Impex Marcy MWM-8150 инструкция обслуживания

NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Resistance Chart Warranty Ordering Parts Model MWM-8150 Retain This Manual for Reference 08-04-08 OWNER'S MANUAL MARCY HOME GYM MWM-8150 IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDU[...]

TA BLE OF CONTENTS BEFORE YOU BEGIN....................................................................................……….. 1 IMPORTANT SAFET Y NOTICE...................................................................……….. 2 HARDW ARE PACK……….....….....................................................................……….. [...]

IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine. In particul ar, note the follow ing safety precautions: 1. Keep children and pets away [...]

WA RNI NG LABEL REPLA CEMENT The w arnin g labels show n here h ave been p laced on t he Rear Base and Upp er Frame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacements. Apply the labels in the location shown. 3[...]

HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 4[...]

HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 5[...]

HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 6[...]

HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 7[...]

A SSEMBLY INSTRUCTION Tools Required for A ssembling the Machine: Tw o Adj ustable Wrenches, two Allen Wrenches, and one Philips Screw driver. NOTE: It is strongly recommended that this machine to be assembled by tw o or more people to avoid possible injury . STEP 1 (See Diagram 1) A.) Insert the tw o Guide Rods (#7) into the holes on the Rear Base[...]

DIAGRAM 1 9[...]

STEP 2 (See Diagram 2) A.) Sl ide 14 W eight Plates (#33) onto the Gui de Rods. Make sure the deep g roove on the W eig ht Plates all facing the front of the machine and downw ard. Insert the Selector Rod ( #28) throug h the center hole on the W eight Plates. Slide the Selector Stem (#32) onto the Guide Rods. Use the L- shaped Pin (#39) to select t[...]

DIAGRAM 2 11[...]

STEP 3 (See Diagram 3) A.) Attach the Seat Suppor t (#8) to the Ver tical Frame ( #4). Secure it w ith two M10 x 2 ½” Carri age Bolts ( #65), one 4 ¾” x 2” Bracket (#23), tw o Ø ¾” W ashers (#80), and tw o M10 Aircraft Nuts (#82) . Do not tighten the Nuts and Bolts y e t. B.) Attach the tw o Seat Support Frames (#10) to the Seat Support[...]

STEP 4 (See Diagram 4) A.) Attach tw o Ø 1” Bushing s (#44) to the holes on the U pper Frame ( #5). Attach the Front Press Base (#11) to the tw o Bushings. Secure it w ith one M12 x 4 1/8” All en Bolt (#68), tw o Ø 1” W ashers (#81), and one M12 Airc raft Nuts (#63). Do not ov er tighten the Nut and Bolt. Make sure t he Front Press Base is [...]

CABLE LOOP DIAGRAM 14[...]

STEP 5 (See Diagram 5 & Cable Loop Diagram) A. ) Attach the 153” Upper C able (#34) to the openi ng at the front of the Upper Frame (#5). Note: The Ball Stopper on the cable should be underneath the Frame. B.) Attach a Pulley (#47) to the opening. Secure i t wi th one M10 x 2 ½ ” Allen Bolt (#74), tw o Ø 7/8” x 5/8” Pulley Bushings (#[...]

DIAGRAM 5 16[...]

STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach one end of the 125” Butter fly Cabl e (#35) to the hook on the Ri ght Butterfly (#13). B.) D raw the Cable to the ri ght Sw iv el Pulley Bracket (#16). C.) Attach a Pulley to the bracket. Secure it w ith one M10 x 1 ¾” Allen Bolt ( #72), tw o Ø ¾” W ashers ( #80), and one M10 Air c[...]

DIAGRAM 6 18[...]

STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach the 131” Low er Cable ( #36) to the opening on the bottom of the Leg Devel oper (#9). B.) Attach a Pulley to the opening. Secur e it wi th one M10 x 2 ½” All en Bolt (#74) , two Ø 7/8” x 5/8” Pulley Bushings (#43), and one M10 Ai rcraft Nut (#82) . C.) Draw the C able underneath t[...]

DIAGRAM 7 20[...]

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Base Fram e 1 2 Rear Base Fram e 1 3 Vertical Support F ram e 1 4 Vertical Fram e 1 5 Upper Frame 1 6 Top Soc ket As sem bly 1 7 Guide Rod 2 8 Seat Support 1 9 Leg Developer 1 10 Seat Support Fram e 2 11 Front Pres s Base 1 12 Left Butterf ly 1 13 Right Butterfly 1 14 Front Pres s Handle 2 15 Butterfly P[...]

22[...]

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warr ants this produc t to be fr ee from def ects in work m anship and mater ial, under norm al use and ser vice conditions, f or a period of two y ears on the Fram e from the date of purc hase. This warranty extends only to the original purchaser . IMPEX's obligation under this[...]