Impex NS-1101U инструкция обслуживания

NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Warranty Ordering Parts Model NS-1101U Retain This Manual for Reference 120315 ASSEMBLY & OWNER'S MANUAL Magnetic-Resistance Upright Bike NS-1101U IMPEX ® INC. 2801 S. Towne Ave, Pomona, CA 9[...]

TABLE OF CONTENTS BEFORE YO U BEGIN ...................................................................................…. 1 IMPORTANT SAF ETY NOTIC ES..................................................................…. 2 WARNING LABEL PLACEMENT……………………………………………………. 3 HARDWARE PACK……….....… .......[...]

© IMPEX INC. www.impex-fitness.com 2 IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equi pment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. K[...]

WARNING LABEL PLACEMENT The Warning Labels and Caution Label shown here have been placed on the Rear Stabilizer. If the labels are missing or illegible, please call cust omer service at 1-800-999-8899 for replacement. Apply the labels in location shown. © IMPEX INC. www.impex-fitness.com 3[...]

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. NO. DESCRIPTION IDENTIFIER Q’TY 7 Spacer 1 20 M8 x 3” Allen Bolt 4 16 Ø ¾” Curved Washer 4 21 Ø ½” Lock Washer 4 5 M5 x 1” Philips Screw 1 8 T-shaped Lock knob 1 Allen wrench 1 Crossing wrench 1 © IMPEX INC. www.impex-fitnes[...]

COMPONENTS FOR ASSEMBLY © IMPEX INC. www.impex-fitness.com 5[...]

ASSEMBLY INSTRUCTION  Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer.  NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP-1 A.) Attach the Front Stabilizer (#19) to the Main Fram e (#26). Secure it with two M8 x 3” Allen Bol[...]

STEP 2 A.) Thread the Left Pedal (#27) count erclockwise into the Crank (#28). B.) Thread the Right Pedal (#25) clockwise into the Crank (#28). © IMPEX INC. www.impex-fitness.com 7[...]

STEP 3 A.) NOTE: Extra help may be needed to hold the Front Post (#4) while connecting the cables and wires. B.) Remove the four M8 x ¾” Allen Bolts (#15) and four Ø ¾” Curved Washers (#16) pre-installed by factory from Front Post (#9). Slide the Fr ont Cover (#18) onto the Front Post (#9). C.) Attach the Front Post (#9) to the Main Fram e ([...]

STEP 4 A.) Attach the Handle (#2) to the Front Post (#9). B.) Insert the two Pulse Sensor Wires (#3) thr ough the open slot on Front Post and then pull up and out of the Front Post. C.) Clamp the Handle to the Front Post. Secure it with T-shaped Lock Knob (#8), Spacer (#7), and the Clamp Cover (#6). © IMPEX INC. www.impex-fitness.com 9[...]

STEP 5 A.) Connect the Middle Computer Wire (#4) to the computer wire. B.) Connect the two Pulse Sensor Wires (#3) to the sensor wire from Computer (#1). C.) Slide the Computer onto the Fr ont Post (#9). Secure it with one M5 x 1” Philips Screw (#5). © IMPEX INC. www.impex-fitness.com 10[...]

STEP 6 A.) Insert the Seat Post (#14) into the Main Frame (#26). Use the Quick Release Knob (#24) to securely lock the Seat in position. B.) Remove M5 x 5/8” Philips Scre w (#10) pre-installed by factory from Front Post (#9). Attach the Water Bottle Rack (#11) to Front Post (#9) . Secure it with two the M5 x 5/8” Philips Screws (#10) previously[...]

STEP 7 A.) Attach the Seat (#13) onto the Seat Post (#14). Secure the Seat with pre-installed round bracket, bolt, and nuts underneath the Seat. B.) Place the Water Bottle (#12) into the Water Bottle Rack (#11). © IMPEX INC. www.impex-fitness.com 12[...]

EXPLODED DIAGRAM © IMPEX INC. www.impex-fitness.com 13[...]

© IMPEX INC. www.impex-fitness.com 14 PARTS LIST PART NO. DESCRIPTION SPEC. QUANTITY 1 Computer 1 2 Handle 1 3 Pulse Sensor Wire 2 4 Middle Computer Wire 1 5 Philips Screw M5 x 1” 1 6 Clamp Cover 1 7 Spacer 1 8 T-shaped Lock Knob 1 9 Front Post 1 10 Philips Screw M5 x 5/8” 2 11 Water Bottle Rack 1 12 Water Bottle 1 13 Seat w/Towel Bracket 1 14[...]

© IMPEX INC. www.impex-fitness.com 15 CARE, MAINTENANCE AND STORAGE 1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately. 2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. 3. Store the bike IN-DOOR. Excess moisture and water would cause rust on the fram[...]

COMPUTER Set Up Time and Date 1. To set up time and date; remove batteries for few seconds, and then place batteries back. The computer will beep and display “8888” and then display Time/Date field. 2. Press “MODE” key to enter the Time or Date field. 3. Press “SET” key to set time/Date data . 4. After Time and Date has been set up, pre[...]

EXERCISE GUIDELINES Using your MAGNETIC BIKE will provide you with several benefits, it will improve your physical fitness, tone muscle and in conjunction with calo rie controlled diet help you lose weight. 1. The Warm Up Phase This stage helps get the blood flowing around t he body and the muscles working properly. It will also reduce the risk of [...]

© IMPEX INC. www.impex-fitness.com 18 3. The Cool Down Phase This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm up exercise e.g. reduce your tempo, cont inue for approximately 5 minutes. The stretching exercises should now be repeated, again remembering not to force or jerk your muscles into the st[...]

© IMPEX INC. www.impex-fitness.com 19 IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX&apo[...]