Intel MB890 инструкция обслуживания

MB890 Intel Pentium ® M Mini-ITX Motherboard USER’S MANUAL Version 1.1A[...]

ii MB890 User’s Manual Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Pentium M are registered trademarks of Intel Corporation. Microsoft Windows is a regist ered trademark of Microsoft Corporation. Winbond is a registered trademar[...]

MB890 User’s Manual iii Table of Contents Introduction ....................................................... 1 Product Description ............................................................. 1 Checklist .............................................................................. 2 MB890 Specifications .......................................[...]

iv MB890 User’s Manual This page is intention ally left blank.[...]

INTRODUCTION MB890 User’s Manual 1 Introduction Product Description The MB890 Mini ITX board incorporates the Intel ® advanced 855GME Chipset that contains two core components: the Memory Controller Hub (GMCH) and ICH4. The GMCH integrates a 400MHz Pentium ® M processor front side bus controller, integrated graphics contro ller hub, integrated [...]

INTRODUCTION 2 MB890 User’s Manual Checklist Your MB890 package should include the i tems l isted below. • The MB890 Pentium ® M Mini-ITX m otherboard • This User’s Manual • 1 CD containing ch ip set drivers and flash memory utility • Cable kit (IDE, Power, Audio, VGA CRT)[...]

INTRODUCTION MB890 User’s Manual 3 MB890 Specifications [ CPU Type Micro-FCPGA Intel ® Pentium ® M processor System Speed Up to 1.8GHz CPU Frequenc y 400 MHz CPU Socket Socket 479 Chipset Intel ® 855GME / 852GM chipset BIOS Award BIOS; support ACPI function Cache 1MB Level 2 (CPU integrated) VGA Intel ® 82855GME built-in Intel ® extreme Grap[...]

INTRODUCTION Board Dimensions 4 MB890 User’s Manual[...]

INSTALLATIONS MB890 User’s Manual 5 Installations This section provides inform ation on how to use the jum pers and connectors on the M B890 in order to set up a workable syst em. The topics covered are: Installing the CPU ............................................................... 6 Installing the Memory .....................................[...]

INSTALLATIONS Installing the CPU The MB890 board supports a Socket 479 processor socket for Intel ® Pentium ® M or Celeron ® M processors. The processor socket come s with a screw to secure the processor. As shown in the l eft picture below, loosen the screw first before inserti ng the processor. Place the processor in to the socket by making su[...]

INSTALLATIONS Installing the Memory The MB890 board supports one DDR me mory sockets for a m axim um total m emory of 1GB in DDR mem ory type. The mem o ry m odule capacities supported are 128MB, 256MB, 512MB and 1GB. The following tabl e lists t he supported DDR DIMM configurations. Inte l ® 855GME supports configurat ions defined in the JEDEC DD[...]

INSTALLATIONS 8 MB890 User’s Manual Setting the Jumpers Jumpers are used on MB890 to select various settings and features according to your needs and applica tions. Contact your supplier if you have doubts about the best configurati on for your needs. The following lists the connectors on MB 890 and their respective functions. Jumper Locations on[...]

INSTALLATIONS Jumper Locations on MB890 Jumpers on MB890 ........................................................................... Page JP1: CPU Host Clock .......................................................................... 10 JP2: Power Mode Setting .................................................................... 10 JP3: LVDS Power Se[...]

INSTALLATIONS JP1: CPU Host Clock SEL-0 SEL_1 (JP1) SEL_2 Host Clock 1 0 100MHz (default ) 1 0 133MHz JP2: Pow er Mode Setting JP2 Power Mode Simulate ATX Power Mode (default) AT Power Mode JP3: LVDS Pow er Setting JP3 LVDS Power +3.3V (default) +5V JP4: 1394 Controller EEPROM Write Protect JP4 Function Write Disable Write Enabled 10 MB890 User’s[...]

INSTALLATIONS JP6, JP7, JP8: RS232/ 422/485 (COM2) Selection COM1 is fixed for RS -232 use only. COM2 is selectabl e for RS232, RS-422 and RS-485. The following table describes t he jumper settings for C OM2 selection. COM2 Function RS-232 RS-422 RS-485 Jumper Setting (pin closed) JP6: 3-5 & 4-6 JP7: 3-5 & 4-6 JP8: 1-2 JP6: 1-3 & 2-4 JP[...]

INSTALLATIONS JP11: Clear CMOS Contents JP11 Setting Function Pin 1-2 Short/Closed Normal Pin 2-3 Short/Closed Clear CMOS JP13: Compact Flash Mode Setting JP13 CF Mode Slave Master J13: Intel ® 82541GI Gigabit LAN Enable/Disable J13 Gigabit LAN Enable Disable [ JP14: CPU VCCA Voltage Setting JP14 Setting Function Pin 1-2 Short/Closed 1.8V for Bani[...]

INSTALLATIONS MB890 User’s Manual 13 Connectors on MB890 The connectors on MB890 allows you t o connect external devices such as keyboard, floppy disk drives, hard disk drives, printe rs, etc. The following table lists the connectors on MB 890 and their respective functions. Connector Locations on MB890 ...........................................[...]

INSTALLATIONS Connector Locations on MB890 Connectors on MB890 ........................................................................................................... ............................ Page CN1: DC Jack for DC Adaptor ................................................................................................... .................[...]

INSTALLATIONS CN1: DC Jack for DC Adaptor The DC jack accepts input of 12V or 19V. CN2: PS/2 Keyboard and PS/2 Mouse Connectors PS/2 Mouse PS/2 Keyboard Signal Name Keyboard Mouse Signal Name Keyboard data 1 1 Mouse data N.C. 2 2 N.C. GND 3 3 GND 5V 4 4 5V Keyboard clock 5 5 Mouse clock N.C. 6 6 N.C. CN3: DVI-I Connector Signal Name Pin # Pin # Sig[...]

INSTALLATIONS CN4: Parallel Port Connector Signal Name Pin # Pin # Signal Name Line printer strobe 1 14 AutoFeed PD0, parallel data 0 2 15 Error PD1, parallel data 1 3 16 Initialize PD2, parallel data 2 4 17 Select PD3, parallel data 3 5 18 Ground PD4, parallel data 4 6 19 Ground PD5, parallel data 5 7 20 Ground PD6, parallel data 6 8 21 Ground PD7[...]

INSTALLATIONS COM2 is jum per selectable for RS-232, RS -422 and RS-485. Pin # Signal Name RS-232 R2-422 RS-485 1 DCD TX- DATA- 2 RX TX+ DATA+ 3 TX RX+ NC 4 DTR RX- NC 5 Ground Ground Ground 6 DSR RTS- NC 7 RTS RTS+ NC 8 CTS CTS+ NC 9 RI CTS- NC 10 NC NC NC J2: HDD Pow er Connector Pin # Signal Name 1 +12V 2 Ground 3 Ground 4 5V J3: Internal DC-In [...]

INSTALLATIONS J6, J8: LVDS Connectors (1st channel, 2nd channel) The LVDS connectors on board consist of the first channel (J6) and second channel (J8) and supports 24-bit or 48-bit . Signal Name Pin # Pin # Signal Name TX0- 2 1 TX0+ Ground 4 3 Ground TX1- 6 5 TX1+ 5V/3.3V 8 7 Ground TX3- 10 9 TX3+ TX2- 12 11 TX2+ Ground 14 13 Ground TXC- 16 15 TXC[...]

INSTALLATIONS J16: HDD Pow er Pin Header Signal Name Pin Pin Signal Name Vcc 2 1 Vcc NC 4 3 Ground J17: Mini PCI Socket J18, J19: Primary and Secondary IDE Connectors J18: Primary IDE Connector Signal Name Pin # Pin # Signal Name Reset IDE 1 2 Ground Host data 7 3 4 Host data 8 Host da t a 6 5 6 Host data 9 Host data 5 7 8 Host data 10 Host data 4 [...]

INSTALLATIONS J19: Secondary IDE Connector Signal Name Pin # Pin # Signal Name Reset IDE 1 2 Ground Host data 7 3 4 Host data 8 Host data 6 5 6 Host data 9 Host data 5 7 8 Host data 10 Host data 4 9 10 Host data 11 Host data 3 11 12 Host data 12 Host data 2 13 14 Host data 13 Host data 1 15 16 Host data 14 Host data 0 17 18 Host data 15 Ground 19 2[...]

INSTALLATIONS J21: External Audio Connector J21 is a 12-pin header that is used t o connect t o t he opti onal audi o cabl e card that integrates jacks for Line In, Line Out and Mi c. Signal Name Pin # Pin # Signal Name LINEOUT R 1 2 LINEOUT L Ground 3 4 Ground LINEIN R 5 6 LINEIN L Ground 7 8 Ground Mic-In 9 10 VREFOUT Ground 11 12 Protect pin J22[...]

INSTALLATIONS J25: VGA CRT Connector Signal Name Pin Pin Signal Name R 1 9 +5V G 2 10 GND B 3 11 NC NC 4 12 DDCDAT GND 5 13 HSYNC GND 6 14 VSYNC GND 7 15 DDCCLK GND 8 16 TV out J26: Pow er Connector (for MB890D / MB890FD) Pin # Signal Name 1 PS_ON 2 5VSB 3 +3.3V 4 +3.3V NOTE: MB890D/ MB890FD can use the PW 53 cable to be able to use ATX power. J2, [...]

BIOS SETUP MB890 User’s Manual 23 BIOS Setup This chapter describes the different setting s available in the Award BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction ........................................................................ 24 BIOS Setup .............................................[...]

BIOS SETUP 24 MB890 User’s Manual BIOS Introduction The Award BIOS (Basic Input/Output Sy stem) inst alled in your computer sy stem’s ROM supports Intel processors. The BIOS provides critical l ow-level support for a standard device such as disk dri ves, serial ports and parallel ports . It also adds virus and password protection as well as spe[...]

BIOS SETUP MB890 User’s Manual 25 Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Save & Exit Se[...]

BIOS SETUP 26 MB890 User’s Manual Standard CMOS Setup “Standard CMOS Setup” choice al lows you to record some basi c hardware configurations in your com puter system and set the system clock and error handling. If the m otherboard is already install ed in a working system, you will not need to select this option. You will need to run the Stan[...]

BIOS SETUP MB890 User’s Manual 27 Time The time format is: Hour : 00 to 23 Minute : 00 to 59 Second : 00 to 59 To set the time, hi ghlight the “Time” field and use the <PgUp>/ <PgDn> or +/- keys to set the current time. IDE Primary HDDs / IDE Secondary HDDs The onboard PCI IDE connectors provide Primary and Secondary channels for [...]

BIOS SETUP 28 MB890 User’s Manual Video This field selects the type of video di splay card instal led i n your syst em . You can choose the following video displ ay cards: EGA/VGA For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default) CGA 40 Power up in 40 column m ode. CGA 80 Power up in 80 column m ode. MONO For Hercules or MDA adapters. H[...]

BIOS SETUP MB890 User’s Manual 29 Advanced BIOS Features This section allows you to configure and im prove your system and allows you to set up some system f eatures according to your preference. Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features CPU Feature Press Enter ITEM HELP Virus Warning Disabled Menu Level > CPU L1 and L2 Cac[...]

BIOS SETUP 30 MB890 User’s Manual First/Second/Third Boot Device These fields determine the drive that the system searches first for an operating system . The options availabl e include Floppy , LS120 , HDD-0 , SCSI, CDROM, HDD-1 , HDD-2 , HDD-3 , ZIP100 , USB-FDD, USB-CDROM , USB-HDD and Disable . Boot Other Device These fields allow the system [...]

BIOS SETUP MB890 User’s Manual 31 Security Option This field allows you to limit access to the System and Setup. The default value is Setup . When you select System, the system prompts for the User Password every ti me you boot up. When you select Setup, the system always boots up and prom pts for the Supervisor Password only when the Setup utili[...]

BIOS SETUP 32 MB890 User’s Manual Advanced Chipset Features This Setup me nu controls the configuration of t he chipset. Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features DRAM Timing Selectabl e By SPD ITEM HELP CAS Latency Time 2 Menu Level > Active to Precharge Delay 6 DRAM RAS# to CAS# Dela y 3 DRAM RAS# Precharg e 3 DRAM Dat[...]

BIOS SETUP MB890 User’s Manual 33 DRAM RAS# Precharge This option sets the num ber of cycles required for the R AS to accumulate its charge before the SDRAM refreshes. The default setting for the Active to Precharge Delay is 3 . DRAM Data Integrity Mode Select ECC if your m em ory m odul e supports i t. The m em ory control ler will detect and co[...]

BIOS SETUP 34 MB890 User’s Manual AGP Aperture Size The field sets aperture size of the gr aphics. The aperture is a portion of the PCI mem ory address range dedicated for graphics m emory address space. Host cycles that hit the aperture range ar e forwarded to the AGP without any translation. The default setting is 64M . On-Chip VGA The default [...]

BIOS SETUP MB890 User’s Manual 35 Integrated Peripherals This section sets configurations for your hard disk and ot her integrated peripherals. The first screen shows th ree main items for user to select. Once an item selected, a submenu appears. Details follow. Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals OnChip IDE Device Press[...]

BIOS SETUP 36 MB890 User’s Manual Phoenix - AwardBIOS CMOS Setup Utility SuperIO Device Onboard FDC Controll er Enabled ITEM HELP Onboard Serial Port 1 3F8/IRQ4 Menu Level > Onboard Serial Port 2 2F8/IRQ3 UART Mode Select Normal RxD , TxD Active Hi, Lo IR Transmission Delay Disabled UR2 Duplex M ode Half Use IR Pins IR-Rx2Tx2 Onboard Parallel [...]

BIOS SETUP MB890 User’s Manual 37 USB 2.0 Controller The options for this field are Enabled and Disabled . By default, this field is set to Enabled . In order to use USB 2.0, necessary OS drivers must be installed first. Please update your system to Windows 2000 SP4 or Windows XP SP1. USB Keyboard Support The options for this field are Enabled an[...]

BIOS SETUP 38 MB890 User’s Manual UART Mode Select This field determ ines the UART 2 m ode in your computer. The default value is Normal . Other options include IrDA and ASKIR . Parallel Port Mode This field allows y ou to determi ne parallel port m ode function. SPP Standard Printer Port EPP Enhanced Parallel Port ECP Extended Capabilities Port[...]

BIOS SETUP MB890 User’s Manual 39 Power Management Setup The Power Managem ent Setup allows you to save energy of your system effectively. Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup Power-Supply Type AT X ITEM HELP ACPI Function Enabled Power Management User Define Menu Level > Video Off Method V/H SYNC+Blank Video Off In Su[...]

BIOS SETUP 40 MB890 User’s Manual Video Off Method This field defines the Video Off features. There are three options. V/H SYNC + Blank Default setting, blank the screen and turn off vertical and horizontal scanning. DPMS Allows BIOS to control t he video display. Blank Screen Writes blanks t o the video buffer. Video Off In Suspend When enabled,[...]

BIOS SETUP MB890 User’s Manual 41 Pow er On by Ring This field enables or disabl es the power on of the system through the modem connected to the serial port or LAN. Resume by Alarm This field enables or disabl es the resumption of the system operation. When enab led , the user is allowed to set th e Date and Time . Reload Global Timer Events The[...]

BIOS SETUP 42 MB890 User’s Manual PNP/PCI Configurations This option configures the PCI bus sy stem. All PCI bus system s on the system use INT#, thus all installed PCI cards must be set to this value. Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations Reset Configuration Data Disabled ITEM HELP Menu Level Select Yes if you are using a[...]

BIOS SETUP MB890 User’s Manual 43 PC Health Status This section shows the parameters in determining the PC Health Status. These parameters include tem perat ures, fan speeds and voltages. Phoenix - AwardBIOS CMOS Setup Utility PC Health Status CPU Warning Temperature 85°C ITEM HELP Shutdown Temperature Disabled Menu Level > System Temp. 45°C[...]

BIOS SETUP 44 MB890 User’s Manual Frequency/Voltage Control This section shows the user how to configure t he processor frequency. Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltag e Control Auto Detect PCI Clk Disabled ITEM HELP Spread Spectrum Modulated Disabled Menu Level > Auto Detect PCI Clk This field enables or disabl es the auto [...]

BIOS SETUP MB890 User’s Manual 45 Load Fail-Safe Defaults This option allows y ou to load the t roubleshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high-perform ance features. Load Optimized Defaults This option allows yo u to load the de fault values to your system configuratio[...]

BIOS SETUP 46 MB890 User’s Manual This page is intention ally left blank.[...]

DRIVERS INSTALLATION MB890 User’s Manual 47 Drivers Installation This section describes the in stalla tion procedures for software and drivers under the Windows 98SE, Windows ME, Windows 2000 and Windows XP. The software and drivers are included with the motherboard. If you find t he items missing, please cont act the vendor where you made the pu[...]

DRIVER INSTALLATION Intel Chipset Software Intallation Utility The Intel Chipset Drivers should be i nstalled first before t he software drivers to enable Plug & Pl ay INF support for Int el chi pset com ponent s. Follow the instructions bel ow to complete t he installation under Windows 98SE/ME/2000/XP. 1. Insert the CD that comes with the bo [...]

DRIVERS INSTALLATION 4. Click Ye s to accept the software license agreement and proceed with the installation pro cess. 5. On Readme Inform ation screen, click Next to continue the installation. 6. The Setup process is now complet e. Click Finish to restart the computer and for changes to ta ke effect. When the computer has restarted, the system wi[...]

DRIVER INSTALLATION VGA Drivers Installation To install the VGA drivers, follow the steps belo w to proceed with the installation. 1. Insert the CD that comes with the motherboard. Click Intel Chipsets and then Intel(R) 855GME C hipset Drivers . 2. Click Intel (R) 855GME Chipset F amily Graphics Driver. 3. When the Welcome screen appears, click Nex[...]

DRIVERS INSTALLATION AC97 Codec Audio Driver Installation Follow the step s below to install th e Realtek AC97 Codec Aud io Drivers. 1. Insert the CD that comes with the motherboard. Click Intel Chipsets and then Intel(R) 855GME C hipset Drivers . 2. Click Real tek AC'97 Codec A udio Driver. 3. Click Finish to restart the com puter and for cha[...]

DRIVER INSTALLATION Intel PRO LAN Drivers Installation Follow the steps below to complete the installation of the Intel PRO LAN drivers. 1. Insert the CD that comes with the motherboard. Click LAN Card and then Intel(R) PRO LAN Drivers . 2. Click Install Base Software to cont inue. 3. When prompted, please to restart t he computer for new settings [...]

APPENDIX MB890 User’s Manual 53 Appendix A. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also b ecomes the identity of the d evice. The following table lists the I/O port addresses u sed . Address Device Description 000h - 01Fh DMA Controller #1 020h - 03Fh Interrupt Controller #1 040h - [...]

APPENDIX 54 MB890 User’s Manual B. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request l ines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level Function IRQ0 System Timer Output IRQ1 Keyboard IRQ2 Interrupt Cascade IRQ3 Serial Port #2 IRQ4 Serial Port #1 IRQ5 Reserved [...]

APPENDIX MB890 User’s Manual 55 C. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programm able count. The WDT is suitable for use i n the prevention of system lock-up, such as when soft ware becom es trapped in a deadlock. Under these sort of circumstances, the tim er will count to zero and the [...]

APPENDIX 56 MB890 User’s Manual mov cl, 0F5h call Read_Reg and al, NOT 08h call Write_Reg ;set count mode as second pop ax mov cl, 0F6h call Write_R eg ;set watchdog timer mov al, 01h mov cl, 30h call Write_R eg ;watchdog enabled call Lock_Chi p r e t Enable_And_Set_Watchdog Endp ;[]=============================================== ; Name : Disable[...]

APPENDIX MB890 User’s Manual 57 ; Name : Unlock_Chip ; IN : None ; OUT : None ;[]=============================================== Unlock_Chip Proc Near Mov dx, 4Eh mov al, 87h out dx, al out dx, al r e t Unlock_Chip Endp ;[]================================================ ; Name : Lock_Chip ; IN : None ; OUT : None ;[]=============================[...]

APPENDIX 58 MB890 User’s Manual ; Name : Read_Reg ; IN : CL - register index ; OUT : AL - Value to read ;[]================================================= == Read_Reg Proc Near Mov al, cl mov dx, 4Eh out dx, al inc dx in al, dx r e t Read_Reg Endp ;[]================================================[...]

APPENDIX MB890 User’s Manual 59 D. Digital I/O Sample Code Filename: W 627hf. h //===================================================================== // // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILI[...]

APPENDIX 60 MB890 User’s Manual Filename: W 627hf.cpp //===================================================================== // // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/ OR FITNESS FOR A P[...]

APPENDIX MB890 User’s Manual 61 //===================================================================== // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/ OR FITNESS FOR A PARTICULAR // PURPOSE. //=[...]

APPENDIX 62 MB890 User’s Manual This page is intention ally left blank.[...]