AND CONNECTORS : REMOTE CONTROL T urns the monitor ON and OFF . VGA / DVI / HDMI1 / COMP1 / A V1(VIDEO1) / HDMI2 Selects the source. DVI: Not available on this model. ECO+ Brightness of back-light is reduced. ECO- Brightness of back-light is increased. P-SOURCE Selects the secondary sub source. M[...]

ENGLISH 12 BEFORE YOU OPERA TE THE MONITOR T o use the remote control, insert the two dry batteries. PREP ARING THE REMOTE CONTROL CAUTION Do not use any other batteries other than those speci fi ed in this manual for the Remote Control. Do not insert old and new batteries together in the Remote Control. Make sure that the terminals match the &quo[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 13 BASIC OPERA TION  T urning the monitor ON The monitor is turned On and the Power Indicator turns to Green when you press the Power Button on the monitor or the Remote Control. The monitor is turned Of f and the Power Indicator turns to orange when you press the Power Button on the monitor or the Remote [...]

ENGLISH 14 BEFORE YOU OPERA TE THE MONITOR  Move the cursor horizontally Select menu or setting, or perform the adjustment by pressing the / Button while the menu page is displayed on the screen. [Monitor] [Remote Control]  Move the cursor vertically Select adjustment by pressing the / Button while the menu page is displayed on the screen. [M[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 15  Adjust the volume of sound Press the V olume+ / Volume- Button on the Remote Control to adjust the volume of sound when the menu page is not displayed on the screen. [Remote Control]  Switch the input signal This is activated when you successively press the Source Button on the monitor or Input Sign[...]

ENGLISH 16 BEFORE YOU OPERA TE THE MONITOR CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. * Connect the Power Cable to the monitor fi rst and then to the power supply . Turn on your monitor (Ma[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 17 [ Connection example with the peripheral device ] CAUTION T urn off the power switch and unplug the monitor and peripherals before connection to avoid electric shock or damage. NOTE  Refer to the user manual of peripherals at the same time.  Ensure you have the necessary cables as required. L R Compo[...]

ENGLISH 18 BEFORE YOU OPERA TE THE MONITOR  Procedure for turning ON the Power Switch T urn ON the monitor fi rst, and then the computer .  MUL TI-TOUCH DRIVER : ProLite T6560MTS Please download "NW2150 (multi-touch driver)" from web site of Next Window , and install to your PC. http://www .nextwindow .com/nextwindow_support/win[...]

ENGLISH OPERA TING THE MONITOR 19 OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 41. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 32 for SCREEN ADJUSTMENTS.  Press [...]

ENGLISH 20 OPERA TING THE MONITOR  OSD LOCK MODE: LOCK: Press ENTER, ENTER, EXIT , EXIT , ENTER and EXIT on the Remote Control in sequence and OSD will be locked. UNLOCK: Press ENTER, ENTER, EXIT , EXIT , ENTER and EXIT on the Remote Control in sequence and OSD will be Unlocked.[...]

ENGLISH OPERA TING THE MONITOR 21 ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. * 2 Only COMP1, A V1 and s-v input. Y ou can skip the Menu items a[...]

ENGLISH 22 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press T o gain Red Red Gain Green Gain T o gain Green Gamma Colour Temerature Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset 2.2 256 256 256 0 Image Settings 0 0 User Colour T emperature User 5000K 6500K 7500K 9300K Go to adjustment menu of Gain and Offs[...]

ENGLISH OPERA TING THE MONITOR 23 Adjustment Item Problem / Option Button to Press Zoom in the image Zoom out the image Zoom Auto Scan Aspect Ratio Aspect Ratio Zoom Auto Scan Side By Side Scale PIP Position Main Full Screen Display Settings Select Source PIP Mode PIP Auto Scan Select Source Off Off Full Screen Top-Left Aspect Ratio Full Screen Pil[...]

ENGLISH 24 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Bottom-Right / T op-Left / T op-Right / Bottom-Left PIP Position Aspect Ratio Aspect Ratio Aspect Ratio Zoom Auto Scan Side By Side Scale PIP Position Main Full Screen Display Settings Select Source PIP Mode PIP Auto Scan Select Source Off Off Full Screen Top-Left PI[...]

ENGLISH OPERA TING THE MONITOR 25 * 1 PIP = Picture in Picture With this function, you can display two different picture. Main Screen Sub Screen Small Middle Large Main Screen Sub Screen Side by Side PIP Screen T able Main Sub HDMI1 HDMI2 VGA Component S-Video Video HDMI1 HDMI2 VGA Component S-Video Video[...]

ENGLISH 26 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press HDMI Audio Input Volume Bass Tre b le Balance 50 10 10 Audio Settings 10 HDMI Audio Settings T oo soft T oo loud V olume Bass T oo weak T oo strong T reble T oo weak T oo strong Balance Adjust the volume balance of the speaker right and left. HDMI Audio Input * HDMI [...]

ENGLISH OPERA TING THE MONITOR 27 Adjustment Item Problem / Option Button to Press T oo opaque T oo transparent OSD T ransparent Start Up Logo OSD Location OSD Zoom OSD Rotation Real Time Clock OSD Transparent Landscape Basic Settings OSD Language Sleep Timer OSD Timeout 0 Off English 120Sec. Off On OSD Rotation On Off Landscape Portrait Zoom in th[...]

ENGLISH 28 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Auto Adjustment * 1,2,4 Monitor ID Image Position Phase Clock Light Sensor Baud Rate Auto Adjustment On Advanced Setting Flesh Tone IRFM Power LED Factory Reset VGA ADC Settings Off 115200 Off No 46 50 1 Off No Flesh T one * 3 No Ye s Off Low Return to Menu. Adjust P[...]

ENGLISH OPERA TING THE MONITOR 29 Adjustment Item Problem / Option Button to Press Factory Reset Monitor ID Image Position Phase Clock Light Sensor Baud Rate Auto Adjustment On Advanced Setting Flesh Tone IRFM Power LED Factory Reset VGA ADC Settings Off 115200 Off No 46 50 1 Off No No Ye s Return to Menu. Factory-preset data is restored. Advanced [...]

ENGLISH 30 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press ADC Mode ADC Mode User ADC Calibration Advanced Setting Restore ADC to Default Default Default User Factory Mode User Setting Mode Advanced Settings VGA ADC Settings User ADC Calibration* 5 Press Button. Restore ADC to Default Press Button. No Ye s Return to Menu. Se[...]

ENGLISH OPERA TING THE MONITOR 31 Adjustment Item Problem / Option Button to Press Firmware Version Source Main Channel Information 1920x1080@60.0Hz System Status Resolution V0.20d VGA System Status System Status Displays information regarding the current input signal coming from the graphic card in your computer . See your graphic card user guide [...]

ENGLISH 32 OPERA TING THE MONITOR SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 192 0 × 1080, but can not provide the best at resolutions of less[...]

ENGLISH OPERA TING THE MONITOR 33 F 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).  Another way to make the Clock adjustment is to[...]

ENGLISH 34 OPERA TING THE MONITOR  In case the strong fl icker or blurs remain on a part of the screen, repeat steps F and G because the Clocks may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.  Adjust the H-Position after the Phase adjustment[...]

ENGLISH OPERA TING THE MONITOR 35  Even when using the power management mode, the monitor consumes electricity . Turn of f the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.  It is possible that the video signal from the computer may be on while the H or V sync sig[...]

ENGLISH 36 TROUBLE SHOOTING The screen is not synchronized.  The Signal Cable is properly connected.  The signal timing of the computer is within the speci fi cation of the monitor .  The video output level of the c omputer is within th e speci fi ca tion of the monitor . The picture does not appear .  The Power Cable is ?[...]

ENGLISH Recycling information 37 For better environment protection please don't dispose your monitor . Please visit our web site: www .iiyama.com/recycle for monitor recycling. RECYCLING INFORMA TION[...]

ENGLISH 38 APPENDIX APPENDIX SPECIFICA TIONS : ProLite T6560MTS LCD Panel Driving system a-Si TFT Active Matrix 0.744mm H × 0.744mm V Response time Pixel pitch 8ms (Gray to Gray T ypical) Display Colors Approx.1.073G Sync Frequency Analog: Horizontal: 23.0-92.0kHz, V ertical: 56-85Hz Digital: Horizontal: 23.0-92.0kHz, V ertical: 50-85Hz Maximum Re[...]

ENGLISH APPENDIX 39 SPECIFICA TIONS : ProLite L6560S * Audio equipment are not connected. NOTE LCD Panel Driving system a-Si TFT Active Matrix 0.744mm H × 0.744mm V Response time Pixel pitch 8ms (Gray to Gray T ypical) Display Colors Approx.1.073G Sync Frequency Analog: Horizontal: 23.0-92.0kHz, V ertical: 56-85Hz Digital: Horizontal: 23.0-92.0kHz[...]

ENGLISH 40 APPENDIX DIMENSIONS 942.5mm/37.1” 1567.5mm/61.7” 803.5mm/31.6” 1428.5mm/56.2” 1529.0mm/60.2” 1 162.5mm/45.8” B A 905.5mm/35.6” ProLite L6560S ProLite T6560MTS AB 104.0mm/4.1” 171.0mm/6.7” 88.5mm/3.5” 155.5mm/6.1” MODEL[...]

ENGLISH APPENDIX 41 M081A21 COMPLIANT TIMING * 1 means supported timing. * 2 480i means supported 480i@60Hz(YPbPr). * 3 576i means supported 576i@60Hz(YPbPr). T iming VESA VGA 640x480 31.469 59.940 25.175 37.861 72.809 31.500 37.500 75.000 31.500 43.269 85.008 36.000 SVGA 800x600 35.156 56.250 36.000 37.879 60.317 40.000 48.077 72.188 50.000 46.875[...]