Intel ADE-9040 инструкция обслуживания

P/N: 600C002904010 ADE-9040 Intel ® Core™ 2 Duo Desktop Q965 A TX Mother Board User ’ s Manual Rev . 1.0 2007/03/27[...]

ADE-9040 User ’ s Manual 2 / 55 Copyright All rights reserved. The information contained in this guide has been validated and reviewed for accuracy. No patent liability is assumed with respect to the use of the information contained herein. While every prec aution has been taken in the preparation of this guide, the Manufacturer assumes no re spo[...]

ADE-9040 User ’ s Manual 3 / 55 How to Use This Manual This manual is written for the system integr ator , PC technician and knowledgeable PC end user . It describes how to configure your AD E-9040 to meet various operating requirements. The user ’ s manual is divided into four chapters, with each chapt er addressing a basic concept and operati[...]

ADE-9040 User ’ s Manual 4 / 55 T able of Content 1. Introducti on ................................................................................................................. 8 1.1 Descripti on ........................................................................................................... 8 1.2 Packing Check List ...............[...]

ADE-9040 User ’ s Manual 5 / 55 3. System Inst allation ................................................................................................... 22 3.1 Intel ® µFC-LGA775 Processo r ........................................................................... 22 3.1.1 Installing Intel ® Core™ 2 Duo / Pentium ® 4 / Celeron ® D CPU [...]

ADE-9040 User ’ s Manual 6 / 55 Revision History Revision Date Comment Rev .1.0 Mar . 2007 Initial released[...]

ADE-9040 User ’ s Manual 7 / 55 CHAPTER 1[...]

ADE-9040 User ’ s Manual 8 / 55 1. Introduction 1.1 Description T aking advantages of Intel energy-ef f icient dual-core processing, ADE-9040 A TX Mother Board adopts Intel ® Core TM 2 Duo Desktop processors up to 1066 MHz FSB and Intel ® Q965 Express chipset with Intel ® ICH8R RAID function to fit th e high performance computer system applica[...]

ADE-9040 User ’ s Manual 9 / 55 1.2 Packing Check List The ADE-9040 package includes the following basic items accompany with this manual. ¾ One ADE-9040 A TX Mother Board ¾ One Quick Installation Guide for ADE-9040 ¾ One 40-pin IDE cable ¾ T wo Serial A T A cable ¾ One Serial port cable for COM2 or COM3 ¾ One Serial port cable for COM4 ¾ [...]

ADE-9040 User ’ s Manual 10 / 55 1.3 Specifications System CPU Intel ® Core™ 2 Duo Deskto p / Pentium ® D / Pentium ® 4 / Celeron ® D processor in the LGA775 packag e (E6000, 900, 800, 600, 500, 300 sequen ces) FSB 1066/800/533 MHz BIOS AMI BIOS with 8 Mb Flash EEPROM System Chipset Intel ® Q965 + ICH8R I/O Chip ITE IT8718F I/O controller [...]

ADE-9040 User ’ s Manual 1 1 / 55 Audio HDAC Realteck ALC883 7.1 + 2CH audio co dec Audio Interface Mic in, Line in, CD Audio in, Line out, Rear out and Ce nter/Subwoofer out Ethernet Chipset Dual Marvell® 88E8053 PCI Express™ Gigabit Ethernet cont rollers Ethernet Interface IEEE 802. 3 10BASE-T/100BASE-TX/1000BASE-T Mechanical & Environme[...]

ADE-9040 User ’ s Manual 12 / 55 1.4 System Architecture All of details operating relations are shown in ADE-9040 system block diagram.[...]

ADE-9040 User ’ s Manual 13 / 55 1.5 Dimensions Unit: mm[...]

ADE-9040 User ’ s Manual 14 / 55 CHAPTER 2[...]

ADE-9040 User ’ s Manual 15 / 55 2. Hardware Configuration Setting This chapter gives the definitions and s hows the positions of jumpers, headers and connectors. All of the confi guration jumpers on ADE-9040 are in the proper position. Th e default settings shipped from fact ory are marked with an asterisk (  ). In general, jumpers on the A T[...]

ADE-9040 User ’ s Manual 16 / 55 2.2 Jumpers & Connectors JUMPERS FUNCTION REMARK JP1 R TC CMOS clear select 1 x 3 header JP2 BIOS write protec t 1 x 3 header JP3 A T/A TX power select 1 x 2 header JP4 DVI select 2 x 12 header JP5 P A T A select 1 x 2 header JPB1 COM4 RS-232/422/485 se lect 2 x 7 header CONNECTORS FUNCTION REMARK CN1, CN2 USB[...]

ADE-9040 User ’ s Manual 17 / 55 2.3 Jumpers/Connectors Setting 2.3.1 RTC Clear CMOS (JP1) 2.3.2 BIOS Write Protect (JP2) PIN No. Description 1-2 Normal operation  2-3 Clear CMOS PIN No. Description 1-2 BIOS write disabled  2-3 BIOS write e nable d 2.3.3 A T/A TX Po wer Select (JP3) 2.3.4 DVI Select (JP4) PIN No. Description Open A TX Power[...]

ADE-9040 User ’ s Manual 18 / 55 2.3.12 Audio Connector (CN15) 2.3.13 PS/2 Keyboard & Mouse Connector (CN17) PIN No. Description PIN No. Description 1(Orange) Central out 4(Blue) Line-in 2(Black) Surround out 5(Green) Line-out 3(Gray) Side out 6(Red) Mic-in PIN No. Description PIN No. Description 1 Keyboard Data 7 Mouse Data 2 NC 8 NC 3 Groun[...]

ADE-9040 User ’ s Manual 19 / 55 2.3.19 4-pin A TX Pow er Connector (CN25) 2.3.20 24-pin A TX Pow er Connector (CN26) PIN No. Description 1 GND 2 GND 3 +12V 4 +12V Description PIN No. PIN No. Description +3.3V 13 1 +3.3V -12V 14 2 +3.3V Ground 15 3 Ground PS_ON 16 4 +5V Ground 17 5 Ground Ground 18 6 +5V Ground 19 7 Ground -5V 20 8 PW_OK +5V 21 9[...]

ADE-9040 User ’ s Manual 20 / 55 2.3.22 DVI Connector (CN31) Description PIN No. PIN No. Description HPDET 1 2 Ground Ground 3 4 DVIDA T A TDC0# 5 6 DVICLK TDC0 7 8 Ground Ground 9 10 TLC# TDC1# 1 1 12 TLC TDC1 13 14 Ground Ground 15 16 Ground TDC2# 17 18 Ground TDC2 19 20 +5V Signal Ty p e Description TDC0,TDC0# O DVI Dat a Channel 0 Output : Th[...]

ADE-9040 User ’ s Manual 21 / 55 CHAPTER 3[...]

ADE-9040 User ’ s Manual 22 / 55 3. System Installation This chapter provides you with instructions on how to setup your system. The additional information shows you how to install CPU/ F AN and memory . 3.1 Intel ® µFC-LGA775 Processor 3.1.1 Inst alling Intel ® Core™ 2 Duo / Pentium ® 4 / Celeron ® D CPU • The board comes with a surface[...]

ADE-9040 User ’ s Manual 23 / 55 3.1.2 Inst alling Intel µFC-LGA 775 CPU Fan, and Heat Sink • The Intel µFC-LGA 775 CPU heat sink and fan assembly comes in a push-pin design and requires no tool to install. • Place the fan with heat sink right above the CPU and make su re four pins matching the holes of the board. (8, 9) • Press all push-[...]

ADE-9040 User ’ s Manual 24 / 55 3.2 Main Memory ADE-9040 provides 2 DIMMs (240-pin Dual In-line Memory Module) to support 1.8V DDRAM (Synchronized DRAM) as on-board main memory . The maximum memory size is 256 MB ~ 4 GB with using 256 MB/512MB/1GB technology . Sup ports up to 2 double sided DIMMs at DDR2 533/667/800MHz. T he memory architecture [...]

ADE-9040 User ’ s Manual 25 / 55 3.3 Inst alling the A TX Mother Board T o install your ADE-9040 into standard cha ssis or propriet ary environment, you need to perform the following steps: 1. Check all jumpers se tting on proper position 2. Install and configure CPU and memory module on right position 3. Place ADE-9040 into the dedica t ed posit[...]

ADE-9040 User ’ s Manual 26 / 55 CHAPTER 4[...]

ADE-9040 User ’ s Manual 27 / 55 4. BIOS Setup 4.1 Entering Setup AMI BIOS has a built-in setup program that allows users to modify the basic system configuration. This information is stored in CMOS RAM whose power is supplied by a battery so that it can retain the setup info rmation even when the power is turned of f. Press Delete when you Power[...]

ADE-9040 User ’ s Manual 28 / 55 4.1.2 Advanced Setting[...]

ADE-9040 User ’ s Manual 29 / 55 4.1.2.1 CPU Configuration The CPU Configuration setup screen varies depending on the inst alled processor. 4.1.2.1.1 Max CP UID V alue Limit The Intel® Processor Identification Utility r equires the 'Max CPUID Value Limit' in the system BIOS to be disabled for proper proc essor identification. Once proc[...]

ADE-9040 User ’ s Manual 30 / 55 4.1.2.2 IDE Configuration 4.1.2.2.1 SA T A#1 Configuration Option: [Disabled], [Enhanced]. 4.1.2.2.2 Confi gure SA T A#1 as Option: [IDE], [RAID] 4.1.2.2.3 Primary/Sec ondary IDE Master/Slave Select one of the hard disk drives to configure it. Press <Enter > to access its the sub menu. The options on the sub[...]

ADE-9040 User ’ s Manual 31 / 55 4.1.2.2.6 A T A(PI) 80 Pin Cable Detection Set this option to select the method used to detect the ATA (PI) 80 pin cable. The Optimal and Fail-Safe setting is Host & Device. Item Description Host & Device Set this value to use both the motherboard onboar d IDE controll er and IDE disk drive to detect the t[...]

ADE-9040 User ’ s Manual 32 / 55 4.1.2.3 Super IO Configuration[...]

ADE-9040 User ’ s Manual 33 / 55 4.1.2.3.1 Serial Port1/2 Address This option specifies the base I/O port address and Interrupt Request address of serial port 1/2. The Optimal setting is 3F8/IRQ4. T he Fail-Safe default setting is Disabled. Item Description Disabled Set this value to prevent the serial port from accessing any sy stem resour ces. [...]

ADE-9040 User ’ s Manual 34 / 55 4.1.2.4 Hardware Health Configuration 4.1.2.4.1 H/W Health Function Enables Hardware Health Monitoring Device. 4.1.2.4.2 F AN 1 Mode Setting This item allows you to set fan speed control mode. Option: [Full On mode], [Automatic mode]. 4.1.2.4.3 T emperatur e 1 Limit of S tart Fan spins in a start PWM value when te[...]

ADE-9040 User ’ s Manual 35 / 55 4.1.2.4.8 Fan 2 St art PWM Fan start PWM value. Min=0, Max=127, Please input Dec number:. 4.1.2.4.9 Slope PWM 2 The PWM value is subject to the te mperature inputs by linear changing.[...]

ADE-9040 User ’ s Manual 36 / 55 4.1.2.5 ACPI Conf iguration 4.1.2.5.1 ACPI Aware O/S Set this value to allow the system to utiliz e the Intel ACPI (Advanced Configuration and Power Interface) specification. Item Description No This setting should be set if the operating system in u se does not comply with the ACPI (Advanced Configuration and Pow[...]

ADE-9040 User ’ s Manual 37 / 55 4.1.2.6 APM Configuration 4.1.2.6.1 Power Management/APM Set this value to allow Power Management/APM support. 4.1.2.6.2 Video Power Down Mode This option specifies the length of time t he system waits before it enters suspend mode. The options: Disabled, 1, 5, 10 Min. 4.1.2.6.3 Hard Disk Power Dow n Mode This opt[...]

ADE-9040 User ’ s Manual 38 / 55 4.1.2.6.7 Power Button Mode This option specifies how the externally mount ed power button on the front of the computer chassis is used. The options: On/Off, Standby, Suspend. 4.1.2.6.8 Resume On Ring Disable/Enable RI to generate a wake event. 4.1.2.6.9 Resume On LAN Disable/Enable LAN GPI to generate a wake even[...]

ADE-9040 User ’ s Manual 39 / 55 4.1.2.7 MPS Configuration Select MPS Revision.[...]

ADE-9040 User ’ s Manual 40 / 55 4.1.2.8 Remote Access Configuration 4.1.2.8.1 Remote Access You can disable or enable the B IOS remote access feature here. 4.1.2.8.2 Serial Port Number Select serial port for console redirection. Make sure the selected port is enabled. 4.1.2.8.3 Flow Control Select Flow Control for console redirection. 4.1.2.8.4 [...]

ADE-9040 User ’ s Manual 41 / 55 4.1.2.9 USB Co nfiguration 4.1.2.9.1 Legacy USB Support Legacy USB Support refers to the USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard will not become available until a USB compatible operati ng system is fully booted with a ll USB drivers loaded[...]

ADE-9040 User ’ s Manual 42 / 55 4.1.2.9.5 USB M ass Storage Device Configuration 4.1.2.9.5.1 Em ulation T ype If Auto, USB devices less than 530MB will be emulated as Floppy and remaining as hard drive. Forced FDD option can be used to forc e a HDD formatted drive to boot as FDD (Ex. ZIP drive)[...]

ADE-9040 User ’ s Manual 43 / 55 4.1.3 Advanced PCI/PnP Setting[...]

ADE-9040 User ’ s Manual 44 / 55 4.1.3.1 Clear NVRAM Clear NVRAM during System Boot. 4.1.3.2 Plug & Play O/S Set this value to allow the system to modify the settings for Plug and Play operating system support. Item Description No The No setting is for operat ing systems that do not meet the Plug and Play specifications. It allows the BIOS to[...]

ADE-9040 User ’ s Manual 45 / 55 4.1.3.9 DMA Channel 0/1/3/5/6/7 Set this value to allow the DMA setting to be modified. Item Description Available This setting allows the specified DM A to be use d by PCI/PnP device. Reserved This setting allows the specified DMA to be used by a legacy ISA device. 4.1.3.10 Reserved Memory Size Set this value to [...]

ADE-9040 User ’ s Manual 46 / 55 4.1.4 Boot Settings[...]

ADE-9040 User ’ s Manual 47 / 55 4.1.4.1 Boot Settings Configuration 4.1.4.1.1 Quick Boot The Optimal and Fail-Safe default setting is Disabled . Allow to set this value to allow the BIOS to skip certain POST tests to boot fast er or disabled to perform all POST tests. 4.1.4.1.2 Quiet Boot Set this value to allow the boot up screen options to be [...]

ADE-9040 User ’ s Manual 48 / 55 4.1.4.1.5 Wait For ‘F1’ If Error Set this value to allow the Wait fo r ‘F1’ Error setting to be modified. Item Description Disabled This prevents the to wait on an error for user intervention. This setting sh ould b e used if there is a known reason for a BIOS error to appear. An example would be a system [...]

ADE-9040 User ’ s Manual 49 / 55 4.1.5 Security Settings 4.1.5.1 Change Supervisor Password Indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Installed displays. 4.1.5.2 Change User Password Indicates whether a user password has been set. If the password has been installed, I[...]

ADE-9040 User ’ s Manual 50 / 55 4.1.6 Advanced Chip set Settings[...]

ADE-9040 User ’ s Manual 51 / 55 4.1.6.1 North Bri dge Configuration You can use this screen to select options for the North Bridge Configuration. Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. Note: The North Bridge Configuration setup screen varie[...]

ADE-9040 User ’ s Manual 52 / 55 4.1.6.1.6 PEG Port This item allows you to cont rol the PEG or on-chip VGA. The choice: [Auto], [Disabled].[...]

ADE-9040 User ’ s Manual 53 / 55 4.1.6.2 South Bri dge Configuration You can use this screen to select options for the South Bridge Confi guration. South Bridge is a chipset on the motherboard that controls the basic I/O functions, USB ports, audio functions, modem functions, IDE channels, and PCI slots. Use the up and down <Arrow> keys to [...]

ADE-9040 User ’ s Manual 54 / 55 4.1.6.2.4 Onboard Giga LAN 1/2 Select “Enabled” if your system has a LAN device insta lled on the system board and you wish to use it. The choice: Enabled, Disabled 4.1.6.2.5 SLP_S4# Mi n. Assertion Width The item allows you to select the assertion width of SLP_S4#. The choice: 4 to 5 sec., 3 to 4 sec., 2 to 3[...]

ADE-9040 User ’ s Manual 55 / 55 4.1.7 Exit Options 4.1.7.1 Save Changes and Exit When you have completed the system configurat ion changes, select this option to leave Setup and reboot the com puter so the new system confi guration parameters can take effect. 4.1.7.2 Discard Changes and Exit Select this option to quit Setup without making any pe[...]