Iiyama ProLite T4260MTS инструкция обслуживания

ENGLISH Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference. USER MANUAL[...]

ENGLISH[...]

ENGLISH  We reserve the right to change speci fi cations without notice.  All trademarks used in this user manual are the property of their respective owners. We recommend recycling of used product. Please contact your dealer or iiyama service center . Recycle information is obtained via the Internet, using the address: http://www .iiyama.co[...]

ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY .......................................................................... 1 SAFETY PRECAUTIONS .............................................................. 1 SPECIAL NOTES ON LCD MONITORS ....................................... 3 CUSTOMER SER VICE ........................................................[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CAB[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE  When you fi rst turn on the LCD monitor, the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.  Due to the nature of [...]

ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. * 1 The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5 UNP ACKING Before unpacking your monitor , prepare a stable, level, and clean surface near a wall outlet. Set the LCD Monitor box in an upright position and open from the top of the box before removing the top cushions. Remove the white handle(s) and cut the banding. Remove the top cushion and take the acce[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECTORS : MONITOR <Side Controller> Power Button SOURCE Input Select Button Right Button Left Button Up Button Down Button MENU / EXIT Menu/Exit Button <Front> Power Indicator Green Normal Operation Orange Power Management If power off and select LED on via menu "Front LED O[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7 <Left Side> AC OUT AC Connector (AC-OUT) AC IN AC Connector (ON) / (OFF) Main Power Switch OFF ON MAIN POWER AC IN AC OUT 100-200V2A <Right Side > Touch USB T ouch USB* T ouch USB Connector * Available for ProLite T4260MTS only .[...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR <Back> HDMI1 HDMI HDMI Connector HDMI2 HDMI HDMI Connector DVI DVI-D 24pin DVI-D 24pin Connector VGA D-SUB mini 15pin D-SUB mini 15pin Connector PC Audio In Mini Jack Audio Connector IR Extender Mini Jack IR Extender Connector SPDIF Out SPDIF SPDIF output Connector Component Video RCA G(Y)/B(Pb)/R(Pr)[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 9 INST ALLA TION CAUTION  Follow the manual instructions for the type of mount you have selected. Refer all servicing to quali fi ed service personnel.  Moving the monitor requires at least two people.  Before installing, please make sure the wall is strong enough to hold the necessary weight of the[...]

ENGLISH 10 BEFORE YOU OPERA TE THE MONITOR CONTROLS AND CONNECTORS : REMOTE CONTROL T urns the monitor ON and OFF . VGA / DVI / HDMI1 / COMP1 / A V1(VIDEO1) / HDMI2 Selects the source. ECO+ Brightness of back-light is reduced. ECO- Brightness of back-light is increased. P-SOURCE Selects the secondary sub source. MENU Opens the monitor's on-scr[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 1 1 T o use the remote control, insert the two dry batteries. PREP ARING THE REMOTE CONTROL CAUTION Do not use any other batteries other than those speci fi ed in this manual for the Remote Control. Do not insert old and new batteries together in the Remote Control. Make sure that the terminals match the &qu[...]

ENGLISH 12 BEFORE YOU OPERA TE THE MONITOR BASIC OPERA TION  T urning the monitor ON The monitor is turned On and the Power Indicator turns to Green when you press the Power Button on the monitor or the Remote Control. The monitor is turned Of f and the Power Indicator turns to orange when you press the Power Button on the monitor or the Remote [...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 13  Move the cursor horizontally Select menu or setting, or perform the adjustment by pressing the / Button while the menu page is displayed on the screen. [Monitor] [Remote Control]  Move the cursor vertically Select adjustment by pressing the / Button while the menu page is displayed on the screen. [M[...]

ENGLISH 14 BEFORE YOU OPERA TE THE MONITOR  Adjust the volume of sound Press the V olume+ / Volume- Button on the Remote Control to adjust the volume of sound when the menu page is not displayed on the screen. [Remote Control]  Switch the input signal This is activated when you successively press the Source Button on the monitor or Input Sign[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 15 CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. * Connect the Power Cable to the monitor fi rst and then to the power supply . Turn on your monitor (Ma[...]

ENGLISH 16 BEFORE YOU OPERA TE THE MONITOR [ Connection example with the peripheral device ] CAUTION T urn off the power switch and unplug the monitor and peripherals before connection to avoid electric shock or damage. NOTE  Refer to the user manual of peripherals at the same time.  Ensure you have the necessary cables as required. L R Compo[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 17  Procedure for turning ON the Power Switch T urn ON the monitor fi rst, and then the computer .  MUL TI-TOUCH DRIVER : ProLite T4260MTS Please download "NW2500 (multi-touch driver)" from web site of Next Window , and install to your PC. http://www .nextwindow .com/nextwindow_support/win[...]

ENGLISH 18 OPERA TING THE MONITOR OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 40. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 31 for SCREEN ADJUSTMENTS.  Press [...]

ENGLISH OPERA TING THE MONITOR 19  OSD LOCK MODE: LOCK: Press ENTER, ENTER, EXIT , EXIT , ENTER and EXIT on the Remote Control in sequence and OSD will be locked. UNLOCK: Press ENTER, ENTER, EXIT , EXIT , ENTER and EXIT on the Remote Control in sequence and OSD will be Unlocked.[...]

ENGLISH 20 OPERA TING THE MONITOR ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press T oo dark T oo bright Brightness * 1 Contrast T oo dull T oo intense * 1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. * 2 Only COMP1, A V1 and s-v input. Y ou can skip the Menu items a[...]

ENGLISH OPERA TING THE MONITOR 21 Adjustment Item Problem / Option Button to Press T o gain Red Red Gain Green Gain T o gain Green Gamma Colour Temerature Red Gain Green Gain Blue Gain Red Offset Green Offset Blue Offset 2.2 256 256 256 0 Image Settings 0 0 User Colour T emperature User 5000K 6500K 7500K 9300K Go to adjustment menu of Gain and Offs[...]

ENGLISH 22 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Zoom in the image Zoom out the image Zoom Auto Scan Aspect Ratio Aspect Ratio Zoom Auto Scan Side By Side Scale PIP Position Main Full Screen Display Settings Select Source PIP Mode PIP Auto Scan Select Source Off Off Full Screen Top-Left Aspect Ratio Full Screen Pil[...]

ENGLISH OPERA TING THE MONITOR 23 Adjustment Item Problem / Option Button to Press Bottom-Right / T op-Left / T op-Right / Bottom-Left PIP Position Aspect Ratio Aspect Ratio Aspect Ratio Zoom Auto Scan Side By Side Scale PIP Position Main Full Screen Display Settings Select Source PIP Mode PIP Auto Scan Select Source Off Off Full Screen Top-Left PI[...]

ENGLISH 24 OPERA TING THE MONITOR * 1 PIP = Picture in Picture With this function, you can display two different picture. Main Screen Sub Screen Small Middle Large Main Screen Sub Screen Side by Side PIP Screen T able Main Sub HDMI1 HDMI2 VGA DVI Component S-Video Video HDMI1 HDMI2 VGA DVI Component S-Video Video[...]

ENGLISH OPERA TING THE MONITOR 25 Adjustment Item Problem / Option Button to Press HDMI Audio Input Volume Bass Tre b le Balance 50 10 10 Audio Settings 10 HDMI Audio Settings T oo soft T oo loud V olume Bass T oo weak T oo strong T reble T oo weak T oo strong Balance Adjust the volume balance of the speaker right and left. HDMI Audio Input * HDMI [...]

ENGLISH 26 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press T oo opaque T oo transparent OSD T ransparent Start Up Logo OSD Location OSD Zoom OSD Rotation Real Time Clock OSD Transparent Landscape Basic Settings OSD Language Sleep Timer OSD Timeout 0 Off English 120Sec. Off On OSD Rotation On Off Landscape Portrait Zoom in th[...]

ENGLISH OPERA TING THE MONITOR 27 Adjustment Item Problem / Option Button to Press Auto Adjustment * 1,2,4 Monitor ID Image Position Phase Clock Light Sensor Baud Rate Auto Adjustment On Advanced Setting Flesh Tone IRFM Power LED Factory Reset VGA ADC Settings Off 115200 Off No 46 50 1 Off No Flesh T one * 3 No Ye s Off Low Return to Menu. Adjust P[...]

ENGLISH 28 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Factory Reset Monitor ID Image Position Phase Clock Light Sensor Baud Rate Auto Adjustment On Advanced Setting Flesh Tone IRFM Power LED Factory Reset VGA ADC Settings Off 115200 Off No 46 50 1 Off No No Ye s Return to Menu. Factory-preset data is restored. Advanced [...]

ENGLISH OPERA TING THE MONITOR 29 Adjustment Item Problem / Option Button to Press ADC Mode ADC Mode User ADC Calibration Advanced Setting Restore ADC to Default Default Default User Factory Mode User Setting Mode Advanced Settings VGA ADC Settings User ADC Calibration* 5 Press Button. Restore ADC to Default Press Button. No Ye s Return to Menu. Se[...]

ENGLISH 30 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Firmware Version Source Main Channel Information 1920x1080@60.0Hz System Status Resolution V0.20d VGA System Status System Status Displays information regarding the current input signal coming from the graphic card in your computer . See your graphic card user guide [...]

ENGLISH OPERA TING THE MONITOR 31 SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 192 0 × 1080, but can not provide the best at resolutions of less[...]

ENGLISH 32 OPERA TING THE MONITOR F 1) Adjust the H-Position so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2).  Another way to make the Clock adjustment is to[...]

ENGLISH OPERA TING THE MONITOR 33  In case the strong fl icker or blurs remain on a part of the screen, repeat steps F and G because the Clocks may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.  Adjust the H-Position after the Phase adjustment[...]

ENGLISH 34 OPERA TING THE MONITOR  Even when using the power management mode, the monitor consumes electricity . Turn of f the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.  It is possible that the video signal from the computer may be on while the H or V sync sig[...]

ENGLISH TROUBLE SHOOTING 35 The screen is not synchronized.  The Signal Cable is properly connected.  The signal timing of the computer is within the speci fi cation of the monitor .  The video output level of the c omputer is within th e speci fi cation of the monitor . The picture does not appear .  The Power Cable is ?[...]

ENGLISH 36 Recycling information For better environment protection please don't dispose your monitor . Please visit our web site: www .iiyama.com/recycle for monitor recycling. RECYCLING INFORMA TION[...]

ENGLISH APPENDIX 37 APPENDIX SPECIFICA TIONS : ProLite T4260MTS LCD Panel Driving system a-Si TFT Active Matrix 0.1615mm H × 0.4845mm V Response time Pixel pitch 6.5ms (Gray to Gray T ypical) Display Colors Approx.16.7M Sync Frequency Analog: Horizontal: 23.0-92.0kHz, V ertical: 56-85Hz Digital: Horizontal: 23.0-92.0kHz, V ertical: 50-85Hz Maximum[...]

ENGLISH 38 APPENDIX SPECIFICA TIONS : ProLite L4260S LCD Panel Driving system a-Si TFT Active Matrix 0.1615mm H × 0.4845mm V Response time Pixel pitch 6.5ms (Gray to Gray T ypical) Display Colors Approx.16.7M Sync Frequency Analog: Horizontal: 23.0-92.0kHz, V ertical: 56-85Hz Digital: Horizontal: 23.0-92.0kHz, V ertical: 50-85Hz Maximum Resolution[...]

ENGLISH APPENDIX 39 DIMENSIONS 615.0mm/24.2” 527.0mm/20.7” 934.0mm/36.8” 1022.0mm/40.2” 992.5mm/39.1” A B 456.5mm/18.0” 586.0mm/23.1” ProLite T4260MTS ProLite L4260S A B 61.0mm/2.4” 124.5mm/4.9” 72.0mm/2.8” 135.5mm/5.3”[...]

ENGLISH 40 APPENDIX M079A21 COMPLIANT TIMING T iming VESA VGA 640x480 31.469 59.940 25.175 37.861 72.809 31.500 37.500 75.000 31.500 43.269 85.008 36.000 SVGA 800x600 35.156 56.250 36.000 37.879 60.317 40.000 48.077 72.188 50.000 46.875 75.000 49.500 53.674 85.060 56.250 XGA 1024x768 48.363 60.004 65.000 56.476 70.069 75.000 60.023 75.029 78.750 68[...]